Grama Panchayat has published KODASSERY GP-Anganwadi no.43&54,Mini MCF,SHG work shed -Anganwadi Work 43 And 54 And Mini Mcf And Shg Workshed Anganwadi Work 43 And 54 And Mini Mcf And Shg Workshed , Anganwadi No.43&54, Mini Mcf, Shg Work Shed , Stone For Masonry Work , Through . Submission Date for this Tender is 18-02-2022. Coats and Jackets Tenders in kodassery Kerala. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Anganwadi no.43&54,Mini MCF,SHG work shed |
2 | Stone for masonry work |
3 | Through and bond stone size 24x24x39cm |
4 | Portland cement |
5 | Royalty for good earth |
6 | Coarse sand(zone 3) |
7 | Stone aggregate 40 mm |
8 | Stone aggregate 20mm |
9 | Hire charge for Concrete mixer |
10 | Vibrator (needle 40 mm) |
11 | Structural steel such as tees,angles,channels |
12 | Red oxide zinc chromate primer |
13 | Adjustable telescopic prop 3 m |
14 | Beam clamp 300-380mm |
15 | Wall for panel 1250x500 mm |
16 | Corner angle 45x45x5 mm 1.5m long |
17 | 100 mm Channel shoulder 2.5m long |
18 | Double clip |
19 | Single clip |
20 | M S Tube 40 mm dia |
21 | Wall for panel 1250x450 mm |
22 | Corner angle 45x45x5 mm 2.5 m long |
23 | Column clamp 450x1070 |
24 | prop 2m (2-3.5m) |
25 | Second class kailwood in planks |
26 | Second class kailwood in scantling |
27 | Hollock ballies 125 mm dia |
28 | Adjustable span ESO+SI (2.35-3.40) |
29 | Stone aggregate (single size) 10mm |
30 | Twisted steel/deformed bars |
31 | Solid block of size 30x20x15 cm |
32 | Anjili wood scantls |
33 | Mild steel round bar above 12 mm dia |
34 | Flats up to 10mm thickness |
35 | Rawl plug 50mm (designation 10 nos) |
36 | Float glass sheets of nominal thickness 4 mm |
37 | Bright finished or black enameled ms hinges 100x58x1.90mm |
38 | Bright finished or black enameled steel butt hinges 50x37x1.50 |
39 | Bright finished or black enameled steel Screws 40 mm |
40 | Bright finished or black enameled steel Screws 20 mm |
41 | Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded |
42 | 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished |
43 | Powder coated M.S butt hinges 100 x58x1.9 mm |
44 | Anodised aluminium towern bolt (barrel type) 300x10mm |
45 | Chromium plated Brass screws 30 mm |
46 | 200 mm aluminium aldrop |
47 | Anodisedaluminum handels 125 mm with plate 175x32 mm |
48 | Chromium plated Brass screws 25 mm |
49 | Brass hard down hookes and eyes 150 mm |
50 | Fine sand (zone 4) |
51 | satna lime |
52 | Ceramic glazed tiles 1st quality 300x300 in allshades and design ofwhite, Ivory, grey,Fume red, brown etc |
53 | Ceramic glazed tiles 1st quality minimum thickness 5 mm in all colours shades and design except burgundy, bottle green black |
54 | Vitrified floor tile 60x60 cm |
55 | Deharadun whitw lime |
56 | Pink primer (for wood) |
57 | Synthetic enamel paint in black or choclate shade |
58 | Plastic emulsion Paint |
59 | Inter locking C.C paver block (80 mm thick,M-30) |
60 | Black plastic seat (solid) with lid C.P brass hinges and rubber buffers |
61 | Vitreous china pedestal type water closet |
62 | Flushing cistern P.V.C 10 its capacity (low level) (white)(with fittingsm, accessories and flush pipe) |
63 | Vitrous china flat back washbasin 550x400 |
64 | 15 mm C.P brass tap |
65 | C.P brass waste 32 mm |
66 | C.I Bracket for wash basin and sinks |
67 | Stainless steel Kitchen sink- with out drain board 470x420 mm bowl depth 178 mm |
68 | Polythene water storage tank cover and suitable locking arrangement |
69 | PVC Pipe 20 mm outer dia 10 kgf/cm2 |
70 | PVC Pipe 50 mm outer dia 6kgf/cm2 |
71 | PVC Pipe 110 mmouter dia 6kgf/cm2 |
72 | Mild steel tubes hot finished welded type |
73 | Welding by electric plant |
74 | G.I Trafford sheet 0.35 |
75 | Bitumen washer |
76 | G.I Limpet washer |
77 | Galvanised steel J or L hooks 8 mm dia |
78 | Galvanised steel bots & nuts 6mm dia and 25 mm long round head with slots |
79 | Green net 75% shade |
80 | Galvanised wire mesh of average width of aperture 1.4 and nominal dia of wire 0.63 |
81 | Wire nails |
82 | G .I Pipes 50 mm dia |
83 | G.I Pipes 40 mm dia |
84 | Epoxy paint |
85 | Mason (for plain sone work) 2nd class |
86 | Bhisti |
87 | Mason (average) |
88 | Blacksmith 2nd class |
89 | Carpentar 2nd class |
90 | Mason(brick layer) 2nd class |
91 | Carpenter (average) |
92 | White Washer |
93 | Assistant Fitter or 2nd class fitter |
94 | Bandhani |
95 | Fitter ( grade 1) |
96 | Painter |
97 | Black smith 1st class |
98 | Mason (brick layer) 1st class |
99 | Glazier |
100 | Carpender 1st class |
101 | mistry |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail