Construction Of Iti Building At Junga Distt. Shimla ( Hp ) . ( Balance Work ) . ( Balance Work ) .
Tender Value
1.35 Crore
Estimated cost
Bid Submission
10 Feb 2022
0 days left
EMD
1.68 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
junga → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Iti Building At Junga Distt. Shimla ( Hp ) . ( Balance Work ) . ( Balance Work ) .
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Feb-2022 | Corrigendum for completion period | Other | 10-Feb-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation, trenches etc. in earth work in all kind of soil lifts. Stacking the excavated soil not more than 3mtrs. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation etc. consolidating of all surplus excavated earth as directed within all leads and lifts disposed earth to be levelled neatly dressed. |
| 2 | Excavation in drains and channelsetc. in earth work including dressing of side & bed & disposing of excavated earth upto all leads & lifts disposed earth to be levelled neatly dressed. |
| 3 | Providing and laying cement concrete 1:4:8 (1cement:4sand:8graded stone agregate 40mm nominal size ) and curringcomplete excluding cost of form work in foundation and plinth. |
| 4 | Stone soling prperly handpacked filling interstices with kharnja stone & consolidatedi/c spreading watering & compaction of binding materials moorum or earth etc. Complete as per HPPWD specification. |
| 5 | Providing from work with steel plates 3.15mm thick weled with angle iron in frame 30x30x5mm so as to give a fair finish including levelling centering, shutteringstrutting and propping etc. With wooden battens and ballies, hight of propping and cenring below supporting floor two ceiling and removal of the same for instu- reinforced concrete and plain concrete work in:- (a) Foundation, footing bases of colums etc. and mass concrete. |
| 6 | b) Columns, pilasrs, post and struts, square, rectangular or polygonal in plain. |
| 7 | c) Beams, cantilevers, girders & lintels, sides & soffits or beams, beam haunchings, cantilvers bressumers and lintels not exceeding 1mtrs in depth. |
| 8 | d) Flat surfaces such as soffits of suspended floors, roofs, landing of the like floors etc. upto 200mm in thickness. |
| 9 | b) Vertical surfacessuch as walls. |
| 10 | Providing & laying cement concrete work 1:1.5:3 (1cement: 1.5sand: 3graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in all height.(a) Foundation footing bases of columns etc. and mass concrete. |
| 11 | b) Columns, pilasrs, posts and struts, square, rectangular or polygonal in plain. |
| 12 | c) Suspending floors roofs landing & shelves and their supports, balconies, beams, girders, bressumers and their cases (except spiral cantilever upto floor two level. |
| 13 | e) Walls (any thickness) attached pilasters, butresses, plinth and string courses etc. From top of foundation level upto all floor level. |
| 14 | Providing tor steel reinforcement for RCC work including bending, binding and placing in postion complete upto floor two level. |
| 15 | Providing & fixing panelled glazed or panelled and glazed shutters for doors windows and clearstory windows including black enamelled iron butt hinges with necessary screws. 40mm thick 2nd.Class Deodar Wood. |
| 16 | Providing & fixing machine made panelled shutters for doors including black enamelled iron butt hinges with necessary screws. 40 mm thick |
| 17 | P/F wire gauge shutters using galvanised M.S. Wire gauge of I.S. Gauge designation 85 G with wire of dia.0.56mm for doors,windows & clerestorey windows i/c bright finished black enamelled iron hinges with necessary screws.30mm thick 2nd class deodar wood. |
| 18 | Providing and fixing anodized aluminium sliding door bolt anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete. (a) 300mm x 16mm. |
| 19 | Providing and fixing aluminium tower bolts (barrel type )anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete. (a)200x10mm. |
| 20 | b)150x10mm. |
| 21 | Providing and fixing aluminium handle anodized transparent or dyed to required colour and shade with nacessry screws etc. complete. (a)125mm. |
| 22 | Providing and fixing oxidized M.S. hooks and eyes 150mm |
| 23 | Providing and fixing hydraulic door closer of GP heavy duty |
| 24 | Brick work using common clay burnt building bricks inFoundation and plinth in cement mortar 1:4 (1cement: 4 sand) 1st class bricks upto all height. |
| 25 | Brick work using common clay burnt building bricks in superstructure avobe ground level in cement mortar 1:6 (1cement: 6 sand) 1st class bricks upto all height. |
| 26 | Half brick thick Honey comb brick work with common burnt clay building bricks in cement mortar 1:4(1cement:4 sand) 1st class bricks |
| 27 | Half brick masonry in comman burnt clay building bricks in superstructure avobe plinth level upto floor two level with cement mortar 1:4(1cement:4 sand) 1st class bricks |
| 28 | 6mm cement plaster in ceiling with cement mortar 1:4(1cement:4 sand). |
| 29 | 15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand). |
| 30 | 15mm cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand). |
| 31 | Providing and laying cement concrete 1:3:6 (1cement:3sand:16graded stone agregate 20mm nominal size ) and curringcomplete excluding cost of form work in foundation and plinth. |
| 32 | Kota stone slab flooring 20 mm ( average) thick base of cementmortar 1:4 (1 cement : 4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete. 25mm thick |
| 33 | Kota stone slab 25 mm thick in risers of steps, skirting dado and pillars laid on 12 mm thick cementmortar 1:3 (1 cement : 3 sand)and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete. 25 mm thick |
| 34 | Providing and laying spartic ceremic tiles 5.5mm thick in flooring 300x300mm size on treads of steps laid on a bed of 12mm thick cement mortar 1:3(1cement:3sand) finished with flush pointing in white cement. |
| 35 | Digital Wall tiles 10mm thick in skirting risers of steps and dado 12mm tick cement mortar 1:3(1cement: 3sand) and jointed with cement slurry. (Premium quality). |
| 36 | Providing & laying vetrified tiles (600x600mm x 10mm) in grey coloured or of approved shade in flooring treads steps and landing laid on a bed of 12mm thickcement mortar 1:3(cement :3sand) laid over and jointed with neat cement slurry.Kajaria/ Orient Make. |
| 37 | P/L Granite Stone in flooring 20mm thick base in Cement Mortar 1:3 (1 Cement : 3 Sand) i/c jointing with grey cement slurry mixed with pigment to match the shade of pigment to match the shade of granite stonei/c rubbing and polishing complete 20mm thick. |
| 38 | Providing and fixing M.S. grills of required patterns in woodan frames of windows etc. With M.S. flats, square or round bars with round headed bolts and nuts or by screws. Plain grill. |
| 39 | Steel work welded in built, up saction in trusses and framed work including cutting hosting fixed in position & applying a priming coat of red lead paint in :- a)In trusses and trussed purlins. For Roof |
| 40 | b) In grating framed guard, bars ladders, railing, brackets and similar works. |
| 41 | Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia mter with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-Charge. |
| 42 | Providing and fixing ridges or hips 60cm over all with 0.60mm thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating back coat of polyster of 5 microns over 5 microns primer coat ing including fixing with prepainted iron j or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge. |
| 43 | Providing & fixing M.S. BP sheet 1.66mm to 2mm thick in eaves board/ facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured & paid separately). |
| 44 | Providing and fixing 15cm wide 45cm over all semicircular plain GI sheet gutter with iron brackets 40x3mm size bolts and nuts and washers making necessary connection with rain water pipe as per design (a) 0.63mm thick sheet |
| 45 | Providing plinth protection under layer of 75mm thick bed of dry brick/stone aggregate 40mm nominal size well ramed and consolidated and grounded with fine sand including prepration of ground finished with 50mm thick cement concrete 1:3:6 (1cement:3sand :6graded stone aggregate 20mm nominal size.) |
| 46 | Applying priming coat over new wood and wood based surface after and including prepairing the surface by thoroughly cleaning oil, dirt and other foreign matters sand papered knotting. Ready mixed pain brushing wood primer pink. |
| 47 | Painting two coat (excluding priming coat) on new wood and wood based surfaces with readymixd paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter sand pepering and stopping with ready mixed paint. (a) White paint. |
| 48 | Applying priming coat over new steel and other matel surfaces after and including prepairing the surface by thoroughly cleaning oil grease, dirt and other foreign matters sand papered knottingReady mixed pain brushing red oxide/zink oxide chrome. |
| 49 | Painting two coat (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint otyher than white. |
| 50 | Applying birla white wall care putty over plaster surface after thoroughly brushing the surfacefree from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final metter finish to the surface complete. |
| 51 | Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly Surface free from mortar dropping brushing the and other foreign matter and sand papered smooth including applying of putty a required for metling the surface |
| 52 | Painting two coats (excluding priming coat)on new concrete / masonry/plastered surfaces with enamel paint of approved brand and manufacture for use on floors to give an even shade,including cleaning of all dirt,dust and other foreign matter and sand papering as required |
| 53 | Finishing wall with Apex of Asian brand and manufacture and of required shade on decorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials. |
| 54 | Cement concrete flooring 1:2:4 (1cement: 2sand: 4graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement 40mm thick. |
| 55 | Applying cement slurry on Cement concrete work using 2.75kg of cement per sq. Meter of floor/wall complete in all respect. |
| 56 | Supplying and fixing rolling shutters of approved make and made opf 80mmx1.25mm MS laths interlocking together through their entire length and joined together at the end by locks mounted on specially designed pipe shaft, with brackets side guides and arrangement for inside and outside locking with push pull operstion complete but excluding the cost of the top cover and spring shutters having width above 3.5 metres |
| 57 | Providing and fixing 27.50 centimeter long wire spring grade No.2 for rolliing shutter. |
| 58 | Providing and fixing ball bearing for rolling shutters |
| 59 | Providing and fixing top cover for rolling shutters shutters having width below 3.5 meters |
| 60 | Providing and fixing in position collapsible steel shutters with vertical channels 20mmx10mmx2mm abd braced with flat iron diagonals 20mmx5xx size with top and bottom rails of T-iron 40mmx40mm stoppers, handles, including apllying a priming coat of red lead paint. |
| 61 | Supplying and fixing of Glass panes 5mm thick with beading and nails complete |
| 62 | Providing and fixing Stainless Steel Railing in stairs, open space and balcony with master pillar of round pipe 80mm dia at ends/corners and square/ round hollow bars vertical/ horizontal as per the drawing/design of railing provided. |
| 63 | Providing and fixing Powder coated anodized aluminium work for doors windows, vantilators and partition with extruded build up standerd tubular and other section of approved make conforing to IS 733 & IS 1285 anodized transparent or dyed to required shade. Sealing all the Gaps with Silicon (a) For doors, windows, ventilator & glazed partition frame. |
| 64 | b) For shutters of doors and windows. |
| 65 | Providing and fixing preliminated board both side. BWP (boiled water proof) phenol bonded exterior/interior grade 12mm thick. |
| 66 | Providing and fixing transparent plain toughned glass (a) 6mm thick. |
| 67 | Providing and fixing on wall face PVC (D-plast) rain water pipes for working pressure not less than 4.5kg/sqm i/c filling the joits with the approved adhisives completeofPhinolex/ D-plast(a)150mm |
| 68 | Providing and fixing PVC pipe spigot and socket soils waste and ventilating pipes lead caulked joints to be measured and paid for separately ofPhinolex/ D-plast. (a)110mm |
| 69 | b)75mm |
| 70 | P/f P.V.C. Fittings and accessories of Phinolex/ D-plast (a) P/fPVC plain bend ISI marked including fixing with approved adhesives etc. Complete 150mm dia |
| 71 | b) P/fPVC plain bend ISI marked including fixing with approved adhesives etc. Complete 110mm dia |
| 72 | c) P/fPVC plain bend ISI marked including fixing with approved adhesives etc. Complete 75mm dia |
| 73 | d)P/fPVC Sinlge equal branch of required dergree ISI marked including fixing with approved adhesives etc. complete110mm |
| 74 | e)P/fPVC Sinlge equal branch of required dergree ISI marked including fixing with approved adhesives etc. complete75mm |
| 75 | Providing and fixing PVC clamps ISI marked of approved design with steel screws and raw plugs etc. complete. (a)150mm |
| 76 | b)110mm |
| 77 | c)75mm |
| 78 | Providing and laying in trenches theGalvanised mild steel tubes(medium grade), tube fittings (earth work in trenches to be measured and paid for seperate)20mm nominal bore minimum weight 1.22 kg/rmt jindal/ Tata make |
| 79 | Providing and fixing to wall ceiling and floor G.I. pipe(Medium Grade) 15mm dia. With fittings and clamps i/c making good the wall, ceiling and floor |
| 80 | Making connection of galvanized mild steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixingtee including cutting and treading the pipe complete. |
| 81 | Providing & fixing pvc floor trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete i/c cost of cutting & making good the walls and floors. 110mm nominal dia. |
| 82 | P/F vitreous china wash down water closet (European type, W.C. Pan) with integral \"P\"or \"S\"trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement:1 Sand) Ordinary Type complete. |
| 83 | Providing and fixing PTMT Coloured / white high density polythelene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittingswith a pair ofbrackets with fittings such as lead valve, syphon, 15mm nominal size PVCball valve with polythene float,with push button,couplingsfor connections with inlet, outlet and ovrflow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow) pipe to be measured and paid for separately . |
| 84 | P/f plastic seat and cover for wash down water closet with CP brass hinges and rubber:- solid type coloured plastic seat cover |
| 85 | Providing and fixing water jet for water closet complete with all fittings such as Connection pipe. |
| 86 | Providing and fixingstainless steel kitchen sink of approved standard ISI make with drain board and C. P. waste with CI or MS Brackets painted white including cutting holes and making good the same but excluding fitting. 610x460 mm with bowl depth 200mm. |
| 87 | Providing & fixing vitreous china wash basin with pair of hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings flat back 630 x450mm of reputed make. (Hindware/ Parryware make). Hindware/ Parryware make. |
| 88 | Providing & fixng CP Brass waste for wash basin or sink 32mm dia. |
| 89 | Providing & fixng PVC waste pipe for wash basin or sink 32mm dia. |
| 90 | Providing & fixing 100mm sand cast iron grating for gully, floor or Nahni trap. |
| 91 | Providing & fixing 600 x 450mm bevelled edge mirror of superior glass mounted on 6mm thick AC sheets or plywood sheet and fixed to wooden plugs with CP brass screws and washers. |
| 92 | Providing and fixing C.P. brass towel rail complete with C.P. brass bracket fixed to wooden plugs with C.P. brass screws. 600mm x 20mm. |
| 93 | Providing & fixing CP brass Pillar tap with capastan head 15mm dia. |
| 94 | Providing & fixing CP brass bib tap with capastan head 15mm dia. |
| 95 | P/F C.P. brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws. |
| 96 | P/F C.P. brass angle valve 15mm without Nuts and pipe. |
| 97 | P/F brass stop cocks:((a) 15mm dia |
| 98 | (b) 20mm dia |
| 99 | Providing & fixing PVC connection pipes with brass unions 45cm lenght 15mm nominal bore. |
| 100 | Providing and fixing G.I. or M.I. unions. 15mm dia. |
| 101 | Providing and fixing white glazed fireclay half stall urinal (450x600mm) withC.P. Brass flush pipe spreaders with unions and clamps (all in C.P. Brass) C.I. Trap with outlet grating and other coupling in C.P. brass including painting of fittings, cutting and making good the walls and floors where required: Single Stall half pattern urinals . |
| 102 | Providing and fixing Division Plate for urinals 600mm x 300. Vitreous China |
| 103 | Providing and fixing PVC water storage tank G.I. Inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement i/c hoisting upto all heights above ground level: 1000 ltrs. net Capacity tank. |
| 104 | Providing & fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked i/c fixing with approved adhesive etc. Complete.i)150 mm dia. |
| 105 | Constructing manhole with RCC top slab in 1:2:4 (1cement: 2sand: 4graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 (1cement: 4sand: 8graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement: 3sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement: 2sand: 4graded stone aggregate 20mm nominal size) finished smooth complete including curing complete and testing. Inside size 800 x 800mm and 500mm deep including RCC cover and frame medium duty 500mm internal dia with 200mm thick walls of brick masonary using common burnt clay building bricks in cement mortar 1:3 (1cement: 3sand) complete. |
| 106 | Supllying and fixing RCC fiber cover with frame for manhole for 560mm internal diameter. |
| 107 | Providing and fixing PVC cowl. 100mm nominal size |
| 108 | Providing and laying brick aggregate 40mm thick in soak pit |
| 109 | Cutting in earth work and disposal of excavated earth upto all leads and lifts. |
| 110 | Excavation in foundation, trenches etc. in earth work in all kind of soil lifts upto 1.50 mtrs. Stacking the excavated soil not mkore than 3mtrs. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation etc. consolidating of all surplus excavated earth as directed within all leads and lifts disposed earth to be levelled neatly dressed. |
| 111 | Providing and laying cement concrete 1:6:12 (1cement:6sand:12graded stone agregate 40mm nominal size ) and curringcomplete excluding cost of form work in foundation and plinth. |
| 112 | Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden battens and ballies, height of propping and cenetering below support floor to ceiling in a height and removal of the same for in-situ reinforce concrete work and plain concrete work in :- (a)Vertical surfaces such as walls (any thickness) partitions and the like i/c attached pilasters buttresses, plinth and string courses and the like. |
| 113 | Providing and laying cement concrete 1:3:6 (1 cement : 3sand : 6 Graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth in breast and retaining walls, mass concreting etc. |
| 114 | Providing and Fixing weep Hole with 90mm thick PVC pipe |
| 115 | Stone filling behind r/wall. |
| 116 | Providing and laying heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M- 30 grade i/c border or kurb block gray or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1cement:4sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curring rubbing & polishing complete (sub base concrete floor to be paid for separately) bedding sand thickness 25mm as per MoRD specifications (clause- 1504) average 28 days strength of 8 blocks as 30 MPa & strenght of indivisual block not less than 26 Mpa (Clause 1504).80mm thick |
| 117 | Providing and fixing plain prepainted GI sheet in ceiling with all required accessories of approved quality and shade complete in all respect (Base members of steel work shall be measured & paid separately). |
| 118 | Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous Chinaincluding carriage of material within all leads and lifts. |
AI Tender Summary
Tender Timeline
Feb 09, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Feb 10, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedFeb 10, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 11, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender