|
| 1 | Supplying and installation of 9 Nos. seminar work surface table (8 Nos 2 seater having a size of 1350 into 600 into 740 mm and 1 No. 3 seater having a size of 1509 into 825 into 740 mm) Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Plastic ABS access flap is provided for easy access to wires and cables. Work top is available in various shapes shown above. Understructure-It consist of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. The product has a knock-down construction.Modesty Panel-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns. Wire Management-An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component is fitted to pull out audio,video cables onto worktop and connect devices charger to power socket below worktop (Godrej / Rock worth / Steel Case/ HNI make). |
| 2 | Supplying and installation ofHIGH BACK SIZE: 51.8 cm. (W) x 75.2 cm. (H).* SEAT SIZE: 49.0 cm. (W) x 48.8 cm. (D).2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density =45+/-2 kg/m3 and hardness 13 ± 1 kgf as per IS: 7888 for 25% compression. ARMRESTS: Fixed type Armrest is made of plastic injection moulded nylon with textured top. FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features.• 360° revolving type.• Single point control.• Front-pivot for tilt with feet resting-on ground ensuring more comfort.• Tilt tension adjustment.• 4-position locking with anti-shock feature.5. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 9.0 ±0.3 cm.6. PEDESTAL ASSEMBLY WITH CASTORS: The pedestal is fabricated from 0.2 ± 0.02 cm thick HR sheet ( IS : DD 1079 / HR skin pass ), chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. The pedestal is 66.0±0.5cm. Pitch-center dia. (76.0±1.0 cm with castors). SEAT-BACK CONNECTING SPINE (Visitor): The seat and back are arrested together with spine made of 0.8 ±0.05 cm thk HR Steel and is black powder-coated ( DFT 40-60 microns ).8. TWIN WHEEL CASTOR :The twin wheel castors are injection moulded in black (Godrej / Rock worth / Steel Case/ HNI make). |
| 3 | Supplying and installation of SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric. Back Size: 45.5 cm. (/1/) x 53.0 cm. (H) Seat Size: 48.5 cm. (W) x 47.0 cm. (D) . HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and backcushion is moulded in Density Min 48 kg/m3, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression. TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronizes with the back movement during posture changes. The \"S\"Nomenclature continued to 3.1 |
| 4 | shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent.FIXED ARMRESTS: The assembly should be having Fixed arm rest structure moulded in glass-filled Poly-amide. The Armrest Top should be made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide.PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm . PEDESTAL ASSEMBLY: The pedestal should be injection moulded in glass-filled Poly-amide and fitted with 5 nos. twin wheel castors. The pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors .TWIN WHEEL CASTORS :5 nos. twin wheel castos are injection moulded in Poly-amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal (Godrej / Rock worth / Steel Case/ HNI make). |
| 5 | Supplying and installation of SEAT/BACK ASSEMBLY: The seat and back should bemade up of 1.2 ±0.1cm. Thick hot pressed plywood and upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam should be designed with contoured lumbar support for extra comfort. BACK SIZE 49.0 cm. (W) x 47.0 cm. (H)SEAT SIZE 49.0 cm. (W) x 44.0 cm.(D), HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam should bemoulded with density = 45 ±2 kg/m3 and Hardness load 16 ± 2 kgffor 25% compression. ARMRESTS: The armrest tops should beinjection moulded from black Polypropylene. They should befitted to tubular armrest supports made of Ø2.54 ±0.03cm. x 0.16 ±0.0128cm.thk. M.S. E.R.W. tube and black powder coated ( DFT 40-60 microns ). The tubular armrest supports hold together the seat and back.TUBULAR FRAME: The tubular frame should becantilever type & made of Ø2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and black powder coated ( DFT 40-60 microns ) (Godrej / Rock worth / Steel Case/ HNI make). |
| 6 | Supplying and installation of Table - T 104 size shall be 1665 Width x 900 Depth x 750 Height. The top panels shall be made from 25 +/- 0.5 mm thick Pre - laminated boards as per with 2 mm thick PVC edge banding on all sides . Understructure shall be made from 0.9 mm +/- 0.09 mm thick powder coated 50 microns (+/-10) CRCA MS. Tubular Frame shall besq. 25.4 +/- 0.3 mm x 1.2 +/- 0.096 mm thick MS ERW tube .Modesty panel shall be made from 1.0 +/- 0.09 mm thick powder coated 50 microns (+/- 10). The Storage shall be having shell 0.5 +/- 0.07 mm thick CRCA MS plus drawer tray 0.5 +/- 0.07 mmthick CRCA MS plus drawer front 0.8 +/- 0.1 mm thick CRCA MS . Also there should be 10 lever cam lock plus handles built in plastic (Godrej / Rock worth / Steel Case/ HNI make). |
| 7 | Supplying and installation of Material: Top 18 mm Melamine laminated Particle Board & rest 15 mm Paper laminated Particle board. Hardware:Screw, KD Fittings, Slides & Castors.Construction:Knock down .Load Bearing Capacity:30 Kgs.Packets:1 No. Finish: Melamine laminated Top & rest Paper lamination (Color: Honey).Dimensions: W 900 X D 500 X H 750 (Godrej / Rock worth / Steel Case/ HNI make). |
| 8 | Supplying and installation of SEAT/BACK ASSEMBLY: The seat and back should be made from 1.2 ±0.1cm.thk.hot pressedplywoodmethod described in.and upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam should bedesigned with contoured lumbar support for extra comfort.* SEAT SIZE: 45.0cm(W) x 42.0cm.(D) BACK SIZE: 40.0cm(W) x 47.0cm.(H), SEAT /,BACK COVERS: The seat and back covers should beinjection moulded in black Co-polymer Polypropylene, HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR polyurethane foam should bemoulded with density = 45 +/-21(g/neand_hardness load 16_± 2 kgffor 25%_compression, ARMREST ASSEMBLY (FOR 7046R): The one-piece armrests should beinjection moulded from black Nylon. The armrests should befitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 cm. thk. HR steel. PERMANENT CONTACT mechanism: The permanent contact mechanism should bedesigned with the following features• 360°revolving type.• 14° ±2°maximum-back-tilt-only.•Upright position locking., Tilt tension adjustment, PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic heightNomenclature continued to 7.1 |
| 9 | adjustment has an adjustment stroke of 11.0 ±0.3cm,TELESCOPIC BELLOW ASSEMBLY: The bellow should be.3 piece telescopic type and injection moulded in black Polypropylene,PEDESTAL ASSEMBLY: The pedestal should beinjection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal should be62.0 ±0.5cm. pitch-centre dia. (72.0 ±1.0cm with castors).TWIN WHEEL CASTORS: The twin wheel castors should beinjection moulded in Black Nylon (Godrej / Rock worth / Steel Case/ HNI make). |
| 10 | Supplying and installation of Sofa 2 seater in synthetic leather (W) 134x (D) 87x (H) 73 cm THREAD: Poly Poplin LEG: Woodscrew provided on frame in addition to M-8 / T-Nut, Plastic, Leg bottom-Pvc. Bush. Material of leg:- Plastic Material Handling Data Sheet (MSDS) for Glue (Godrej / Rock worth / Steel Case/ HNI make). |
| 11 | Supplying and installation of centre table with two drawer and shelf having a size of 1200 into 600 into 367 mm All 18mm pre laminated particle board panels are nice Versailles with walnut edge band, PU lamination is high gloss in Ecru shade. All carcass panel are made of 18mm pre laminated particle board with edge banding 1.5mm thickness. Hardware : Hitachi, Construction : Knock down, Finish : All 18mm pre laminated particles board panels are nice Versailles with ail nut edge band, PU laminating is high gloss in Ecru shade etc as required complete in all respect as per satisfaction of Engineer-in- Charge (Godrej / Rock worth / Steel Case/ HNI make). |
| 12 | Providing and fixing zebra roller blinds of superior quality with required accessories complete in all respect as per satisfaction of Engineer-in-Charge (Vista/ Bizal/Nova/ Shadex make). |
| 13 | Overall Dimensions of Floor Unit 450 W Main shall be 450mm(W)x500mm(D)x2100mm(H) . The construction shall be aesthetically appealing completely knock down construction . Legs shall be fitted with screw type leveler and material shall be from combination of CRCA 0.5 mm & 0.8 mm . The shelving shall be height wise adjustable shelf mounting , each full shelf shall have a load capacity of 40 kg UDL max. and 4 nos. of full adjustable shelves . Finish shall be epoxy powder coated to the thickness of 50 microns.Overall Dimensions of Floor Unit 450 W Metal Doorshall be 448mm(W)x20mm(D)x2058mm(H) . The construction and Materialshall be made from combination of CRCA 0.5 mm & 0.8 mm thickness . Steel Hinged Door with shelf closing hinges .The handle shall be Aesthetically appealing , Ergonomic,Made of Aluminium . The loacking shall be 3 way and Finish shall be Epoxy Powder coated to the thickness of 50 microns etc. complete in all respect as per satisfaction of Engineer-in-Charge (Godrej / Rock worth / Steel Case/ HNI make). |
| 14 | Overall Dimensions of Floor Unit 800 W Add On shall be 800mm(W)x500mm(D)x2100mm(H) . The construction shall be aesthetically appealing completely knock down construction . Legs shall be fitted with screw type leveler and material shall be from combination of CRCA 0.5 mm & 0.8 mm . The shelving shall be height wise adjustable shelf mounting , each full shelf shall have a load capacity of 40 kg UDL max. and 4 nos. of full adjustable shelves . Finish shall be epoxy powder coated to the thickness of 50 microns . The add on units shall be stacked widthwise to form a row of storage having a common side panel.Overall Dimensions of Floor Unit 800 W Metal Doorshall be 398mm(W)x20mm(D)x2058mm(H) . The construction and Materialshall be made from combination of CRCA 0.5 mm & 0.8 mm thickness . Steel Hinged Door with shelf closing hinges .The handle shall be Aesthetically appealing , Ergonomic,Made of Aluminium . The loacking shall be 3 way and Finish shall be Epoxy Powder coated to the thickness of 50 microns etc. complete in all respect as per satisfaction of Engineer-in-Charge (Godrej / Rock worth / Steel Case/ HNI make). |
| 15 | Supplying and installation of Laboratory module (Waldner / Kotterman / Godrej make)with work surface of following size with V-groove type moulding jet black Granite 20mm + - mm thick as per layout along with neoprene strip 2.5” width and 6mm thick SR 998 glue for neoprene mat complete in all respect as per satisfaction of Engineer-in-charge as well as concerned deptt. The following size of storage unit and other articles of module labs. are as under: AT-600W-750D-9H – 1 No.AT-450-750D-9H – 1 No.AT-1200W-750D-9H – 4 Nos.AT-1050W-750D-9H – 1 No.UBC-600W-450D-674H-2S-1D -6 Nos.UBC-450W-450D-674H-1S-1D -3 Nos.WT-2S-GS-900W-635H– 2 Nos.WC-600WW-320D-674H-2S – 6 Nos.LS-PLAIN-600W-9H– 4 Nos.RP-750D-9H-2 Nos.CT-750D-9H-1 No. Nomenclature continued to 13.1 |
| 16 | TRUNKCING – 7 Nos.SIDE PANELS FOR INLINE UNIT – 1 No.DOOR FRAME FOR INLINE SINK UNIT – 1 No.PP DROP SINK 560X355mm– 1 No.3 WAY WATER FAUCET 100/32 – 1 No.6/16A, 6 Pin Shutter Socket – Model no. M1332(LOOPING WITH OLD WIRING) - 14 Nos.IACI24SA3G3C- 1 No.16A, 1 Way Switch – Model no. M0130 (LOOPING WITH OLD WIRING) - 14 Nos. |
| 17 | Providing and fixing P.V.C. waste pipe 32mm dia for wash basin and sink complete in all respect as satisfaction of Engineer- in-charge. |
| 18 | Providing and fixing to wall ceiling and floor galvanized mild steel tube (medium grade) tube fittings and clamps including making good the wall, ceiling and floor complete in all respect as per satisfaction of Engineer-in-charge Jindal / Surya make.a) 15mm nominal bore |
| 19 | Providing and fixing C.P. brass angle valve without nuts and pipe complete in all respect as per satisfaction of Engineer-in-charge. (Smile/ sparton/ seiko make). a) 15mm dia |
| 20 | Providing and fixing PVC connection pipe with brass union complete in all respect as per satisfaction of Engineer-in-charge. a) 45cm length i) 15mm nominal bore. |
| 21 | Providing and fixing PVC floor trap with grating ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete in all respect as per satisfaction of Engineer-in-charge (Filolex / Vectus / D-Plast make).a) 110mmx75mm |
| 22 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Vectus/D-plast make).a) 75mm dia |
| 23 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Vectus/D-plast make).a) 75mm dia |
| 24 | Providing and fixing PVC door bend ISI marked complete including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Vectus/D-plast make).a) 75mm dia |
