Construction Of Seed Processing Center
Tender Value
2.10 Lakhs
Estimated cost
Bid Submission
03 Feb 2022
0 days left
EMD
2103
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
arani → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Seed Processing Center
BOQ
| Sl. No. | Item Description |
| 1 | Item No.1:-Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Additional Spec.No.Bd.A.1 Page Number 259 (SSR 2021-22 It.No.21.02) |
| 2 | Item No.2:-Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Additional Spec. No.As directed by Engineer in charge. (SSR 2021-22 It.No.21.40) |
| 3 | Item No.3:-Providing and laying Cast in situ/ReadyMixcementconcreteinM-10oftrap/granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec. No. Bd. E. 1 Page Number 287 (SSR 2021-22 It.No.24.01) |
| 4 | Item No.4:-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. Additional Spec.No.Bd.G. 1 Page Number 313 (SSR 2021-22 It.No.27.01) |
| 5 | Item No.5:-Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Additional Spec. No.Bd.A.11 Page Number 263 (SSR 2021-22 It.No.21.37) |
| 6 | Item No.6:-Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering willnotbeallowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec. No.Bd.E.4 Page Number 289 and B- 7, Page Number38 (SSR 2021-22 It.No.24.10) |
| 7 | Item No.7:-Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete Additional Spec. No.Bd.L.4 Page Number 368 (SSR 2021-22 It.No32.06) |
| 8 | Item No.8:-Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) Additional Spec. No.BD-T-55 Page Number 510 (SSR 2021-22 It.No.39.24) |
| 9 | Item No.9:-Providing and laying Rough Shahabad Stone Flooring 25mm to 30mm thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete. Additional Spec. No.Bd.M.1 Page Number 379 (SSR2021-22 It.No. 33.01) |
| 10 | Item No.10:-Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item Number 15 to 18 prior approval of Superintending Engineer will be necessary Additional Spec. No.As directed by Engineer in charge. (SSR 2021-22 It.No.35.26) |
| 11 | Item No.11:-Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre) Additional Spec No.As directed by Engineer in charge. (SSR 2021-22 It.No.38.34) |
| 12 | Item No.12: Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. Additional Spec. No.Bd.C.2 Page Number 275 (SSR 2021-22 It.No.23.01) |
| 13 | Item No.13: Charges for testing of material in vigilance and quality control laboratory for Concrete Compressive Strength of C.C. Cube (Set of 3 cubes) Rate as per SSR 2021-22 Page No. 426 |
| 14 | Item No.14: Royalty charges a) Sand= Royalty + Surcharge (2%) + Disst. Mineral foundation cess (10%) As per SSR 2021-22 Page No. 5 Section V |
| 15 | Item No.15: Royalty charges b) for all other minerals Except sand= Royalty + Surcharge (2%) + Disst. Mineral foundation cess (10%) As per SSR 2021-22 Page No.5 Section V |
AI Tender Summary
Tender Timeline
Jan 28, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 03, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 05, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender