Providing Electrification To Led Street Light Fitting Animal Husbundary Building Center Shrni-2 At Indapur Tq.Washi. As Per Boq
Tender Value
2.23 Lakhs
Estimated cost
Bid Submission
07 Feb 2022
0 days left
EMD
2231
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
indapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Electrification To Led Street Light Fitting Animal Husbundary Building Center Shrni-2 At Indapur Tq.Washi. As Per Boq
BOQ
| Sl. No. | Item Description |
| 1 | Item No.1)Supplying and erecting UPVC reinforced flexible conduit 25mm in dia. conforming to I.S. with required number ofcouplings, PVC bushes, check nuts etc. complete. |
| 2 | Item No.2)Supplying and erecting PVC trunking (PVC casing-ncapping)of size 32 mm with accessories on wall/ceiling asper specification No: WG-MA/CON |
| 3 | Item No.3) Supplying & erecting mains with 2x1.5 sq.mm F.R copperPVC insulated wire laid in provided conduit/trunking/insidepole/Bus bars or any other places as per specification No: WGMA/BW |
| 4 | Item No.4) Supplying & erecting mains with 1x1.5 sq.mm F.R copperPVC insulated wire laid in provided conduit/trunking/insidepole/Bus bars or any other places as per specification No: WGMA/BW |
| 5 | Item No.5) Supplying & erecting mains with 2x4 sq.mm F.R copper PVCinsulated wire laid in provided conduit/trunking/insidepole/Bus bars or any other places as per specification No: WGMA/BW |
| 6 | Item No.6) Supplying and erecting ISI mark modular type switch 6A / 10Aduly erected on provided plate and box with wiring connectionscomplete. |
| 7 | Item No.7) Supplying and erecting ISI mark modular type switch 16A dulyerected on provided plate and box with wiring connectionscomplete. |
| 8 | Item No.8) Supplying and erecting ISI mark modular type 3 pin 6A multisockets with safety shutter, duly erected on provided plate andbox with wiring connections complete |
| 9 | Item No.9) Supplying and erecting ISI mark modular type 3 pin 6 / 16Amulti socket with safety shutter, duly erected on providedplate and box with wiring connections complete |
| 10 | Item No.10) Supplying and erecting ISI mark modular type (two module)electronic step regulator for fan, duly erected on providedplate and box with wiring connections complete.Note: Add Rs 57/- for additional two module box withdouble mounting plate if required. |
| 11 | Item No.11) Point wiring for independent plug in PVC trunking (casingcapping)with 1.5 sq.mm (2+1E) FR grade copper wire withflush type switch and required accessories as per specificationNo: WG-PW/SW |
| 12 | Item No.12) Point wiring in PVC trunking (casing-capping) with 1.5sq.mm (2+1E) FR grade copper wire, modular type switch,earthing and required accessories as per specification No:WG-PW/SW |
| 13 | Item No.13) Supplying, erecting & marking SPMCB 6A to 32A, C-series (formotor/power) in provided distribution board as per specificationno. SW-SWR/MCB |
| 14 | Item No.14) Supplying, erecting & marking SPMCB 6A to 32A, B- series (forlighting) in provided distribution board as per specification no. SWSWR/MCB |
| 15 | Item No.15) Supplying, erecting & marking DPMCB 40A to 63A, C- series (for motor/power) in provided distribution board as per specificationno. SW-SWR/MCB |
| 16 | Item No.16) Supplying, erecting & marking TPN MCB 40A to 63A, C- series in provided distribution board as per specification no. SW-SWR/MCB |
| 17 | Item No.17) Supplying and erecting ISI mark modular type bell-push 6A /10A duly erected on provided plate and box with wiringconnections complete |
| 18 | 18.Supplying and erecting ISI mark modular type bell indicator,duly erected on provided plate and box with wiring connections |
| 19 | 19.Supplying and erecting bulkhead fitting suitable for upto LEDupto 12W fixed on wall. As per specification no. FG-IDF/BHF |
| 20 | 20.Supplying & erecting LED 20W tube light fitting (4 feet) withaluminium housing, heat sink, integrated HF electronic drivercomplete. |
| 21 | 21.Supplying & erecting 10-12W, 230V integral type LED Lampsuitable for B-22/E-27 base. |
| 22 | 22.Supplying and erecting PVC Surface modular switch box withdouble mounting plate for 12 modules duly erected. |
| 23 | 23.Supplying and erecting PVC Surface modular switch box withdouble mounting plate for 6 modules duly erected. |
| 24 | 24.Supplying and erecting ISI mark G.I. pipe pole „B? grade 80 mmdia 6 m long with pole cap, base plate in provided foundation as perspecification no. OH-PL/GIP |
| 25 | 25.Supplying, erecting & terminating XLPE armoured cable 2 core 6sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I.earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/CU |
| 26 | 26.Supplying and laying (including excavation of suitable width &depth up to 90 cm) 50 mm outside dia. double wall corrugatedpipes (DWC) of HDPE for enclosing cable below ground/roadsurface, to required depth complete. |
| 27 | 27.Supplying and erecting Street light bracket made from 25 mm.dia =B‘ class G.I. Pipe, 0.6 m in length along with pole cap of 300mm length and 80 mm dia duly welded with provided leads as perspecification no. FG-BKT/BPC |
| 28 | 28.Supplying and erecting LED Street light fitting suitable forabove 40W to 48W lamp, including lamp, with PF > 0.95 classIP 65 and above housing of pressure die cast aluminium alloy andheat sink extruded aluminium complete as per specification No .FG-ODF/FLS2. |
| 29 | 29.Providing earthing with galvanized iron earth plate size 60 x 60 x0.6 cm complete with all materials, testing & recording the results asper specification no. EA-EP |
| 30 | 30.Supplying & erecting FRP box of size 150 x 125 x 100 mm, 2.7 mmthick complete on pole/wall as per specification no. CB-SB |
| 31 | 31.Making cement concrete foundation including excavation ( 45 x 45 x 120 ) cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal,(45 x 45 x 45) cm / 45 cm dia. x 45 cm height plinth duly plastered,with necessary curing and finishing complete. (for 6 m pole) |
| 32 | 32.Supplying and erecting Street light bracket made from 25 mm.dia =B‘ class G.I. Pipe, 0.6 m in length along with pole cap of 300mm length and 80 mm dia duly welded with provided leads as perspecification no. FG-BKT/BPC |
| 33 | 33.Supplying & erecting G.I. pipe „A? class 40 mm dia. erected forenclosing XLPE armoured cable on wall/pole as per specificationno. CB-CE |
| 34 | 34.Supplying and erecting five star rated energy saving Ceiling fan230 V A.C. 50 cycles 1200 mm complete erected in position as perspecification no. FG-FN/CF |
| 35 | 35.Supplying & fixing anchor type fastener fan hook, with 2 nos. of10 mm dia x 75 mm long with necessary materials for ceiling fan. |
AI Tender Summary
Tender Timeline
Jan 31, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 07, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 08, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender