Construction Of Cc Drain From Madan House To Mahananda River At Phansidewa-I Sansad Within Phansidewa Bansgoan Kismat Gp Under Phansidewa Block Under 15Th Fc Tied Fund For The Year 2021-22 ( Saap No-03 / Pbkgp / 2021-22 )
Tender Value
5.83 Lakhs
Estimated cost
Bid Submission
07 Feb 2022
0 days left
EMD
11700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
phansidewa → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Cc Drain From Madan House To Mahananda River At Phansidewa-I Sansad Within Phansidewa Bansgoan Kismat Gp Under Phansidewa Block Under 15Th Fc Tied Fund For The Year 2021-22 ( Saap No-03 / Pbkgp / 2021-22 )
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for StructuresEarth work in excavation of foundation of structuresas per drawing and technical specification,including setting out, removing, spreading orstacking of spoils within a lead of 150 m. as directedand including trimming the sides of the trenches ,leveling, dressing and ramming the bottom, andbackfilling with approved material complete as perdirection of the Engineer-in-Charge .I. In all sorts of soil excluding marshy soil & rocks(soft or hard) by manual means.a) upto 3 m depth.(iv) Without pumping out water and shoring |
| 2 | Labour for laying 150mm to 200mm boulder soling including rough dressing earth,rolling and preparing the bed to proper level and filling up all joints with sandy clay and earth. |
| 3 | Cost of stone bolders 150mm of North Bengal variety including delivery and stacking at site. |
| 4 | Providing and laying Design Mix concrete for plain /reinforced concrete work in any part of bridge(excluding bottom plugging) with coarseaggregates of appropriate nominal size andgrading, fine aggregate (sand) conforming toproper grading zone, both of approved quality andcement, as necessary, including labour, cost andcarriage of all materials and including preparationof design mix, approval of the same by theEngineer-in-Charge and cost for quality control, sampling, testing etc. all complete but excludingcost of labour and materials for formwork &reinforcement works.(a) M-15 GradeUsing concrete mixer |
| 5 | Providing and laying Design Mix concrete for plain /reinforced concrete work in any part of bridge(excluding bottom plugging) with coarseaggregates of appropriate nominal size andgrading, fine aggregate (sand) conforming toproper grading zone, both of approved quality andcement, as necessary, including labour, cost andcarriage of all materials and including preparationof design mix, approval of the same by theEngineer-in-Charge and cost for quality control, sampling, testing etc. all complete but excludingcost of labour and materials for formwork &reinforcement works.(a) M-20 GradeUsing concrete mixer |
| 6 | Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, cross drain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction. |
| 7 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excludingcost of chipping over concrete surface](ii) With 1:6 cement mortar(a) 15 mm thick plaster |
| 8 | Neat cement punning about 1.5mm thick in wall, dado, windowsill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m. |
| 9 | Supplying, fitting and placing HYSD barreinforcement in Sub-structure including initialstraightening, straightening of coils bars, removal ofloose rust (if any), cutting to requisite lengthbending, binding with annealed wire not less than 1mm in size and conforming to IS 280 at everyintersection hooked and bent to correct shape andplaced on forms etc. including cost of blackannealed wire and cost of loading, unloading,carriage of all steel materials complete as perdrawing and technical specifications and directionof Engineer-in-charge. |
| 10 | Supply Fitting, Fixing RCC Display Board at work site. L/S |
| 11 | ADD :- GST (SGST @ 6 % and CGST @ 6 %) @ 12 % on estimated amount. |
| 12 | ADD :- Labour Wealfare CESS @ 1 % on estimated amount. |
AI Tender Summary
Tender Timeline
Jan 31, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 07, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 09, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender