Proposed Construction Of Toilet Block ( 6 Seated ) At 100Feet Road In Div-132, Unit-31, Zone-10 Proposed Construction Of Toilet Block ( 6 Seated ) At 100Feet Road In Div-132, Unit-31, Zone-10
Tender Value
20.57 Lakhs
Estimated cost
Bid Submission
10 Feb 2022
0 days left
EMD
21000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kodambakkam → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Proposed Construction Of Toilet Block ( 6 Seated ) At 100Feet Road In Div-132, Unit-31, Zone-10 Proposed Construction Of Toilet Block ( 6 Seated ) At 100Feet Road In Div-132, Unit-31, Zone-10
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in all kinds soils in varying depths including dismantling any masonry roots met within foundation and shoring with planks, baling water if necessary |
| 2 | Supplying clean Crushed Stone Sand (Commercially called M-Sand) Sand sand and filling in regular layers of 15cm thick each including watering |
| 3 | Plain Cement concrete work 1:4:8 (1 cement, 4 Crushed Stone Sand (Commercially called M-Sand) and 8 blue granite broken stone jelly 40mm gauge) including consolidation curing, |
| 4 | Supplying and filling with earth up to 20 Km. for foundation and basement,etc.,including watering and consolidating,etc.,complete |
| 5 | Supplying and erecting shuttering including necessary supports for plane surface in foundation and basement for RCC column footings,pintol blocks, plinth beam, staircase steps, critical steps, critical piers,etc.,using mild steel sheets of size 90x60cm and 10 gauge stiffened with welded mild steel angles of size25x25x3mm for boarding laid over silver Oak (country wood) joists of size 10x6.5cm spaced at about 90cm centre to centre and supported by sq.m. 730.71 730.71 730.71 casuarina props of 10 to 13cm dia spaced at 75cm centre to centre etc.,complete |
| 6 | Supplying and erecting centering for sides and soffits including supports and structting upto 3m high for plane surfaces such asRCC coloumns,top and bottom slabs of boxing. sill labs,sun shades,etc.,with necessary facia using mild steel sheets ofsize 90x60cm and 10 gauge stiffened with welded mild steel angles of size 25x25x3mm for boarding laid over silverOak (country wood) joists of size 10x6.5cm spaced at about 90cmcentre to centre and supported by casuarina props of 10 to 13cm dia spaced at 75cm centre to centre etc.,complete |
| 7 | Supplying and erecting centering for sides and soffits including supports and strutting upto 3m high for plane surface such as RCCslab, rectangular beams,\"TEE\" or \"L\" beams,lintels,bedblocks,staircase waists and landing slabs, landing beams ,canopy, etc.,with all cross bracings using mild steel sheets of a size 90x60cmx3.175mm and 10 gauge |
| 8 | Providing and laying in position ,Standardised Concrete Mix M-25 Grade in accordance with IS :456-2000,using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kg/m3 and m,aximum water cement ration of 0.50, including admixture (Plasticiser/Superplasticier) in recommended proportions as per IS:9103 to accelerate ,retard setting of concrete,improve workability without impairing strength and durability with about (5.0 cum) 7730 kg of 20 mm machine crushed stone jelly and with about (3.3 cum) 5156 kg of 10-12mm machine crushed stone 1cu.m 7729.00 7569.00 7382.00 jelly and with about (4.79 cum) 7670 kg of sand, nut excluding cost of reinforcement grill and fabricating charges,centering and shuttering and also including laying,vibrating with mechanical vibrators,finishing,curing,etc and providing complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standrands.(No separate payment will be made by the Department for the |
| 9 | Supplying and fabricating STEEL rods including cutting, bending hooks, cranking, fabricating, assembling and laying in exact position,typing with soft steel wire 16 gauge ,etc., complete conforming to BIS std. |
| 10 | Brick work with bricks (9\"x4 3/8\" x 2 3/4\") second class chamber burnt G.M. in C.M.1:6 ( 1 cement and 6 Crushed Stone Sand (Commercially called M-Sand)) including curing,) |
| 11 | Brick work in second class bricks (9\"x4 3/8\" x 2 3/4\") in C.M.1:4 ( 1 cement and 4 Crushed Stone Sand (Commercially called M-Sand)) including curing,etc.,complete for 23cm thick walls upto basement (upto 1m high above G.L.) |
| 12 | Extra Labour for 11cm thick walls. |
| 13 | Plastering with cement mortar 1:3 (1cement and 3 Crushed Stone Sand (Commercially called M-Sand)) 10mmthick including hacking, curing,etc., complete for ceiling andother exposed RCC surfaces. |
| 14 | Plastering with cement mortar 1:4 (1 cement and 4 P sand)12mm thick including curing, etc., complete |
| 15 | Painting two coats with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping,clean removal of dirt,etc.,complete and including sq.m. 203.98 203.98 203.98 necessary plaster of parris,putty wherever required and neat finishing etc.(ISI STD) |
| 16 | Supplying and fixing WALL TILES colours designed glazed tiles 300x200x6mm in C.M. 1:3, 20mm thick and pointing with same colour |
| 17 | Paving the flooring with first quality plain CERAMIC TILES of all colours of size 305mmx305mmx6mm set in C.M.1:3,12mm thick including pointing with white cement,labour,materials,etc., (ISI.std) |
| 18 | Paving the flooring with CEMENT CONCRETE TILES hydraulic pressed Antiskid tiles as per pattern design 20mm thick in cm 1:3 including pointing with colour cement etc., complete.(ISI |
| 19 | Supplying and fixing of M.S.Grills forWindows/Verandah/Ventilators Grill of standard rectangular design using 25mmx10mm M.S.Flats for outer frame and 20mmx5mm M.S.Flatsfor inner frame and for inner grill portion.The Vertical grillspacing should be 9.6cm. The centre portion spacing in between twogrills should be 14.5cm. 10 Nos of hold fasts of size 25mmx10mm for |
| 20 | Making and fixing M.S.Sheet gate of required size with twoshutters using necessary M.S.Flats 25x6mm, M.S.Angles 50x50x6mm and M.S.Sheet 5mm thick (7gauge) providing gun metal caps 75mmsize sq.m. 2100.00 2100.00 2100.00 pintols, latches 25cm size for locking arrangements, name boards (C.M.) including cutting iron members, welding fixing gatein position,etc.,complete as directed during execution.(The design of gate furnished is subject to alteration during execution.) (ISI STD) |
| 21 | Stainless Steel Handrail 900mm high Providing and fixing stainless steel handrail 900mm high (as shownin drawing) made out of stainless steel conforming to SS 304 with 8%to8.5% nickel using 50.8mm outer dia at top (with 1.6mm wall thickness) and 38.10mm(1.6mm wall thickness ) stainless steel pipe placed BD-896 vertically at 1m centre to centre and two horizontal SS pipe 25.40mm outer dia (with 1.2mm wall thickness) welded at a distance of 300mm using TIG welding process with 308L SS electrode (in station building all flooor staircases) with necessary bends, flanges and base plates. Rate is inclusive of all materials, labours, lead, lift,etc. as directed by Engineer in-charge |
| 22 | UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM BD-919 sqm. 6893.00 6893.00 6893.00 sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work. |
| 23 | Solid panel PVC door with frame Solid PVC door shutters using 19 gauge 19mm MS sq..tubes for styles and outer frames. 15mm MS sq.tubes for top, lock and bottom rails. The steel tubes shall be covered with 5 mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheet for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mmx30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30 mm. The over all size of frames shall be 50mmx45mm, with suitable rabate |
| 24 | Painting new iron work two coats with ready mixed paint with relevent ISI STD of superior quality and approved colour |
| 25 | Supplying and fixing of Frame fabrication with 1\"x1\" MS square tube with reflective and digital printing on 1mm GI sheets fitted with suitable aluminium beadings on four sides and painted etc., complete as per colour specifications instructed by Corporation officials |
| 26 | Terrace flooring with one course of pressed tiles (with relevent ISI STD) 23cmx23cmx20mm using C.M. 1:3 etc. (one part of cement and three parts of crushed stone sand) (The crushed stone sand to be used in base mortar shall conform to gradation as per IS 1542-1977) |
| 27 | Pointing with cement mortar 1:3 to full depth 6mm thick of tiles 23cmx23cmx20mm etc.,.(Crushed quarry dust) |
| 28 | Cladding the vertical wall with Jet Black Granite slabs (16mm to 18mm thick) and best quality free BD-890C from all defects and set in CM 1:2 for 10mm from all defects and set in CM 1:2 for 10mm sq.m 2459.00 2458.00 2396.00 thick.etc., complete as directed by the Engineer - in - charge |
| 29 | Supplying & Jointing 25mm dia PVC pipe.including cutting, threading and jointing with necessary specials fixing to wall with clamps and screws including making holes in the wall or drilling holes in roof and making good the wall or roof after fixing with necessary scaffolding etc.,complete |
| 30 | Supplying & Jointing 20mm dia PVC pipe.including cutting, threading and jointing with necessary specials fixing to wall with clamps and screws including making holes in the wall or drilling holes in roof and making good the wall or roof after fixing with necessary scaffolding,etc.,complete. |
| 31 | Supplying and fixing 25mm dia wheel valve. |
| 32 | Supplying and fixing 20mm dia wheel valve |
| 33 | Construction of Inspection chamber of size 60x60x60cm with necessary earth work excavation, 40mm size brick jelly concretein C.M.1:4:10 ( 1 cement, 4 Crushed Stone Sand (Commercially No. 6519.00 6519.00 6519.00 called M-Sand) and 10 broken brick jelly)stock brick work in c.M.1:y (1 cement and 6 Crushed Stone Sand (Commercially called M-Sand)) for 23cmthick wall, benching, channelling and plastering,interior,exterior and top with c.M.1:3 (1 cement and 3 Crushed Stone Sand (Commercially called MSand) Sandsand) 12mm thick and |
| 34 | Construction of Inspection chamber of size 60x60x75cm with necessary earth work excavation, 40mm size brick jelly concretein C.M.1:4:10 ( 1 cement, 4 Crushed Stone Sand (Commercially called M-Sand) and 10 broken brick jelly)stock brick work in c.M.1:y (1 cement and 6 Crushed Stone Sand (Commercially called M-Sand)) for 23cmthick wall, benching, channelling and plastering, interior, exterior and top with c.M.1:3 (1 cement and 3 Crushed No. 7348.00 7348.00 7348.00 Stone Sand (Commercially called MSand)) 12mm thick and providing 7.5cm thick RCC loose slab covering in CC 1:2:4 ( 1 Cement,2 Crushed Stone Sand (Commercially called M-Sand) and 4 blue granite broken stone jelly of 12mm to 20mm size) with necessary reinforcement and arrangements to lift for cleaning purpose,etc.,complete. |
| 35 | Supplying and fixing in position best Indian type water closet51cm of superior quality and approved make white glazed earthernware with \"P\" or \"S\" trap and a pair of porcelin footrest and forming flooring alround water closet using 40mm size broken brick jelly concrete in C.C1:4:10(1 cement, 4 Crushed Stone Sand (Commercially called M-Sand) and 10broken brick jelly) and sand filling around the closet including finishing the surface with No. 2483.00 2483.00 2483.00 C.M.1:3 ( 1 cement and 3 Crushed Stone Sand (Commercially called MSand)) 20mm thick including making good all the disturbed portions,etc., complete. |
| 36 | Providing and fixing 75mm dia Nahini trap (floor trap) with brassgratings |
| 37 | Supplying and fixing chromium plated brass towel rail 60cm long |
| 38 | Supplying and fixing white glazed squatting urinal of 60cm lengthin C.M.1:3 ( 1 cement and 3 Crushed Stone Sand (Commercially called MSand)) and pointing with |
| 39 | Providing and fixing white glazed Eruopen water closet with rose wood seatings (black) low level flushing tank with all internal fittings including jointing the trap with soil pipe witProviding and fixing white glazed Eruopen water closet with rose wood seatings (black) |
| 40 | Providing and fixing PVC slotted vent cowl of 110mm dia pipe. with relevent ISI STD |
| 41 | Providing and fixing 110mm dia PVC soil or vent pipe.with relevent ISI STD |
| 42 | Supplying and erecting SINTEX or approved equivalent make HDPE plastic vertical cylindrical 1000 Litre water storage tank, strickly adhering ISI standard as per ISI Mark 12701 (Latest revision) including all taxes and freight charges within Corpn.City Limit. |
| 43 | Supplying and fixing 15mm dia C.P.Pillar tap |
| 44 | Construction of percolation pit using hand boreset to a hole of 300mm dia upto 4.35m depth and filling with 40mm blue metal granite up to depth of 4.5m and fixing 8\"x6\" C.I. grating covering with R.C.C. precast slab 1:1.5:3 with steel of 6kg per c.c. slab of size 450mmx450mmx50mm thick to proper level and alighnment including, pointing the outer surface of B.G.metal above G.L.15cm height with cm 1:3 to full depth curing etc., complete |
| 45 | Supplying and fixing white glazed earthern ware wash basin of size 55x40cm of approved make with a pair of G.I.brackets, 15mm diaC.P.Pillar tap, 32mm C.P.waste fittings with rubber plugs andC.P.chain 32mm, 75cm long P.V.C.waste pipe with necessary union solder joint 90cm long with 15mm lead and brass connections with brass nuts and 15mm dia G.M.wheel valve and giving necessary connection,etc.,complete including cost No. 2707.00 2707.00 2707.00 of white lead, teakwood plug, screws, rubber washers including painting two coats of approved make and colour paint over etc.,complete. (wash basin should be got approved by the Buildings Engineer before use onworks) |
| 46 | Providing and fixing in position superior quality and approved make white glazed flat back lipped urinal of size46.5x55.5x26.5cm with necessary specials such as P.V.C.waste pipe32mm dia with bell mouth opening and 75cm long lead and brass connection, 15mm dia wheel valve etc.,including fixing with necessary teakwood wall plugs, screws, etc.,and making good the walls,etc.,complete as directed during execution. |
| 47 | Supplying and fixing 40 mm S.S Pipe (304) grade for Disableperson toilet\"s. |
| 48 | MODULAR WIRING with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator).( WIRING FOR MODULAR SWITCHES,MODULAR PLATE, MODULAR PLATED M.S BOX, MODULAR MCB shall be added) (For these accessories items, provision shall be made separately which are separately included in the schedule of rates from L432 TO L730 and L730 & L731) |
| 49 | MODULAR WIRING with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall with continuous earth wire connection of 14 SWG TC wire , and making good of the concealed portion, with suitable colour for concealed 15 Amp / 3 pin power plug point ( WIRING FOR MODULAR SWITCHES,MODULAR PLATE, MODULAR PLATED M.S BOX, MODULAR MCB shall be added) (For these accessories items, provision shall be made separately which are separately included in the schedule of rates from L432 TO L730 and L730 & L731) |
| 50 | MODULAR WIRING with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC 5Amp / 3pin plug point.( WIRING FOR MODULAR SWITCHES,MODULAR PLATE, MODULAR PLATED M.S BOX, MODULAR MCB shall be added) (For these accessories items, provision shall be made separately which are separately included in the schedule of rates from L432 TO L730 and L730 & L731) |
| 51 | Cost of supply of 18w 4 feet LED fitting with LED tube complete set (Patty and LED tube) |
| 52 | Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour |
| 53 | Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour |
| 54 | Plastering with cement mortar 1:3 (1 cement and 3 Crushed Stone Sand (Commercially called M-Sand))20mm thick including curing, etc., complete |
| 55 | Supplying and fixing in position cast iron steps of approved quality and make |
| 56 | Supplying and fixing L.S cover and frame 60x60cm size including necessary masonry work with cement mortar, fixing inposition,etc.,complete |
| 57 | Boring using power rig 125mm dia upto hard formation and boring 100mm dia below this in rock formation. The entire column to be cleaned at site as directed including hire charges for the power rig for drilling the bore as described above both upto hard formation and then in rock formation (including the cost of fuel charges, transporting to and from the power rig etc.,complete.) including flushing the bore using compressor for a minimum m. 1343.10 1343.10 1343.10 time of 12 hours etc.,complete providing the danger lights during night time etc.,complete as directed during execution |
| 58 | Supplying and lowering PVC pipe 125mm dia plain casing pipe of m. 331.00 331.00 331.00 6kg/sq.cm. ISI Std |
| 59 | Supplying and lowering PVC pipe 125mm dia slotted casing pipe of 6kg/sq.cm. ISI Std |
| 60 | Conducting yield test using \"V\"notch and with suitable pump for one day as directed during execution for the bore well. |
| 61 | Supplying and Jointing 40mm dia P.V.C pipe.including cutting, threading and jointing with necessary specials fixing towall with clamps and screws m. 197.92 197.92 197.92 including making holes in the wall or drilling holes in roof and making good the wall or roof after fixing with necessary scaffolding etc.,complete |
| 62 | Supplying & Jointing 25mm dia PVC pipe.including cutting, threading and jointing with necessary specials fixing to wall with clamps and screws including making holes in the wall or drilling holes in roof and making good the wall or roof after fixing with necessary scaffolding etc.,complete |
| 63 | Supplying and fixing 40mm dia G.M. foot valve |
| 64 | Supplying and fixing of 1.5 HP Jet Pump Set including all accessories. ( Kiloskar, Texmo, CRI or equivalent Brand) |
| 65 | Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1\" x 1/8\" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. |
| 66 | Supply and fixing of 8 way SP DB of 16 A / way with 32 A DP switch with metal clad of 500 V with F & N (Side Handle) on suitable angle iron frame work with trunking box with earth connection only |
| 67 | Supply and fixing of 32 A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only |
| 68 | Earthing as per the ISI specification with an earth electrode of 2.1mt class \"B\" GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry . |
| 69 | Supply of LED pathway fitting of 10 W to 20 W with 7 years replacement guarantee (for parks and play grounds) |
| 70 | I.SI.MARKED 2X16SQ.MM CABLE |
| 71 | Clamping of 2 x 6 sq.mm L.T UG Cabl on wall with MS Clamp |
| 72 | Labour for laying of cable through HDPE pipe ( 50 mm OD ) in plain cement concrete road including braking of cement concrete road & Filling of plain cement concrete mix of 1:1.5:3 ( with 12 mm jelly ) INCLUDING CARTING OF CABLE & HDPE PIPE (TRENCH SIZE 100mm BREADTH X 150mm DEPTH ) |
| 73 | GST-12% |
AI Tender Summary
Tender Timeline
Jan 26, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 10, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 11, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender