Provn Of One Toilet Two Urinal Pts Etc Provn Of Individual Kenells And Certain Other Sanctioned Works Under Ge Sukna Provn Of One Toilet Two Urinal Pts Etc Provn Of Individual Kenells And Certain Other Sanctioned Works Under Ge Sukna
Tender Value
41.50 Lakhs
Estimated cost
Bid Submission
18 Feb 2022
0 days left
EMD
83000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sukna → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provn Of One Toilet Two Urinal Pts Etc Provn Of Individual Kenells And Certain Other Sanctioned Works Under Ge Sukna Provn Of One Toilet Two Urinal Pts Etc Provn Of Individual Kenells And Certain Other Sanctioned Works Under Ge Sukna
BOQ
| Sl. No. | Item Description |
| 1 | BOQ Part-I (B/R Work) |
| 2 | Surface dressing not exc. 15 cm deep as in soft / loose soil complete all as specified and directed. |
| 3 | Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning filling in and ramming earth in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good in soft/loose soil complete all as specified and directed. |
| 4 | Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed. |
| 5 | All as per Sl item No. 1.03 above but exc 1.5 m & not exc 3.0 m deep |
| 6 | M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 7 | M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 8 | M&L brick work withsub class\"B\" brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed. |
| 9 | M&L brick work with sub class \"B\" bricks straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall and including provision of 02 Nos. 8 mm dia TMT bars in full length of wall at every fourth course complete all as specified and directed. |
| 10 | Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed. |
| 11 | Removing of excavated surplus soil to a distance n. exc 50 m and depositing wheredirected at a level n. exc. 1.5 m above the starting point complete all as specified and directed. |
| 12 | M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.Note:- Consolidated thickness shall only be measured and paid. |
| 13 | M&L hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. |
| 14 | M&L 75 mm thick, PCC 1:4:8, type D-2(using 40 mm graded crushed stone aggregate) as in sub base etc, complete all as specified and directed. |
| 15 | M&L 75 mm thick, PCC 1:3:6, type C-1(using 20 mm graded crushed stone aggregate) as in floors, paths, plinth protection, hardstanding etc. complete all as specified and directed. |
| 16 | M&L 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and fair complete all as specified and directed. |
| 17 | M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface using water proofing compound as per manufacturers instructions finished even and smooth without using extra cement complete all as specified and directed.Note:- WPC shall be measured and paid separately. |
| 18 | Supplyonly liquid water proofing compound complete all as specified and directed. Make:- Fosroc chemicals / STP Ltd / M/s Sika India Ltd / Hindcon Chemicals Limited / M/s IWL Limited |
| 19 | M&L RCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 20 | M&L RCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 21 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete complete all as specified and directed. |
| 22 | Use and Waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed. |
| 23 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal in plan for rough finished surfaces of concrete complete all as specified and directed. |
| 24 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed. |
| 25 | M&Lmild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 26 | All as per Sl item No. 1.24 above but 6 to 8 mm dia. |
| 27 | All as per Sl item No. .24 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders. |
| 28 | S&F steel ventilator with top hung shutter and including hinges steel peg stay complete all as specified and directed.Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri |
| 29 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in square n.exc 0.50 sqm in each pane complete all as specified and directed. Make:- Asahi India Glass Ltd. / Saint Gobain / Modiguard / Triveni Float / IAG / Hindustan Pilkington |
| 30 | All as per Sl item No. 1.28 above but figured glass, pin head type. |
| 31 | S&F framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 (Gde-E-165) complete all as specified and directed. |
| 32 | M&L preparation of new plastered wall surfaces and inlcuding applying three coats of white wash complete all as specified and directed. Make :- Rajasthan / Apple / Surya |
| 33 | M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac) |
| 34 | M&L preparation of new plastered wall surfaces and including applying two coats of oil bound distemper overa coat of primer and over wall care putty (1 to 2 mm thick) to obtain smooth finish completeall as specified and directed. Make of oil bound distemper :- Bison (Berger) / Tractor (Asian) / ICI (Super Cote) Make of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints |
| 35 | M&L preparation of new plastered wall surfaces and including applying two coats of cement base paint over a coat of primer complete all as specified and directed.Make :- Jotun India Pvt Ltd / Snowcem Plus / Berger Paints /Asian Paints (Gutucam) / Crimocem Super Cement paints |
| 36 | M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchlaid over andincluding screed bed 15 mm thick in CM 1:4 complete all as specified and directed.Make:-M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd |
| 37 | M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchlaid over andincluding screed bed 15 mm thick in CM 1:4 complete all as specified and directed.Make:-M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd |
| 38 | All as per Sl item No. 1.36 abovebutin skirting / dado etc. laid over andincluding screed bed 10 mm thick in CM 1:3. |
| 39 | M&L coloured glazed ceramic tiles 300 x 450 x 7 mm thickas in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 complete all as specified and directed. Make :-M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) /Orient Bell Ltd / H & R Johnson India Ltd |
| 40 | S&F 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc.) and fixed to wall / ceiling or laid in / on floor complete all as specified and directed.Make - Tata / Jindal Steel / Surya Roshni Ltd. /Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd |
| 41 | All as per Sl item No 1.39 above but 20 mm bore. |
| 42 | S&F vitreous china wash hand basin white flat back of size not less than 550 x 400 mm with and including PVC waste pipe 32 mm bore, CP waste fitting and cutting for and pinning in ends of brackets etc,complete all as specified and directed. Make of wash hand basin:- Hindware / Cera (Med Range) / M/s Jaquar & Company Pvt Ltd (Essco)Make of waste fitting - Prayag / M/s Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection ) / Cera (Med Range) Make of PVC waste pipe - Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf |
| 43 | S&F pillar tap 15 mm bore, cast copper alloy, with capstan head, chromium plated, screweddown high pressure, with or without lettered “hot\" or “cold” with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. Make:- M/s Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series) |
| 44 | S&F waste fitting 32 mm bore, brass, chromium plated forbasins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.Make :- Prayag / Essco / Hindware (Less Italian Collection ) / Cera (Med Range) |
| 45 | S&FPVC connections 15 mm size with PTMT nuts, of length 450 mmcomplete all as specified and directed.Make:- Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf |
| 46 | S&F 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washer complete all as specified and directed. Make :- Prayag / Zircon / Cera / Saint Gobain / Modiguard |
| 47 | S&F 32 mm bore PVC waste pipe for WHB / Sink etc. complete all as specified and directed. Make:- Prayag / Pearl Precision Products Pvt Ltd / Polytuf |
| 48 | S&F 40 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 and fixed complete to wall, ceiling or in floors etc complete all as specified and directed.Make:- Supreme / M/s Ori-Plast Limited / M/s SHK Polymers |
| 49 | S&F 15 mm bore bib tap chromium plated fancy type, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed.Make:- M/s Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series) |
| 50 | S&F 15 mm bore bib taps, long body chromium plated, fancy type, cast copper alloy with crutch or butterfly handle and wall flange, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed.Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series) |
| 51 | S&F in repairs vitreous china european water closet pan (pedestal pattern) white in colour with fixing bolts and flush pipe, connection to trap and to flushing cistern and all joints, including plastic water closet seat cover white, closedpattern with flat bottom and cover and mild steel CP hinges complete all as specified and directed.Make of Water Closet:- Hindware, (Starwhite) or equivalent in Cera (Med Range) / EsscoMake of Seat cover:- Hindware, Model -Seat Cover Standard (Starwhite) or equivalent in Cera (Med Range) / Essco |
| 52 | S&F vitreous china squatting pan, \"Orissa pattern\"white, size 580 x 440 mm with integral foot rest,\"P\" or \"S\" trap and excluding connection to trap and to flushing pipe, CI anti -syphonage pipe complete all as specified and directed. Make:- Hindware / Cera (Med Range) / M/s Jaquar & Company Pvt Ltd (Essco) |
| 53 | S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf, size not less than 125 mm wide & 500 mm long, with brass chromium plated bracket guard and railing complete all as specified and directed.Make:- Prayag / Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection) / Cera (Med Range) |
| 54 | S&F towel rail, 18 mm (minimum) dia & 600 mm long of stainless steel chromium plated, fixed with and including chromium plated brass screws and wooden / plastic cleat complete all as specified and directed.Make:- M/s Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series) |
| 55 | S&F in repairs towel rail 20 mm dia & 600 mm long of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleat complete all as specified and directed.Make:- Prayag or equivalent in Essco / Hindware (Less Italian Collection) / Cera (Med Range) |
| 56 | S&F grating doom 100 mm dia of PTMT (minimum weight 25 gms) fixedto floor trap complete all as specified and directed.Make:- Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf |
| 57 | S&F 15 mm borejet spray (butterfly type) steel body, with and including 1.5 m steel tube complete all as specified and directed.Make :- Prayag / Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection) / Cera (Med Range) |
| 58 | S&F angle stop cock 15 mm bore, cast copper alloy, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or unions and fixed, fancy type, chromium plated long thread with flange complete all as specified and directed.Make:- M/s Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series) |
| 59 | S&F PVC low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets & 32 mm dia PVC flush bend pipe complete all as specified and directed. Make of Cistern:- Hindware / Cera (Med Range) / EsscoMake of Bend Pipe:- Hindware (Less Italian Collection) / Cera (Med Range) / Essco |
| 60 | S&Fsolid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing (SSR - 2020 Part-II Rates) complete all as specified and directed. Make:- Rajshri Plastiwood Ltd /M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd |
| 61 | S&F 105 x 60 mm size pressed steel door frames for doorswith one or more rebates and including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri |
| 62 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes fortop rails, bottom rails stiles & lock rail. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification complete all as specified and directed.Make:- Rajshri Plastiwood Ltd /M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd |
| 63 | S&F 125 mm long aluminium, anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed.Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries |
| 64 | All as per Sl item No 1.62 above but 150 mm long. |
| 65 | All as per Sl item No 1.62 above but 200 mm long. |
| 66 | S&F 100 mm butt hinge, medium weight, cold rolled mild steelcomplete all as specified and directed. Make:- M/s Mowjee / M/s Crown / M/s Everite / M/s Harrison |
| 67 | S&F 100 mm Aluminium handles cast type, anodisedand fixed complete all as specified and directed.Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries |
| 68 | S&F 125 mm Aluminium handles cast type, anodisedand fixed complete all as specified and directed.Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries |
| 69 | S&F 150 mm Aluminium handles cast type, anodisedand fixed complete all as specified and directed.Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries |
| 70 | S&F soap dish with ABS chromium plated base and polycarbonate holder of dia not less than 110mm,fixed to plugs with chromium plated brass screws complete all as specified and directed. Make:- M/s Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series) |
| 71 | S&F 75 mm bore PVC (SWR) floor trap, plain with grating and including jointing with solvent cement complete all as specified and directed.Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited |
| 72 | M&L PCC 1:4:8, type D-2 using 40 mm graded crushed stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed. |
| 73 | S&F 150 mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed. |
| 74 | S&F PVC (SWR) gully trap of 125 / 110 mm, setting and jointing with solvent cement and including top cover complete all as specified and directed.Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited |
| 75 | S&F 4 mm thick non asbestos fibre cement building boards (designer pattern) fixed or laid / inserted to aluminium framework with screws in false ceiling (flat or sloping) of grid size 605 x 605 mm and including anodised aluminium snap grid frame work for false ceiling hanging from structural steel / scantling with 6 mm GI wire complete all as specified and directed.Make of boards:- Everest / Visaka Industries / Lafarge / ArmstrongMake of aluminium snap grid:- M/s Saint-Gobain Gyproc India Pvt Ltd / M/s USG Boral Building Products (India) Pvt Ltd / M/s PR Ceiling Products |
| 76 | S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited |
| 77 | S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited |
| 78 | All as per Sl item No. 1.76 above but75 mm bore. |
| 79 | S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited |
| 80 | S&F PVC (SWR) 110 mm bore bend with access door, of any radiuscomplete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited |
| 81 | S&F PVC (SWR) 110 mm bore bend of any radiuscomplete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited |
| 82 | All as per Sl item No. 1.80 above but75 mm bore. |
| 83 | S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited |
| 84 | S&F in repairs 150 mm bore, cast iron soil, waste and vent pipe (sand cast) in any length with or without ears, jointed with cement joints fixed to walls complete all as specified and directed.Make :- Electro steel / BIC / PIC |
| 85 | S&F in repairs vitreous china bowl urinal flat back, of size not less than 465 x 355 x 265 mm, white, with grating and union for discharge pipe complete all as specified and directed. Make:- Parryware / Cera (1st quality) / Hindware / Essco |
| 86 | S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60gms) complete all as specified and directed.Make :- Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf |
| 87 | S&F structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1998 grade St.-240 complete all as specified and directed. |
| 88 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT(total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. Make:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Bhushan Power & Steel Ltd |
| 89 | All as per Sl item No. 1.87 above but plain steel sheet. |
| 90 | S&F 30 mm thick pre-laminated medium density fibre (MDF) board flush door shutter, both side laminated of approved colour, interior grade complete all as specified and directed.Make:- Greenply Industries Ltd. / Balaji Action Buildwell / Novapan / National / Kitply |
| 91 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple, bolttype and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries |
| 92 | S&F 250 mm long mild steel sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.Make:- M/s Mowjee / M/s Crown / M/s Everite / M/s Harrison |
| 93 | M&L welded steel wire fabric square mesh supplied and fixed complete to wood or steel members, weight not exc. 4 kg per square metre complete all as specified and directed. |
| 94 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with grade of steel conforming to Fe - 410 - W (Gde E - 250) Quality - A and complete all as specified and directed. |
| 95 | S&F rolled mild steel in plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes,with riveted, bolted or welded attachment conforming to Fe-410W (Gde-E-250) quality-A complete all as specified and directed. |
| 96 | M&L RCC 1:2:4 Type B1 (20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like and complete all as specified and as directed. |
| 97 | S&F 15 mm bore fancy type, chromium plated, stop valves, concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed bothends for iron pipe or union complete all as specified and directed.Make:- M/s Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series) |
| 98 | S&F 15 mm bore stop valve of PTMT any colourhigh pressure screwed for iron pipe and fixed. (Minimum weight 90gms) complete all as specified and directed. Make:- Prayag or its equivalent in M/s Pearl Precision Products Pvt Ltd / Polytuf |
| 99 | S&F 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends foriron pipe and fixed complete all as specified and directed.Make:- Kirloskar / Leader / Zoloto / Venus / Audco / Upadhyaya |
| 100 | S&F rotational moulded polyethylene water storage tanks of 500 Litres capacity, multilayered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank complete all as specified and directed.Make of tank:- Sintex / Polycon / Oriplast / JindalMake of ball valve:- Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf |
| 101 | All as per Sl item No. 1.99 abovebut 1000 litres capacity |
| 102 | S&F 25 mm bore PTMT nipple (Minimum weight 65 gms) suitable for HDPE water tank complete all as specified and as directed. |
| 103 | S&F 20 mm bore ball valves high pressure of PTMT withepoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grams) complete all as specified and directed. Make:- Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf |
| 104 | S&F soap dish PTMT fixed to plugs with chromium plated brass screws complete all as specified and directed. Make:- Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf |
| 105 | S&F 100 mm size swivel shower rose of ABS, chromium plated with long head arm chromium plated for fixing with 15 mm pipe complete all as specified and directed. Make:- M/s Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series) |
| 106 | M&L RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in chajja complete all as specified and directed. |
| 107 | M&L cement concrete 1:2:4 type B1, (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed. |
| 108 | M&L providing precast cement concrete 1:2:4 Type B1 (using 20 mm graded stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cementmortar 1:4 complete with joints to match including necessary formwork or moulds etc. complete all as specified and as directed. |
| 109 | M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 110 | S& F 100 mm bore cast iron ‘P’ or ‘S’ trap complete all as specified and directed.. |
| 111 | M&L 1.5 mm thick and 38 mm wide aluminium dividing strips inserted in position, conform to design complete all as specified and directed. |
| 112 | S&F rolled mild steel conforming to Fe-410W (Gde-E-250) quality-A for rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. complete all as specified and directed. |
| 113 | BOQ Part-II (E/M Work) |
| 114 | M&L point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceilingwith and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch and including cutting chasing (as required) and making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed.Make of cable:-Havells / KEI / Polycab / RR Kabel Ltd. / HPLMake of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor) |
| 115 | All as per Sl. item No. 3.01 above but for one 5 / 6 Amps socket outlet point on independent board. |
| 116 | M & L concealed sub main wiring with 2 runs of 2.5 sqmm main wire along with 1 run of 2.5 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same complete all as specified and directed.NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.Make of cable:-Havells / KEI / Polycab / RR Kabel Ltd. / HPLMake of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor) |
| 117 | S&F switch pianoflush typeone way, 5 / 6 Amps, 240 voltcomplete all as specified and directed.Make :- Havells / Anchor / Legrand |
| 118 | S&F socket outlet 5 pin 5 / 6 Amps, 240 voltscomplete all as specified and directed. Make :- Havells / Anchor / Legrand |
| 119 | S&F ceiling rose, surface bakelite 65 x 50 mm three terminalcomplete all as specified and directed.Make:- Havells / Anchor / Legrand |
| 120 | S&Fangular lamp holder, PVC / Polycarbonate type with back plate for fixing of retrofit lamp 240 volt complete all as specified and as directed.Make :- Havells / Anchor / Legrand |
| 121 | S&F 9 watt LED bulb, inverter (backup) type, A19 shape with B22 base 230 Volts, battery with minimum 4 hrs backup time, frosted diffuser, suitable for surface mounting, total system lumen 900 Lm (minimum) on supply and 400 Lm (minimum) on battery, colour temperature 6500K (minimum), CRI 80 (minimum) and complete all as specified and directed.Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready IndustriesIndia Ltd. / Havells |
| 122 | S&F LED light fitting 1 x 18 / 20 watt batten type 230 Volts, 4 feet long, extruded polycarbonate housing & extruded polycarbonate diffuser, suitable for surface mounting, Lumen Efficacy 100 Lm/Watt (minimum), colour temperature 5700K (minimum), CRI 80 (minimum), IP 20,PF 0.90 (minimum), THD 20% (Maximum), with in-built electrnoic driver with APFC, in-built surge protection 2 KV (minimum) inlcuding all fixing arrangement, electrically connecting from ceiling rose to light fitting complete all as specified and directed.Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready IndustriesIndia Ltd. / Havells |
| 123 | S&F LED light fitting 1 x 9 / 10 watt, 230 Volts, 2 feet long, extruded aluminium housing & extruded polycarbonate diffuser, suitable for surface mounting, system efficacy 100 Lm/watt (minimum), colour temperature 5700K (minimum), CRI 80 (minimum), PF 0.90 (minimum), THD 10% (Maximum), with integrated high effeciency electrnoic driver with APFC, in-built surge protection 5 KV (minimum) inlcuding all fixing arrangement, electrically connecting from ceiling rose to light fitting complete all as specified and directed.Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready IndustriesIndia Ltd. / Havells |
| 124 | S&F 9 / 10 watt LED Bulk head fitting including electronic driver and SMD LED lamp, polycarbonate housing & opal polycarbonate diffuser, Lumen Efficacy 100 Lm/Watt (minimum), colour temperature 5700K (minimum), CRI 80 (minimum), IP-65, PF 0.95 (minimum), THD 10% (maximum), in-built surge protection 5 KV (minimum) including electrically connecting from celing rose to light fitting complete all as specified and directed.Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready IndustriesIndia Ltd. / Havells |
| 125 | S&F MCB DB, SPN 8 way, IP-43, IK 09, double door type with metal door, with 100A copper neutral and earth bus bar for fixing MCB fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed.Make :- L&T / Havells / Panasonic / Hager / ABB / Legrand / Indo Asian (Optipro) |
| 126 | S&F MCB SP 6 to 32 Amp, 10 kA, 240V\"C\" curve complete all as specified and as directed.Make :- L&T / Havells (Brand-Max³, EURO-II) / Panasonic / Hager / ABB / Legrand |
| 127 | All as per items No. 3.13 above but MCB SPN 40 to 63 Amp. |
| 128 | S&F exhaust fan 300 mm sweep, metal body, 1200 RPM (minimum), AC single phase, 230 V, 50Hz with bird guard, nuts, screws, bolts including electrical connection, writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole and making good the disturbed surface to match the existing surface complete all as specified and directed.Make :- Havells, Model - Ventil Air - DSP or equivalent in Orient / Ram Ratna Electricals Ltd (RRE) |
| 129 | Supply & laying LT XLPE insulated, armoured heavy duty electric cable with alumimium conductor, 1100 volts grade, cross sectional area 16 Sqmm x 4 Core, laid in trenches / duct / on pole complete all as specified and directed.Make :- Havells / KEI / Polycab |
| 130 | Supply & laying sub class \"B\" bricks of old size, laid along alignment of cable as protection to cable in trenches complete all as specified and directed. |
| 131 | S&F 40 mm bore galvanised steel tubing, light grade with necessary fittings, fixed along electric pole etc, for cable protection complete all as specified and directed.Make - Tata / Jindal Steel / Surya Roshni Ltd. /Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd |
| 132 | S&F 80 mm bore galvanised steel tubing, medium grade with necessary fittings, laid under road crossing, for cable protection complete all as specified and directed.Make - Tata / Jindal Steel / Surya Roshni Ltd. /Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd |
| 133 | Boring holes horizontally under road, manually, in soft / loose soil, without cutting / disturbing the existing road surface, suitable for inserting pipe of n exc. 80 mm bore at a depth 0.75 m to 1.0 m from road surface for passing of UG cable, getting out and disposal of soil to a distance not exceeding 50 m complete all as specified and as directed.Note:- GI Pipe shall be measured and paid separately. |
| 134 | Supply, laying testing and commissioningof LT cable XLPE insulated with FRLS loading factor on inner and outer sheath of Extruded PVC andwire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade of size 35 sqmm 4 core with including taking down old unsv ones complete all as specified and directed. Make :- Havells/ Gloster/Finolex/KEI. |
| 135 | Supply, laying testing and commissioningof LT cable XLPE insulated with FRLS loading factor on inner and outer sheath of Extruded PVC andwire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade of size 70 sqmm 4 core with including taking down old unsv ones complete all as specified and directed. Make :- Havells/ Gloster/Finolex/KEI. |
| 136 | M&L air termination, single pointed, copper rod 12 mm dia and 300 mm long with all necessary nuts, washers bolts etc. complete all as specified and directed. |
| 137 | M&L copper strip 20 x 3.15 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed. |
| 138 | M&L test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos. 8 mm dia 25 mm long hex. head screw complete all as specified and directed. |
| 139 | M&L for polymer insulators for fixing of earthing strip of size 20 x 3.15 mm thick, over roof top / Galvanium sheet / walls as directed by Engr in charge. |
| 140 | Supply and fixing of Surge Protection Device (SPD), Type- 1 & 2, with capacity to withstand impulse current with 10/350 µS wave form, 440V AC, I Imp12.5 KA, I Max 80 KA, 3 + 1 pole, 4 module complete with installation. |
| 141 | Supply and fixing ofspare cartridge for Surge Protection Device (SPD), Type- 1 & 2, with capacity to withstand impulse current with 10/350 µS wave form, 440V AC, I Imp12.5 KA, I Max 80 KA, 3 + 1 pole, 4 module complete with installation. |
| 142 | Supply and fix of isolation transformer, Three phase, 50 Hz, Copper wound, oil cooled, class of insulation B, metallic body duly powder coated designed for input Voltage range 415 (+/-) 5% and output voltage range 415 (+/-) 5%, Ratio 1:1, Vector Group: Dyn 11, Delta-star, indoortype IP 42 with first filling of transformer oil of requisite dielectric strength up to level, efficiency more than 95 %, separate neutral bushing shall be brought out for earthing, Potential difference between neutral to earth less the one volt with all standard fittings like digital temperature meter, adequate number of cooling radiators, lifting hooks one set, Earthing terminal two nos complete with over load / short circuit protection .• Output voltage - 415, 433 V in three phases• Input voltage –415, 433 V in three phasesCapacity 63 KVA complete all as specified and as directed. |
| 143 | Supply and fix of prewired DB, TPN 8 way vertical type complete with CRCA 2mm thick housing and powder coated, white, IP-42, with incomer FP isolator MCB 63A, 415 V AC outgoing DP/FP MCB as per requirements of 8 Nos per phase fully wired from start to end and terminal blocks for outgoing circuit and incoming cables complete all as specified and as directed. |
| 144 | S&F MCB DB, SPN 4 way, IP-43, IK 09, double door type with metal door, with 100A copper neutral and earth bus bar for fixing MCB for installation and housing of SPDs & making good the disturbed surfaces complete all as specified and as directed.Make :- L&T / Havells / Panasonic / Hager / ABB / Legrand / Indo Asian (Optipro) |
| 145 | S&F MCCB 4 pole 125 Amps breaking capacity 25 KA, Ics = 100% Icu including spreader link complete all as specified and directed.Make :- L&T / Havells (Brand- HIM & HIX) / Panasonic/ Hager / ABB / Legrand / Indo Asian(Optipower) |
| 146 | Supply and fixing of Digital panel meters with RoHS compliance and advance multifunctional options installed and housing inside 4 way SPN DB complete all as specified and as directed. |
| 147 | M & L concealed three phase sub main wiring with 4 runs of 4 sqmm main wire along with 1 run of 4 sqmm earth wire single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed.NOTE:- Four runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.Make of cable:-Havells / KEI / Polycab / RR Kabel Ltd. / HPLMake of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor) |
| 148 | All as per item No. 3.34 above but with 4 runs of 6 Sqmm main wire along with 1 run of 6 Sqmm earth wire. |
| 149 | M & L concealed sub main wiring with 2 runs of 2.5 sqmm main wire along with 1 run of 2.5 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces& taking down complete all as specified and directed.NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.Make of cable:-Havells / KEI / Polycab / RR Kabel Ltd. / HPLMake of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor) |
| 150 | M&L earthing complete with copper earth plate electrode of size 600 x 600 x 3.15 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to copper strip 20 x 3 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point and complete all as specified and directed.Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 40 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc. |
| 151 | Supply & Installation of Earthing system confirming to IS:3034 with advance conductive compound based chemical compound technology with upgraded high tensile low carbon steel rod as per UL 467 and as per BS 7430 with copper coating of 250 microns . The rod shall be 17.2 mm dia & 3 meter length with rod to tape clamp, CR 125 (type A) additional protection of the terminal. Chemical compound should be the highly conductive compound as per BSEN 50164-7 with 25 Kg each bag & resistivity should be 0.05 ohm meter. The job includes digging the pit and refilling the same by fursecem back filling compound (Ground Enhancer), the BFC should be eco friendly it should not contain environmentally hazardous materials / metal having mixed with 3:1 cement, a conductive concrete is formed. The earth pit should be provided with a light weight inspection pit cover PT-205 for protection and safe guard of terminals. In areas where soil conditions is bad Good earth is to be arranged to fill the excavated pits by mixing furse CEM - a convenient and permanent solution by adding with 3:1 ratio chemical compound with earth electrode is the main component of the earthing system which is direct contact with the ground and thus provides a mean of releasing or collecting earth leakage currents. The materials should have good electrical conductivity and anti corrosion property in wide range of soil conditions.Make: ABB FurseCEM as per RB336 or eqv of same technical specifications. |
| 152 | Note for above item:Each Earth Pit should contains:- (i) 1 No. copper bonded high tensile low carbon steel, 17.2 mm dia, 3 meter length(ii) Rod to tape clamp (type A)(iii) 25 Kg Chemical compound as per BESN 50164-7(iv) Light weight inspection pit cover with 500 Kg weight load Capacity. |
AI Tender Summary
Tender Timeline
Jan 29, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 18, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 26, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender