|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group A. (1.10.1) |
| 2 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulatedcopper conductor, single core cable in surface / recessed medium class PVC conduit as required - 2x1.5 sq.mm + 1x1.5 sq.mm earth wire. (1.14.1) |
| 3 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required - 2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. (1.14.2) |
| 4 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required - 2 X 4 sq. mm + 1 X 4 sq. mm earth wire. (1.14.3) |
| 5 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required - 4 X 4 sq. mm + 2 X 4 sq. mm earth wire. (1.14.8) |
| 6 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in theexisting surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm. (1.17.3) |
| 7 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in theexisting surface / recessed steel / PVC conduit as required. 6 x 1.5 sq. mm. (1.17.6) |
| 8 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in theexisting surface / recessed steel/ PVC conduit as required. 3 x 2.5 sq. mm. (1.17.12) |
| 9 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in theexisting surface / recessed steel/ PVC conduit as required.6 x 4 sq. mm. (1.17.24) |
| 10 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in theexisting surface / recessed steel/ PVC conduit as required.5 x 4 sq. mm. (1.17.23) |
| 11 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in theexisting surface / recessed steel / PVC conduit as required .5 x 6 sq. mm. (1.17.32) |
| 12 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm. (1.21.2) |
| 13 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 32 mm. (1.21.3) |
| 14 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole. (2.10.1) |
| 15 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole. (2.10.4) |
| 16 | Wiring plug point along with wiring of light point including supply fixing 5A flush type modular switch and 3 pin plug socket in combined position.(Combined Plug). (od224344/2019_2020) |
| 17 | supplying and providing following size of electrical grade rubber mat to site location. 1000 mm X 2000 mm X 12 mm. etc completed. (od224345/2019_2020) |
| 18 | Earthing with G.I. earth pipe 2.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required (Dimension of pit should be minimum of 2.5m *0.6m * 0.6m). (od224346/2019_2020) |
| 19 | Supplying and installation of 20W 4 Ft. LED Tube set .including connections etc completed. (od224347/ 2019_ 2020) |
| 20 | Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing asrequired. (5.17) |
| 21 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator6way, Double door. (2.3.1) |
| 22 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps. (2.12.1) |
| 23 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps. (2.14.1) |
| 24 | Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required - 8 way (8+24) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43). (90.11.1.20) |
| 25 | Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 16 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL. (90.14.10.3) |
| 26 | Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearestsize. (90.12.10.2) |
| 27 | Re filling the existing cable trench making at ground level in good condition. (od147505/2021_2022) |
| 28 | Supplying 95 sqmm 3.5 core PVC/XLPE insulated armoured cable with aluminium conductors for workingvoltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE. (od225319/2019_2020) |
| 29 | Supplying 25 sqmm 3.5 core PVC/XLPE insulated armoured cable with aluminium conductors for workingvoltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE. (od150889/2021_2022) |
| 30 | Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X50 cm at the top with a thickness of 10cm including inscription duly engraved as required. (7.9) |
| 31 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade offollowing size in the existing RCC/ HUME/ METAL pipe as required.Above 35 sq. mm and upto 95 sq. mm. (7.5.2) |
| 32 | Supplying and making end termination with brass compression gland and aluminium lugs for followingsize of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade asrequired. 3 1/2X 95 sq. mm (45mm). (9.1.24) |
| 33 | Supplying and making end termination with brass compression gland and aluminium lugs for followingsize of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X25 sq.mm (28mm). (9.1.20) |
| 34 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KVgrade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle). (7.7.1) |
| 35 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KVgrade of following size on wall surface as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25 x 3mm MS flat clamp). (7.7.2) |
| 36 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modularplate as required. (1.26) |
| 37 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. (2.11) |
| 38 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden blockincluding connection etc as required. (1.33) |
| 39 | Supplying and fixing PVC batten/ angle holder including connection etc. as required. (1.58) |
| 40 | Supplying 50 mm dia. G.I. pipe (medium class). (od231364/2019_2020) |
| 41 | Providing and fixing 10 SWG copper wire on surface or in recess for loop earthing
as required. (od231365/ 2019_2020) |
| 42 | Fabricating , supplying, conveying and installation of angle iron frame work for wall mounting suitable metal board using CR sheet for fixing starters. The board shall be painted 2 coats of enamelled paint over one coats of metal primer consisting the following starters fixing in the board and giving connections and earthing etc complete.1)Electronic soft starter for 10 HP Motor. 1 No. 2)Pump controller for single phase 1.5 HP Submersible motor pumps(DOL) with Ammeter DP MCB etc 2 Nos. 3) Pump controller for single phase 1 HP submersible motor pumps(DOL) with ammeter DP MCB etc.2 Nos. 4)Pump controller for three phase 5 to 7.5 HP Submersible pumps(DOL type) with ammeter DP MCCB etc.1 No. (od233172/2019_2020) |
| 43 | S & F Motor starters of the following ratingsThree phase DOL starters for 0.25HP to 7.5 HP motor. (90.14.28.2) |
| 44 | Supply of superior quality copper earth socket for the following size of earth conductor including crimpingetc. as required.4.00 mm (8 SWG). (90.16.5.4) |
| 45 | Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required . 3.15mm (10SWG). (90.16.5.3) |
| 46 | Supplying and making outdoor cable end termination with heat shrinkable joining kit complete with all accessories including lugs suitable for size of 3.5 core x 95 sq.mm XLPE aluminium conductor cable etc complete. (od234484/2019_2020) |
| 47 | Fabricating ,supplying and installing 3 nos 200A Kit kat fuse.and neutral link using 450mmx300mm metal board (using 16swg CRCA sheet and 2 coats enamelled paint).on LT post using suitable size clamp,nut and bolts etc complete.(Including jumper cable connection OH Line to fuse unit). (od235556/2019_2020) |
| 48 | Dismantling the damaged VDB and angle iron frame for fixing existing starters .The dismantled material return to the Electrical store. (od236078/2019_2020) |
| 49 | Supplying 10W LED Bulkhead light Fitting. (od236079/ 2019_2020) |
| 50 | Erection of wall bracket / ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required. (1.35) |
| 51 | Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required. (5.20) |
| 52 | MCCB AccessoriesSupply and fixing shunt release for all voltage range up to 630A. (90.14.11.12) |
| 53 | MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 250A. (90.14.11.13) |
| 54 | Supplying and fixing SMC box (syntex) nearest size of (250mm*200mm*100mm) on existing concrete foundation with MCB channel. on existing concrete foundation. (od239048/2019_2020) |
| 55 | Supplying and fixing Earth fault relay up to 100A with CB CT in the existing syntax box.Including making connections inthe CT and MCCB .complete. (od239112/ 2019_2020) |
| 56 | Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.
Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame). (90.14.1.1) |
| 57 | Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. includingrequired nut & bolt etc.. (90.14.2.1) |
| 58 | Supply and providing heavy duty \"A\" section neoprene gasket in the panel boardA\" section neoprene beeding suitable for 1.60/ 2.00 mm sheet. (90.14.3.1) |
| 59 | Supply and providing heavy duty \"A\" section neoprene gasket in the panel boardU\" section rubber beedingsuitable for 1.60/ 2.00 mm sheet. (90.14.3.2) |
| 60 | Supply and providing copper earth bus in the panel board. (90.14.7) |
| 61 | Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and givingconnection as required3.15 mm copper conductor ( 10 SWG). (90.16.1.3) |
| 62 | Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and givingconnection as required4.00 mm copper conductor ( 8 SWG). (90.16.1.4) |
| 63 | Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board. (90.14.5) |
| 64 | Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required. (90.14.6) |
| 65 | Providing shunt release (Existing MCCBs) for all voltage ranges up to 630 A MCCB. (od147927/2021_2022) |
| 66 | Supply and Installing the following accessories to existing Fabricated MCCB panel Board 1) 1 no LCD display 3 phase 4 wire Kwh panel mount meter with Suitable CT ratings 2) 1 no Multifunction meter to read V, A, F, PF 3) 3 Nos R Y B Led indication Lamp with toggle switch including connection etc completed. (od147938/ 2021_2022) |
| 67 | Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 25/35 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL. (90.14.10.4) |
| 68 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic releaseand terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required125 Amp, 36 KA. (2.2.14) |
