Tender For Iritty Municipality Proj No 177 / 22 Mini Mcf
Tender Value
8.89 Lakhs
Estimated cost
Bid Submission
08 Feb 2022
0 days left
EMD
22230
Bank guarantee accepted
Document Fee
1780
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
iritty → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Iritty Municipality Proj No 177 / 22 Mini Mcf
BOQ
| Sl. No. | Item Description |
| 1 | MINI MCF |
| 2 | 2.1.1 : Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil |
| 3 | 4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 4 | 10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 5 | 10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 6 | 13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work |
| 7 | od1629303/2021_2022 : od211465/2019_2020 :<br>Providing ridges or hips 225mm flaps with 0.63mm thick G.I. Sheet or nearest available size including ss screws plan washers Bitumen washers etc complete |
| 8 | od1629299/2021_2022 : Providing and fixing precoated galvanisediron profile sheets (size, shape and pitch of <br>corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated <br>thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-<br>7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. <br>Sheet should •have protective guard film of 25 microns minirnum to avoid scratches <br>during transportation and should be supplied in single length upto 12 metre or as desired <br>by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of <br>size ,( 5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or <br>curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to <br>size and shape wherever required. (ROOFING SHEET) |
| 9 | 13.71 : Lettering with black Japan pint of approved brand and manufacture |
| 10 | od1629480/2021_2022 : Supplying and fixing pad lock |
| 11 | od1629317/2021_2022 : Laterite neatly dressed stones of size 35x20x20 cm in cement mortar 1:6 for foundation and basement or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc |
| 12 | 13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand) |
AI Tender Summary
Tender Timeline
Jan 31, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 08, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 14, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender