Construction Of Hygienic Fish Market At Pathali Pahar Gaon Panchyat.
Tender Value
34.75 Lakhs
Estimated cost
Bid Submission
17 Feb 2022
0 days left
EMD
69510
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bihpuria → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Hygienic Fish Market At Pathali Pahar Gaon Panchyat.
BOQ
| Sl. No. | Item Description |
| 1 | CONSTRUCTION PART OF FISH MARKET |
| 2 | Earth work in exacvation for foundation trenches of walls, retaining wall etc. |
| 3 | Earth/ sand filing in plinth in layers not more than 150mm thick including necessary carriage watering ramming etc. Complete |
| 4 | Pre construction anti-termic treatment at bottom of foundation pits and walls on meither side up to a height of 300mm from bottom of the excavation |
| 5 | Providing soling in foundation and under floor at all level with stone / best quality picked jhama bricks, sand packed and laid to levels etc. |
| 6 | Plain cement concrete work with course aggregate of size 13-32mm in foundation bed for foting step... Etc prop 1:3:6 |
| 7 | Providing & laying plain reinforced cement concrete work cement with coarse sand and 20mm downgraded stone aggregate including dewatring if necessary- etc i) using mixuture machine, in sub- structure up to PL foundation footings, columns with loose tie and plinth beam etc. upto pl |
| 8 | Supplying fitting and fixing in position reinforcement bars conforing to relevent IS code for RCC work/RB walling etc. |
| 9 | Providing from work of ordinary timber planking so as to give a rough finish including centering, shuttering etc. Foundation, footing, bases of column etc |
| 10 | Sides of tie beam |
| 11 | Brick work in cement mortar with 1st class brick including racking out joints etc. 1:4 |
| 12 | 65mm thick floor consisting of 50m,m under of cement concrete in prop 1:3:6.... Etc. |
| 13 | Providing plinth protection with brick laid on edge grouted with cement mortar 1:4 and finished with cement pointing in 1:1 complete. |
| 14 | Providing drain with brick work refilling the sudes after completion as directed.ii) 300mm wide and av. 25mm deep |
| 15 | Providing and laying 25mm thick DPC with cement concrete in prop 1:2:4.... Etc. |
| 16 | FROM PLINTH LEVEL TO 1ST FLOOR LEVEL |
| 17 | Providing and laying plain/RCC work in prop 1:2:4 in super structure |
| 18 | Providing from work of ordinary timber planking so as to give a rough finish including centering, shuttering etc. Foundation, footing, bases of column etc. |
| 19 | Sides and soffits of beam, lintel etc. |
| 20 | Flat surface floors roof landing... Etc. |
| 21 | Stair case with slopping gor steped soffits raise stringers etc. |
| 22 | Supplying fitting and fixing in position reinforcement bars conforing to relevent IS code for RCC work/RB walling etc. |
| 23 | Supplying fitting fixing made of MS equal angle of size- 40x40x5mm fabricated welded etc. |
| 24 | Providing fitting and fixing flush door shutters soil core construction with frame of 1st class gword etc. |
| 25 | Providing fitting and fixing anodised aluminium windows and ventilators etc. |
| 26 | Providing fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brands without horizontal glazzing bars joint etc Windows = 3x1.00 = 3m2 @ 4766.85 m2etc. |
| 27 | Providing fitting and fixing of MS grill of required pattern for pattern for windows/CS windows/ opening with MS flats at required spacing in frame all around. Ornamental grill. |
| 28 | Providing and fixing rolling shelter of approved make made of 80mm wide MS laths interlocked together though their entire length ... Etc. |
| 29 | 112mm thick 1st clas brick nogged wall in cement mortar including racking out joint etc. In cement mortar 1:5 |
| 30 | 15mm thick cement plaster in single coat on rough side of brick/concrete wall of interior plastering upto 1st floor level. Etc. 1:4 |
| 31 | 15mm thick cement plaster in single coat on fair side of brick wall etc. |
| 32 | Extra over item 6.2.1.6.2.3 on ceilling and csoffits of stair upto 1st floor level etc. |
| 33 | Providing polished gems concrete/ sunrock hi-CTS files of approved quality size, shapes and thicknes not less than 18mm on foors and skirting over amount mortar bed 10mm thick in prop 1:3... Etc. |
| 34 | 18mm thick marble stone files in flooring including rises and treads of steps skiting, etc base of cement plaster in prop 1:3 etc. |
| 35 | Providing polished ceramic wall file of approved quality, size shape and thickness not less than 8mm on wall and skirting over cement mortar bed 10mm thick in prop 1:3 |
| 36 | Providing polished granite slab of approved quality size, shape and thickness not less than 18mm on floor skiring etc. |
| 37 | Applying one coat of cement primer of approved brand and manufacturer or new wall surface after throughly brooming the surface free- etc. |
| 38 | Providing two coats of JK wall puty and directed. |
| 39 | Finish wall vwith water oroofing weater coat smooth anti fungel exterior paint of acc brand of asian paint.outside only. |
| 40 | Wall painting with acrylic emulsion paint approved brand and manufacturer etc. |
| 41 | Applying priming coat over new wood based surface over 100mm in girth width after and including preparing the surface by throughly cleaning oil, grease, dirt. Etc |
| 42 | Painting two coats on new wood and wood based surface with enamal paint.4.387 |
| 43 | Applying priming coat over new steel and other metal surface. With ready mixed red led/ red oxide primer |
| 44 | Painting two coat on new metal or metal surface with enamal paint... Etc. |
| 45 | SUB-ESTMATE FOR 1ST FLOOR TO SECONED FLOOR LEVEL |
| 46 | Providing laying plain / RCC works in 1:2:4 including curing complete. |
| 47 | Extra for 1st floor level to 2nd floor level |
| 48 | Providing from work of ordinary timber plank so as to rough finish including centering & shuttering. |
| 49 | Extra for 1st floor level to 2nd floor level |
| 50 | Supplying fitting and fixing in position reinforcement bars conforming to relevent IS code for RCC work etc. 16mm= 63.20 kg, 12mm= 105kg, 8mm dia stirup=81.46kg, |
| 51 | 112mm thick 1st clas brick nogged wall in cement mortar including racking out joint etc. In cement mortar 1:5 |
| 52 | Extra for 1st floor level to 2nd floor level etc. |
| 53 | 15mm thick cement plaster on brick wall |
| 54 | Extra for 1st floor to 2nd floor level |
| 55 | Finish wall with water proofing weather cost smooth anti fungel exterior painting of ace brand of asian paint and required shade etc. |
| 56 | Providing fitting and fixing of roof trusess including purlins fabricated MS circular hollows section conforming to relevent IS code etc. |
| 57 | Providing corrugated glaved ironsgeet roofing include fitting and fixing necessary J or L hooks, bolt and nut etc. 0.45mm thick. |
| 58 | ELECTRIFICATION |
| 59 | Wiring for light/ fan/ call bell point with 2x1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing \"n\" capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 6 Amp flush type switch/ bell push (Anchor Penta/Gold medal /Kolor kany.Kom/ Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover ,ceiling rose(Anchor/Gold medal /Kolor kany.Kom / Havells or equivalent make as approved by the Deptt.) etc. complete as directed and specified by the Deptt.Short point up to 3.00 metre. length. |
| 60 | Medium point up to 6.00 metre. Length. |
| 61 | Long point up to 10.00 metre. Length. |
| 62 | Wiring for light/ fan/ call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing \"n\" capping (AKG / Precision/ Presto Plast/ Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)GI/ MS switch board (ISI marked) with phenolic laminated sheet cover, ceiling rose etc. complete as directed and specified by the Deptt. Long point up to 10.00 metre. Length. |
| 63 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mmISI marked casing \"n\" capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. marked)with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm.cable to third pin of the plug socket etc. as required complete, when placed elsewhere.Short point up to 3.00 metre. length. |
| 64 | Medium point up to 6.00 metre. Length. |
| 65 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing \"n\" capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including providingand fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.),GI/ MS switchboard (I.S.I. marked)with phenolic laminated sheet cover earth continuity with 2.5 sq. mmcableto the 3rd pin of the socketas required complete. Short point up to 3.00 metre. length. |
| 66 | Medium point up to 6.00 metre. Length. |
| 67 | Long point up to 10.00 metre. Length. |
| 68 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing \"n\" capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm.in flat 19 mm ISI marked casing \"n\" capping system. |
| 69 | With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm.cable in flat 19 mm ISI marked casing \"n\" capping system. |
| 70 | Supplying and fixing of batten holder (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) including connection as approved by the Deptt.)as required Without Lamp |
| 71 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted Single door surface mounting MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.ABB, Schneider MG, legrand, Hagermake). 4 way SPN single door |
| 72 | Supplying installation ,testing and commissioning of striplite luminer lumineries complete with electronic ballast and 1X40W flourscent tube. |
| 73 | Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/ pendent holder etc. as specified and directed by the deptt. |
| 74 | Supplying including fitting fixing of followingA.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator]. Premium model1200 mm Sweep (ORIENT PSPOmake) / Premium model 1050 /1200 mm Sweep SS-390 Deco Havellsmake) |
| 75 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts( Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in ISI marked hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.) including earth continuity in surface/ recessedconduit wiring system. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. cable in 20 mm. dia. ISI marked hot dip galvanised pipe |
| 76 | Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipewith necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mmhinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . |
| 77 | Extra for using salt (5 Kand Charcoal (64 Kin pipeEarth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt. |
| 78 | Supplying & laying of 8 SWG Copperearth drawn through 15 mm dia. Medium quality G.I. pipe from Earth Electrode (below G.L.)to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. |
| 79 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 6 to 32 A |
| 80 | Supply , installation ,fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS:2171 with ISI mark and CO2 cartidge will be confirming to IS:4947 with ISI mark,powder will be confirming to IS :4308 with ISI mark (5Kg)Brand:FIRESTOP/FIREND/FIRE SHIELD |
| 81 | Cutting including threading and fitting of G.I. pipeheavy gauge down rod for ceiling fans etc. as required (Labour charge) |
| 82 | 2 HP three Phase Centrifugal monoblock pump set (Crompton Greaves/ Aquatic/ CRI/ V-Guardmake)2900 rpm A class insulation with DOL Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemensmake) . |
| 83 | APDCL service connection |
| 84 | CONSTRUCTION OF APPROACH ROAD |
| 85 | Providing soling in foundation and under floorwith stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labourand materials and if necessary dewatering, complete. (a).Brick on flat soling. 100.00 X 3.00 =300.00 Sqm |
| 86 | 65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed. 100.00 X 3.00=300.00 Sqm |
| 87 | OUT-SIDE LATRINE |
| 88 | Earth work in excavation for foundation tranches of wall, retaining walls, footing of columns, step,septic tank etc. including refilling the quality as necessary after completion…...(a) In ordinary soil |
| 89 | Providing soling in foundation and under foot at all levels with stone/ best quality picked jhama bricks sand packed and laid to level and in panel preparing the subgrade as directed including all labour and all materials and if necessary dewatering, complete. (a) Brick on flate soling |
| 90 | Plain cement concrete work with course agg. Of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick work etc. (a) In prop.1:3:6 |
| 91 | Supplying fitting and fixing in position reinforcement bars conforming to relevent Iscode of RCC/RB walling includiing streightning, cleaning, cutting( a) ISI approved TMT bar |
| 92 | ( b) ISI approved MS Rod |
| 93 | Providing form work of ordinary timber planking so as to give arough finish including centering, shuttering, strutting and proping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: (a) foundation,footings, bases of columns, pile cap, raft and mass concrete works etc. (i) using 25mm thick plank |
| 94 | Column, Pillar,Post,Struts…..(a) Square, Rectengular, Polygonal in plan or any shape like Tee/L etc. having plan vertical face (i) using 25mm thick plank |
| 95 | Providing and laying plain/ reinforced cement concrete work in prop. 1:1.5:3 (a) In substructure up to plinth level Foundation footing columns with base, tie and plinth beam (b) M20 prop. 1:1.5:3 |
| 96 | (B) In super structure from plinth level up to 1st floor level. (ii) Columns, Pillars, posts, struts,suspended floors (b) M20 prop. 1:1.5:3 |
| 97 | Brick work in cement morter with 1st class brick including racing out joints and dewatering if necessary and curing complete as directed in sub structure up to plinth level. (a) In prop 1:4 |
| 98 | Earth/ sand filling in plinthin layers not more than 15mm thick including necessary carriage, watering, ramming etc complete as directed and specified including payment of land compensation, forest roalty, sales taxes and other duties and taxes as may be necessary (c ) with river sand or soil |
| 99 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding MS rod/ Torsteel of…(a) 112mm thick brick wall (b) In cement mortar in proposition 1:4 |
| 100 | Plaincement concrete floor base in prop 1:3:6 laid in alternate bays as specified with coarse agg. Of size 13mm to 32mm including dewatering if necessary, and curing etc. complete.. |
| 101 | Complete plaster skirting with cement mortar in prop. 1:3 ( 1 cement : 3 coarse sand) finished with a neat coat of cement including round of junctions with floor. (a) 15mm thick |
| 102 | Providing wood work in frame (chowkaths) of doors, windows,clearstory windows and other similar works wrought, framed and fixed in position in contact with C.C. or brick masonry wall including supplying , fitting and fixing (b) With 1st class timber ( Bonsum/ Sundi) |
| 103 | Providing fitting and fixing full panelled doors and windows including oxidised M.S. butt hinges (100mm x 75mm x 3.5mm) with necessary screws (other fittings to be measured and paid seperately). (b) with 1st class local wood (Gamari/Hollock/ Bonsum) (ii) 35mm thick |
| 104 | Providing ceramic tiles of approved quality, size and shape and thickness not less than 8mm on floors, skirting, treads and risers of steps over cement mortar bed 15mm thick in prop. 1:3 (1 cement : 3 coarse sand) including normal range ofsize 300mm x 300mm and avove |
| 105 | Providing polished ceramic wall tiles of approved quality size and shape and thickness not less than 8mm on walls, skirting over cement mortar bed 10mm thick in prop. 1:3 (1 cement : 3 coarse sand) including cutting where (b) Executive range (ii) of size 200mm x 300mm and above |
| 106 | 15mm thick cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth. (a) on rough side (b) In cement mortar in proposition 1:4 |
| 107 | Providing precast R.C.C. slab over drain, septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm center both ways tying with 20 gauge balck annealed wire with necessary shuttering, curing etc. (b) 75mm thick slab |
| 108 | Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete |
| 109 | Providing undressed wood work in roof truss, rafter, purlin, tie and the like including hosting and fixing in position with necessary spikes, nails including M.S. strapes with bolts and nuts etc. complete with kiricide oilling two coats to all timber members and two coats of anticorrosive paint to M.S. straps (b) With Hollock/Sundi/Sam |
| 110 | Providing corrugated galvanised Iron sheet roofing of TATA SHAKTEE / SAIL including fitting and fixing necessary galvanized J or L hooks, bolts and nuts 8mm dia with bitumen washer 25mm dia x 3mm thick and 1.6mm thick limpet washer complete excluding cost of roof truss,purlin etc. (a) 0.63mm thick |
| 111 | Applying priming coat over new wood and wood based surface over 100mm in girth/width after and including preparing the surface by throughly cleaning oil,grease, dirt and other foreigh matter, sand papering and knotting. (a) With ready mixed paint, wood primer(Pink) |
| 112 | Painting two coats (excluding priming coat) on new wood and wood base surface with enamel paint of approved brand and manufacturer (Asian Paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreigh matter sand papering...(i) Surface over 100mm in width or girth (a) General purpose |
| 113 | Distempering with dry distemper of approved brand and manufacturer (two coats) and of required shadeon new wall surface to give an even shade, over and including proming coat of white primer after throughly brushing the surface free from mortar dropings and other foreign matter including. |
| 114 | Providing fitting and fixing recesssed soap tray /soap dish complete as directed and specified. |
| 115 | Providing fitting and fixing vitreous water closet squatting pan (indian type W.C. Orissa pattern ) with all fittings and fixturescomplete including cutting and making goood to the walls and floors whreever required(Flushing Cistern to be paid separately) |
| 116 | Providing fitting and fixing CP towel rail complete as directed and specified |
| 117 | Providing fitting and fixing mirror with plastic frame of size 500x400mm complete as directed and specified |
| 118 | Add Contingency (over all) |
| 119 | Add GST 7 % |
AI Tender Summary
Tender Timeline
Feb 02, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 17, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 19, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender