|
| 1 | COPPER WIRING IN MS CONDUIT (SURFACE/RECESS)23.1.1.2Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick MS conduit pipe.Group B |
| 2 | 23.1.4.2 Wiring in MS conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin socket and 1 no 5/6 Amp switch required MS Box etc complete as requiredGroup B |
| 3 | 23.1.5.2 Wiring in MS conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin socket and 1 no 15/16 Amp switch required MS Box etc complete as requiredGroup B |
| 4 | 23.1.6.1 Wiring main ,sub mains and Circuit wiring in twosingle core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in MS Conduit etc as required.1 run of Size 1.50 Sqmm(1/1.40mm) |
| 5 | 1 run of Size 2.50 Sqmm(1.1.80mm) |
| 6 | 23.6.6.1 Supply and erection of MS conduit pipe 1.6 mm thick , ISI marked surface/recessed in slab/wall/ceiling etc. including cost of MS bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work.MS Pipe of 20 mm dia. |
| 7 | Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect.23.8.1.1 Switch 5 amp. on existing sheet. |
| 8 | 23.8.1.2Wall socket 5 amp on existing sheet. |
| 9 | 23.8.1.315 amp. switch on existing sheet. |
| 10 | 23.8.1.46 pin 15 multi socket on existing sheet |
| 11 | 23.8.1.12Bakelite angle/straight button holder large size. |
| 12 | 23.8.1.13Socket size rotary step type Electronic regulator for A.C. ceiling fan |
| 13 | 23.8.4 Supply and erection of 10.5 cm dia M.S.Fan box including 8 mm dia 30 cm long M.S. Road made into suitable suspension hook and erected in R.C.C. slab for the erection of fan complete with all labour and material required to complete the job. |
| 14 | 23.9Erection of exhaust fan in existing opening ,complete with necessary earthling of fan including carriage from PWD store to the site of work. |
| 15 | 23.11Making suitable hole in the wall suitable for exhaust fan up to 450 mm sweep including finishing the same and fixing of Stainless stell wire mesh 2 mm thick having about 50 meshes per inch at exhaust sidecomplete as required |
| 16 | 23.12Providing and fixing outdoor duty Ply of 8 mm thick frame suitable for exhaust fan up to 450 mm sweep etc complete as required |
| 17 | 23.13Supply, erection and fixing of 8 mm thick ply wood board having a circular /rectangular hole etc as required including the cost of making hole, nuts and bolts, painting and other petty material with all labour etc. complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. |
| 18 | 23.20 Fixing of LED Tube light/ 2*2 ft square panel fitting directly on wall /ceiling or false ceiling including making connections etc as required. |
| 19 | 23.22.1.9 Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work.4 pole MCCB 6 amp to 100 amp |
| 20 | 23.22.2.1MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings.MCCB up to 125 A FP |
| 21 | 23.22.4.2Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to to the entire satisfaction of the Engineer-in-Charge of the work.SPN DBDouble Door 8 way ( 2 incoming and 6 outgoing) |
| 22 | 23.22.4.6TPN DBHorizontal type Double Door 6 way ( 8 incoming 3phase*6 outgoing) |
| 23 | 23.22.4.11 Vertical TPN DB Double Door8 way ( 8 incoming 3phase*8 outgoing) |
| 24 | 23.22.5Supply and erection of miniature circuit Breaker/isolator 240/415 V in the existing distribution board including making necessary connections:-6 amp. to 32 amp Single Pole |
| 25 | 23.22.5.56 amp. to 32 amp MCB\"s TRIPLE POLE |
| 26 | 23.22.5.76 amp. to 32 amp MCB\"s FOUR POLE |
| 27 | 23.22.5.840 amp to 63 amp. MCB\"s FOUR POLE |
| 28 | 24.1.1Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoalor coke and salt) as required. |
| 29 | 24.1.2Extra for using salt and char coal/coke for pipe earth electrode as required. |
| 30 | 24.1.6Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including solderingetc. as required. |
| 31 | 24.1.14Supply and erection of 20mm x 3 mm thick GI, tape fixed with suitable G.I. stapples of same size. |
| 32 | 24.2.7.2Supply and erection ofsuitable compression type brass cable glands for underground Cable :-10 sqmm to 16 sqmm Cable 2 to 4 Core |
| 33 | 24.2.7.3 25 sqmm to 50 sqmm Cable 2 to 4 Core |
| 34 | 24.2.8.3Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer- in-charge of the work.10 sqmm |
| 35 | 24.2.8.416 sqmm |
| 36 | 24.2.8.635 sqmm |
| 37 | 24.4.3Supply and erection of 32mm dia metre 1.5 m long bracket (B-class) making an angle of 10° to 15° with horizontal plane for mounting street light fitting fixing of GI. bracket on wall with 2 nos. 32 mm x 3 mm thick M.S. clamps including cost of cutting, welding of G.I. pipe complete with cement sand mixture, bolts and nuts etc. includingnecessary connections. |
| 38 | 24.4.6Supply and erection of Three Phase weather proof M.S. box of size 30 cm x 20 cm x 15 cm with hinged cover made of 2 mm thick MS sheet, locking arrangements, housed in wall/fixed on pole , including the cost of 1 no 4 way 16 A bakellite connector, 1 no. 16 amp TP MCB and 4 Nos. 16 amp. neutral links fixed on bakellite sheet in the M.S. boxand necessary connections. |
| 39 | 24.5.2S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level includingdiging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work.DWC/HDPE pipe 63/50 mm outer dia/inner dia |
| 40 | NS itemsSupply and erection of under ground Aluminum Armoured cableXLPE insulated loose in existing pipe or trenches complete with necessary connection.10 sqmm 4 Core |
| 41 | 16 sqmm 4 Core |
| 42 | 35 sqmm 4 Core |
