Rural Development Government Departments Closing in 0 days TDR #30960625

Under Jal Jeevan Mission Programme Jamgaon Water Supply Scheme Tal. Sinnar Dist.Nashik

Issued by Government Departments · sinnar, Maharashtra
Tender Value
1.04 Crore
Estimated cost
Bid Submission
17 Feb 2022
0 days left
EMD
1.05 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
sinnar → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Under Jal Jeevan Mission Programme Jamgaon Water Supply Scheme Tal. Sinnar Dist.Nashik

BOQ

Name of Work: Under Jal Jeevan Mission Programme Water Supply Scheme to Jamgaon, Tq. Sinnar, Dist.Nashik
Sl. No. Item Description
1Sub Work No. 1 - Production Well Item No. 1 -Excavation in general in soft material comprisingof soft soil, soft murrum, sand, hard murum with boulders in wet or dry condition for Head Works I.e. intake well, connecting pipe Jack well, pump House, supply well etc. for lift\"0 to 1.5 M & lead \"of 1.50Mincluding barricading, guarding, depositing oft surplus excavated stuff within a radius of 0.5km as directed by Engineer-in-charge-,etc \"complete excluding refilling. Hard Strata Lift 6.00 To 7.50 M
2Lift 7.50 To 9.00 M
3Lift 9.00 To10.50 M
4Lift 10.50 To12.00 M
5Item No. 2 - Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.Note :- 1) The Contractor at his request may allowed to start construction of masonary steining so as not to allow silting of well in oncoming mansoon and while paying masonary, 25% amount shall be withheld and released only when excavation to the full depth is completed.2) Total dewatering charges are to be proposed in tender as lumpsum amount and 75 % is payable for excavation and 25% is payable for construction of well /gallery. Out of 75 % excavation breakup shall be as under 25 % for last 1 Mtr. Depth., 20% for 2 M depth which just above last 1 M depth. 15% for the rest of depth from water table level. The aboe conditions will restrict the tendancy of agencies to avoid deeping of wells etc. to the required depths.
6Item No. 3 - Carrying out recuperation / yeild test for ascerting the discharge of constructed well / excavated profile as direrted by Engineer in charge.The test carried out by drawing down water from the well/ profile below normal / subsoil water level upto full depth rise in water level is recorded. The normal water level / subsoil water level in the well / profile as well as strainer / suction level at pump as per design of W.S. scheme shall be recorded prior. to the test including cost of all materials.overhead,labours etc. completed as directed. The test shall be carried out as per technical circular No.2597 dt. 20/11/97 and shall be carried out for 7 days.
7Sub Work No. 3 - Pumping Machinery Item No. 1 - Providing and erecting and giving test of 100 mm dia submersible pump sets conforming to IS 8034 and motor conforming to9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and bronze impelier .Motor suitable for working on 415v+10% ph 50hz A.C supply with cable guard ,thrust carbon /bed bearing to with stand with cable entire hydraulic thrust,waterproof winding shall be provided .The pump set shall be suitable for direct coupling ,pump shall have suitable out let as per manufactures design ,Anti thrust stream lined non return valve shall be provided with the pump .Suitable valve shall be provided with the pump .Suitable suction strainer shall also be provided .3 core ,single /double run copper conductor submersible type of flat cable 3 m and 2 pairs of erection 65 mm width 10 mm be provided along with thepump rates per pump up to 8 stages are as below. 7.50 HP Pump Sets
8Item No. 2 - Supplying and erecting G.I.Pipe \"B\"Class in position for suction, delivery for centrifugal Pump, vacuum pump and drop for submersible pump including plumbing with socket and necessary material G. I. Pipe 65 mm dia \"B\" Class.
9Item No. 3 - 3 core PVC insulated, PVC sheathed copper conductor flat submersible cable. Supplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed. (3 Core 6 Sqmm)
10Item No. 4 - Providing and fixing M. S. clamps for Holding G. I. Pipe
11Item No. 5 - Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c.Submersible/centrifugal pump set upto 10 HP consisting of Star Delta starter having relay range 6-10 Amp, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc. Automatic Control Panel Board
12Item No. 6 - Providing tools for pumping ( Tools as per rate analysis included in sanctioned estimate.)
13Item No. 7 - Aluminium conductor 4 Core, XLPE / PVC insulated & armoured cable. Supplying and erecting, XLPE / PVC insulated, armoured cable 1100 V grade with ISI mark Four core, solid / stranded aluminium conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm, complete erected on wall / on pole with 25 X 3 mm M.S. clamps or in provided trench in an approved manner.
14Item No. 8 - Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EAEP
15Item No. 9 - Providing, erecting triple spur gear type Chain Pulley Block suitable for capacity as below with 6 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per IS 3832 carrying ISI mark. 1 Tonne Capacity
16Item No. 10 -Providing structural steel work in rolled stanchions fixed with connecting plates or anglecleats, as per drawingsor directedby Engineer in chargeincluding cutting, fabricating, hoisting, erecting, fixingin position making riveted/bolted/welded connections and one coat of anti corrosivepaintsandoverittwocoatsof oil painting, etc.
17Sub Work No. 3 - Pure Water Rising Main Item No. 1 - Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. complete as per IS-1239/2004.100 mm dia GI B Class
18Item No. 2 - Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.110 mm dia 6 Kg/cm2 HDPE Pipes
19Item No. 3 - Providing G.I / PVC specials as per standard specifications & direction of incharge Engineer. Required specials as per bill Only.
20Item No. 4 - Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Sluice Valve 100 mm dia PN 1
21Item No. 5 - Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984) Reflux Valve 100 mm dia PN 1
22Item No. 6 - Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Sluice Valve 100 mm dia PN 1 (For Washout)
23Item No. 7 - Providing and supplying Air valve as per IS 14845-2000and MJP Std Specification of approved make and quality of following dia including all taxes ( Central and local ) rly frieght inspection charges unloading from rly wagon loading in to truck transportatin upto Dept store/ site unloading and stacking etc complete Air valve 50 mm dia PN 1
24Item No. 8 - Excavation for foundation/ pipe trenches in All Types of Strata including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Soil
25Item No. 9 - Excavation for foundation/ pipe trenches in All Types of Strata including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. HMB
26Item No. 10 - Excavation for foundation/ pipe trenches in All Types of Strata including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Soft Rock
27Item No.11 - Excavation for foundation/ pipe trenches in All Types of Strata including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Hard Rock
28Item No. 12 - Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction complete.
29Item No. 13 - Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, giving satisfactory hydraulic test, etc. complete either underground or in vertical position, as directed by Engineer-in-charge.100 mm dia GI B Class pipes
30Item No. 14 - Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II110 mm dia HDPE 6 Kg/cm2Pipes
31Item No. 15 - Lowering, laying, jointing in positionfollowing CIDF Reflux, butterfly valves and sluice valves including cost of all labors jointing material including nutbolts and giving satisfactory hydraulic testing etc complete ( Rates for all class of valves ) Sluice Valve 100 mm dia
32Item No. 16 - Lowering, laying, jointing in positionfollowing CIDF Reflux, butterfly valves and sluice valves including cost of all labors jointing material including nutbolts and giving satisfactory hydraulic testing etc complete ( Rates for all class of valves ) Reflux Valve 100 mm dia
33Item No. 17 - Lowering, laying, jointing in positionfollowing CIDF Reflux, butterfly valves and sluice valves including cost of all labors jointing material including nutbolts and giving satisfactory hydraulic testing etc complete ( Rates for all class of valves ) Sluice Valve 100 mm dia for Washout
34Item No. 18 - Providing and laying in situ following grades of C.C. of trap/granite/quartzite/ gneiss metal for foundation and bedding including dewatering, form work, compacting and curing finishing etc. complete.1:2:4 (M-150 ) grade for encasing
35Item No. 19 - Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines.
36Item No. 20 - Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 proportion 12 mm thick cement plaster in cm 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion15 cm thick slab,etc.complete as directed by Engineer-in-charge. Size 0.90 X 0.60 X 1.20 M
37Item No. 21 - Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.
38Sub Work No. 4- ESR of Capacity 45000 Ltr (Stg. Ht. 12 M)Item No. 1 - Designing (aesthetically), and constructing RCC ground service reservoirs / RCC sumps in M-300 mix. of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top RCC roof slab / or dome, 20 mm thick cement plaster with water proofing compound in CM 1:3 proportion. to inside face of the container, including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 M, all labour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bye-pass arrangement consisting of C.I./ M.S. D/F. pipes, specials and valves of given diameters. (Other Discription is as per Concern DSR)
39Item No. 2 -Providing & supplying ISI standard CI double flanged pipes including all taxes (Central and local), railway freight, insurance , unloading from railway wagon, loading into truck transport to stores/ site, unloading etc. complete as directed by Engineer-in-charge. 80 mm CIDF Pipes
40Item No. 3 -Providing and supplying ISI standard CI flanged / S& S specials including all taxes (Central and local), railway freight, insurance, unloading from railway wagon, loading into truck transport to depermental store/ site, unloading stacking etc. complete. CIDF Pipe Specials
41Item No. 4 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. 80 mm Dia Sluice Valves
42Sub Work No. 5 - Distribution SystemItem No. 1 - Providing ISI mark G.I. pipe of following class and dia. Including all local and central taxes, octroi, inspection charges, transportation to stores, etc. complete .as per IS 1239/200480 mm dia GI B Class
43Item No. 2 - Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). 110 mm dia 4 Kg/cm2 PVC Pipes
4490 mm dia 4 Kg/cm2 PVC Pipes
4575 mm dia 4 Kg/cm2 PVC Pipes
46Item No. 3 - Providing G.I / PVC specials as per standard specifications & direction of incharge Engineer. Required specials as per bill Only.
47Item No. 4 - Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Sluice Valve 65 mm dia PN 1
48Sluice Valve 80 mm dia PN 1
49Sluice Valve 100 mm dia PN 1
50Item No. 5 - Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 meters and lifts as below, stacking and spreading as directed, normal dewatering, prepering the bed for foundation and excluding backfilling, etc. complete. soil
51Item No. 6 - Excavationfor foundation / pipe trenches inHard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer in charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. HMB
52Item No. 7- Excavation for foundation / pipe trenches insoft rock & old cement & lime masonry foundation asphalt road , including removing the excavated material upto a distance of 50 M beyond areaand lifts as below, stacking and spreading as directed, normal dewatering, prepering the bed for foundation and excluding backfilling, etc. complete. Soft Rock
53Item No. 8- Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling, by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. Hard rock
54Item No. 9 - Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction complete.
55Item No. 10 - Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, giving satisfactory hydraulic test, etc. complete either underground or in vertical position, as directed by Engineer-in-charge.80 mm dia GI B Class pipes
56Item No. 11 - Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, giving satisfactory hydraulic testing as per IS code, etc. complete (with cement solvent joint / ring fit joint). 110 mm dia 4 Kg/cm2 PVC Pipes
5790 mm dia 4 Kg/cm2 PVC Pipes
5875 mm dia 4 Kg/cm2 PVC Pipes
59Item No. 12 - Providing and laying in situ following grades of C.C. of trap/granite/quartzite/ gneiss metal for foundation and bedding including dewatering, form work, compacting and curing finishing etc. complete.PCC 1:2:4 (M-150 ) grade for encasing
60Item No. 13 - Lowering, laying, jointing in positionfollowing CIDF Reflux, butterfly valves and sluice valves including cost of all labors jointing material including nutbolts and giving satisfactory hydraulic testing etc complete ( Rates for all class of valves ) Sluice Valve 65 mm dia
61Sluice Valve 80 mm dia
62Sluice Valve 100 mm dia
63Item No. 14 - Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.
64Item No. 15 - Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 proportion 12 mm thick cement plaster in cm 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion15 cm thick slab,etc.complete as directed by Engineer-in-charge. Size 0.90 X 0.60 X 1.20 M
65Sub Work No. 8 - Trial RunItem No. 1 - Commisioning running and maintaining the scheme to quantites, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and 3 months for regional scheme, together with training of personnel spared by MJP/ Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge. Trial Run for 3 Months
66TCL Requirement
67MSEB charges

AI Tender Summary

OUR REF NO 30960625
AUTHORITY Government Departments
TENDER VALUE 1.04 Crore
LAST DATE 17-02-2022
Authority
Authority Name Rural Development Department
Work Description Under Jal Jeevan Mission Programme Jamgaon Water Supply Scheme Tal. Sinnar Dist.Nashik
Basic Detail
Tender No 2021-2022/JJM/TN-04/88-Works
Bidding Type Tender
Location
City sinnar
State Maharashtra
Key Dates
Publish Date 04 Feb 2022
Submission Date 17 Feb 2022
Open Date 19 Feb 2022
Finance
Tender Value 1.04 Crore
Tender Fee 5900
EMD 1.05 Lakhs
Exemption Not Available
Document List
Tendernotice_1.pdf
aa983d64-7803-4b79-abc7-d4387650fa5d.html
BOQ_1316709.xls
DraftTenderPaper.pdf
jamgaon-sinnar.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 04, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Feb 17, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Feb 19, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

Tendernotice_1.pdf

html

aa983d64-7803-4b79-abc7-d4387650fa5d.html

xls

BOQ_1316709.xls

pdf

DraftTenderPaper.pdf

pdf

jamgaon-sinnar.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender