Repairing Of Desk Cum Bench, Chair, Table Or New Supply Of Student Desk Cum Bench, Chair, Table, And Minor Repairing Work Of Class Room, Toilet, Mdm Kitchen And Drinking Water Facility And Cleaning Of School Building Etc Complete At Tutikata Harma
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Feb 2022
0 days left
EMD
1133
Bank guarantee accepted
Document Fee
50
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
North Dinajpur → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairing Of Desk Cum Bench, Chair, Table Or New Supply Of Student Desk Cum Bench, Chair, Table, And Minor Repairing Work Of Class Room, Toilet, Mdm Kitchen And Drinking Water Facility And Cleaning Of School Building Etc Complete At Tutikata Harma Ad
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fitting fixing of wooden arms less Chair 20\"X20\" seating area of 1\" plank and pair made with 2\"X2\" pair and 2\"X1\" battan and back rest made with 3\"X1\" Battan with Design and 2\"X1\" 2 Nos. Battan, Chair Pair tied with 2\"X1\" Battan of 3 Nos. including all fitting fixing and othr incidental chages etc complete including copal varnish. |
| 2 | Supply and fitting fixing of wooden Table 3\"X2\"6\" of Hight 3\"3\" pair made with 3\"X3\" Pair and top made with 1\" planck and 3\"X1\" . including all fitting fixing and othr incidental chages etc complete including copal varnish. |
| 3 | Supply of Desk cum Bench for two Nos. Student made with Square pipe 1\"X1\", 16 mm Ply wood and 1 mm Lamination board including edging covering having length 1.00 Meter and wide 1.000 Meter Desk Having Back Seat Rest of 1\" Wide, Seat having 14\" wide, Top of the Desk having 14\" wide and Lugeg rack will be 12\" wide for holding of student Bas and other utensile are caried by student for educational purpose including Painting with ready mixed Black Japan. |
| 4 | Supply of Labour of Carpenter (Head) for fitting fixing Verious Table Bench etc. |
| 5 | Supply of Labour of Carpenter (Helper) for fitting fixing Verious Table Bench etc. |
| 6 | Supplying, fitting, fixing bolts with nuts, washer:(i) 10 to 16 mm dia: (a) Length up to 75 mm |
| 7 | Rough dressed timber planks fitted and fixed with nut bolts excluding framework complete :In ground floor(i) 25mm thick planks(b) Sal Local |
| 8 | (B) Dressed wood work in post , plate , battens . etc. fitted & fixed complete (excluding the cost of bolts only, but including the cost of nails, screws etc.)(The quantum should be corrected upto three decimals)(ii) Sal : Local. |
| 9 | (A) Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.)(The quantum should be corrected upto three decimals)(ii) Sal : Local. |
| 10 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 11 | Asbestos corrugated (Trafford or similar approved quality) sheet (6 mm thick) work (excluding the supporting framework) fitted and fixed with 9.5mm. dia. J or L hook-bolt and nuts, limpet and bitumen washers and putty with 150 mm end lap & one corrugation minimum side lap complete. (Payment should be made on area of finished work)(a) In Roof |
| 12 | Wiring in 1.1 KV grade single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc.(b) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) |
| 13 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe (for horizontal & vertical run in wall and celing portion through prelaid polythen pipe) complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish(a) 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC(i) Average run 6 mtr |
| 14 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 15 | Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.(b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only] |
| 16 | (viii) M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. flats and bars. |
| 17 | M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge.In ground floor. |
| 18 | Locking arrangement for Jail type doors including supplying fitting and fixing in position complete as per approved design. |
| 19 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:4 cement mortar(c) 15 mm thick plaster |
| 20 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:4 cement mortar(c) 20 mm thick plaster |
| 21 | Dry Distemparing to interior walls or ceiling including cleaning, washing, smoothening surface |
| 22 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :b) On steel or other metal surface :With super gloss (hi-gloss) -(iv) Two coats (with any shade except white) |
| 23 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 24 | Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof |
| 25 | Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) from roof or wall after unscrewing bolts, nuts, screws etc.and stacking the material at site as directed.(Payment to be made on measurement of portion of roof or wall removed.) |
| 26 | Labour for Chipping of concrete surface before taking up Plastering work. |
| 27 | Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately)(a) Upto area 2.5 Sq.m |
| 28 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m. |
| 29 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer\"s specification.In Ground floor:(iii) Two coats. |
| 30 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor.3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).Using grey cement(i) 20 mm. thick |
| 31 | (I) Cement concrete with graded stone ballast (40 mm size excluding shuttering)In ground floor (A) [Pakur Variety](a) 1:3:6 proportion |
| 32 | Supply of Labour of Mazdoor (Male) forshifting of verious Materials of School. |
| 33 | Supply of Labour of Methor Mistry for cleaning and shifting of verious Materials of School. |
| 34 | Supplying, fitting and fixing bib cock or stop cock.(f) (i) Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO / ATLAS or equivalent) 15 mm |
| 35 | Supply, Fitting & Fixing of 32 mm PVC Waste Nozzle with jamnut, full thread or half thread complete. |
| 36 | Opening out leaky water supply pipe and making the joints water tight including cutting threads where |
| 37 | Dismantling and refixing bib cock or stop cock.(i) 15 mm |
| 38 | Rewashering stop cock/ bib cock/ push cock/ pillar cock including gland(i) 15 mm |
| 39 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding \"P\" or \"S\" trap (excluding cost of concrete for fixing).(i) 580 mm X 440 mm |
| 40 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.(ii) 470 mm X 280 mm X 340 mm |
| 41 | Dismantling Orissa pattern W.C. including taking out of base concrete, if necessary, complete. |
| 42 | Dismantling urinal. |
| 43 | Cleaning rubbish, sludge, weeds scum, liquid earth, mud etc.etc.from road side masonary drain/ hume pipe drain/ culvert etc. by mathor labour after removing concrete.Slab/manhole cover etc.without damaging the same and refixing the same properly after cleaning as necessary and removing the sludge etc.etc.by using iron pans,buckets including all labour, tools & plants including removing the spoils in dry condition and disposing the same by truck beyond the road side in conformity with municipal/corporation rules for such disposal including loading into truck and cleaning the road side in all respects as per direction of the Engineerin-Charge.(Payment will be made on the basis of actual stack measurment of spoils in dry condition at roadside) |
| 44 | Cleaning glazed tiles with acid |
| 45 | Supplying, fitting and fixing Foot rest for water closet of size 275 mm X 125 mm with (b) Porcelain of approved make. |
| 46 | Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).(i) 450 mm X 350 mm |
| 47 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed Work PVC Pipes(Dia)15 mm |
| 48 | Do(ii) 20mm dia. |
| 49 | Do (iii) 25 mm dia. |
| 50 | Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge.In ground floor. |
| 51 | Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm Prelaminated PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer?s specification and direction of Engineer-in-Charge. |
| 52 | Supply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985 (Dia) [PE - 63]A. 6 Kg / Sq.Cm. (Working Pressure)(Dia) 40 mm |
| 53 | Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications.(i) 40 mm dia. |
| 54 | Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.(i) 40 mm dia. |
| 55 | Supplying, fitting and fixing popular Maya pump no-6 or similar.(i) For 40 mm dia. tube well |
| 56 | Supply of G. I. pipes of TATA make including necessary sockets(e) 40 mm dia.(i) Light quality |
| 57 | (a) Original WorksLabour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.(a) For depth upto 150 metre. (i) 40 mm dia. boring etc. |
| 58 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc.fitted and fixed with necessary screws and lugs in ground floor. (ii) Grill weighing above 16 Kg./sq.mtr and above |
AI Tender Summary
Tender Timeline
Jan 27, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 05, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 07, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender