|
| 1 | Is Sieve sets (20cm Dia Brass frame sizes (mm/Micron) a) 10.00mm b) 4.75mm c) 2.36mm d) 2.00mm e) 1.18mm f) 1.00mm g) 600/uh) 425/ui) 300/u j) 150/u k) 90/u k) 75/u Pan & cover. |
| 2 | Is Soeve Sets (As per specifications of Is: 460) ss -GI frame Sieve set (size 30cm dia a) 125mm b) 106mm c) 90mm, d) 80mm e) 63mm f) 53mm g) 45mm h) 40mm i) 37.5mm j) 31.0mm k) 26.5mm l) 22.40mmm) 20mm n) 19mm o) 16mm p) 32.2mm q) 12.5mm r) 11.2mm s) 10.00mm t) 9.5mm u) 8.3mm v) 5.6mm w) 2.8mm x) 4.75mm y) 3.35mm z) 2.36mm |
| 3 | Standard Laboratory Use Medium Grade Sand: Medium sand must be supplied as per IS 650 in 25 kg bags and it must be clean and free from any organic /inorganic imourities or excess silt |
| 4 | Standard Laboratory Use Medium Grade Sand: Medium sand must be supplied as per IS 650 in 25 kg bags and it must be clean and free from any organic /inorganic imourities or excess silt |
| 5 | Standard Laboratory Use Fine Grade Sand: Medium sand must be supplied as per IS 650 in 25 kg bags and it must be clean and free from any organic /inorganic imourities or excess silt |
| 6 | FRESH CONCRETE MIXER (PAN TYPE 40 LTR CAPACITY: Equipment must be transportable on self wheels .It must be supplied with minimum mixing drum capacity of 40 litres of fresh concrete.The drum RPM at least 20 to 25 RPM is desirable mix must have provision of adjustable blades besides suitable for mixing mineral aggregate. Equipment must run by 415 v ( *5%) 50Hz Three phase AC supply or single phase supply or single phase supply of 220 V (15%) 50Hz (Equipment must be supperior make manufacture and finish complete in all respect. |
| 7 | LABORATORY CONCRETE SPECIMEN CUBE MOULDS: As per relevant is specifcations (IS 10086) : Cube Moulds for preparing concrete specifens for checking compressive strength of cement concrete of size 150mm. |
| 8 | MOTORISED SIEVE SHAKER : Equipment must consists of motorized sieve shaker for saving of ganular or bpwdered material /soils .It must accommodate up k 8 sieves of 20 cm dia .The equipment must be geated. |
| 9 | WATER BATH (REPUTTED MAKE) Water bath thermostaticously controlled or with digital controller cum indicator doubied wailed inner chamber made of non rusting satinless steel outer body of SS end |
| 10 | ELECTRIC HOT AIR OVEN (RUPUTED MAKE) : 0 Superior laboratory electric even thermostatically controlled or with Digital controller cum indicator with safety alram.It must be double walled with outer body made of MS powder coated & inner made of stainless steel |
| 11 | PRECISION ELECTORNIC /DIGITAL BALANCE with Dual power Operation (AC/Batery ) 400gm -600gm capacity with read out of at least 0.01gm reproductibility of 0.01gm (Complete & Operational in all repsects |
| 12 | PRECISION ELECTORNIC /DIGITAL BALANCE with Dual power Operation (AC/Batery ) \"Superior brand precision digital balance 5 Kg capbale of measuring atleast 1 gm to 5 kg with permissible error |
| 13 | PRECISION ELECTORNIC /DIGITAL BALANCE with Dual power Operation (AC/Batery ) \"Superior brand precision digital balance 5 Kg capbale of measuring atleast 5 gm 30 Kgwith permissible error (Complete and Operation in all respects) |
| 14 | PRECISION INFARED Therometer: Digital non conduct infared therometer (Fluke or superior make) with back light LCD Display battery powered with minimum operational temperature range of -20 Degree to 300 Degree for better display resolution of atleast 0.1 degree per F suitable spectular responsive class 2 - lazer power with display hold feature (Comlete and Operational in all respects) |
| 15 | PRECISION PROBE Therometer : Digital contact type probe therometer minimum operational temperature range 24 degree to 300 Degree or better display resolution of atleast 0.1 Degree F (Complete and operational in all respects) |
| 16 | AGGREGATE IMPACT TESTNG MACHINE.( As er specification of IS 9377) Standard aggregate impact testing machine for deterination of impact value for small size minerial aggregate /stocks (Equipment must be superior make manufacture and finish complete in all respect |
| 17 | ENAMEL EI-TRAYS: Sam purpose Enamel Tray /plates/Bucket of following minimum sizes Complete & Operational in all respects250mm x300mTray |
| 18 | 450mmx600 -Tray |
| 19 | FLAKENESS APPARATUS (SHAPE TEST) : As per specification SP -36 IS 2386 Part -I (Equipment must consists of following thickness guage manufactured from heavy guage steel with IS certification stamp (Equipment must be of good make and manufacture and finish complete & Operational in all respects |
| 20 | Elongation APPARTUS (SHAPE TEST) : As per specification SP -36 is 2386 Part -I ( Equipment must consists of following thrickness guage manufactured from heavy guage steel withIS certification stamp (Equipment must be of good make and manufacture and finish complete & Operational in all respects |
| 21 | STANDARD VICAT APPARTUS (Cement Testing) : Equipment must be approved for determination of consistency of standard cement paste and must be in conformation with IS : 5513- 1976 with following minimum specifications: 1) A stable frame with vertically moveable rod to accomodate consistency plunger and setting time needles and having a cap at the top 2) Vicat muld in the form of frustum of a cone with internal diameter of 60mm. 3 Spilt type vicat mould with clamping ring. 4) MS base plate & Class base -plate for the mould5) Intial setting the needle 6) Final setting time needle 7) Standard consistency plunger (Equipment /supply must be of superior make and manufacutre and finish complete in all respect |
| 22 | LE - CHATELIER SOUNDNESS TEST APPRATUS (CEMENT): LE -Chatelier Moulds with IS Certificstion must be suplied for determination of Countness of cement and class A and Class B time The appratus must be confirmation with IS 5514,IS 1727 IS: 2645,IS 4031,IS 6932 (Part -9 with following minimum specifications. 1) Orit Spilt Cylinder mould 30mm diax30mm high made of spring brass with two indicators arms strongly soldered on either sides of spilt 2) Two galss plates 3) One load weight approximately 100gms .(Equipment /supply must be of superior make .manufacture and finish,complete in all respects) |
| 23 | LE-Chatelier WATER BATH WITH controller : Equipment must be compatible with requirements of LS, Soundless. Test with following minimum specifications: 1) Water bath must be doubel walled made from heavy guage steelness steel sheets for maintaining of Tempature of water of 27+2 C with proper insulation provided between the walls 2) Provided with an immersion type heater,with thermostate regulator for controlling the temperture. 3) Provided with arrangments for having a removable rack to hold multiple Le Chatlier\"s moulds 4) Operational at 220v+10v single phalse 50Hz AC supply Equipment must be of superior make/Manufacure and finish Complete in all repsect) |
| 24 | SLUMP TEST APPRARTUS: As per IS Specifications IS 7320) Appartus must be complete for determination of slum of fresh concrete for measuring its conitency for aggregate size less than 38m.Appratus size slum cone,base plates & tamping road> (Equipment /supply must be of superior make/manufacure and finsh complete in all respects) |
| 25 | CEMENT MORTAR MIXER: Equipment must be provided for prepation of plastic mortar of cement and pozzalanic material for making types of test specimens in the laboratory : Equipent must be in confirmation with IS: 10890-1984,is 1727-1967,IS 4031 and must comprise of following specifcations: 1) A stainless steel maxing bowl of about 6 litre capacity,which can be held with the maxing appratus and its height adjustable.2) Stainless steel mixing paddles of standard /specifed shape and dimension which can be attached or removed easily. 3) A power /motor driven mixer which simultanously impart twomotions to mixing paddle i.e revolving and planetary .they being opposite to one another in directions. 4) A two speed gear box (low/high) to revolve paddle at approximately 140rpm + 5Rpm,and 285+10 Rpm,with corresponding planetary motion of 62+5rpm and 125+10Rpm respectively 5) All acessories like scrapper,cleaning brush etc (Equipment/supply must be of superior |
| 26 | BITUMEN BINDER CENTRIFUGE EXTRACTOR) As per relevant IS specifcations ASTM D 2172: manually operated Bitumen Binder Centrifuge extractor for bitumenious mix up to 1.5 kg capacity with hand speed control with filter paper Discs (Set of 500 sheets) Equipment /supply must be of superior make /manufacure and finish complete in all respects. |
| 27 | SOFTENING POINT APPRATUS (RING & BALL METHOD) The test appratus must be as per IS 1205 /ASTMD36 relevant specifcations for determination of softening temperture of bitumen using ring and ball method.Equipment must be have built in heating facility,magentic strirrer and temperature controller.Appratus must be operational for 220V,50Hz Single phase AC supply,(Equipment/supply must be of superior make/manufacture and finish complete in all respects |
| 28 | DUPTILITY APPRATUS (ELECTRICALLY OPERATED WITH COOLING ARRANGEMENTS): The test apparatus must be as per is: 1208/ASTMD113 relevant specifications for dtermination of ductilty of bitumen using control elongation(constant speed) by way of ductility machine.Equipment must have build in water bath with heating facility using electric pump circulator and heater.(Equipment/supply must be of superior make/manufacture and finish complete in all repects. |
| 29 | CONSISTENCY TEST APPARTUS: The test apparatus must be as per IS 2720 Part 5 IS 9259 relevant spectifiactions for dtermination of consitstency (liquid Limt) of soils by Casagrande method .The appratus must be operational with counter,with IS/BS/ASTM prooving tools,gauging block.(Equipment/supply must be of superior make/manufacture and finish complete in all respects) |
| 30 | SAND REPLACEMENT FIELD DENSITY APPARATUS: Small) The test appartus must be as per IS 2720 (Part 28) with followwing parts: 1) Sand pouring cylinder fitted with conical funnel and shutter,capacity 3 Ltr .(1 No) 2) Cylindrical caliberations container 100mm ID x 150mm height (1 No) 3) Metal tray size 30x30x4cm with 10cm central hole (1 No) Equipment /supply must be of superior make/manfufacture and finish complete in all respects) |
| 31 | LOS ANGELES ABRASION TESTING machine WITH ABRASIVE CHARGE : IS STANDARD IS 10070,to dtermine the resistance to wear off small size coarse aggregate and crushed rocks detachable shelf,drum rotation of 30-33 rpm with electric motor and heavy duty reduction gear .Supplied with tray for collection of material,operational sutibality 415V,3 phase,50Hz ,AC supply.Abrasive charge set of 12 hardened 48mm dia ditgital controller box. (Equipment /supply must be of superior make/manufacture and finish complete in all respects) |
| 32 | Universal Penetrometer with penatration cone and bitumen penetration KIT IS 1448 Part 60 ASTM:D937,IP: 179,BS : 4698 ASTM: D 217,IP: 50 ISO: 2137,EN: 1426,13179-2 Equipment must of following replicable parts. A) Universal penetrometer with adjustable head and display (01 No) b) Penetration cone for dterimnation of consistency of lubricating grease and oils ( 1 No) c) Bitumen penetration kit constisting of penetration needle copper transfer dish ,aluminum container ( 1 No) d) Penetration test cone for soils with cups (1 No) (Equipment/supply must be of superior make/manufacture and finish complete in all respect) |
| 33 | Cleveland Flash (Open ) & fire Point Apparatus.(As per specifications of IS 1448,P:69,IS 73-2013)Equipments mustbe capable for determining flash & fire pint bitumen .The flash cup must be made of brass with insulated handle .Equipment must have metal heating plate electrically operated with energy regulator and gas jet assembly.Complete in all respects with all optional acessories. |
| 34 | ABSOLUTE (DYNAMIC & KINEMATIC VISCOSITY APPARTUS. As per IS specifcation 1206 Part -II & Part - III,IS : 73-2013.Equipment must comprise of following : a) 2 No imported viscometer tube (cannon - Manning vaccume viscometer) made of borosilcate glass with size No 12 (IS : 1206 part -II ) Determination of absulte viscocity in the range of 300 -8000 poise at 60 C along with calibration certificate .b ) 2 No imported vocometer glass with size No 350 (IS : 1206 part - II) for deterimnation of Kinematic viscoscity in the range of 30-500 cst AT 135 C alongwithcalibration calibration certifcate c) No Oil free vaccum application system with 4 lines with vaccum range upto 300mm of Hg and least measurable and maintainable level of +0.5mm of Hg d) 3 No mercury in glass tube type thermometre with range of 0 C to 150 C,scale +02 C (as per IS 1206-part -II) e) 1 No Visometer sillicon bath, with uniform temperture controller with accuracy of + 1 C,for conduction of absolute and kinematic visosity test on bitumenous and cut bag materials by vaccum capilary method at specified temperture (Complete & in all respects) |
| 35 | Pavement depth /thickness guage .MS Thickness Guage with minimum gauging depth 150mm (Complete & Operational in all respect |
| 36 | SOIL HYDROMETER : As per IS specifications /SP-36,IS : 2720 (Part -4) ,IS: 3014 (for soils/fines with >10% passing 75micron SIEVE ) Soil Hydrometer made of superior clear \transperant glass of uniform clarity throughout free upper denisty scale range must be 0.995 to 1.30 g/cc(g/ml) at 27 C with least count of 0.0005 g/cc(g/ml) there shall be no abrupt changes in the x section of the hydrometre,such as will hinder cleaning or permit air bubbles to be trapped the hydrometre shall have maximum perissible scale of plus/Minus one scale division .( (Complete & Operational in all respect ) |
| 37 | SOIL PYCNOMETER (As per reference standard IS :2386 for dterimination of specifc gravity of clays, sands and gravals of grain soil less than 10mm ) Equipments must consist of 1 Kg / 1 Litr Superior glass bottles,with bored brass cone stopper,with locking ring and rubble seal ( Complete and Operational in all respects) |
| 38 | Density Bottles as per reference standard IS : 2720 Part -I .It must consist of following capacity Superior lab,Glass bottles with cappillary vent, leak proof stopper 25ML |
| 39 | 50ML |
| 40 | 100ML |
| 41 | Table Mounted Marshall\"s Stablity Apparatus : ( As per IS ASTM D -1559,D -6927 Specifcations) Equipment must consist of Marshalls stability loading frame 50 Kn capacity ( with proving ring),single speed with platen speed 50.8 per minute (Precise speed ) suitable to operate on 220V,50Hz single phase AC supply,limit switch protection for both upward and downward travel .Following must be supplied with the apparatus. a) Marshalls steel compaction hammer,weight 4.5 kg with a free fall of 457mm ) 02) No) b) Compaction moulds (10.16cm dia and 7.6m height ,for 25.4mm maximum nominal aggregate size) of steel clylindrical, with individual extension collar and base plates (6 Nos ) c) Hydraulic sample eject (01 No ) d) Sample breaking head with load transfer bar and flow measurement arrangement using dial guage e) Compaction pedestal comprising of steel plate capped wooden post Equipment must be of good make /manufacutre and finish complete & Operational in all respects |
| 42 | Hyderaulic ;oading Appratus for tests ( 2000 Kn): for conductionof pile load test as per specification SP_36,IS: 1888, IS: 3014. Equipment must include hydraulic jack 2000 Kn (200 MT) , capacity alongwith Calibrated 2000 Kn (200 MT) , 1000kn (100MT) & 500 kn (50MT) capacity presure guage with suitable least count. Equipment muist include heavyduty hand operated remote hydraulic oil pumping unit. High pressure flexible pipe( at least 5m) . The hydraulic jack must be provided with a postion travel / stock of at least 150 mm or higher. The supply shall include 4 No.0.01-50mm working range. (Equipment/ supply must be of superior make / manufacture and finish complete in all respects. |
| 43 | ANALOG ELECTRICALLY OPERATED CTM : 1000kN Compression Testing Machine conforming to IS:14858 with +1% accuracy .Loading range 1000 KN (1000 KN (100T) with LC 5 Kn maximum clearnce between platens : 390mm maximum clearance between platens: 260mm planten size : 222mm dia .Planten hardness : 612HV(55HRC , piston dia : 157mm ,piston stroke : 50mm .Motor HP : 1 HP, Motor make standard /Approved make .Power requirements : 220V /230V, 1 phase ,5HZ ,AC supply ,Specimen size : 100mm,150mm cube ,100mm and 150mm dia cylinder . Standard : IS : 516 and IS : 14858.Pumping unit to be electrically operated unique features are : a) Calibration within 1% of full sclae deflection with traceablity of NABL .b) Powder coating finishing surface . c) Front gate for protection . d) Pump with brass casing .The complete unit comprises of : a) Loading Unit : is of fully welded construction having a cross head with a sperical seated platen .The lower platen is attached to the top of piston cubes upto 300mm and cylinder upto 300mm dia x 300mm height can be tasted using approximate modles . b) Continous voltage transformer ( CVT) with NABL calibrations. Equipment \supply must be of superior make /manufacture and finishcomplete in all respects |
| 44 | Califomia Bearing Ratio Appratus ( As per Specifications of IS : 9669,IS : 2720-XVI,etc ) Specification of CBR Moulds.The material for construction of the various equipment shall be as given in above standard .Mould: the Mould dia shall be 150mm Collor: the collor shall be made from same material as that of mould .two similar ears as in the case of the mould shall be cast integral with the body or welded Base plate : A suitable seating about 2mm deep shall be provided on the top face for proper seating of the mould Equipment must be of superior make /manfacture and finish Complete in all respect |
| 45 | SOIL COPACTION APPRATUS : As per specification /Ref standard of IS : 10074(part VII ) , IS 2720 (Part-VII), IS : 9198 .Equipment must consist of following for performing tests to dtermine denisty moisture rleations for soils a) Standard compaction Appratus ( Light compation /standard Proctor ) consisting of 1000 ml volume gun metal mould ,100mm dia (ID),127.3mm height b) Base plate & collar c) Hammer of 2.6 Kgs with 310mm fall Equipment must be of superior make /manfacture and finish Complete in all respect |
| 46 | Soil Compaction appratus ( Modified ) ( As per IS : 2720 (Part 8) ,IS : 9198 IS : 10074 Modified compaction mould in mild steel heavy compaction face /end with base plate and colour Equipment must be of superior make /manfacture and finish Complete in all respect |
| 47 | DYNAMIC CONE PENTROMETER FOR IN CBR .( AS PER ASTM D6951) Dynamic Cone penetrometer (DCP) is used for rapid in situ measurement of the structural properties of existing road pavement constructed with unbound materials .The Unit incorporates an 8 kg weight dropping mass trough a height of 575 mm .Avil with driving rod. Penetration road with 60 ,20mm dia cone.Spanners, Tommy bar,Bottle of adhesive .All contained in a carrying case .Case dimensions (1200x350x200mm approx) weight approx 30 kg |
| 48 | Cement Mortar Cube Moulds Cube Mould of 70.6mm size conforming To IS 10086-1982 Supply must be of superiormake /manfacture and finish Complete in all respect |
| 49 | Compaction factor Appratus )AS per IS : 5515) The Appratus shall consist of two conical hppers mounted above a cylindrical receiver .The hoppers shall be of rigid construction true to shape and finished smooth inside .They shall be made of cast brass conforming to IS : 210-1975.Brass sheet atleast 3mm thick ( Reciver -the cylindrical reciver shall be of rigid construction ,true to shape and finished smooth inside .It shall be made of cast brass or cast iron .The top edge shall be accurately machined normal to the cylinder axis.Frame -The fram shall be of rigid construction .welded or riveted rolled structural sections would be suitable .Acessories :- The Appratus shall also include two ordinary trowels having a steel blade of 200m in lenght with straight edge, a hand scoop about 150mm long, a 16mm diameter and 600mm long steel tamping bar with a rounded working end and scales ( or a balance ) to weight up to 25 kg to the nearest 10 g Equipment must be of superior make /manufacture and finishcomplete in all respects |
| 50 | Buoyancy Balance The buoyancy Balance consists of a rigid support frame incorporating a water link mounted on a platform .A mechanical lifting device is used to raise the water Tank through the frame height immersing the specimen suspended below the balance .The model operates with an electronic top pan programmed balance of 15 Kg capacity readable to 0.5 g The support frame comprises a welded steel frame on top of which is mounted the top loading flat pan balance .A Cantilever platform to support the immersion tank is elevated by a chain attached to it and operated by a manually operated ratchet lifting gear, to allow the test specimen to be weighed in air and weighed in water using the same balance. |
| 51 | Laboratory Electric Hot plates: Equipment must comprise of following minimum specification 1 SS/MS Top with size of 450mmx600mmx150mm (with dimension allowance of +10mm)2. Thermostat control and regulator. 3 Energy consumption up to 2.0 KW operational of 220v +10v,single phase,50Hz AC (Equipment must be of superiormake /manfacture and finish Complete in all respect |
| 52 | Automatic controlled single phase stablizer (10KVA).A per IS specification IS 9815. Equipment must be an indoor floor mounted single phase automatic (copper wound) I/P range 90V to 300V,single phase, O/P of 230+4% frequency 50-60Hz,Air colled construction with U/V,O/V,O/L protection system equipment must have working temperture range - 5 C to 550 C,95% RH with proper insulation resistance, including necessary supply of quality oil.(Equipment must be of superiormake /manfacture and finish Complete in all respect ) |
| 53 | Miscellaneous itemsa) Superior quality borosilicate bottles of 50ml capacity with capillary bored glass stopper for determination of specific gravity of soil/bitumen /powders etc. |
| 54 | Heat Resistance safety gloves of sperior quality |
| 55 | Natural high grade pigmented heavy duty latex hand gloves of medium size |
| 56 | Laboratory apron of superior make |
| 57 | Medium size SS scoops /Trowels |
| 58 | Superior quality and make Heavy duty LED flash light with chargeable battery |
| 59 | Superior Quality Masks |
| 60 | Knife /Spatula |
| 61 | Trichloroethylene |
| 62 | Glass Beaker 1 Ltr Capacity |
| 63 | General Tool Box |
| 64 | SS Container ( 1 Litre ) With lids |
| 65 | Disposable aluminum foil Container with lids |
| 66 | Traffic diversion cones (Delinators |
