|
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft and loose soil complete all as specified and directed. |
| 2 | Removing excavated material n exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified. |
| 3 | M & L for 75mm thick plain cement concrete type D-2,1:4:8 (40 mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 4 | M&L for precast cement concrete Type B1 1:2:4 (20 mm graded aggregate) in appex stone/kerb stone of any sizewith plain fair faces including chamfers, weathering throting etc and set in cement mortar 1:4 complete with joints to math complete all as specifie and directed. |
| 5 | M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigment as in flooring including 20 mm thick cement screed bed in CM 1:4 complete all as directed. |
| 6 | Excavating in post holes (or similar holes) each n.exc 0.5 Cum getting out and removing surplus soil to a distance n exc 50m and making good surfaces in hard/dense soil |
| 7 | S&F mild steel posts and struts in fencing including cuttingtops to shape as directed, drillingholes, notching for wire etc; flate iron fillets (for securing wire mesh/welded steel wire fabric etc) including all necessarydrilling, bolting or rivetingetc, andsimilar work conforming to Fe-290 Gde E-165 |
| 8 | M & L for cement concrete 1:3:6 type C2 using (40mm graded stone aggregate) as in foundation filling mass concerete complete all as specified |
| 9 | Supply only chainlink fencing any size any type etc complete all as specified and directed. |
| 10 | Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. complete all as specified and directed. |
| 11 | S & F 10 mm dia & overmild steel round bars conforming to Fe 290 (Gde E-165) fixed behind chain link fencing as guard bars etc and similar articles complete |
| 12 | S & F of mild steel screw bolt (machine made with hexagonal or square head at one end and screwed the other or screwed both ends each screw and to be fitted with washer and one hexagonal or square nut lengthof nut n. exc 5cmand dia of shank 5 to 10mm complete |
| 13 | M & L for preparation of new steel surfaces exc 10cm width or girth and apply two coats of synthetic enamel paint over a coat of redoxide primer complete |
| 14 | M & L for preparation of new steel surfaces ofany description, n.exc 10cm in width or girth whendisnconnected with other painting etc and apply two coats of synthetic enamel paint over a coat of redoxide primer complete |
| 15 | Supply and Fix steel tubular swaged pole 9 mtr long type 410 SP-31 complete with CI base plate and final complete all as specified and directed . |
| 16 | M& L cross arms ,bracings,supports clamps and back plates fabricated from structural chainal steel sections including nuts,bolts ,washers,welding ,bending cold or hot ,drilling holes for bolts ,in any shape or size as indicated or directed and inclusive of one primer coat,one under coat and one finishing coat of paint . |
| 17 | M& L for LED flood light fitting 120 Watts made out of pressure die cast aluminium housing and IP 66 protection with emmiter LED incl. making electric connection .Make of LED Lights :- cat Part No :- JETAIRISFLS120WLED757APNBLTGof Havells orequivalent in Cromption/Phillips . |
| 18 | Supply and laying or fixing through pipe,1100 volt grade heavy duty cable with XLPE insulated,PVC sheathed,armoured aluminium conductor 16 sqmm 4 core nominal cross section in service connection stranded counductor all as specified and directed . |
| 19 | Supply & fix polystyrene body IP 65 cable juction box with connector metric knockouts on all sides for cable entry including cable gland,size of juction box 200x160x98 mm as per Hensel cat ref No. K 9255 or equivalent duly fitted with followings:-(a) ELMEX or equivalent make end plate -1 Nos(b) ELMEX or equivalent make end clamps -2 Nos (c) Clamps made of 30x5 mm flat iron duly painted with two coats of a aluminium paint over a Coat of red oxide primer suitable for steel tubular swaged pole type 410 SP -31 |
| 20 | M& L for making service connection from MCB DB to LED floodLightfitting with PVC sheathed 2.5 sqmm twin core multi-stranded copper cable of required length complete all as spd and directed . |
| 21 | M& L for MCB single pole 240 volts any rating from 6 to 32 amps ,with repurting capacity 10 KA including providing thimble for out going cables . |
| 22 | M& L for MCB SPN240 volts any rating from 6 to 40 amps ,with repurting capacity 10 KA including providing thimble for out going cables . |
| 23 | Supply ,fix and testing ,commissioning of Cone -IP 65 Garden Light as an imposing strret furniture .The elegent yet minimalistic design acts a silent observer and giving light,diffuser at the upper portion adds functional value into landscape enviorement .Havells Model No cat pot No :- CONEBLS8WLED830PSYMTOPC (0.6m) Make :- Havells/Crompton/Bajaj |
| 24 | Supply and laying or fixing through pipe,1100 volt grade heavy duty cable with XLPE insulated ,armoured aluminium conductor 6 sqmm 2 core nominal cross section in service connection stranded counductor all as specified and directed . |
| 25 | Excavation in soft /loose soil in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out complete. |
| 26 | Returnig filling with earth obtained from excavation including spreading watering and consolidation in layers not exceeding 25 cm thick complete. |
| 27 | Removing surplus soil to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m above the starting point complete. |
| 28 | M&L for good quality dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick gently punned down to 10 cm after laying the cable all as specifiedin clause 19.75 of MES Schedule Part-I (2009) .Note :- Sand shall be fined sand as specified and punned thickness shall be measured and paid . |
| 29 | Supply & laying sub class\"B\" bricks of old size (230x115x75 mm) or of size locally avialbe ,laid along alingment of cable as protection to cable in trenches complete all as specified and directed by Engr-in-Charge . |
| 30 | Supply & Installation of \"Ring Fountain\" (Dia 12\") complete including accessories as following:- (Note:- The design of ring fountain shall be got approved from GE before commencement of works at site. |
| 31 | 9\" GI Ring for fountain ,Body -GI . |
| 32 | Crown Nozzle ,Body -Brass Chrome Plated . |
| 33 | Jet Nozzle Body- Brass Chrome Plated . |
| 34 | Open Well Submersible pump 3HP ,LPM-400,Head 15 Mtr |
| 35 | Programable RGB Led Lights, Body-Noral, ABS Make-Havells or equivalent approved |
| 36 | Programmable Controller for above said light Colour changing EffectMake - Havells or equivalent approved |
| 37 | Electrical panel with Starter MCB’s, Ammeter, Voltmeter, Single phase preventer, indicating lights in 16-gauge Double door powder coated weather proof body Indoor Panel.(All accessories are of reputed make such as L&T) Note :- The panel board shall be equipped with all controls , indicators and switch gear of suitable capacity as requred for smooyth functioning of Ring fountain. |
| 38 | Necessary plumbing equipmentSuch as piping in UPVC 10kg/cm2 Pressure (Prakash/ Prince, Supreme) with Complete fittings, control valves, Etc. |
| 39 | Necessary electrical equipment Such as submersible cabling, Conducting etc. |
| 40 | Supply & Installation testing & commissioning of \"FloatingFountain\" complete including as following (Note:- The design offountain shall be got approved from GE before commencement of works at site. |
| 41 | 4’ Dia FRP Floating,Body – FRP,Dia- 4’Make-Jindal/Surya/Prakash |
| 42 | 3’GI RingBody – GI |
| 43 | 2’GI RingBody – GI |
| 44 | Vertical jet Nozzle Body- Brass Chorme Plated. |
| 45 | Aerator Jet/ Holo Jet Nozzle Body- Brass with Chorme Plated . |
| 46 | Open Well Submersible pump 5HP,LPM-546,Head 18 Mtr |
| 47 | Programmable Color Changing LED based Water Proof Light (18W)Body – Noral, ABS Make :Havells or equivalent approved |
| 48 | Programmable Controller for above said light Colour changing EffectMake : Havells or equivalent approved |
| 49 | Electrical panel with Starter MCB’s, Ammeter, Voltmeter, Single phase preventer, indicating lights in 16-gauge Double door powder coated weather proof body Indoor Panel. (All accessories are of reputed make such as L&T)Note :- The panel board shall be equipped with all controls , indicators and switch gear of suitable capacity as requred for smooyth functioning of Ring fountain. |
| 50 | Necessary plumbing equipment MS angle Frame for Floating with UPVC 10kg Pipe and Complete fittings, control valves, Etc. |
| 51 | WIRING & CABLING Wiring for Pump, Under water Lights and Transformers (Wire / Cable : RR Cabel,Havells, |
| 52 | Excavationin trenches, not exceeding 1.5m wide and not exc 1.5m in depth and getting out in hard/dense soil, for removing/laying pipes, complete all as specified and as directed by Engr-in-charge. |
| 53 | Returnig, filling in(soil) including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in any type of soil, complete all as specified and directed by Engr-in-Chage. |
| 54 | Removal of excavated materials (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and directed by Engr-in-Charge |
| 55 | M&L for steel water tubing of nominal bore 25mm, medium grade galvanised with all fittings including short lengths, laid in trenches complete with all fitting (such as bends, elbows, Tee, short pieces, connectors, back nuts, dimishing pieces, caps and plugs, unions etc.) complete all as specified. |
| 56 | S/F stop cock 25mm bore cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwdedboth ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 57 | S&F gun metal gate or globe valveswith iron wheel head screwed both ends for 25 mmiron pipe and fixed, ISI marked comlpete all as specified and directed. |
| 58 | Drilling and tapping 25 mm dia cast iron water mains (in position) for branch connections of the internal dia. |
| 59 | Supply and planting of below mentioned trees in 0.25-0.3M poly bags with height 1.5M to 1.8 Mtr incl digging holes 1.2M dia x 1.2 Mtr deep in ordinary soil and reffiling the same with the excavated earth mixed with manure or sludge in the ratio 2:1 (02 parts of stackedvolume of earth after reduction of 20% with 1 parts of stacked volume of sludge of manure after reduction by 80% flooding with water and removed of surplus soil incl maintaining the plants for 2 years:-for following Shaddy/ Ornamental Plants |
| 60 | Casoraina |
| 61 | Canarydate palm |
| 62 | Amaltas |
| 63 | Neem |
| 64 | Gulmohar |
| 65 | Kesia |
| 66 | Kamuj |
| 67 | Ashoka |
| 68 | Silver Palms |
| 69 | Arica Palms |
| 70 | Phicus |
| 71 | Exugora dwarf |
| 72 | Golden Bamboo |
| 73 | Eucalyptus |
| 74 | Same as per Serial No 39 for following Fruit Bearing Plants |
| 75 | Amla |
| 76 | Mango |
| 77 | Guava |
| 78 | Jamun |
| 79 | Sitaphal |
| 80 | Anar |
| 81 | Cheeku |
| 82 | Same as per Serial No 39 for Flower/ Fragment Plants:- |
| 83 | Jasmine |
| 84 | Alortonia |
| 85 | Bottle Brush |
| 86 | Rose |
| 87 | Bugenella |
| 88 | Battle Nut |
