Construction Of Cwsn Toilet At Govt. High School Mela ( Zone Sallan ) District Kathua
Tender Value
2 Lakhs
Estimated cost
Bid Submission
01 Feb 2022
0 days left
EMD
4000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kathua → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Cwsn Toilet At Govt. High School Mela ( Zone Sallan ) District Kathua
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by manual means in trenches for foundation,drains, pipes, cables etc(not exceeding 1.5 mt in width)and for shafts,wells cesspits and the like not exceeding 10sqm on plan depth up to 1.5mt including disposal of excavated earth up to 1 mt from cutting edge disposed earth to be levelled and neatly dressed in. All kind of soil. |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) (including all lead, lift & carriages) |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (including all lead, lift & carriages) |
| 4 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) (including all lead, lift & carriages) |
| 5 | Reinforcement for RCC work including straightening cutting, bending, placing in position & binding all complete with TMT bars. |
| 6 | Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand) & Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) (including all lead, lift & carriages) |
| 7 | Centring and shuttering including strutting , propping etc. and removal of form work for Foundations , footings bases of columns etc. for mass concrete |
| 8 | Centring and shuttering including strutting , propping etc. and removal of form work for Suspended floors, roofs, landing, balconies and access plate form |
| 9 | Centring and Shuttering including strutting, propping etc and removal of form work for Edges of Slabs and Break in floors and walls (Under 20 cms wide) |
| 10 | 6mm cement plaster to ceiling of mix 1:3 ( 1 cement :3 fine sand) (including all lead, lift & carriages) |
| 11 | 12 mm cement plaster of mix 1:6 ( 1 cement : 6 coarse sand) (including all lead, lift & carriages) |
| 12 | 15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 fine sand) (including all lead, lift & carriages) |
| 13 | Structural steel work welded and built up section, trusses and framed work , including cutting, hoisting fixing in a positionand applying a premier coat of approved steel primer all complete. |
| 14 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. |
| 15 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works upto plinth level in (1:2:4) grade with 20mm nominal size of crushed stone aggregates (including all lead, lift & carriages). |
| 16 | Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 17 | Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarsesand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 18 | Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Crushed (including all lead, lift & carriages). |
| 19 | Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade New steel work (two or more coats) |
| 20 | Distempering with 1st quality acrylic washable distemper(ready made) of approved manufacturer and of required shade/ colour complete as per manufacturer\"s specifications Two or more coats on new work |
| 21 | Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10sqm |
| 22 | Providing and fixing on wall face unplasticisedrigid PVC rain water pipes conforming to IS 13592 typeA including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. 110 mm diameter . |
| 23 | Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.: INTERNAL WORK-Exposed on wall 15 mm dia. nominal bore |
| 24 | Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.:INTERNAL WORK-Exposed on wall 20 mm dia. nominal bore |
| 25 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license]. |
| 26 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms 15 mm nominal bore |
| 27 | Supplying and fixing C.I. cover withframe for manholes 450mm |
| 28 | Proving and laying in position flow trap inculding all fittings , complete job. |
| 29 | Providing & fixing C.P brass angle valve for basin mixer and geyser points of approved make conforming to IS:8931 (15mm nominal bore) |
| 30 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors.W.C. pan with lSI marked white solid plastic seat and lid.(Hindware/Cera) |
| 31 | Providing and fixing wash basin with C.I/M.S brackets, 15mm C.P brass pillar taps, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China wash basin size 550x400 mm with single 15 mm C.P. brass pillar taps.(Hindware/Cera) |
| 32 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back ,for the reception of pipes and fittings |
| 33 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 34 | Providing & fixing C.P brass bib cock of approved quality conforming to IS:8931.(15mm nominal bore) |
| 35 | Providing and fixing grating including all fitting complete. |
| 36 | Providing and fixing water spray jet for water closet including all fittings complete job. |
| 37 | Providing and fixingPVC waste pipe of sink or wash basinincluding PVC waste fitting complete. 32 mm dia |
| 38 | Providing and fixing uplasticised PVC connection pipe with brass unions15 mm nominal bore |
| 39 | Providing and laying in position pvc drainage pipe including all fitting , complete job. Finolex/Supreme made 4 \"dia |
| 40 | Providing and laying in position pvc drainage pipe including all fitting , complete job. Finolex/Supreme made 3 \"dia |
| 41 | Providing and fixingPVCBend 100 MM dia |
| 42 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms |
| 43 | Providing & fixing electric points complete in all respect as per necessary as site. |
| 44 | Providing and fixing 1 horse power electric water motor pump including all fitting , complete job. |
AI Tender Summary
Tender Timeline
Jan 24, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 01, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 02, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender