Supply And Installation Of 06 Nos. Of 08 Mtr (100 W X 4 Led Flood Lights) Mini Mastlight Set In Various Places In Alathur Lac, Palakkad. Supply And Installation Of 06 Nos. Of 08 Mtr (100 W X 4 Led Flood Lights) Mini Mastlight Set In Various Places In Alat
Tender Value
6.58 Lakhs
Estimated cost
Bid Submission
11 Feb 2022
0 days left
EMD
16465
Bank guarantee accepted
Document Fee
1554
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
alathur → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supply And Installation Of 06 Nos. Of 08 Mtr (100 W X 4 Led Flood Lights) Mini Mastlight Set In Various Places In Alathur Lac, Palakkad. Supply And Installation Of 06 Nos. Of 08 Mtr (100 W X 4 Led Flood Lights) Mini Mastlight Set In Various Places In Alathur Lac, Palakkad.
BOQ
| Sl. No. | Item Description |
| 1 | Supply installation testing and commissioning of Octagonal Pole made of hot dip galvanised GI sheet 70mm top diameter. 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x16mm suitable for windspeed as per IS 875 Part III fixed head frame including round arm luminary carriage suitable to install 4/6 nos luminaries in symmetrical arrangement including connector foundation bolt 4 nos existing RCC foundation and junction box etc, complete 8 Meters |
| 2 | Installation, Testing and Commissioning of100WLED Flood Light luminaire supplied by SILK. Contractor should take delivery of LED Flood Lights from SILK stores. and also carryout all necessary replacement works during the warranty period of 3 years at site |
| 3 | 90.14.1.2Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) |
| 4 | 90.14.3.2Supply and providing heavy duty \"A\" section neoprene gasket in the panel board U\" section rubber beeding suitable for 1.60/ 2.00 mm sheet |
| 5 | 90.14.5Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board |
| 6 | od245773/2021_2022Supply and fixing of 25A 2 Pole AC 1 rated power contactor, 25A Connector, Digital timer, Suitable Copper socket, 2.5 sq. mm ISI marked FRLS PVC insulated single core copper conductor cable, 1.5 sq.mm ISI marked FRLS PVC insulated single core copper conductor cable, OBO Bettermann makes V25- B+ C/1+ NPE (switching/lightning protection) for single-phase protection.A. 25A 2 Pole AC 1 rated power contactor - 1 eachB. 25A Connector - 1 eachC. Digital timer - 1 eachD. Suitable Copper socket - 4 eachE. 2.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable -8 meterF. OBO Bettermann makes V25-B+ C/1+ NPE (switching/lightning protection) for single-phase protection.G. 1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable - 6 meterH. Labour charge - 1 each |
| 7 | od245774/2021_2022Supply and fixing HRC fuse base of 20/32A using suitable nut and bolt, 32A 2-way neutral links mounted on DMC/SMC base and 2.5 sq. mm ISI marked FRLS PVC insulated single core copper conductor cable.A. HRC fuse base of 20/32A using suitable nut and bolt - 1 eachB. 32A 2-way neutral links mounted onDMC/SMC base - 1 eachC. 2.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable -3 meterD. Labour charge |
| 8 | 2.14.2Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 9 | 2.10.3Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole |
| 10 | 2.10.1Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 11 | 2.12.1Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 12 | 90.6.5.11Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface /recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sqmm |
| 13 | 5.3Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required. |
| 14 | 90.16.4.2Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).25 x 3 mm GI strip |
| 15 | 90.16.1.3Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) |
| 16 | 90.16.5.3Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) |
| 17 | 90.12.5.3Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 10 sq mm |
| 18 | 90.12.9.2Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench 50/38 mm or nearest size |
| 19 | 9.1.2Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 10 sq. mm (19mm) |
| 20 | od245775/2021_2022Charges for KSEB connection including all laison works (Actual Amount paid on production of receipt). |
| 21 | 2.6.1Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil |
| 22 | 4.1.8Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) |
| 23 | 5.9.1Centering and shuttering including strutting, etc. and removal of form for: Foundations, footings, bases of columns, etc for mass concrete |
| 24 | 5.22.6Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 25 | 5.1.2Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size |
| 26 | 13.1.112 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 27 | 2.25Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 28 | Supply and fixing of name board with angles, flats, square pipe, ACP sheet including nut and bolts. 4 nos per mast, 2Sqm in area. |
| 29 | Fabrication ,supply, conveyance and installation of Granite name board indicating the cost involved, the commencement, completion and inauguration date etc. |
AI Tender Summary
Tender Timeline
Feb 04, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 11, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 14, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender