construction and repair of road Rj-11-Np-07 Nagarpalika Bidasar Rj-11-Np-07 Nagarpalika Bidasar
Tender Value
2.11 Crore
Estimated cost
Bid Submission
11 Feb 2022
0 days left
EMD
4.22 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ratangarh → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
construction and repair of road Rj-11-Np-07 Nagarpalika Bidasar Rj-11-Np-07 Nagarpalika Bidasar
BOQ
| Sl. No. | Item Description |
| 1 | lhlh lM+d fjis;j dk;Z vkn\"kZ fo|k efUnj fo|ky; ls f\"ko efUnj rd okMZ ua- 01] 02 chnklj |
| 2 | Providingconcreteforplain/reinforcedconcreteinopenfoundationscompleteasperdrawingsand MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C grade M 10 Nominal mix 1:3:6 |
| 3 | Constructionof un-reinforced,doweljointedatexpansionandconstructionjointonly,plaincement concretepavement,thicknessasperdesign,overapreparedsubbase,with43gradecementorany othertypeasperClause602.2.2M30(Grade),coarseandfineaggregatesconformingtoIS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cumcapacityandappropriateweighbatcherusingapprovedmixdesign, laidinapprovedfixedside formwork(steelchannel,layingandfixingof125micronthickpolythenefilm,wedges,steelplates including levelling the formworkasper drawing),spreading the concrete with shovels,rakes, compacted usingneedle,screedandplatevibratorsandfinishedincontinuousoperationincludingprovisionof contractionandexpansion,constructionjoints,applyingdebondingstrips,primer,sealant,dowelbars, nearapproachestobridge/culvertandconstructionjoints,admixturesasapproved,curingofconcrete slabs for 14-days, using curing compound and water finishing to lines and grade as per drawingand MoRTH Specification Clause 602 including vaccum dewatering process with all required equipments |
| 4 | Providing and Erecting typical Citizen\"s information Board as per approved drawing & specification made oftwoMSsheetof1.6mmthickeachofsize900mmx750mmstiffendbyangleiron25mmx25mmx 3mm all around the plate & plates fixed on frame of 75mm dia pipe of 12 SWG sheet (vertical post 3050 mm with angle holdfasts and horizontal member 900mm) to be joined by embedded in cement concrete M- 15 grade of block of 600mmx 600mm x 750 mm size below ground level as per enclosed drawings& as directed by Engineering incharge. All MS will be stove anmeled on both side lettering. Figuring and border willbewithreadymixedsynthethicenamelpaintofsuperiorqualityinrequiredshadeandcolouretc complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per Specification. |
| 5 | ProvidingandfixingMukhyaMantriSadakYojana/MahatmaGandhiRajyaSadakYojanainformatory signboardwithlogoforroadsfundedbyStateroadfundhavingM.S.Definitionplateof1.60mm thickness frame to steel hollow dsection of 75mm x 75mm, 2.5m long stove enamelled paint with hold fast includingpaintlogoasperapproveddesignandcolours.Thelogoshallbemadeoutof1.6mmthick circular plate duly framed with MS angle 25x25x5 mm on back and fix on 1200mm x 150mm rectangular steel base plate 1.6mm thick, the base of circular shall be plain at the junction of base plate. The size of definition plate shall be 1500x600mm and embedding the posts by M-15 cement concrete block45 cm x 45cmx60cm,60cmbelowgroundlevel includinglettering/writingandpaintingetc.completeinall respect.as per MoRTH Specification Clause 801. |
| 6 | lhlh ¼,e 30½ lM+d fjis;j dk;Z cSad vkWQ cM+kSnk pkSjkgk ls eq[; cktkj gksrs gq;s LVsV gkbZos 20 rd chnklj |
| 7 | Providingconcreteforplain/reinforcedconcreteinopenfoundationscompleteasperdrawingsand MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C grade M 10 Nominal mix 1:3:6 |
| 8 | Constructionof un-reinforced,doweljointedatexpansionandconstructionjointonly,plaincement concretepavement,thicknessasperdesign,overapreparedsubbase,with43gradecementorany othertypeasperClause602.2.2M30(Grade),coarseandfineaggregatesconformingtoIS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cumcapacityandappropriateweighbatcherusingapprovedmixdesign, laidinapprovedfixedside formwork(steelchannel,layingandfixingof125micronthickpolythenefilm,wedges,steelplates including levelling the formworkasper drawing),spreading the concrete with shovels,rakes, compacted usingneedle,screedandplatevibratorsandfinishedincontinuousoperationincludingprovisionof contractionandexpansion,constructionjoints,applyingdebondingstrips,primer,sealant,dowelbars, nearapproachestobridge/culvertandconstructionjoints,admixturesasapproved,curingofconcrete slabs for 14-days, using curing compound and water finishing to lines and grade as per drawingand MoRTH Specification Clause 602 including vaccum dewatering process with all required equipments |
| 9 | Providing and Erecting typical Citizen\"s information Board as per approved drawing & specification made oftwoMSsheetof1.6mmthickeachofsize900mmx750mmstiffendbyangleiron25mmx25mmx 3mm all around the plate & plates fixed on frame of 75mm dia pipe of 12 SWG sheet (vertical post 3050 mm with angle holdfasts and horizontal member 900mm) to be joined by embedded in cement concrete M- 15 grade of block of 600mmx 600mm x 750 mm size below ground level as per enclosed drawings& as directed by Engineering incharge. All MS will be stove anmeled on both side lettering. Figuring and border willbewithreadymixedsynthethicenamelpaintofsuperiorqualityinrequiredshadeandcolouretc complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per Specification. |
| 10 | ProvidingandfixingMukhyaMantriSadakYojana/MahatmaGandhiRajyaSadakYojanainformatory signboardwithlogoforroadsfundedbyStateroadfundhavingM.S.Definitionplateof1.60mm thickness frame to steel hollow dsection of 75mm x 75mm, 2.5m long stove enamelled paint with hold fast includingpaintlogoasperapproveddesignandcolours.Thelogoshallbemadeoutof1.6mmthick circular plate duly framed with MS angle 25x25x5 mm on back and fix on 1200mm x 150mm rectangular steel base plate 1.6mm thick, the base of circular shall be plain at the junction of base plate. The size of definition plate shall be 1500x600mm and embedding the posts by M-15 cement concrete block45 cm x 45cmx60cm,60cmbelowgroundlevel includinglettering/writingandpaintingetc.completeinall respect.as per MoRTH Specification Clause 801. |
| 11 | chVh lM+d fjis;j dk;Z nMhck \"e\"kku ls lhrkjke yksfg;k ¼nM+hck ikdZ½ rd okMZ ua- 26]27 chnklj |
| 12 | Providing,laying,spreadingandcompactingstoneaggregatesofspecificsizestowaterbound macadamspecificationincludingspreadinginuniformthickness,handpacking,rollingwiththree wheel80-100kNstaticrollerinstagestopropergradeandcamber,applyingandbrooming, crushablescreeningtofill-uptheintersticesofcoarseaggregate,wateringandcompactingtothe required density Grading 2as perMoRTH SpecificationClause 404. Using CrusherBroken aggregate By Manual Means |
| 13 | Providingandapplyingprimercoatwithbitumenemulsion(SS-1)onpreparedsurfaceofgranular base(WBM/WMM)includingcleaningofroadsurfaceandsprayingprimerattherateof0.70-1.0 kg/sqm using mechanical means as per MoRTH Specification Clause 502 |
| 14 | ProvidingandapplyingtackcoatwithBitumenemulsion(RS-1) usingemulsion distributoratthe rateof0.25to0.30kgpersqmonthepreparedgranularsurfacestreatedwithprimer&cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 15 | Providing, laying and rolling of open-graded premix carpet of20 mmthickness composed of 13.2 mm to5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serveaswearingcourseonapreviouslypreparedbase,includingmixinginasuitableplant,layingand rollingwithathreewheel80-100kNstaticrollercapacity,finishedtorequiredlevelandgradestobe followed by seal coat of either Type A or Type B or Type C as per MoRTH Specification Clause 510. ByManual Means Bitumen (VG-30) |
| 16 | ProvidingandapplyingtackcoatwithBitumenemulsion(RS-1) usingemulsiondistributoratthe rate of0.20 to 0.30 kg per sqmon the prepared bituminoussurface cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 17 | Providing and laying bituminous macadam with hot mix plant using crushed aggregates ofgrading as per Table500-7premixedwithbituminousbinder,transportedtositewithallleadslaidoverapreviously prepared surface with paver finisher to the required grade, level and alignment and rolledto achieve the desired compaction as per MoRTH Specification Clause 504. Bitumen (VG-30) |
| 18 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRTH Specification Clause 510. Case - II By Mechanical Means. Bitumen (VG-30) |
| 19 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per MoRTH Specification Clause 511 By Mechanical Means Type BBitumen (VG-30) |
| 20 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller to achieve thedesired density, complete as per MoRTH Specification Clause 401.For Grading IIIMaterial |
| 21 | Providing and Erecting typical Citizen\"s information Board as per approved drawing & specification made oftwoMSsheetof1.6mmthickeachofsize900mmx750mmstiffendbyangleiron25mmx25mmx 3mm all around the plate & plates fixed on frame of 75mm dia pipe of 12 SWG sheet (vertical post 3050 mm with angle holdfasts and horizontal member 900mm) to be joined by embedded in cement concrete M- 15 grade of block of 600mmx 600mm x 750 mm size below ground level as per enclosed drawings& as directed by Engineering incharge. All MS will be stove anmeled on both side lettering. Figuring and border willbewithreadymixedsynthethicenamelpaintofsuperiorqualityinrequiredshadeandcolouretc complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per Specification. |
| 22 | ProvidingandfixingMukhyaMantriSadakYojana/MahatmaGandhiRajyaSadakYojanainformatory signboardwithlogoforroadsfundedbyStateroadfundhavingM.S.Definitionplateof1.60mm thickness frame to steel hollow dsection of 75mm x 75mm, 2.5m long stove enamelled paint with hold fast includingpaintlogoasperapproveddesignandcolours.Thelogoshallbemadeoutof1.6mmthick circular plate duly framed with MS angle 25x25x5 mm on back and fix on 1200mm x 150mm rectangular steel base plate 1.6mm thick, the base of circular shall be plain at the junction of base plate. The size of definition plate shall be 1500x600mm and embedding the posts by M-15 cement concrete block45 cm x 45cmx60cm,60cmbelowgroundlevel includinglettering/writingandpaintingetc.completeinall respect.as per MoRTH Specification Clause 801. |
| 23 | chVh lM+d fjis;j dk;Z ukuw dyky ds ?kj ls ghj th yqgkj ds ?kj rd okMZ ua- 18 chnklj |
| 24 | Providing,laying,spreadingandcompactingstoneaggregatesofspecificsizestowaterbound macadamspecificationincludingspreadinginuniformthickness,handpacking,rollingwiththree wheel80-100kNstaticrollerinstagestopropergradeandcamber,applyingandbrooming, crushablescreeningtofill-uptheintersticesofcoarseaggregate,wateringandcompactingtothe required density Grading 2as perMoRTH SpecificationClause 404. Using CrusherBroken aggregate By Manual Means |
| 25 | Providingandapplyingprimercoatwithbitumenemulsion(SS-1)onpreparedsurfaceofgranular base(WBM/WMM)includingcleaningofroadsurfaceandsprayingprimerattherateof0.70-1.0 kg/sqm using mechanical means as per MoRTH Specification Clause 502 |
| 26 | ProvidingandapplyingtackcoatwithBitumenemulsion(RS-1) usingemulsion distributoratthe rateof0.25to0.30kgpersqmonthepreparedgranularsurfacestreatedwithprimer&cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 27 | Providing, laying and rolling of open-graded premix carpet of20 mmthickness composed of 13.2 mm to5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serveaswearingcourseonapreviouslypreparedbase,includingmixinginasuitableplant,layingand rollingwithathreewheel80-100kNstaticrollercapacity,finishedtorequiredlevelandgradestobe followed by seal coat of either Type A or Type B or Type C as per MoRTH Specification Clause 510. ByManual Means Bitumen (VG-30) |
| 28 | ProvidingandapplyingtackcoatwithBitumenemulsion(RS-1) usingemulsiondistributoratthe rate of0.20 to 0.30 kg per sqmon the prepared bituminoussurface cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 29 | Providing and laying bituminous macadam with hot mix plant using crushed aggregates ofgrading as per Table500-7premixedwithbituminousbinder,transportedtositewithallleadslaidoverapreviously prepared surface with paver finisher to the required grade, level and alignment and rolledto achieve the desired compaction as per MoRTH Specification Clause 504. Bitumen (VG-30) |
| 30 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRTH Specification Clause 510. Case - II By Mechanical Means. Bitumen (VG-30) |
| 31 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per MoRTH Specification Clause 511 By Mechanical Means Type BBitumen (VG-30) |
| 32 | Providing and Erecting typical Citizen\"s information Board as per approved drawing & specification made oftwoMSsheetof1.6mmthickeachofsize900mmx750mmstiffendbyangleiron25mmx25mmx 3mm all around the plate & plates fixed on frame of 75mm dia pipe of 12 SWG sheet (vertical post 3050 mm with angle holdfasts and horizontal member 900mm) to be joined by embedded in cement concrete M- 15 grade of block of 600mmx 600mm x 750 mm size below ground level as per enclosed drawings& as directed by Engineering incharge. All MS will be stove anmeled on both side lettering. Figuring and border willbewithreadymixedsynthethicenamelpaintofsuperiorqualityinrequiredshadeandcolouretc complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per Specification. |
| 33 | ProvidingandfixingMukhyaMantriSadakYojana/MahatmaGandhiRajyaSadakYojanainformatory signboardwithlogoforroadsfundedbyStateroadfundhavingM.S.Definitionplateof1.60mm thickness frame to steel hollow dsection of 75mm x 75mm, 2.5m long stove enamelled paint with hold fast includingpaintlogoasperapproveddesignandcolours.Thelogoshallbemadeoutof1.6mmthick circular plate duly framed with MS angle 25x25x5 mm on back and fix on 1200mm x 150mm rectangular steel base plate 1.6mm thick, the base of circular shall be plain at the junction of base plate. The size of definition plate shall be 1500x600mm and embedding the posts by M-15 cement concrete block45 cm x 45cmx60cm,60cmbelowgroundlevel includinglettering/writingandpaintingetc.completeinall respect.as per MoRTH Specification Clause 801. |
| 34 | chVh lM+d fjis;j dk;Z eqUukjke ds ?kj ls ykypUn es?koky ds ?kj rd okMZ ua- 35 chnklj |
| 35 | Providing,laying,spreadingandcompactingstoneaggregatesofspecificsizestowaterbound macadamspecificationincludingspreadinginuniformthickness,handpacking,rollingwiththree wheel80-100kNstaticrollerinstagestopropergradeandcamber,applyingandbrooming, crushablescreeningtofill-uptheintersticesofcoarseaggregate,wateringandcompactingtothe required density Grading 2as perMoRTH SpecificationClause 404. Using CrusherBroken aggregate By Manual Means |
| 36 | Providingandapplyingprimercoatwithbitumenemulsion(SS-1)onpreparedsurfaceofgranular base(WBM/WMM)includingcleaningofroadsurfaceandsprayingprimerattherateof0.70-1.0 kg/sqm using mechanical means as per MoRTH Specification Clause 502 |
| 37 | ProvidingandapplyingtackcoatwithBitumenemulsion(RS-1) usingemulsion distributoratthe rateof0.25to0.30kgpersqmonthepreparedgranularsurfacestreatedwithprimer&cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 38 | Providing, laying and rolling of open-graded premix carpet of20 mmthickness composed of 13.2 mm to5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serveaswearingcourseonapreviouslypreparedbase,includingmixinginasuitableplant,layingand rollingwithathreewheel80-100kNstaticrollercapacity,finishedtorequiredlevelandgradestobe followed by seal coat of either Type A or Type B or Type C as per MoRTH Specification Clause 510. ByManual Means Bitumen (VG-30) |
| 39 | ProvidingandapplyingtackcoatwithBitumenemulsion(RS-1) usingemulsiondistributoratthe rate of0.20 to 0.30 kg per sqmon the prepared bituminoussurface cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 40 | Providing and laying bituminous macadam with hot mix plant using crushed aggregates ofgrading as per Table500-7premixedwithbituminousbinder,transportedtositewithallleadslaidoverapreviously prepared surface with paver finisher to the required grade, level and alignment and rolledto achieve the desired compaction as per MoRTH Specification Clause 504. Bitumen (VG-30) |
| 41 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRTH Specification Clause 510. Case - II By Mechanical Means. Bitumen (VG-30) |
| 42 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per MoRTH Specification Clause 511 By Mechanical Means Type BBitumen (VG-30) |
| 43 | Providing and Erecting typical Citizen\"s information Board as per approved drawing & specification made oftwoMSsheetof1.6mmthickeachofsize900mmx750mmstiffendbyangleiron25mmx25mmx 3mm all around the plate & plates fixed on frame of 75mm dia pipe of 12 SWG sheet (vertical post 3050 mm with angle holdfasts and horizontal member 900mm) to be joined by embedded in cement concrete M- 15 grade of block of 600mmx 600mm x 750 mm size below ground level as per enclosed drawings& as directed by Engineering incharge. All MS will be stove anmeled on both side lettering. Figuring and border willbewithreadymixedsynthethicenamelpaintofsuperiorqualityinrequiredshadeandcolouretc complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per Specification. |
| 44 | ProvidingandfixingMukhyaMantriSadakYojana/MahatmaGandhiRajyaSadakYojanainformatory signboardwithlogoforroadsfundedbyStateroadfundhavingM.S.Definitionplateof1.60mm thickness frame to steel hollow dsection of 75mm x 75mm, 2.5m long stove enamelled paint with hold fast includingpaintlogoasperapproveddesignandcolours.Thelogoshallbemadeoutof1.6mmthick circular plate duly framed with MS angle 25x25x5 mm on back and fix on 1200mm x 150mm rectangular steel base plate 1.6mm thick, the base of circular shall be plain at the junction of base plate. The size of definition plate shall be 1500x600mm and embedding the posts by M-15 cement concrete block45 cm x 45cmx60cm,60cmbelowgroundlevel includinglettering/writingandpaintingetc.completeinall respect.as per MoRTH Specification Clause 801. |
| 45 | chVh lM+d fjis;j dk;Z lksgujke ds ?kj ls eukst dqekj ds ?kj rd okMZ ua- 35 chnklj |
| 46 | Providing,laying,spreadingandcompactingstoneaggregatesofspecificsizestowaterbound macadamspecificationincludingspreadinginuniformthickness,handpacking,rollingwiththree wheel80-100kNstaticrollerinstagestopropergradeandcamber,applyingandbrooming, crushablescreeningtofill-uptheintersticesofcoarseaggregate,wateringandcompactingtothe required density Grading 2as perMoRTH SpecificationClause 404. Using CrusherBroken aggregate By Manual Means |
| 47 | Providingandapplyingprimercoatwithbitumenemulsion(SS-1)onpreparedsurfaceofgranular base(WBM/WMM)includingcleaningofroadsurfaceandsprayingprimerattherateof0.70-1.0 kg/sqm using mechanical means as per MoRTH Specification Clause 502 |
| 48 | ProvidingandapplyingtackcoatwithBitumenemulsion(RS-1) usingemulsion distributoratthe rateof0.25to0.30kgpersqmonthepreparedgranularsurfacestreatedwithprimer&cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 49 | Providing, laying and rolling of open-graded premix carpet of20 mmthickness composed of 13.2 mm to5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serveaswearingcourseonapreviouslypreparedbase,includingmixinginasuitableplant,layingand rollingwithathreewheel80-100kNstaticrollercapacity,finishedtorequiredlevelandgradestobe followed by seal coat of either Type A or Type B or Type C as per MoRTH Specification Clause 510. ByManual Means Bitumen (VG-30) |
| 50 | ProvidingandapplyingtackcoatwithBitumenemulsion(RS-1) usingemulsiondistributoratthe rate of0.20 to 0.30 kg per sqmon the prepared bituminoussurface cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 51 | Providing and laying bituminous macadam with hot mix plant using crushed aggregates ofgrading as per Table500-7premixedwithbituminousbinder,transportedtositewithallleadslaidoverapreviously prepared surface with paver finisher to the required grade, level and alignment and rolledto achieve the desired compaction as per MoRTH Specification Clause 504. Bitumen (VG-30) |
| 52 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRTH Specification Clause 510. Case - II By Mechanical Means. Bitumen (VG-30) |
| 53 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per MoRTH Specification Clause 511 By Mechanical Means Type BBitumen (VG-30) |
| 54 | Providing and Erecting typical Citizen\"s information Board as per approved drawing & specification made oftwoMSsheetof1.6mmthickeachofsize900mmx750mmstiffendbyangleiron25mmx25mmx 3mm all around the plate & plates fixed on frame of 75mm dia pipe of 12 SWG sheet (vertical post 3050 mm with angle holdfasts and horizontal member 900mm) to be joined by embedded in cement concrete M- 15 grade of block of 600mmx 600mm x 750 mm size below ground level as per enclosed drawings& as directed by Engineering incharge. All MS will be stove anmeled on both side lettering. Figuring and border willbewithreadymixedsynthethicenamelpaintofsuperiorqualityinrequiredshadeandcolouretc complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per Specification. |
| 55 | ProvidingandfixingMukhyaMantriSadakYojana/MahatmaGandhiRajyaSadakYojanainformatory signboardwithlogoforroadsfundedbyStateroadfundhavingM.S.Definitionplateof1.60mm thickness frame to steel hollow dsection of 75mm x 75mm, 2.5m long stove enamelled paint with hold fast includingpaintlogoasperapproveddesignandcolours.Thelogoshallbemadeoutof1.6mmthick circular plate duly framed with MS angle 25x25x5 mm on back and fix on 1200mm x 150mm rectangular steel base plate 1.6mm thick, the base of circular shall be plain at the junction of base plate. The size of definition plate shall be 1500x600mm and embedding the posts by M-15 cement concrete block45 cm x 45cmx60cm,60cmbelowgroundlevel includinglettering/writingandpaintingetc.completeinall respect.as per MoRTH Specification Clause 801. |
| 56 | chVh lM+d fjis;j dk;Z f\"koth Lokeh ds ?kj ls Jh Mwaxjx<+ jksM+ dh vksj okMZ ua- 04 chnklj |
| 57 | Providing,laying,spreadingandcompactingstoneaggregatesofspecificsizestowaterbound macadamspecificationincludingspreadinginuniformthickness,handpacking,rollingwiththree wheel80-100kNstaticrollerinstagestopropergradeandcamber,applyingandbrooming, crushablescreeningtofill-uptheintersticesofcoarseaggregate,wateringandcompactingtothe required density Grading 2as perMoRTH SpecificationClause 404. Using CrusherBroken aggregate By Manual Means |
| 58 | Providingandapplyingprimercoatwithbitumenemulsion(SS-1)onpreparedsurfaceofgranular base(WBM/WMM)includingcleaningofroadsurfaceandsprayingprimerattherateof0.70-1.0 kg/sqm using mechanical means as per MoRTH Specification Clause 502 |
| 59 | ProvidingandapplyingtackcoatwithBitumenemulsion(RS-1) usingemulsion distributoratthe rateof0.25to0.30kgpersqmonthepreparedgranularsurfacestreatedwithprimer&cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 60 | Providing, laying and rolling of open-graded premix carpet of20 mmthickness composed of 13.2 mm to5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serveaswearingcourseonapreviouslypreparedbase,includingmixinginasuitableplant,layingand rollingwithathreewheel80-100kNstaticrollercapacity,finishedtorequiredlevelandgradestobe followed by seal coat of either Type A or Type B or Type C as per MoRTH Specification Clause 510. ByManual Means Bitumen (VG-30) |
| 61 | ProvidingandapplyingtackcoatwithBitumenemulsion(RS-1) usingemulsiondistributoratthe rate of0.20 to 0.30 kg per sqmon the prepared bituminoussurface cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 62 | Providing and laying bituminous macadam with hot mix plant using crushed aggregates ofgrading as per Table500-7premixedwithbituminousbinder,transportedtositewithallleadslaidoverapreviously prepared surface with paver finisher to the required grade, level and alignment and rolledto achieve the desired compaction as per MoRTH Specification Clause 504. Bitumen (VG-30) |
| 63 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRTH Specification Clause 510. Case - II By Mechanical Means. Bitumen (VG-30) |
| 64 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per MoRTH Specification Clause 511 By Mechanical Means Type BBitumen (VG-30) |
| 65 | Providing and Erecting typical Citizen\"s information Board as per approved drawing & specification made oftwoMSsheetof1.6mmthickeachofsize900mmx750mmstiffendbyangleiron25mmx25mmx 3mm all around the plate & plates fixed on frame of 75mm dia pipe of 12 SWG sheet (vertical post 3050 mm with angle holdfasts and horizontal member 900mm) to be joined by embedded in cement concrete M- 15 grade of block of 600mmx 600mm x 750 mm size below ground level as per enclosed drawings& as directed by Engineering incharge. All MS will be stove anmeled on both side lettering. Figuring and border willbewithreadymixedsynthethicenamelpaintofsuperiorqualityinrequiredshadeandcolouretc complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per Specification. |
| 66 | ProvidingandfixingMukhyaMantriSadakYojana/MahatmaGandhiRajyaSadakYojanainformatory signboardwithlogoforroadsfundedbyStateroadfundhavingM.S.Definitionplateof1.60mm thickness frame to steel hollow dsection of 75mm x 75mm, 2.5m long stove enamelled paint with hold fast includingpaintlogoasperapproveddesignandcolours.Thelogoshallbemadeoutof1.6mmthick circular plate duly framed with MS angle 25x25x5 mm on back and fix on 1200mm x 150mm rectangular steel base plate 1.6mm thick, the base of circular shall be plain at the junction of base plate. The size of definition plate shall be 1500x600mm and embedding the posts by M-15 cement concrete block45 cm x 45cmx60cm,60cmbelowgroundlevel includinglettering/writingandpaintingetc.completeinall respect.as per MoRTH Specification Clause 801. |
| 67 | chVh lM+d fjis;j dk;Z jkorkjke jsxj ds uksgjs ls iznhi okYehdh ok;k jktdh; fo|ky; ua- 02 okMZ ua- 32 chnklj |
| 68 | Providing,laying,spreadingandcompactingstoneaggregatesofspecificsizestowaterbound macadamspecificationincludingspreadinginuniformthickness,handpacking,rollingwiththree wheel80-100kNstaticrollerinstagestopropergradeandcamber,applyingandbrooming, crushablescreeningtofill-uptheintersticesofcoarseaggregate,wateringandcompactingtothe required density Grading 2as perMoRTH SpecificationClause 404. Using CrusherBroken aggregate By Manual Means |
| 69 | Providingandapplyingprimercoatwithbitumenemulsion(SS-1)onpreparedsurfaceofgranular base(WBM/WMM)includingcleaningofroadsurfaceandsprayingprimerattherateof0.70-1.0 kg/sqm using mechanical means as per MoRTH Specification Clause 502 |
| 70 | ProvidingandapplyingtackcoatwithBitumenemulsion(RS-1) usingemulsion distributoratthe rateof0.25to0.30kgpersqmonthepreparedgranularsurfacestreatedwithprimer&cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 71 | Providing, laying and rolling of open-graded premix carpet of20 mmthickness composed of 13.2 mm to5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serveaswearingcourseonapreviouslypreparedbase,includingmixinginasuitableplant,layingand rollingwithathreewheel80-100kNstaticrollercapacity,finishedtorequiredlevelandgradestobe followed by seal coat of either Type A or Type B or Type C as per MoRTH Specification Clause 510. ByManual Means Bitumen (VG-30) |
| 72 | ProvidingandapplyingtackcoatwithBitumenemulsion(RS-1) usingemulsiondistributoratthe rate of0.20 to 0.30 kg per sqmon the prepared bituminoussurface cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 73 | Providing and laying bituminous macadam with hot mix plant using crushed aggregates ofgrading as per Table500-7premixedwithbituminousbinder,transportedtositewithallleadslaidoverapreviously prepared surface with paver finisher to the required grade, level and alignment and rolledto achieve the desired compaction as per MoRTH Specification Clause 504. Bitumen (VG-30) |
| 74 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRTH Specification Clause 510. Case - II By Mechanical Means. Bitumen (VG-30) |
| 75 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per MoRTH Specification Clause 511 By Mechanical Means Type BBitumen (VG-30) |
| 76 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller to achieve thedesired density, complete as per MoRTH Specification Clause 401.For Grading IIIMaterial |
| 77 | Providing and Erecting typical Citizen\"s information Board as per approved drawing & specification made oftwoMSsheetof1.6mmthickeachofsize900mmx750mmstiffendbyangleiron25mmx25mmx 3mm all around the plate & plates fixed on frame of 75mm dia pipe of 12 SWG sheet (vertical post 3050 mm with angle holdfasts and horizontal member 900mm) to be joined by embedded in cement concrete M- 15 grade of block of 600mmx 600mm x 750 mm size below ground level as per enclosed drawings& as directed by Engineering incharge. All MS will be stove anmeled on both side lettering. Figuring and border willbewithreadymixedsynthethicenamelpaintofsuperiorqualityinrequiredshadeandcolouretc complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per Specification. |
| 78 | ProvidingandfixingMukhyaMantriSadakYojana/MahatmaGandhiRajyaSadakYojanainformatory signboardwithlogoforroadsfundedbyStateroadfundhavingM.S.Definitionplateof1.60mm thickness frame to steel hollow dsection of 75mm x 75mm, 2.5m long stove enamelled paint with hold fast includingpaintlogoasperapproveddesignandcolours.Thelogoshallbemadeoutof1.6mmthick circular plate duly framed with MS angle 25x25x5 mm on back and fix on 1200mm x 150mm rectangular steel base plate 1.6mm thick, the base of circular shall be plain at the junction of base plate. The size of definition plate shall be 1500x600mm and embedding the posts by M-15 cement concrete block45 cm x 45cmx60cm,60cmbelowgroundlevel includinglettering/writingandpaintingetc.completeinall respect.as per MoRTH Specification Clause 801. |
| 79 | chVh lM+d fjis;j dk;Z lq[kkjke es?koky ls f\"ko pkSd dh vksj ok;k lUrks\"k es?koky okMZ ua- 33 chnklj |
| 80 | Providing,laying,spreadingandcompactingstoneaggregatesofspecificsizestowaterbound macadamspecificationincludingspreadinginuniformthickness,handpacking,rollingwiththree wheel80-100kNstaticrollerinstagestopropergradeandcamber,applyingandbrooming, crushablescreeningtofill-uptheintersticesofcoarseaggregate,wateringandcompactingtothe required density Grading 2as perMoRTH SpecificationClause 404. Using CrusherBroken aggregate By Manual Means |
| 81 | Providingandapplyingprimercoatwithbitumenemulsion(SS-1)onpreparedsurfaceofgranular base(WBM/WMM)includingcleaningofroadsurfaceandsprayingprimerattherateof0.70-1.0 kg/sqm using mechanical means as per MoRTH Specification Clause 502 |
| 82 | ProvidingandapplyingtackcoatwithBitumenemulsion(RS-1) usingemulsion distributoratthe rateof0.25to0.30kgpersqmonthepreparedgranularsurfacestreatedwithprimer&cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 83 | Providing, laying and rolling of open-graded premix carpet of20 mmthickness composed of 13.2 mm to5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serveaswearingcourseonapreviouslypreparedbase,includingmixinginasuitableplant,layingand rollingwithathreewheel80-100kNstaticrollercapacity,finishedtorequiredlevelandgradestobe followed by seal coat of either Type A or Type B or Type C as per MoRTH Specification Clause 510. ByManual Means Bitumen (VG-30) |
| 84 | ProvidingandapplyingtackcoatwithBitumenemulsion(RS-1) usingemulsiondistributoratthe rate of0.20 to 0.30 kg per sqmon the prepared bituminoussurface cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 85 | Providing and laying bituminous macadam with hot mix plant using crushed aggregates ofgrading as per Table500-7premixedwithbituminousbinder,transportedtositewithallleadslaidoverapreviously prepared surface with paver finisher to the required grade, level and alignment and rolledto achieve the desired compaction as per MoRTH Specification Clause 504. Bitumen (VG-30) |
| 86 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRTH Specification Clause 510. Case - II By Mechanical Means. Bitumen (VG-30) |
| 87 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per MoRTH Specification Clause 511 By Mechanical Means Type BBitumen (VG-30) |
| 88 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller to achieve thedesired density, complete as per MoRTH Specification Clause 401.For Grading IIIMaterial |
| 89 | Providing and Erecting typical Citizen\"s information Board as per approved drawing & specification made oftwoMSsheetof1.6mmthickeachofsize900mmx750mmstiffendbyangleiron25mmx25mmx 3mm all around the plate & plates fixed on frame of 75mm dia pipe of 12 SWG sheet (vertical post 3050 mm with angle holdfasts and horizontal member 900mm) to be joined by embedded in cement concrete M- 15 grade of block of 600mmx 600mm x 750 mm size below ground level as per enclosed drawings& as directed by Engineering incharge. All MS will be stove anmeled on both side lettering. Figuring and border willbewithreadymixedsynthethicenamelpaintofsuperiorqualityinrequiredshadeandcolouretc complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per Specification. |
| 90 | ProvidingandfixingMukhyaMantriSadakYojana/MahatmaGandhiRajyaSadakYojanainformatory signboardwithlogoforroadsfundedbyStateroadfundhavingM.S.Definitionplateof1.60mm thickness frame to steel hollow dsection of 75mm x 75mm, 2.5m long stove enamelled paint with hold fast includingpaintlogoasperapproveddesignandcolours.Thelogoshallbemadeoutof1.6mmthick circular plate duly framed with MS angle 25x25x5 mm on back and fix on 1200mm x 150mm rectangular steel base plate 1.6mm thick, the base of circular shall be plain at the junction of base plate. The size of definition plate shall be 1500x600mm and embedding the posts by M-15 cement concrete block45 cm x 45cmx60cm,60cmbelowgroundlevel includinglettering/writingandpaintingetc.completeinall respect.as per MoRTH Specification Clause 801. |
| 91 | lhlh ¼,e 30½ lM+d fjis;j dk;Z okVj oDlZ pkSjkgs ls ;kdwc ef.kgkjh dh nqdku dh vksj okMZ ua- 14]35 chnklj |
| 92 | Providingconcreteforplain/reinforcedconcreteinopenfoundationscompleteasperdrawingsand MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C grade M 10 Nominal mix 1:3:6 |
| 93 | Constructionof un-reinforced,doweljointedatexpansionandconstructionjointonly,plaincement concretepavement,thicknessasperdesign,overapreparedsubbase,with43gradecementorany othertypeasperClause602.2.2M30(Grade),coarseandfineaggregatesconformingtoIS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cumcapacityandappropriateweighbatcherusingapprovedmixdesign, laidinapprovedfixedside formwork(steelchannel,layingandfixingof125micronthickpolythenefilm,wedges,steelplates including levelling the formworkasper drawing),spreading the concrete with shovels,rakes, compacted usingneedle,screedandplatevibratorsandfinishedincontinuousoperationincludingprovisionof contractionandexpansion,constructionjoints,applyingdebondingstrips,primer,sealant,dowelbars, nearapproachestobridge/culvertandconstructionjoints,admixturesasapproved,curingofconcrete slabs for 14-days, using curing compound and water finishing to lines and grade as per drawingand MoRTH Specification Clause 602 including vaccum dewatering process with all required equipments |
| 94 | Providing and Erecting typical Citizen\"s information Board as per approved drawing & specification made oftwoMSsheetof1.6mmthickeachofsize900mmx750mmstiffendbyangleiron25mmx25mmx 3mm all around the plate & plates fixed on frame of 75mm dia pipe of 12 SWG sheet (vertical post 3050 mm with angle holdfasts and horizontal member 900mm) to be joined by embedded in cement concrete M- 15 grade of block of 600mmx 600mm x 750 mm size below ground level as per enclosed drawings& as directed by Engineering incharge. All MS will be stove anmeled on both side lettering. Figuring and border willbewithreadymixedsynthethicenamelpaintofsuperiorqualityinrequiredshadeandcolouretc complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per Specification. |
| 95 | ProvidingandfixingMukhyaMantriSadakYojana/MahatmaGandhiRajyaSadakYojanainformatory signboardwithlogoforroadsfundedbyStateroadfundhavingM.S.Definitionplateof1.60mm thickness frame to steel hollow dsection of 75mm x 75mm, 2.5m long stove enamelled paint with hold fast includingpaintlogoasperapproveddesignandcolours.Thelogoshallbemadeoutof1.6mmthick circular plate duly framed with MS angle 25x25x5 mm on back and fix on 1200mm x 150mm rectangular steel base plate 1.6mm thick, the base of circular shall be plain at the junction of base plate. The size of definition plate shall be 1500x600mm and embedding the posts by M-15 cement concrete block45 cm x 45cmx60cm,60cmbelowgroundlevel includinglettering/writingandpaintingetc.completeinall respect.as per MoRTH Specification Clause 801. |
| 96 | chVh lM+d fjis;j dk;Z uks[kk & lhdj jksM+ eq[; lM+d ls xksiky th Nkiksyk ds uksgjs rd okMZ ua- 23 chnklj |
| 97 | Providing,laying,spreadingandcompactingstoneaggregatesofspecificsizestowaterbound macadamspecificationincludingspreadinginuniformthickness,handpacking,rollingwiththree wheel80-100kNstaticrollerinstagestopropergradeandcamber,applyingandbrooming, crushablescreeningtofill-uptheintersticesofcoarseaggregate,wateringandcompactingtothe required density Grading 2as perMoRTH SpecificationClause 404. Using CrusherBroken aggregate By Manual Means |
| 98 | Providingandapplyingprimercoatwithbitumenemulsion(SS-1)onpreparedsurfaceofgranular base(WBM/WMM)includingcleaningofroadsurfaceandsprayingprimerattherateof0.70-1.0 kg/sqm using mechanical means as per MoRTH Specification Clause 502 |
| 99 | ProvidingandapplyingtackcoatwithBitumenemulsion(RS-1) usingemulsion distributoratthe rateof0.25to0.30kgpersqmonthepreparedgranularsurfacestreatedwithprimer&cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 100 | Providing, laying and rolling of open-graded premix carpet of20 mmthickness composed of 13.2 mm to5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serveaswearingcourseonapreviouslypreparedbase,includingmixinginasuitableplant,layingand rollingwithathreewheel80-100kNstaticrollercapacity,finishedtorequiredlevelandgradestobe followed by seal coat of either Type A or Type B or Type C as per MoRTH Specification Clause 510. ByManual Means Bitumen (VG-30) |
| 101 | ProvidingandapplyingtackcoatwithBitumenemulsion(RS-1) usingemulsiondistributoratthe rate of0.20 to 0.30 kg per sqmon the prepared bituminoussurface cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 102 | Providing and laying bituminous macadam with hot mix plant using crushed aggregates ofgrading as per Table500-7premixedwithbituminousbinder,transportedtositewithallleadslaidoverapreviously prepared surface with paver finisher to the required grade, level and alignment and rolledto achieve the desired compaction as per MoRTH Specification Clause 504. Bitumen (VG-30) |
| 103 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRTH Specification Clause 510. Case - II By Mechanical Means. Bitumen (VG-30) |
| 104 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per MoRTH Specification Clause 511 By Mechanical Means Type BBitumen (VG-30) |
| 105 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller to achieve thedesired density, complete as per MoRTH Specification Clause 401.For Grading IIIMaterial |
| 106 | Providing and Erecting typical Citizen\"s information Board as per approved drawing & specification made oftwoMSsheetof1.6mmthickeachofsize900mmx750mmstiffendbyangleiron25mmx25mmx 3mm all around the plate & plates fixed on frame of 75mm dia pipe of 12 SWG sheet (vertical post 3050 mm with angle holdfasts and horizontal member 900mm) to be joined by embedded in cement concrete M- 15 grade of block of 600mmx 600mm x 750 mm size below ground level as per enclosed drawings& as directed by Engineering incharge. All MS will be stove anmeled on both side lettering. Figuring and border willbewithreadymixedsynthethicenamelpaintofsuperiorqualityinrequiredshadeandcolouretc complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per Specification. |
| 107 | ProvidingandfixingMukhyaMantriSadakYojana/MahatmaGandhiRajyaSadakYojanainformatory signboardwithlogoforroadsfundedbyStateroadfundhavingM.S.Definitionplateof1.60mm thickness frame to steel hollow dsection of 75mm x 75mm, 2.5m long stove enamelled paint with hold fast includingpaintlogoasperapproveddesignandcolours.Thelogoshallbemadeoutof1.6mmthick circular plate duly framed with MS angle 25x25x5 mm on back and fix on 1200mm x 150mm rectangular steel base plate 1.6mm thick, the base of circular shall be plain at the junction of base plate. The size of definition plate shall be 1500x600mm and embedding the posts by M-15 cement concrete block45 cm x 45cmx60cm,60cmbelowgroundlevel includinglettering/writingandpaintingetc.completeinall respect.as per MoRTH Specification Clause 801. |
AI Tender Summary
Tender Timeline
Feb 01, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 11, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 14, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender