Construction Of New Blbh 1250 Sq Feet Inside Area In / C Generator Room Under State Plan 2021-22 At Kamrangabari Under Gournagar Block, Unakoti District 2Nd Call Construction Of New Blbh 1250 Sq Feet Inside Area In / C Generator Room Under State Plan 202
Tender Value
16.04 Lakhs
Estimated cost
Bid Submission
14 Feb 2022
0 days left
EMD
16044
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
gournagar → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of New Blbh 1250 Sq Feet Inside Area In / C Generator Room Under State Plan 2021-22 At Kamrangabari Under Gournagar Block, Unakoti District 2Nd Call Construction Of New Blbh 1250 Sq Feet Inside Area In / C Generator Room Under State Plan 2021-22 At Kamrangabari Under Gournagar Block, Unakoti District 2Nd Call
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan) including dressing of side sand ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, with in a lead of 50 m.-All kinds of soil. |
| 2 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope ,ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level: 1:4:8(1 Cement :4fine sand: 8 graded well burnt brick aggregate 40 mm nominal size For column base |
| 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments ,posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement- 1:2:4(1Cement:2finesand:4gradedstoneaggregate20 mm nominal size) |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spirals taircases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement- (i) 1:2:4(1Cement:2finesand:4gradedstoneaggregate20 mm nominal size)cum |
| 6 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-MechanicallyTreatedbarsofgradeFe-500Dormorekg |
| 7 | Centering shuttering including struttings, propping etc. and removal of form work for i) Columns, Pillars, Piers, Abutments, Posts and Struts with woodenplank |
| 8 | Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank |
| 9 | Suspended floors, roofs, landing, balconies and access platform with timber planks. |
| 10 | First class brick work in foundation and plinth including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ). For step |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level: 1:2:4(1Cement:2 fine sand:4 graded well burnt brick aggregate 20 mm nominal size) |
| 12 | Half brick masonry work with first class bricks in super structure upto floor five level including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 13 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc. ,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. |
| 14 | Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet was hers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on over lapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (i) 0.63mm thick with zinc coating not less than 275gm/m2 |
| 15 | Providing ridges or hips of width 60c mover all width plain G.S. sheet fixed with polmer coated J or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washerscomplete. (I) 0.63mm thick with zinc coating not less than 275gm/m2metre. |
| 16 | Providing structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required. |
| 17 | Providing and fixing hard drawn steel wire fabric 75 x 25 mm mesh of weight not less than 3.76 kg per sqm to outside fencing filled with M.S. Angle or flat frame by electric welded as direction of the Eng-in- Charge (Frame work to paid separately) |
| 18 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40 x6mm angle iron and 3mm M.S. gusset plate sat the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embed ding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steelprimeretc. complete as required:Using flats 30x6mm for diagonal braces and central cross piece. |
| 19 | Providing and laying cement concrete 1:2:4 (1cement: 2 fines and: 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, round in go fedges and strips etc. complete. 25 mm thick with 12.5 mm well burnt brick aggregate |
| 20 | 12 mm cement plaster of mix Cement mortar 1:4 (1 cement : 4 fine sand) |
| 21 | 15mm cement plaster on the rough side of single or half brick wall of mix: Cement mortar 1:4 (1 cement : 4 fine sand) |
| 22 | Neat cement Punning |
| 23 | Applyingonecoatof water thinnable cement primer of approved brand and manufacturer on wall surface complete. Water thinnable cement primer |
| 24 | Finishing walls with water proofing cement paint of required shade of approved brand and manufacture [Payment shall be made after submission no f Test Certificate issued by the Manufacturer] : New work ( two or more coats applied @ 3.84 kg/10 sqm) |
| 25 | Applying priming coat [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : With ready mixed red oxidezincchro mate primer of approved brand and manufacture on steel galvanise diron/ steel works. |
| 26 | Painting with synthetic name l paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: Two or more coats on new work. |
| 27 | Drilling and boring pilot hole in soil strata by manual means, collection of soil samples of different strata met with during at various suitable levels, preservation of sample in polythene bags/sample boxes and disposal of excess soil of mud, including the cost for water etc. As required to maintain the pilot hole properly as per specification and direction of the Engineer-in-Charge. 100mm dia |
| 28 | Reaming of pilot hole to an enlarged bore hole in any soil strata by manual means, disposal of excess soil of mud, including the cost for water etc. As required to maintain the bore hole properly as per specification and direction of the Engineer-in-charge. From 100mm dia upto 250mm dia bore hole |
| 29 | Washing and development of tube well by using hand pump or by any suitable method and testing of the well as per specification and direction of the Engineer-in-charge. |
| 30 | Providing and lowering of UPVC pipe as per IS 12818 after washing of the bore hole by manual means as per specification and direction of the Engineer-in-charge. 75 mm dia |
| 31 | Providing and lowering of UPVC pipe as per IS 12818 after washing of the bore hole by manual means as per specification and direction of the Engineer-in-charge. 75 mm dia |
| 32 | Providing and shrouding of the deep tube well assembly with washed pea gravels (2.0.4.75mm effective size)as per specification (IS:4097)and direction of the Engineer-in-charge. |
| 33 | Providing & installation of 1H.P submersible pump (Make- Kirloskar, Cromption, Duke etc,51-81m head, 5 stage, discharge = 60-180 LPM, Single Phase) etc. complete. |
| 34 | Development of DT well by suitable compressor complete as per direction of Engineer-in-charge. |
| 35 | Providing and connection with submersible pump set (motor of submersible cable joint less (2.50sq mm/flat/20amp) |
| 36 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.Internal work - Exposed on wall. 25 mm nominal bore |
| 37 | Providing and fitting, fixing safely/ rest clamp as per required size of approved quality with nuts and bolt etc. Complete as per direction of the Engineer-in-charge. |
| 38 | Providing and fixing of G.I bend of appd. Quality complete. |
| 39 | Providing and fixing ball valve (brass) of approved quality High or low pressure, with plastic floats complete : 25mm nominal bore |
| 40 | Providing and fitting fixing with PVC insulated single core multistoried copper cable conforming to IS : 694 for inter connection with all electrical equipments of the panel board as per specification and direction of the Engineer-in-charge. |
| 41 | Hiring charge for vehicle Maruti Omni/Maruti Wagon R/ Maruti Eco etc. (Haltage and milege) will be recorded and signed by both the Engineer-in-charge and the agency. |
| 42 | Transportation charge for work supervision by Maruti Omni/Maruti Wagon R/ Maruti Eco(As needed time by the Engineer-in-charge the agency will arrange vehicle as mentioned above at his own cost and risk. |
AI Tender Summary
Tender Timeline
Jan 31, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 14, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 15, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender