Plugging Of 8 Nos Non Feasible Gaps In The State Of Tripura Along Indo Bangladesh Border Ibb Regarding(Sh Supplying Installation And Commissioning Of High Mast Lighting For Gin 593 In Aor 03 Bn Bsf ( Now105 Bn Bsf) Under Shq Panisagar) Plugging Of 8 Nos N
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Feb 2022
0 days left
EMD
26779
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
panisagar → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Plugging Of 8 Nos Non Feasible Gaps In The State Of Tripura Along Indo Bangladesh Border Ibb Regarding(Sh Supplying Installation And Commissioning Of High Mast Lighting For Gin 593 In Aor 03 Bn Bsf ( Now105 Bn Bsf) Under Shq Panisagar) Plugging Of 8 Nos Non Feasible Gaps In The State Of Tripura Along Indo Bangladesh Border Ibb Regarding(Sh Supplying Installation And Commissioning Of High Mast Lighting For Gin 593 In Aor 03 Bn Bsf ( Now105 Bn Bsf) Under Shq Panisagar)
BOQ
| Sl. No. | Item Description |
| 1 | High Mast |
| 2 | SITC of 16 Mtr high mast shaft in two sections suitable for 55 m/sec wind speed, with head frame , winch mounting bracket, luminaries carrige suitable to install 12 nos luminaries in symmetrical arrangement including Aviation Light on the existing High Mast Foundation. |
| 3 | Providing & fixing of raising lowering system comprising double drum winch, 5 mm diameter SS wire rope, trailing cable , connector , intrgral power tool motor, manual handle, junction box, lightening finial. (wiring material from JB to individual luminarie & MCB in base compartment areincluded and are the part of installation) |
| 4 | Providing & fixing of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template. |
| 5 | Supplying & fixing of 200 watt LED flood fitting Presssure Die Cast with IP66 protection, efficient high output emitter LED for better distribution., on existing pole, including wiring with 3 x 4 Sqmm (from looping box to LED fitting), PVC insulated & PVC sheathed multi core, copper condoctor cable & making connection of LED flood light fitting etc. as required |
| 6 | S/ITC of outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic swictching of luminaries, power tool control with 2 nos 9A contactors and raise lower push button, incoming 35 sq mm and outgoing as per requirment. |
| 7 | Foundation |
| 8 | Earth work in excavation by mechanically means (Hydraulic excavator)/ manual means over areas(exceeding 30 cm in depth,1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed. All kinds of soil.(3 mx 3 mx2.5m) |
| 9 | Centering& shuttering i/c sturring, propping etc and removal of form work for foundations & footings for Foundations, footings, bases of columns, etc. for mass concrete. 2.7x .3x4+.3x3x4=3.24+3.6=6.84 for 02 Nos |
| 10 | Providing and laying in position specified grade of reinforcedcement concerte, excludilng the cost of centering ,shuttering, finishing and reinforcement-all work up to plinth level:1:1.5:3 ( 1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) (.9x.9x2.7m)+ .3x3x3=(2.187+2.700=4.887) for 02 =9.774 |
| 11 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC Sheathed/XLPE aluminium coductor cable of 1.1 KV grade as required i) 3.5X 35 sqmm (22mm) |
| 12 | Steel reinforcement for R.C.C. work including straightening , cutting, bending, placing in position and binding all complete above plinth level.(Thermo Mechanically Treated bars)(20nos-12 mm Vertical bar lenght of 1.995 mtr ,9-nos-8mm stirrupusbar each-3.392mtr) 44 nos Cross bars of 10 mm length of 2.6 mtr |
| 13 | Earthing |
| 14 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 15 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc.as required. |
| 16 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required |
| 17 | Service conection |
| 18 | Supplying & laying of one number XLPE insulated and PVC sheathed armoured aluminium power cable of 1.1 KV Grade of size 3.5x35 Sq. MM conf to IS: 7098 (Part-I)direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. |
| 19 | Supplying & laying of one numberXLPE insulated and PVC sheathed, armoured aluminium power cable of 1.1 KV Grade of size 3.5X35 Sq. MM conf to IS: 7098 (Part-I) in the existing METAL PIPE / IN OPEN as required. |
| 20 | Add 31.36% % cost index on DSR items2.01 to 3.03 (Rs 187356.17/-) etc complete |
AI Tender Summary
Tender Timeline
Jan 31, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 22, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 23, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender