3 Nos Of Clubbed Up Rural Piped Water Supply Scheme To Tangini, Ondarangi And Gurjiguda Under Pottangi In The Dist. Of Koraput
Tender Value
2.83 Crore
Estimated cost
Bid Submission
31 Jan 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pottangi → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
3 Nos Of Clubbed Up Rural Piped Water Supply Scheme To Tangini, Ondarangi And Gurjiguda Under Pottangi In The Dist. Of Koraput
BOQ
| Sl. No. | Item Description |
| 1 | PIPEWATER SUPPLY TOTANGINI (TANGINI & SITAMPADU) (ZONE-1) |
| 2 | CONSTRUCTION OF 20,000 LTR RCC OGR |
| 3 | Designing , construction, testing and commissioning of 20,000 ltr capacity circular shape flat bottom with domb shape RCCon the groundreservoir including supplying , fitting, fixing of M.S and aluminuim ladder ,water level indicator, lightening arrester 1 nos. 80 mm CI puddle collar-4, 2 nos. CI MH cover, Inlet & Outlet arrangement with 80 mm dia GI pipe - 12 mtr and soil testing & drawing design etc. testing of the joints all complete fitting and fixing,80 CI sluice valves-1 No, Sluice valve chamber -1 nosof standard make providing CC M-25 for RCC work with 20mm& down grade size hg chips with 20mm thick cement plater over the cement concrete work, cement punning over plaster surface and painting 2 coats of water proofingweather coat etc. all complete as per approved drawing and design as per direction of Engineer-in-Charge. |
| 4 | CONSTRUCTION OF COMPOUND WALL FOR OGR |
| 5 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 6 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 7 | Supplying all labour, T&P and materials and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 8 | Supplying all labour, T&P and materials and providing 1\" thick D.P.C. over stone metal with cost, conveyance, tax, royalty of materials required and as per specification and direction of the Engineer-in-charge. |
| 9 | Supplying all labour, T&P and materials and providing brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 10 | Cost of MS Grill Gate |
| 11 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per the direction of the Engineer-in-charge |
| 12 | Supplying all labour, T&P and materials and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 13 | Supplying all labour, T&P and materials and providing 20mm. thick cement plaster in cement mortar (1:6) for stone workand conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 14 | Supplying all labour, T&P and materials and finishing walls withweather coat of approvedpaint over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 15 | Supplying all labour, T&P and materials and Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 16 | LAYING OF RISINGMAIN & DISTRIBUTION SYSTEM |
| 17 | Earth work in excavation of trenches for laying of pipe line including dressing, leveling the bed upto required depth & within initial lead of 50mtrs & 1.5mtrs initial lift breaking clods to maximum size (5 to 7cm) laying in layers not exceeding 0.30mtrs in depth etc. complete including cost of all labour, T&P, pipes, fittings and specials etc.required for completion of the item as per specification & direction of Engineer in charge. |
| 18 | In all kind of Soil : (1500 mtr x 0.38mtr x 0.90mtr) |
| 19 | In Stoney Earth : (1680 mtr x 0.38mtr x 0.90mtr) |
| 20 | Transporting and supplying all materials, labour T&P, fabricating, fitting and fixing with specials at the site using Electric resistance welded pipes of reputed make (TATA /Zindal ), confirming to IS 1239 (P-1) 2004, IS 1978 & IS 3598, medium quality & standard weight, including cutting the pipes & flanges, drilling the bolt holes in the flanges, matching the pipes and flanges and jointing with proper gradient & alignment, welding with arc welding using electrodes with power generated by using mobile diesel generator set, etc. complete as per direction of Engineer in charge, including painting two coats with black anti-corrosive paint over one coat of primer, all cost, conveyance, taxes of paints, cost of fittings as \"T\", Bend, Offsets, Nuts and bolts, Leather packing etc. but including the cost of flanges and required earthwork, cutting holes in masonry works etc. |
| 21 | 80 mm dia G.I pipe |
| 22 | Supplying all materials including HDPE pipes, fittings and specials, labour, T&P for laying in trenches unplasticised HDPEpipes of the following outside diameter for all classes and specials as required at site, including jointing with solvent cement by non heat application method excluding the cost of earth work in excavation but including the cost of pipescost of fitting and specials& testing the pipe line etc. all complete as per direction of Engineer-in-charge. |
| 23 | 90 mm HDPEPipe PE-80 PN-6 |
| 24 | Supplying all labour, T&P for filling excavated earth in the pipe line trenches by laying in layers not exceding 9\" (225mm) including watering and ramming as per the directionEngineer-in-charge. |
| 25 | In all kinds of soil : |
| 26 | In Stoney Earth : |
| 27 | Supplying all labour T&P fitting and fixing of CI sluice valves with double flanged ends in the water line for controlling purposes conforming to IS:14846-2000 for the following rating and nominal diameters as per specifications complete of approved make with supply of all joining materials, T&P etc all complete including testing as per specicication complete |
| 28 | 80 mm dia CI Sluice Valve IS- 14846/2000 PN-1.00 |
| 29 | 80 mm dia CI NR Valve IS- 14846/2000 PN-1.00 |
| 30 | 15 mm dia CISingle Air Valve IS 14845/2000 |
| 31 | Supplying all labour, material, T&P and constructing brick masonry valve chambers of following mentioned inetrnal dimension, complete with C.C (1:4:8) with 40 mm size hbg metal at the bottom, C.B brick masonry in c.m(1:4) with internal plastering and R.C.C top cover with C.C(1:2:4) with 12mm size hbg metal & MS Rod 0.85qntl per 1 cum and with 12mm thick cement plaster (1:4)complete in all respect as per the direction of the Engineer-in-charge. |
| 32 | SluiceValve/NR Valve Chamber (Size 0.90mtr x 0.90 mtr x 1.15 mtr) |
| 33 | Air Valve Chamber(Size 0.75mtr x 0.75mtr x 1.15mtr) |
| 34 | Supplying all labour, T&P and dismantling of concrete road/Metalled road/Asphalt roads for laying of pipe line and making good to the damagesas per approved design and specification. |
| 35 | Supplying all wirks labour T&P for making of concrete road with CC(1:4:8) work using 4 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respect as per specification and direction of the Engineer in Charge. |
| 36 | Supplying all wirks labour T&P for making of concrete road with CC(1:2:4) work using 12 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respect as per specification and direction of the Engineer in Charge. |
| 37 | Supplying all labour T&P laying of pipe line to each house hold including cost of PVC/GI pipe, saddle of required size, 1/8\"(3mm) brass ferrule and bib cock at the end of supply line including excavation trenches and making good the damages etc complet as per direction of Engineer in Charge as approved design and specification. |
| 38 | Along the pipe line |
| 39 | Opposie side of pipe line |
| 40 | Supplying all wirks labour T&P for making of platform of size(0.45x0.45x0.10) for FHTC with CC(1:2:4) work using 12 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respectas per specification and direction of the Engineer in Charge. |
| 41 | Supplying all labour T&P and materials such as 1000 liter capacity syntex tank, GI pipe of 15 mm 20 mm 25 mm size of medium quality with ferrule cock , FWV etc for water supply to AWC, UP School, GP office, medical etc with provision of staging for PVC tank complete. (Detailed estimateattached) |
| 42 | Supplying all labour Materials, T&P for construction of MS display board 1.50m x 1.20 m etc. Complete as per direction of the Engineer-in-Charge. |
| 43 | CONSTRUCTION OF PUMP HOUSE |
| 44 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soilwith all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 45 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 46 | Providing cement concrete M-25 for RCC work with 20mm and down gred size hg chips including hoisting and laying etc. complete excluding cost of MS rod including rigid and smoth centering and shuttering for RCC work includingfalse works and dismentaling after casting as per direction of Engineer-in-charge. |
| 47 | RCC Column & Beam |
| 48 | Supplying, filling in foundation & plinth with sand in 15cms. (9\") thick layers with the cost conveyance royalties, taxes of the materials complete as per specification and direction of the Engineer-in-charge |
| 49 | Supplying all materials, labour, T&P and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 50 | Supplying all materials, labour, T&P and providing Brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 51 | Supplying all materials, labour T&P providing R.C.C. (1:2:4) workusing 12mmsize hard black hand broken granite stone chipsincluding cost conveyance taxes and royalty of all materials and labour with T&P required for the work etc, complete in all respect but excluding cost of MS Rods or Tor Steel and binding wires of 18 to 20 gauge as perincluding the cost of required quantity of centering and shuttering as per the dirction of the Engineer in Charge. |
| 52 | Lintel |
| 53 | Chajja |
| 54 | Beam |
| 55 | Slab |
| 56 | Straightening bend up or coiled rods cutting bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor Steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works including cost, conveyance and taxes of M.S. Rods or Tor Steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc, complete in all floors as per specification and direction of the Engineer-in-charge. |
| 57 | Cost of M.S doors and windows: |
| 58 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per specification and direction of the Engineer-in-charge. |
| 59 | Supplying all materials, labour, T&P and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 60 | Supplying all materials, labour, T&P and providing C.C. (1:2:4) workusing 12mmsize hard black broken granite stone chips including cost, conveyance, royalty & taxesetc, complete in all respect but excluding cost of M.S. Rods or Tor Steel and binding wires of 18 to 20 gaugeas per specification and direction of the Engineer-in-charge. |
| 61 | Providing, fixing tiles in dados skirting and risers of steps on 12mm. thick cement plaster(1:3) jpinted with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge. |
| 62 | Providing & fixing (Glazed) tiles in all floor & treads of steps & landing on 25 mm thick bed of cement mortar in proportion (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge. |
| 63 | Supplying all materials, labour, T&P and providing 20mm (3/4\") thick cement plaster (1:6) finished smooth to out side of stone work after raking out the joint including, watering and curing with cost and conveyance of all materials and labour with T&P ,all taxes and royalties etc., complete in all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 64 | Supplying all material, labour, T&P and providing grading concrete with C.C(1:2:2) using 06mm. Size hard stone broken chips of approved quality including hpisting and laying not exceeding 25mm. thick with proper packing and required slope, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect as per specification and direction of the Engineer-in-charge. |
| 65 | Supplying all labour, T&P and materials and finishing walls withtwo coats of weather coat over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 66 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 67 | CONSTRUCTION OF COMPOUND WALL FOR PUMP HOUSE |
| 68 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 69 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 70 | Supplying all labour, T&P and materials and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 71 | Supplying all labour, T&P and materials and providing 1\" thick D.P.C. over stone metal with cost, conveyance, tax, royalty of materials required and as per specification and direction of the Engineer-in-charge. |
| 72 | Supplying all labour, T&P and materials and providing brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 73 | Cost of MS Grill Gate |
| 74 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per the direction of the Engineer-in-charge |
| 75 | Supplying all labour, T&P and materials and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 76 | Supplying all labour, T&P and materials and providing 20mm. thick cement plaster in cement mortar (1:6) for stone workand conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 77 | Supplying all labour, T&P and materials and finishing walls withweather coat of approvedpaint over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 78 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 79 | PUMPING UNIT |
| 80 | Supplying installing, testing & commissioning of suitableVerticalSumersible pumping set of any repurted make such as KSB/Crompton/Greaves/ Kirloskar CRI/Suguna etc with energy efficient motor with ISI mark to run in3 phase AC supply capble to discharge clear water from Production well @3.00 Lps against a total head of 110 mtrs. etc. All complete as per direction of Engineer in Charge. |
| 81 | Supplying Testing ,and installation of suitable control pannel Boardfor suitablesubmerssible pump and motor set with reputed ISI make. |
| 82 | Make BCH/L & T/Havels |
| 83 | Supplying, fitting & testing of 4mm2 three core flat submerssible electric cable reputed ISI make Finolex/BCH/Havells |
| 84 | Required assessories like G.I R/S, stainless Steel nipple, G.I bend,wire ropw allof heavy quality with M.S calmp, MS bore cover etc. as required at site to complete the installation of the pimp set etc.complete in all respect. |
| 85 | Supplying of 50 mm dia HDPE suction pipe for lowering of pump & motors etc |
| 86 | SITE DEVELOPMENT |
| 87 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 88 | In all kinds of soil : |
| 89 | INTERNAL ELECTRIFICATION |
| 90 | Supplying the following materials ,required labour and T &P and providing internal electrification to pump house as required at site including commisioning and testing as per the direction of the Engineer in Charge. |
| 91 | Surface wiring to light point in 20mm dia PVC cond. Pipe on MS board wiyh 3mm thick mulltistand copper wire. |
| 92 | Short point |
| 93 | Medium point |
| 94 | Surface wiring to 3pin 5A plug point in 20m dia pvc conduit on existing board . |
| 95 | surface wiring to 3pin 5A plug point in 20m dia pvc conduit on existing board . |
| 96 | Medium point |
| 97 | B.H. Fitting including all connection. |
| 98 | 63 AMP 440 V ICTPN main switch |
| 99 | 3 nos 63 Amp kitkat fuse on MS Board. |
| 100 | 32 Amp main switch with all connections |
| 101 | Sub- main wiring 4 x 4mm2 copper wire with in 20mm dia pvc conduit. |
| 102 | Sub- main wiring 2 x 2.5mm2 copper wire with in 20mm dia pvc conduit. |
| 103 | Standard earthing in 38mm dia 3mtr long GI pipe with No 8 GI wire including all connections. |
| 104 | 4\" x 40 W F.L. Fitting complete with tube. |
| 105 | 25 x 5 mm thick iron FL frame covered with GI sheet with painting , ( 6.5 ft x 2.5 ft ) embeded on wall with all consumable materials like cement chips painting etc including all connections with PVC paint, flexible pipe,copper cable etc. |
| 106 | 15 Amp switch and socket on 10 x 12 size MS board with all connections |
| 107 | RYB phase indicator with control 5 Amp F.T. switch with all connection. |
| 108 | 5 Amp plug point on separate board fixed with 7\" x 4\" MS box with lylem cover with necessary connection. |
| 109 | Short point |
| 110 | 10mm2 4 core cable |
| 111 | Ceiling Fan |
| 112 | 5YEAR OPERATION & MAINTENANCE |
| 113 | CostofOpernation & maintenance as per term & condition and technical specification mentioned in SBD. |
| 114 | PIPEWATER SUPPLY TOTANGINI (JODIMADIL) (ZONE-2) |
| 115 | CONSTRUCTION OF 20,000 LTR RCC OGR |
| 116 | Designing , construction, testing and commissioning of 20,000 ltr capacity circular shape flat bottom with domb shape RCCon the groundreservoir including supplying , fitting, fixing of M.S and aluminuim ladder ,water level indicator, lightening arrester 1 nos. 80 mm CI puddle collar-4, 2 nos. CI MH cover, Inlet & Outlet arrangement with 80 mm dia GI pipe - 12 mtr and soil testing & drawing design etc. testing of the joints all complete fitting and fixing,80 CI sluice valves-1 No, Sluice valve chamber -1 nosof standard make providing CC M-25 for RCC work with 20mm& down grade size hg chips with 20mm thick cement plater over the cement concrete work, cement punning over plaster surface and painting 2 coats of water proofingweather coat etc. all complete as per approved drawing and design as per direction of Engineer-in-Charge. |
| 117 | CONSTRUCTION OF COMPOUND WALL FOR OGR |
| 118 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 119 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 120 | Supplying all labour, T&P and materials and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 121 | Supplying all labour, T&P and materials and providing 1\" thick D.P.C. over stone metal with cost, conveyance, tax, royalty of materials required and as per specification and direction of the Engineer-in-charge. |
| 122 | Supplying all labour, T&P and materials and providing brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 123 | Cost of MS Grill Gate |
| 124 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per the direction of the Engineer-in-charge |
| 125 | Supplying all labour, T&P and materials and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 126 | Supplying all labour, T&P and materials and providing 20mm. thick cement plaster in cement mortar (1:6) for stone workand conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 127 | Supplying all labour, T&P and materials and finishing walls withweather coat of approvedpaint over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 128 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 129 | LAYING OF RISINGMAIN & DISTRIBUTION SYSTEM |
| 130 | Earth work in excavation of trenches for laying of pipe line including dressing, leveling the bed upto required depth & within initial lead of 50mtrs & 1.5mtrs initial lift breaking clods to maximum size (5 to 7cm) laying in layers not exceeding 0.30mtrs in depth etc. complete including cost of all labour, T&P, pipes, fittings and specials etc.required for completion of the item as per specification & direction of Engineer in charge. |
| 131 | In all kind of Soil : (600 mtr x 0.38mtr x 0.90mtr) |
| 132 | In Stoney Earth : (620 mtr x 0.38mtr x 0.90mtr) |
| 133 | Transporting and supplying all materials, labour T&P, fabricating, fitting and fixing with specials at the site using Electric resistance welded pipes of reputed make (TATA /Zindal ), confirming to IS 1239 (P-1) 2004, IS 1978 & IS 3598, medium quality & standard weight, including cutting the pipes & flanges, drilling the bolt holes in the flanges, matching the pipes and flanges and jointing with proper gradient & alignment, welding with arc welding using electrodes with power generated by using mobile diesel generator set, etc. complete as per direction of Engineer in charge, including painting two coats with black anti-corrosive paint over one coat of primer, all cost, conveyance, taxes of paints, cost of fittings as \"T\", Bend, Offsets, Nuts and bolts, Leather packing etc. but including the cost of flanges and required earthwork, cutting holes in masonry works etc. |
| 134 | 80 mm dia G.I pipe |
| 135 | Supplying all materials including HDPE pipes, fittings and specials, labour, T&P for laying in trenches unplasticised HDPEpipes of the following outside diameter for all classes and specials as required at site, including jointing with solvent cement by non heat application method excluding the cost of earth work in excavation but including the cost of pipescost of fitting and specials& testing the pipe line etc. all complete as per direction of Engineer-in-charge. |
| 136 | 90 mm HDPEPipe PE-80 PN-6 |
| 137 | Supplying all labour, T&P for filling excavated earth in the pipe line trenches by laying in layers not exceding 9\" (225mm) including watering and ramming as per the directionEngineer-in-charge. |
| 138 | In all kinds of soil : |
| 139 | In Stoney Earth : |
| 140 | Supplying all labour T&P fitting and fixing of CI sluice valves with double flanged ends in the water line for controlling purposes conforming to IS:14846-2000 for the following rating and nominal diameters as per specifications complete of approved make with supply of all joining materials, T&P etc all complete including testing as per specicication complete |
| 141 | 80 mm dia CI Sluice Valve IS- 14846/2000 PN-1.00 |
| 142 | 80 mm dia CI NR Valve IS- 14846/2000 PN-1.00 |
| 143 | 15 mm dia CISingle Air Valve IS 14845/2000 |
| 144 | Supplying all labour, material, T&P and constructing brick masonry valve chambers of following mentioned inetrnal dimension, complete with C.C (1:4:8) with 40 mm size hbg metal at the bottom, C.B brick masonry in c.m(1:4) with internal plastering and R.C.C top cover with C.C(1:2:4) with 12mm size hbg metal & MS Rod 0.85qntl per 1 cum and with 12mm thick cement plaster (1:4)complete in all respect as per the direction of the Engineer-in-charge. |
| 145 | SluiceValve/NR Valve Chamber (Size 0.90mtr x 0.90 mtr x 1.15 mtr) |
| 146 | Air Valve Chamber(Size 0.75mtr x 0.75mtr x 1.15mtr) |
| 147 | Supplying all labour, T&P and dismantling of concrete road/Metalled road/Asphalt roads for laying of pipe line and making good to the damagesas per approved design and specification. |
| 148 | Supplying all wirks labour T&P for making of concrete road with CC(1:4:8) work using 4 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respect as per specification and direction of the Engineer in Charge. |
| 149 | Supplying all wirks labour T&P for making of concrete road with CC(1:2:4) work using 12 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respect as per specification and direction of the Engineer in Charge. |
| 150 | Supplying all labour T&P laying of pipe line to each house hold including cost of PVC/GI pipe, saddle of required size, 1/8\"(3mm) brass ferrule and bib cock at the end of supply line including excavation trenches and making good the damages etc complet as per direction of Engineer in Charge as approved design and specification. |
| 151 | Along the pipe line |
| 152 | Opposie side of pipe line |
| 153 | Supplying all wirks labour T&P for making of platform of size(0.45x0.45x0.10) for FHTC with CC(1:2:4) work using 12 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respectas per specification and direction of the Engineer in Charge. |
| 154 | Supplying all labour T&P and materials such as 1000 liter capacity syntex tank, GI pipe of 15 mm 20 mm 25 mm size of medium quality with ferrule cock , FWV etc for water supply to AWC, UP School, GP office, medical etc with provision of staging for PVC tank complete. (Detailed estimateattached) |
| 155 | Supplying all labour Materials, T&P for construction of MS display board 1.50m x 1.20 m etc. Complete as per direction of the Engineer-in-Charge. |
| 156 | CONSTRUCTION OF PUMP HOUSE |
| 157 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soilwith all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 158 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 159 | Providing cement concrete M-25 for RCC work with 20mm and down gred size hg chips including hoisting and laying etc. complete excluding cost of MS rod including rigid and smoth centering and shuttering for RCC work includingfalse works and dismentaling after casting as per direction of Engineer-in-charge. |
| 160 | RCC Column & Beam |
| 161 | Supplying, filling in foundation & plinth with sand in 15cms. (9\") thick layers with the cost conveyance royalties, taxes of the materials complete as per specification and direction of the Engineer-in-charge |
| 162 | Supplying all materials, labour, T&P and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 163 | Supplying all materials, labour, T&P and providing Brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 164 | Supplying all materials, labour T&P providing R.C.C. (1:2:4) workusing 12mmsize hard black hand broken granite stone chipsincluding cost conveyance taxes and royalty of all materials and labour with T&P required for the work etc, complete in all respect but excluding cost of MS Rods or Tor Steel and binding wires of 18 to 20 gauge as perincluding the cost of required quantity of centering and shuttering as per the dirction of the Engineer in Charge. |
| 165 | Lintel |
| 166 | Chajja |
| 167 | Beam |
| 168 | Slab |
| 169 | Straightening bend up or coiled rods cutting bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor Steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works including cost, conveyance and taxes of M.S. Rods or Tor Steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc, complete in all floors as per specification and direction of the Engineer-in-charge. |
| 170 | Cost of M.S doors and windows: |
| 171 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per specification and direction of the Engineer-in-charge. |
| 172 | Supplying all materials, labour, T&P and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 173 | Supplying all materials, labour, T&P and providing C.C. (1:2:4) workusing 12mmsize hard black broken granite stone chips including cost, conveyance, royalty & taxesetc, complete in all respect but excluding cost of M.S. Rods or Tor Steel and binding wires of 18 to 20 gaugeas per specification and direction of the Engineer-in-charge. |
| 174 | Providing, fixing tiles in dados skirting and risers of steps on 12mm. thick cement plaster(1:3) jpinted with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge. |
| 175 | Providing & fixing (Glazed) tiles in all floor & treads of steps & landing on 25 mm thick bed of cement mortar in proportion (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge. |
| 176 | Supplying all materials, labour, T&P and providing 20mm (3/4\") thick cement plaster (1:6) finished smooth to out side of stone work after raking out the joint including, watering and curing with cost and conveyance of all materials and labour with T&P ,all taxes and royalties etc., complete in all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 177 | Supplying all material, labour, T&P and providing grading concrete with C.C(1:2:2) using 06mm. Size hard stone broken chips of approved quality including hpisting and laying not exceeding 25mm. thick with proper packing and required slope, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect as per specification and direction of the Engineer-in-charge. |
| 178 | Supplying all labour, T&P and materials and finishing walls withtwo coats of weather coat over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 179 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 180 | CONSTRUCTION OF COMPOUND WALL FOR PUMP HOUSE |
| 181 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 182 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 183 | Supplying all labour, T&P and materials and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 184 | Supplying all labour, T&P and materials and providing 1\" thick D.P.C. over stone metal with cost, conveyance, tax, royalty of materials required and as per specification and direction of the Engineer-in-charge. |
| 185 | Supplying all labour, T&P and materials and providing brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 186 | Cost of MS Grill Gate |
| 187 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per the direction of the Engineer-in-charge |
| 188 | Supplying all labour, T&P and materials and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 189 | Supplying all labour, T&P and materials and providing 20mm. thick cement plaster in cement mortar (1:6) for stone workand conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 190 | Supplying all labour, T&P and materials and finishing walls withweather coat of approvedpaint over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 191 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 192 | PUMPING UNIT |
| 193 | Supplying installing, testing & commissioning of suitableVerticalSumersible pumping set of any repurted make such as KSB/Crompton/Greaves/ Kirloskar CRI/Suguna etc with energy efficient motor with ISI mark to run in3 phase AC supply capble to discharge clear water from Production well @3.00 Lps against a total head of 110 mtrs. etc. All complete as per direction of Engineer in Charge. |
| 194 | Supplying Testing ,and installation of suitable control pannel Boardfor suitablesubmerssible pump and motor set with reputed ISI make. |
| 195 | Make BCH/L & T/Havels |
| 196 | Supplying, fitting & testing of 4mm2 three core flat submerssible electric cable reputed ISI make Finolex/BCH/Havells |
| 197 | Required assessories like G.I R/S, stainless Steel nipple, G.I bend,wire ropw allof heavy quality with M.S calmp, MS bore cover etc. as required at site to complete the installation of the pimp set etc.complete in all respect. |
| 198 | Supplying of 50 mm dia HDPE suction pipe for lowering of pump & motors etc |
| 199 | SITE DEVELOPMENT |
| 200 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 201 | In all kinds of soil : |
| 202 | INTERNAL ELECTRIFICATION |
| 203 | Supplying the following materials ,required labour and T &P and providing internal electrification to pump house as required at site including commisioning and testing as per the direction of the Engineer in Charge. |
| 204 | Surface wiring to light point in 20mm dia PVC cond. Pipe on MS board wiyh 3mm thick mulltistand copper wire. |
| 205 | Short point |
| 206 | Medium point |
| 207 | Surface wiring to 3pin 5A plug point in 20m dia pvc conduit on existing board . |
| 208 | surface wiring to 3pin 5A plug point in 20m dia pvc conduit on existing board . |
| 209 | Medium point |
| 210 | B.H. Fitting including all connection. |
| 211 | 63 AMP 440 V ICTPN main switch |
| 212 | 3 nos 63 Amp kitkat fuse on MS Board. |
| 213 | 32 Amp main switch with all connections |
| 214 | Sub- main wiring 4 x 4mm2 copper wire with in 20mm dia pvc conduit. |
| 215 | Sub- main wiring 2 x 2.5mm2 copper wire with in 20mm dia pvc conduit. |
| 216 | Standard earthing in 38mm dia 3mtr long GI pipe with No 8 GI wire including all connections. |
| 217 | 4\" x 40 W F.L. Fitting complete with tube. |
| 218 | 25 x 5 mm thick iron FL frame covered with GI sheet with painting , ( 6.5 ft x 2.5 ft ) embeded on wall with all consumable materials like cement chips painting etc including all connections with PVC paint, flexible pipe,copper cable etc. |
| 219 | 15 Amp switch and socket on 10 x 12 size MS board with all connections |
| 220 | RYB phase indicator with control 5 Amp F.T. switch with all connection. |
| 221 | 5 Amp plug point on separate board fixed with 7\" x 4\" MS box with lylem cover with necessary connection. |
| 222 | Short point |
| 223 | 10mm2 4 core cable |
| 224 | Ceiling Fan |
| 225 | 5YEAR OPERATION & MAINTENANCE |
| 226 | CostofOpernation & maintenance as per term & condition and technical specification mentioned in SBD. |
| 227 | PIPEWATER SUPPLY TOTANGINI (SIDIPADU & MADABALASA) (ZONE-3) |
| 228 | CONSTRUCTION OF 20,000 LTR RCC OGR |
| 229 | Designing , construction, testing and commissioning of 20,000 ltr capacity circular shape flat bottom with domb shape RCCon the groundreservoir including supplying , fitting, fixing of M.S and aluminuim ladder ,water level indicator, lightening arrester 1 nos. 80 mm CI puddle collar-4, 2 nos. CI MH cover, Inlet & Outlet arrangement with 80 mm dia GI pipe - 12 mtr and soil testing & drawing design etc. testing of the joints all complete fitting and fixing,80 CI sluice valves-1 No, Sluice valve chamber -1 nosof standard make providing CC M-25 for RCC work with 20mm& down grade size hg chips with 20mm thick cement plater over the cement concrete work, cement punning over plaster surface and painting 2 coats of water proofingweather coat etc. all complete as per approved drawing and design as per direction of Engineer-in-Charge. |
| 230 | CONSTRUCTION OF COMPOUND WALL AROUND THE OGR |
| 231 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 232 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 233 | Supplying all labour, T&P and materials and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 234 | Supplying all labour, T&P and materials and providing 1\" thick D.P.C. over stone metal with cost, conveyance, tax, royalty of materials required and as per specification and direction of the Engineer-in-charge. |
| 235 | Supplying all labour, T&P and materials and providing brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 236 | Cost of MS Grill Gate |
| 237 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per the direction of the Engineer-in-charge |
| 238 | Supplying all labour, T&P and materials and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 239 | Supplying all labour, T&P and materials and providing 20mm. thick cement plaster in cement mortar (1:6) for stone workand conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 240 | Supplying all labour, T&P and materials and finishing walls withweather coat of approvedpaint over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 241 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 242 | LAYING OF RISINGMAIN & DISTRIBUTION SYSTEM |
| 243 | Earth work in excavation of trenches for laying of pipe line including dressing, leveling the bed upto required depth & within initial lead of 50mtrs & 1.5mtrs initial lift breaking clods to maximum size (5 to 7cm) laying in layers not exceeding 0.30mtrs in depth etc. complete including cost of all labour, T&P, pipes, fittings and specials etc.required for completion of the item as per specification & direction of Engineer in charge. |
| 244 | In all kind of Soil : (1100 mtr x 0.38mtr x 0.90mtr) |
| 245 | In Stoney Earth : (1100 mtr x 0.38mtr x 0.90mtr) |
| 246 | Transporting and supplying all materials, labour T&P, fabricating, fitting and fixing with specials at the site using Electric resistance welded pipes of reputed make (TATA /Zindal ), confirming to IS 1239 (P-1) 2004, IS 1978 & IS 3598, medium quality & standard weight, including cutting the pipes & flanges, drilling the bolt holes in the flanges, matching the pipes and flanges and jointing with proper gradient & alignment, welding with arc welding using electrodes with power generated by using mobile diesel generator set, etc. complete as per direction of Engineer in charge, including painting two coats with black anti-corrosive paint over one coat of primer, all cost, conveyance, taxes of paints, cost of fittings as \"T\", Bend, Offsets, Nuts and bolts, Leather packing etc. but including the cost of flanges and required earthwork, cutting holes in masonry works etc. |
| 247 | 80 mm dia G.I pipe |
| 248 | Supplying all materials including HDPE pipes, fittings and specials, labour, T&P for laying in trenches unplasticised HDPEpipes of the following outside diameter for all classes and specials as required at site, including jointing with solvent cement by non heat application method excluding the cost of earth work in excavation but including the cost of pipescost of fitting and specials& testing the pipe line etc. all complete as per direction of Engineer-in-charge. |
| 249 | 90 mm HDPEPipe PE-80 PN-6 |
| 250 | Supplying all labour, T&P for filling excavated earth in the pipe line trenches by laying in layers not exceding 9\" (225mm) including watering and ramming as per the directionEngineer-in-charge. |
| 251 | In all kinds of soil : |
| 252 | In Stoney Earth : |
| 253 | Supplying all labour T&P fitting and fixing of CI sluice valves with double flanged ends in the water line for controlling purposes conforming to IS:14846-2000 for the following rating and nominal diameters as per specifications complete of approved make with supply of all joining materials, T&P etc all complete including testing as per specicication complete |
| 254 | 80 mm dia CI Sluice Valve IS- 14846/2000 PN-1.00 |
| 255 | 80 mm dia CI NR Valve IS- 14846/2000 PN-1.00 |
| 256 | 15 mm dia CISingle Air Valve IS 14845/2000 |
| 257 | Supplying all labour, material, T&P and constructing brick masonry valve chambers of following mentioned inetrnal dimension, complete with C.C (1:4:8) with 40 mm size hbg metal at the bottom, C.B brick masonry in c.m(1:4) with internal plastering and R.C.C top cover with C.C(1:2:4) with 12mm size hbg metal & MS Rod 0.85qntl per 1 cum and with 12mm thick cement plaster (1:4)complete in all respect as per the direction of the Engineer-in-charge. |
| 258 | SluiceValve/NR Valve Chamber (Size 0.90mtr x 0.90 mtr x 1.15 mtr) |
| 259 | Air Valve Chamber(Size 0.75mtr x 0.75mtr x 1.15mtr) |
| 260 | Supplying all labour, T&P and dismantling of concrete road/Metalled road/Asphalt roads for laying of pipe line and making good to the damagesas per approved design and specification. |
| 261 | Supplying all wirks labour T&P for making of concrete road with CC(1:4:8) work using 4 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respect as per specification and direction of the Engineer in Charge. |
| 262 | Supplying all wirks labour T&P for making of concrete road with CC(1:2:4) work using 12 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respect as per specification and direction of the Engineer in Charge. |
| 263 | Supplying all labour T&P laying of pipe line to each house hold including cost of PVC/GI pipe, saddle of required size, 1/8\"(3mm) brass ferrule and bib cock at the end of supply line including excavation trenches and making good the damages etc complet as per direction of Engineer in Charge as approved design and specification. |
| 264 | Along the pipe line |
| 265 | Opposie side of pipe line |
| 266 | Supplying all wirks labour T&P for making of platform of size(0.45x0.45x0.10) for FHTC with CC(1:2:4) work using 12 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respectas per specification and direction of the Engineer in Charge. |
| 267 | Supplying all labour T&P and materials such as 1000 liter capacity syntex tank, GI pipe of 15 mm 20 mm 25 mm size of medium quality with ferrule cock , FWV etc for water supply to AWC, UP School, GP office, medical etc with provision of staging for PVC tank complete. (Detailed estimateattached) |
| 268 | Supplying all labour Materials, T&P for construction of MS display board 1.50m x 1.20 m etc. Complete as per direction of the Engineer-in-Charge. |
| 269 | CONSTRUCTION OF PUMP HOUSE |
| 270 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soilwith all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 271 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 272 | Providing cement concrete M-25 for RCC work with 20mm and down gred size hg chips including hoisting and laying etc. complete excluding cost of MS rod including rigid and smoth centering and shuttering for RCC work includingfalse works and dismentaling after casting as per direction of Engineer-in-charge. |
| 273 | RCC Column & Beam |
| 274 | Supplying, filling in foundation & plinth with sand in 15cms. (9\") thick layers with the cost conveyance royalties, taxes of the materials complete as per specification and direction of the Engineer-in-charge |
| 275 | Supplying all materials, labour, T&P and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 276 | Supplying all materials, labour, T&P and providing Brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 277 | Supplying all materials, labour T&P providing R.C.C. (1:2:4) workusing 12mmsize hard black hand broken granite stone chipsincluding cost conveyance taxes and royalty of all materials and labour with T&P required for the work etc, complete in all respect but excluding cost of MS Rods or Tor Steel and binding wires of 18 to 20 gauge as perincluding the cost of required quantity of centering and shuttering as per the dirction of the Engineer in Charge. |
| 278 | Lintel |
| 279 | Chajja |
| 280 | Beam |
| 281 | Slab |
| 282 | Straightening bend up or coiled rods cutting bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor Steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works including cost, conveyance and taxes of M.S. Rods or Tor Steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc, complete in all floors as per specification and direction of the Engineer-in-charge. |
| 283 | Cost of M.S doors and windows: |
| 284 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per specification and direction of the Engineer-in-charge. |
| 285 | Supplying all materials, labour, T&P and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 286 | Supplying all materials, labour, T&P and providing C.C. (1:2:4) workusing 12mmsize hard black broken granite stone chips including cost, conveyance, royalty & taxesetc, complete in all respect but excluding cost of M.S. Rods or Tor Steel and binding wires of 18 to 20 gaugeas per specification and direction of the Engineer-in-charge. |
| 287 | Providing, fixing tiles in dados skirting and risers of steps on 12mm. thick cement plaster(1:3) jpinted with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge. |
| 288 | Providing & fixing (Glazed) tiles in all floor & treads of steps & landing on 25 mm thick bed of cement mortar in proportion (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge. |
| 289 | Supplying all materials, labour, T&P and providing 20mm (3/4\") thick cement plaster (1:6) finished smooth to out side of stone work after raking out the joint including, watering and curing with cost and conveyance of all materials and labour with T&P ,all taxes and royalties etc., complete in all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 290 | Supplying all material, labour, T&P and providing grading concrete with C.C(1:2:2) using 06mm. Size hard stone broken chips of approved quality including hpisting and laying not exceeding 25mm. thick with proper packing and required slope, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect as per specification and direction of the Engineer-in-charge. |
| 291 | Supplying all labour, T&P and materials and finishing walls withtwo coats of weather coat over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 292 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 293 | CONSTRUCTION OF COMPOUND WALL FOR PUMP HOUSE |
| 294 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 295 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 296 | Supplying all labour, T&P and materials and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 297 | Supplying all labour, T&P and materials and providing 1\" thick D.P.C. over stone metal with cost, conveyance, tax, royalty of materials required and as per specification and direction of the Engineer-in-charge. |
| 298 | Supplying all labour, T&P and materials and providing brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 299 | Cost of MS Grill Gate |
| 300 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per the direction of the Engineer-in-charge |
| 301 | Supplying all labour, T&P and materials and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 302 | Supplying all labour, T&P and materials and providing 20mm. thick cement plaster in cement mortar (1:6) for stone workand conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 303 | Supplying all labour, T&P and materials and finishing walls withweather coat of approvedpaint over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 304 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 305 | PUMPING UNIT |
| 306 | Supplying installing, testing & commissioning of suitableVerticalSumersible pumping set of any repurted make such as KSB/Crompton/Greaves/ Kirloskar CRI/Suguna etc with energy efficient motor with ISI mark to run in3 phase AC supply capble to discharge clear water from Production well @2.82 Lps against a total head of 90 mtrs. etc. All complete as per direction of Engineer in Charge. |
| 307 | Supplying Testing ,and installation of suitable control pannel Boardfor suitablesubmerssible pump and motor set with reputed ISI make. |
| 308 | Make BCH/L & T/Havels |
| 309 | Supplying, fitting & testing of 4mm2 three core flat submerssible electric cable reputed ISI make Finolex/BCH/Havells |
| 310 | Required assessories like G.I R/S, stainless Steel nipple, G.I bend,wire ropw allof heavy quality with M.S calmp, MS bore cover etc. as required at site to complete the installation of the pimp set etc.complete in all respect. |
| 311 | Supplying of 50 mm dia HDPE suction pipe for lowering of pump & motors etc |
| 312 | SITE DEVELOPMENT |
| 313 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 314 | In all kinds of soil : |
| 315 | INTERNAL ELECTRIFICATION |
| 316 | Supplying the following materials ,required labour and T &P and providing internal electrification to pump house as required at site including commisioning and testing as per the direction of the Engineer in Charge. |
| 317 | Surface wiring to light point in 20mm dia PVC cond. Pipe on MS board wiyh 3mm thick mulltistand copper wire. |
| 318 | Short point |
| 319 | Medium point |
| 320 | Surface wiring to 3pin 5A plug point in 20m dia pvc conduit on existing board . |
| 321 | surface wiring to 3pin 5A plug point in 20m dia pvc conduit on existing board . |
| 322 | Medium point |
| 323 | B.H. Fitting including all connection. |
| 324 | 63 AMP 440 V ICTPN main switch |
| 325 | 3 nos 63 Amp kitkat fuse on MS Board. |
| 326 | 32 Amp main switch with all connections |
| 327 | Sub- main wiring 4 x 4mm2 copper wire with in 20mm dia pvc conduit. |
| 328 | Sub- main wiring 2 x 2.5mm2 copper wire with in 20mm dia pvc conduit. |
| 329 | Standard earthing in 38mm dia 3mtr long GI pipe with No 8 GI wire including all connections. |
| 330 | 4\" x 40 W F.L. Fitting complete with tube. |
| 331 | 25 x 5 mm thick iron FL frame covered with GI sheet with painting , ( 6.5 ft x 2.5 ft ) embeded on wall with all consumable materials like cement chips painting etc including all connections with PVC paint, flexible pipe,copper cable etc. |
| 332 | 15 Amp switch and socket on 10 x 12 size MS board with all connections |
| 333 | RYB phase indicator with control 5 Amp F.T. switch with all connection. |
| 334 | 5 Amp plug point on separate board fixed with 7\" x 4\" MS box with lylem cover with necessary connection. |
| 335 | Short point |
| 336 | 10mm2 4 core cable |
| 337 | Ceiling Fan |
| 338 | 5YEAR OPERATION & MAINTENANCE |
| 339 | CostofOpernation & maintenance as per term & condition and technical specification mentioned in SBD. |
| 340 | PIPEWATER SUPPLY TOTANGINI (BADAPADU & KHAMBAPADU) (ZONE-4) |
| 341 | CONSTRUCTION OF 20,000 LTR RCC OGR |
| 342 | Designing , construction, testing and commissioning of 20,000 ltr capacity circular shape flat bottom with domb shape RCCon the groundreservoir including supplying , fitting, fixing of M.S and aluminuim ladder ,water level indicator, lightening arrester 1 nos. 80 mm CI puddle collar-4, 2 nos. CI MH cover, Inlet & Outlet arrangement with 80 mm dia GI pipe - 12 mtr and soil testing & drawing design etc. testing of the joints all complete fitting and fixing,80 CI sluice valves-1 No, Sluice valve chamber -1 nosof standard make providing CC M-25 for RCC work with 20mm& down grade size hg chips with 20mm thick cement plater over the cement concrete work, cement punning over plaster surface and painting 2 coats of water proofingweather coat etc. all complete as per approved drawing and design as per direction of Engineer-in-Charge. |
| 343 | CONSTRUCTION OF COMPOUND WALL AROUND THE OGR |
| 344 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 345 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 346 | Supplying all labour, T&P and materials and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 347 | Supplying all labour, T&P and materials and providing 1\" thick D.P.C. over stone metal with cost, conveyance, tax, royalty of materials required and as per specification and direction of the Engineer-in-charge. |
| 348 | Supplying all labour, T&P and materials and providing brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 349 | Cost of MS Grill Gate |
| 350 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per the direction of the Engineer-in-charge |
| 351 | Supplying all labour, T&P and materials and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 352 | Supplying all labour, T&P and materials and providing 20mm. thick cement plaster in cement mortar (1:6) for stone workand conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 353 | Supplying all labour, T&P and materials and finishing walls withweather coat of approvedpaint over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 354 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 355 | LAYING OF RISINGMAIN & DISTRIBUTION SYSTEM |
| 356 | Earth work in excavation of trenches for laying of pipe line including dressing, leveling the bed upto required depth & within initial lead of 50mtrs & 1.5mtrs initial lift breaking clods to maximum size (5 to 7cm) laying in layers not exceeding 0.30mtrs in depth etc. complete including cost of all labour, T&P, pipes, fittings and specials etc.required for completion of the item as per specification & direction of Engineer in charge. |
| 357 | In all kind of Soil : (1120 mtr x 0.38mtr x 0.90mtr) |
| 358 | In Stoney Earth : (1170 mtr x 0.38mtr x 0.90mtr) |
| 359 | Transporting and supplying all materials, labour T&P, fabricating, fitting and fixing with specials at the site using Electric resistance welded pipes of reputed make (TATA /Zindal ), confirming to IS 1239 (P-1) 2004, IS 1978 & IS 3598, medium quality & standard weight, including cutting the pipes & flanges, drilling the bolt holes in the flanges, matching the pipes and flanges and jointing with proper gradient & alignment, welding with arc welding using electrodes with power generated by using mobile diesel generator set, etc. complete as per direction of Engineer in charge, including painting two coats with black anti-corrosive paint over one coat of primer, all cost, conveyance, taxes of paints, cost of fittings as \"T\", Bend, Offsets, Nuts and bolts, Leather packing etc. but including the cost of flanges and required earthwork, cutting holes in masonry works etc. |
| 360 | 80 mm dia G.I pipe |
| 361 | Supplying all materials including HDPE pipes, fittings and specials, labour, T&P for laying in trenches unplasticised HDPEpipes of the following outside diameter for all classes and specials as required at site, including jointing with solvent cement by non heat application method excluding the cost of earth work in excavation but including the cost of pipescost of fitting and specials& testing the pipe line etc. all complete as per direction of Engineer-in-charge. |
| 362 | 90 mm HDPEPipe PE-80 PN-6 |
| 363 | Supplying all labour, T&P for filling excavated earth in the pipe line trenches by laying in layers not exceding 9\" (225mm) including watering and ramming as per the directionEngineer-in-charge. |
| 364 | In all kinds of soil : |
| 365 | In Stoney Earth : |
| 366 | Supplying all labour T&P fitting and fixing of CI sluice valves with double flanged ends in the water line for controlling purposes conforming to IS:14846-2000 for the following rating and nominal diameters as per specifications complete of approved make with supply of all joining materials, T&P etc all complete including testing as per specicication complete |
| 367 | 80 mm dia CI Sluice Valve IS- 14846/2000 PN-1.00 |
| 368 | 80 mm dia CI NR Valve IS- 14846/2000 PN-1.00 |
| 369 | 15 mm dia CISingle Air Valve IS 14845/2000 |
| 370 | Supplying all labour, material, T&P and constructing brick masonry valve chambers of following mentioned inetrnal dimension, complete with C.C (1:4:8) with 40 mm size hbg metal at the bottom, C.B brick masonry in c.m(1:4) with internal plastering and R.C.C top cover with C.C(1:2:4) with 12mm size hbg metal & MS Rod 0.85qntl per 1 cum and with 12mm thick cement plaster (1:4)complete in all respect as per the direction of the Engineer-in-charge. |
| 371 | SluiceValve/NR Valve Chamber (Size 0.90mtr x 0.90 mtr x 1.15 mtr) |
| 372 | Air Valve Chamber(Size 0.75mtr x 0.75mtr x 1.15mtr) |
| 373 | Supplying all labour, T&P and dismantling of concrete road/Metalled road/Asphalt roads for laying of pipe line and making good to the damagesas per approved design and specification. |
| 374 | Supplying all wirks labour T&P for making of concrete road with CC(1:4:8) work using 4 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respect as per specification and direction of the Engineer in Charge. |
| 375 | Supplying all wirks labour T&P for making of concrete road with CC(1:2:4) work using 12 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respect as per specification and direction of the Engineer in Charge. |
| 376 | Supplying all labour T&P laying of pipe line to each house hold including cost of PVC/GI pipe, saddle of required size, 1/8\"(3mm) brass ferrule and bib cock at the end of supply line including excavation trenches and making good the damages etc complet as per direction of Engineer in Charge as approved design and specification. |
| 377 | Along the pipe line |
| 378 | Opposie side of pipe line |
| 379 | Supplying all wirks labour T&P for making of platform of size(0.45x0.45x0.10) for FHTC with CC(1:2:4) work using 12 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respectas per specification and direction of the Engineer in Charge. |
| 380 | Supplying all labour T&P and materials such as 1000 liter capacity syntex tank, GI pipe of 15 mm 20 mm 25 mm size of medium quality with ferrule cock , FWV etc for water supply to AWC, UP School, GP office, medical etc with provision of staging for PVC tank complete. (Detailed estimateattached) |
| 381 | Supplying all labour Materials, T&P for construction of MS display board 1.50m x 1.20 m etc. Complete as per direction of the Engineer-in-Charge. |
| 382 | CONSTRUCTION OF PUMP HOUSE |
| 383 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soilwith all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 384 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 385 | Providing cement concrete M-25 for RCC work with 20mm and down gred size hg chips including hoisting and laying etc. complete excluding cost of MS rod including rigid and smoth centering and shuttering for RCC work includingfalse works and dismentaling after casting as per direction of Engineer-in-charge. |
| 386 | RCC Column & Beam |
| 387 | Supplying, filling in foundation & plinth with sand in 15cms. (9\") thick layers with the cost conveyance royalties, taxes of the materials complete as per specification and direction of the Engineer-in-charge |
| 388 | Supplying all materials, labour, T&P and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 389 | Supplying all materials, labour, T&P and providing Brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 390 | Supplying all materials, labour T&P providing R.C.C. (1:2:4) workusing 12mmsize hard black hand broken granite stone chipsincluding cost conveyance taxes and royalty of all materials and labour with T&P required for the work etc, complete in all respect but excluding cost of MS Rods or Tor Steel and binding wires of 18 to 20 gauge as perincluding the cost of required quantity of centering and shuttering as per the dirction of the Engineer in Charge. |
| 391 | Lintel |
| 392 | Chajja |
| 393 | Beam |
| 394 | Slab |
| 395 | Straightening bend up or coiled rods cutting bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor Steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works including cost, conveyance and taxes of M.S. Rods or Tor Steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc, complete in all floors as per specification and direction of the Engineer-in-charge. |
| 396 | Cost of M.S doors and windows: |
| 397 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per specification and direction of the Engineer-in-charge. |
| 398 | Supplying all materials, labour, T&P and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 399 | Supplying all materials, labour, T&P and providing C.C. (1:2:4) workusing 12mmsize hard black broken granite stone chips including cost, conveyance, royalty & taxesetc, complete in all respect but excluding cost of M.S. Rods or Tor Steel and binding wires of 18 to 20 gaugeas per specification and direction of the Engineer-in-charge. |
| 400 | Providing, fixing tiles in dados skirting and risers of steps on 12mm. thick cement plaster(1:3) jpinted with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge. |
| 401 | Providing & fixing (Glazed) tiles in all floor & treads of steps & landing on 25 mm thick bed of cement mortar in proportion (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge. |
| 402 | Supplying all materials, labour, T&P and providing 20mm (3/4\") thick cement plaster (1:6) finished smooth to out side of stone work after raking out the joint including, watering and curing with cost and conveyance of all materials and labour with T&P ,all taxes and royalties etc., complete in all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 403 | Supplying all material, labour, T&P and providing grading concrete with C.C(1:2:2) using 06mm. Size hard stone broken chips of approved quality including hpisting and laying not exceeding 25mm. thick with proper packing and required slope, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect as per specification and direction of the Engineer-in-charge. |
| 404 | Supplying all labour, T&P and materials and finishing walls withtwo coats of weather coat over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 405 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 406 | PUMPING UNIT |
| 407 | Supplying installing, testing & commissioning of suitableHorizontalSumersible pumping set of any repurted make such as KSB/Crompton/Greaves/ Kirloskar CRI/Suguna etc with energy efficient motor with ISI mark to run in3 phase AC supply capble to discharge clear water from Production well @3.00 Lps against a total head of 110 mtrs. etc. All complete as per direction of Engineer in Charge. |
| 408 | Supplying Testing ,and installation of suitable control pannel Boardfor suitablesubmerssible pump and motor set with reputed ISI make. |
| 409 | Make BCH/L & T/Havels |
| 410 | Supplying, fitting & testing of 6mm2 three core flat submerssible electric cable reputed ISI make Finolex/BCH/Havells |
| 411 | Required assessories like G.I R/S, stainless Steel nipple, G.I bend,wire ropw allof heavy quality with M.S calmp, MS bore cover etc. as required at site to complete the installation of the pimp set etc.complete in all respect. |
| 412 | Supplying of 50 mm dia HDPE suction pipe for lowering of pump & motors etc |
| 413 | SITE DEVELOPMENT |
| 414 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 415 | In all kinds of soil : |
| 416 | PERCOLATION WELL 6M DIA WITH MS COVER |
| 417 | Earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the E-I-C. below bed level. |
| 418 | In all kind of Soil: |
| 419 | 1st depth of 1.50 Mtr |
| 420 | 2nd depth of 1.50 Mtr |
| 421 | 3rd depth of 1.50 Mtr |
| 422 | 4th depth of 1.50 Mtr |
| 423 | 5th depth of 1.50 Mtr |
| 424 | 6th depth of 1.50 Mtr |
| 425 | 7th depth of 1.50 Mtr |
| 426 | 8th depth of 1.50 Mtr |
| 427 | 9th depth of 1.50 Mtr |
| 428 | Supplying all materials, labour, T&P providing rough dry Stone packingwith granite stone of 15cm. to 30cm (1 cuft) and above weighing 140 lbs. to 160 lbs./cuft quarried, free from weathered surface of approved quarry including splays cutting, moulding where necessary & including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 429 | Supplying all labour, T&P and materials and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 430 | Supplying all materials, labour T&P providing R.C.C. (1:2:4) workusing 12mmsize hard black hand broken granite stone chips of approved quality and from approved quarry including hoisting lowering laying and compacting concrete watering and curing for four weeks, finishing the exposed surface smoothincluding cost conveyance taxes and royalty of all materials and labour with T&P required for the work etc, complete in all respect .as per specification and direction of the Engineer-in-charge. |
| 431 | Supplying all materials, labour T&P and providngrigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including cost of materials etc. |
| 432 | Straightening bend up or coiled rods cutting bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor Steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works including cost, conveyance and taxes of M.S. Rods or Tor Steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc, complete in all floors as per specification and direction of the Engineer-in-charge. |
| 433 | Supplying all labour, materials, T&P for 20mm (3/4\") thick cement plaster (1:6) finished smoothafter raking out the joint including, watering and curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalties etc. complete as per the direction of the Engineer-in-charge. |
| 434 | Supplying all labour, materials, T&P for providing cement flush pointing in CM (1:3) to stone workincluding, watering and curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalties etc. complete as per the direction of the Engineer-in-charge. |
| 435 | Supplying all labour, T&P for filling excavated earth in the pipe line trenches by laying in layers not exceding 9\" (225mm) including watering and ramming as per the directionEngineer-in-charge. |
| 436 | Supplying all materials labour T&P and welding machinefor making cover of the dry R.R. masoanry well with MS plate of 16 gauge including fixing of 100x100 mm angle iron main supportand cross supports etc., all complete including painting the cover with anti corrosive paint and fixing rigidly to the top of well staining with provision of chain pully stand and door at the topbelow the pully stand including locking arrangement etc., all complete. as per direction of Engineer-in-charge. |
| 437 | Supplying alllabour, T&P for dewateriang during excavation and staining works with hire charges of pumping set etc. all complete as per the direction of Engineer in charge. |
| 438 | Supplying all materials, labour T&P for providing cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metal of approved quality from approved quarry including hoisting and laying not exceeding 150mm. thick with proper packing including curring,shuttering if necessarywith cost, conveyance, royalty, taxes of all materials required for the work includingT&P articles finishing the exposed surface smooth as per specification & direction of the Engineer-in-charge. |
| 439 | INTERNAL ELECTRIFICATION |
| 440 | Supplying the following materials ,required labour and T &P and providing internal electrification to pump house as required at site including commisioning and testing as per the direction of the Engineer in Charge. |
| 441 | Surface wiring to light point in 20mm dia PVC cond. Pipe on MS board wiyh 3mm thick mulltistand copper wire. |
| 442 | Short point |
| 443 | Medium point |
| 444 | Surface wiring to 3pin 5A plug point in 20m dia pvc conduit on existing board . |
| 445 | surface wiring to 3pin 5A plug point in 20m dia pvc conduit on existing board . |
| 446 | Medium point |
| 447 | B.H. Fitting including all connection. |
| 448 | 63 AMP 440 V ICTPN main switch |
| 449 | 3 nos 63 Amp kitkat fuse on MS Board. |
| 450 | 32 Amp main switch with all connections |
| 451 | Sub- main wiring 4 x 4mm2 copper wire with in 20mm dia pvc conduit. |
| 452 | Sub- main wiring 2 x 2.5mm2 copper wire with in 20mm dia pvc conduit. |
| 453 | Standard earthing in 38mm dia 3mtr long GI pipe with No 8 GI wire including all connections. |
| 454 | 4\" x 40 W F.L. Fitting complete with tube. |
| 455 | 25 x 5 mm thick iron FL frame covered with GI sheet with painting , ( 6.5 ft x 2.5 ft ) embeded on wall with all consumable materials like cement chips painting etc including all connections with PVC paint, flexible pipe,copper cable etc. |
| 456 | 15 Amp switch and socket on 10 x 12 size MS board with all connections |
| 457 | RYB phase indicator with control 5 Amp F.T. switch with all connection. |
| 458 | 5 Amp plug point on separate board fixed with 7\" x 4\" MS box with lylem cover with necessary connection. |
| 459 | Short point |
| 460 | 10mm2 4 core cable |
| 461 | Ceiling Fan |
| 462 | 5YEAR OPERATION & MAINTENANCE |
| 463 | CostofOpernation & maintenance as per term & condition and technical specification mentioned in SBD. |
| 464 | PIPEWATER SUPPLY TOTANGINI (MIRIALPADU) (ZONE-5) |
| 465 | CONSTRUCTION OF 20,000 LTR RCC OGR |
| 466 | Designing , construction, testing and commissioning of 20,000 ltr capacity circular shape flat bottom with domb shape RCCon the groundreservoir including supplying , fitting, fixing of M.S and aluminuim ladder ,water level indicator, lightening arrester 1 nos. 80 mm CI puddle collar-4, 2 nos. CI MH cover, Inlet & Outlet arrangement with 80 mm dia GI pipe - 12 mtr and soil testing & drawing design etc. testing of the joints all complete fitting and fixing,80 CI sluice valves-1 No, Sluice valve chamber -1 nosof standard make providing CC M-25 for RCC work with 20mm& down grade size hg chips with 20mm thick cement plater over the cement concrete work, cement punning over plaster surface and painting 2 coats of water proofingweather coat etc. all complete as per approved drawing and design as per direction of Engineer-in-Charge. |
| 467 | CONSTRUCTION OF COMPOUND WALL FOR OGR |
| 468 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 469 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 470 | Supplying all labour, T&P and materials and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 471 | Supplying all labour, T&P and materials and providing 1\" thick D.P.C. over stone metal with cost, conveyance, tax, royalty of materials required and as per specification and direction of the Engineer-in-charge. |
| 472 | Supplying all labour, T&P and materials and providing brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 473 | Cost of MS Grill Gate |
| 474 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per the direction of the Engineer-in-charge |
| 475 | Supplying all labour, T&P and materials and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 476 | Supplying all labour, T&P and materials and providing 20mm. thick cement plaster in cement mortar (1:6) for stone workand conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 477 | Supplying all labour, T&P and materials and finishing walls withweather coat of approvedpaint over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 478 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 479 | LAYING OF RISINGMAIN & DISTRIBUTION SYSTEM |
| 480 | Earth work in excavation of trenches for laying of pipe line including dressing, leveling the bed upto required depth & within initial lead of 50mtrs & 1.5mtrs initial lift breaking clods to maximum size (5 to 7cm) laying in layers not exceeding 0.30mtrs in depth etc. complete including cost of all labour, T&P, pipes, fittings and specials etc.required for completion of the item as per specification & direction of Engineer in charge. |
| 481 | In all kind of Soil : (800 mtr x 0.38mtr x 0.90mtr) |
| 482 | In Stoney Earth : (860 mtr x 0.38mtr x 0.90mtr) |
| 483 | Transporting and supplying all materials, labour T&P, fabricating, fitting and fixing with specials at the site using Electric resistance welded pipes of reputed make (TATA /Zindal ), confirming to IS 1239 (P-1) 2004, IS 1978 & IS 3598, medium quality & standard weight, including cutting the pipes & flanges, drilling the bolt holes in the flanges, matching the pipes and flanges and jointing with proper gradient & alignment, welding with arc welding using electrodes with power generated by using mobile diesel generator set, etc. complete as per direction of Engineer in charge, including painting two coats with black anti-corrosive paint over one coat of primer, all cost, conveyance, taxes of paints, cost of fittings as \"T\", Bend, Offsets, Nuts and bolts, Leather packing etc. but including the cost of flanges and required earthwork, cutting holes in masonry works etc. |
| 484 | 80 mm dia G.I pipe |
| 485 | Supplying all materials including HDPE pipes, fittings and specials, labour, T&P for laying in trenches unplasticised HDPEpipes of the following outside diameter for all classes and specials as required at site, including jointing with solvent cement by non heat application method excluding the cost of earth work in excavation but including the cost of pipescost of fitting and specials& testing the pipe line etc. all complete as per direction of Engineer-in-charge. |
| 486 | 90 mm HDPEPipe PE-80 PN-6 |
| 487 | Supplying all labour, T&P for filling excavated earth in the pipe line trenches by laying in layers not exceding 9\" (225mm) including watering and ramming as per the directionEngineer-in-charge. |
| 488 | In all kinds of soil : |
| 489 | In Stoney Earth : |
| 490 | Supplying all labour T&P fitting and fixing of CI sluice valves with double flanged ends in the water line for controlling purposes conforming to IS:14846-2000 for the following rating and nominal diameters as per specifications complete of approved make with supply of all joining materials, T&P etc all complete including testing as per specicication complete |
| 491 | 80 mm dia CI Sluice Valve IS- 14846/2000 PN-1.00 |
| 492 | 80 mm dia CI NR Valve IS- 14846/2000 PN-1.00 |
| 493 | 15 mm dia CISingle Air Valve IS 14845/2000 |
| 494 | Supplying all labour, material, T&P and constructing brick masonry valve chambers of following mentioned inetrnal dimension, complete with C.C (1:4:8) with 40 mm size hbg metal at the bottom, C.B brick masonry in c.m(1:4) with internal plastering and R.C.C top cover with C.C(1:2:4) with 12mm size hbg metal & MS Rod 0.85qntl per 1 cum and with 12mm thick cement plaster (1:4)complete in all respect as per the direction of the Engineer-in-charge. |
| 495 | SluiceValve/NR Valve Chamber (Size 0.90mtr x 0.90 mtr x 1.15 mtr) |
| 496 | Air Valve Chamber(Size 0.75mtr x 0.75mtr x 1.15mtr) |
| 497 | Supplying all labour, T&P and dismantling of concrete road/Metalled road/Asphalt roads for laying of pipe line and making good to the damagesas per approved design and specification. |
| 498 | Supplying all wirks labour T&P for making of concrete road with CC(1:4:8) work using 4 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respect as per specification and direction of the Engineer in Charge. |
| 499 | Supplying all wirks labour T&P for making of concrete road with CC(1:2:4) work using 12 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respect as per specification and direction of the Engineer in Charge. |
| 500 | Supplying all labour T&P laying of pipe line to each house hold including cost of PVC/GI pipe, saddle of required size, 1/8\"(3mm) brass ferrule and bib cock at the end of supply line including excavation trenches and making good the damages etc complet as per direction of Engineer in Charge as approved design and specification. |
| 501 | Along the pipe line |
| 502 | Opposie side of pipe line |
| 503 | Supplying all wirks labour T&P for making of platform of size(0.45x0.45x0.10) for FHTC with CC(1:2:4) work using 12 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respectas per specification and direction of the Engineer in Charge. |
| 504 | Supplying all labour T&P and materials such as 1000 liter capacity syntex tank, GI pipe of 15 mm 20 mm 25 mm size of medium quality with ferrule cock , FWV etc for water supply to AWC, UP School, GP office, medical etc with provision of staging for PVC tank complete. (Detailed estimateattached) |
| 505 | Supplying all labour Materials, T&P for construction of MS display board 1.50m x 1.20 m etc. Complete as per direction of the Engineer-in-Charge. |
| 506 | CONSTRUCTION OF PUMP HOUSE |
| 507 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soilwith all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 508 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 509 | Providing cement concrete M-25 for RCC work with 20mm and down gred size hg chips including hoisting and laying etc. complete excluding cost of MS rod including rigid and smoth centering and shuttering for RCC work includingfalse works and dismentaling after casting as per direction of Engineer-in-charge. |
| 510 | RCC Column & Beam |
| 511 | Supplying, filling in foundation & plinth with sand in 15cms. (9\") thick layers with the cost conveyance royalties, taxes of the materials complete as per specification and direction of the Engineer-in-charge |
| 512 | Supplying all materials, labour, T&P and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 513 | Supplying all materials, labour, T&P and providing Brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 514 | Supplying all materials, labour T&P providing R.C.C. (1:2:4) workusing 12mmsize hard black hand broken granite stone chipsincluding cost conveyance taxes and royalty of all materials and labour with T&P required for the work etc, complete in all respect but excluding cost of MS Rods or Tor Steel and binding wires of 18 to 20 gauge as perincluding the cost of required quantity of centering and shuttering as per the dirction of the Engineer in Charge. |
| 515 | Lintel |
| 516 | Chajja |
| 517 | Beam |
| 518 | Slab |
| 519 | Straightening bend up or coiled rods cutting bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor Steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works including cost, conveyance and taxes of M.S. Rods or Tor Steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc, complete in all floors as per specification and direction of the Engineer-in-charge. |
| 520 | Cost of M.S doors and windows: |
| 521 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per specification and direction of the Engineer-in-charge. |
| 522 | Supplying all materials, labour, T&P and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 523 | Supplying all materials, labour, T&P and providing C.C. (1:2:4) workusing 12mmsize hard black broken granite stone chips including cost, conveyance, royalty & taxesetc, complete in all respect but excluding cost of M.S. Rods or Tor Steel and binding wires of 18 to 20 gaugeas per specification and direction of the Engineer-in-charge. |
| 524 | Providing, fixing tiles in dados skirting and risers of steps on 12mm. thick cement plaster(1:3) jpinted with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge. |
| 525 | Providing & fixing (Glazed) tiles in all floor & treads of steps & landing on 25 mm thick bed of cement mortar in proportion (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge. |
| 526 | Supplying all materials, labour, T&P and providing 20mm (3/4\") thick cement plaster (1:6) finished smooth to out side of stone work after raking out the joint including, watering and curing with cost and conveyance of all materials and labour with T&P ,all taxes and royalties etc., complete in all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 527 | Supplying all material, labour, T&P and providing grading concrete with C.C(1:2:2) using 06mm. Size hard stone broken chips of approved quality including hpisting and laying not exceeding 25mm. thick with proper packing and required slope, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect as per specification and direction of the Engineer-in-charge. |
| 528 | Supplying all labour, T&P and materials and finishing walls withtwo coats of weather coat over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 529 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 530 | CONSTRUCTION OF COMPOUND WALL FOR PUMP HOUSE |
| 531 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 532 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 533 | Supplying all labour, T&P and materials and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 534 | Supplying all labour, T&P and materials and providing 1\" thick D.P.C. over stone metal with cost, conveyance, tax, royalty of materials required and as per specification and direction of the Engineer-in-charge. |
| 535 | Supplying all labour, T&P and materials and providing brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 536 | Cost of MS Grill Gate |
| 537 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per the direction of the Engineer-in-charge |
| 538 | Supplying all labour, T&P and materials and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 539 | Supplying all labour, T&P and materials and providing 20mm. thick cement plaster in cement mortar (1:6) for stone workand conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 540 | Supplying all labour, T&P and materials and finishing walls withweather coat of approvedpaint over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 541 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 542 | PUMPING UNIT |
| 543 | Supplying installing, testing & commissioning of suitableHorizontalSumersible pumping set of any repurted make such as KSB/Crompton/Greaves/ Kirloskar CRI/Suguna etc with energy efficient motor with ISI mark to run in3 phase AC supply capble to discharge clear water from Production well @3.00 Lps against a total head of 110 mtrs. etc. All complete as per direction of Engineer in Charge. |
| 544 | Supplying Testing ,and installation of suitable control pannel Boardfor suitablesubmerssible pump and motor set with reputed ISI make. |
| 545 | Make BCH/L & T/Havels |
| 546 | Supplying, fitting & testing of 6mm2 three core flat submerssible electric cable reputed ISI make Finolex/BCH/Havells |
| 547 | Required assessories like G.I R/S, stainless Steel nipple, G.I bend,wire ropw allof heavy quality with M.S calmp, MS bore cover etc. as required at site to complete the installation of the pimp set etc.complete in all respect. |
| 548 | Supplying of 50 mm dia HDPE suction pipe for lowering of pump & motors etc |
| 549 | SITE DEVELOPMENT |
| 550 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 551 | In all kinds of soil : |
| 552 | PERCOLATION WELL 6M DIA WITH MS COVER |
| 553 | Earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the E-I-C. below bed level. |
| 554 | 1st depth of 1.50 Mtr |
| 555 | 2nd depth of 1.50 Mtr |
| 556 | 3rd depth of 1.50 Mtr |
| 557 | 4th depth of 1.50 Mtr |
| 558 | 5th depth of 1.50 Mtr |
| 559 | 6th depth of 1.50 Mtr |
| 560 | 7th depth of 1.50 Mtr |
| 561 | 8th depth of 1.50 Mtr |
| 562 | 9th depth of 1.50 Mtr |
| 563 | Supplying all materials, labour, T&P providing rough dry Stone packingwith granite stone of 15cm. to 30cm (1 cuft) and above weighing 140 lbs. to 160 lbs./cuft quarried, free from weathered surface of approved quarry including splays cutting, moulding where necessary & including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 564 | Supplying all labour, T&P and materials and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 565 | Supplying all materials, labour T&P providing R.C.C. (1:2:4) workusing 12mmsize hard black hand broken granite stone chips of approved quality and from approved quarry including hoisting lowering laying and compacting concrete watering and curing for four weeks, finishing the exposed surface smoothincluding cost conveyance taxes and royalty of all materials and labour with T&P required for the work etc, complete in all respect .as per specification and direction of the Engineer-in-charge. |
| 566 | Supplying all materials, labour T&P and providngrigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including cost of materials etc. |
| 567 | Straightening bend up or coiled rods cutting bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor Steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works including cost, conveyance and taxes of M.S. Rods or Tor Steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc, complete in all floors as per specification and direction of the Engineer-in-charge. |
| 568 | Supplying all labour, materials, T&P for 20mm (3/4\") thick cement plaster (1:6) finished smoothafter raking out the joint including, watering and curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalties etc. complete as per the direction of the Engineer-in-charge. |
| 569 | Supplying all labour, materials, T&P for providing cement flush pointing in CM (1:3) to stone workincluding, watering and curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalties etc. complete as per the direction of the Engineer-in-charge. |
| 570 | Supplying all labour, T&P for filling with excavated earth in the pipe line trenches by laying in layers not exceding 9\" (225mm) including watering and ramming as per the directionEngineer-in-charge. |
| 571 | Supplying all materials labour T&P and welding machinefor making cover of the dry R.R. masoanry well with MS plate of 16 gauge including fixing of 100x100 mm angle iron main supportand cross supports etc., all complete including painting the cover with anti corrosive paint and fixing rigidly to the top of well staining with provision of chain pully stand and door at the topbelow the pully stand including locking arrangement etc., all complete. as per direction of Engineer-in-charge. |
| 572 | Supplying alllabour, T&P for dewateriang during excavation and staining works with hire charges of pumping set etc. all complete as per the direction of Engineer in charge. |
| 573 | Supplying all materials, labour T&P for providing cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metal of approved quality from approved quarry including hoisting and laying not exceeding 150mm. thick with proper packing including curring,shuttering if necessarywith cost, conveyance, royalty, taxes of all materials required for the work includingT&P articles finishing the exposed surface smooth as per specification & direction of the Engineer-in-charge. |
| 574 | INTERNAL ELECTRIFICATION |
| 575 | Supplying the following materials ,required labour and T &P and providing internal electrification to pump house as required at site including commisioning and testing as per the direction of the Engineer in Charge. |
| 576 | Surface wiring to light point in 20mm dia PVC cond. Pipe on MS board wiyh 3mm thick mulltistand copper wire. |
| 577 | Short point |
| 578 | Medium point |
| 579 | Surface wiring to 3pin 5A plug point in 20m dia pvc conduit on existing board . |
| 580 | surface wiring to 3pin 5A plug point in 20m dia pvc conduit on existing board . |
| 581 | Medium point |
| 582 | B.H. Fitting including all connection. |
| 583 | 63 AMP 440 V ICTPN main switch |
| 584 | 3 nos 63 Amp kitkat fuse on MS Board. |
| 585 | 32 Amp main switch with all connections |
| 586 | Sub- main wiring 4 x 4mm2 copper wire with in 20mm dia pvc conduit. |
| 587 | Sub- main wiring 2 x 2.5mm2 copper wire with in 20mm dia pvc conduit. |
| 588 | Standard earthing in 38mm dia 3mtr long GI pipe with No 8 GI wire including all connections. |
| 589 | 4\" x 40 W F.L. Fitting complete with tube. |
| 590 | 25 x 5 mm thick iron FL frame covered with GI sheet with painting , ( 6.5 ft x 2.5 ft ) embeded on wall with all consumable materials like cement chips painting etc including all connections with PVC paint, flexible pipe,copper cable etc. |
| 591 | 15 Amp switch and socket on 10 x 12 size MS board with all connections |
| 592 | RYB phase indicator with control 5 Amp F.T. switch with all connection. |
| 593 | 5 Amp plug point on separate board fixed with 7\" x 4\" MS box with lylem cover with necessary connection. |
| 594 | Short point |
| 595 | 10mm2 4 core cable |
| 596 | Ceiling Fan |
| 597 | 5YEAR OPERATION & MAINTENANCE |
| 598 | CostofOpernation & maintenance as per term & condition and technical specification mentioned in SBD. |
| 599 | PIPEWATER SUPPLY TOTANGINI (PUTAPADA)(ZONE-6) |
| 600 | CONSTRUCTION OF 20,000 LTR RCC OGR |
| 601 | Designing , construction, testing and commissioning of 20,000 ltr capacity circular shape flat bottom with domb shape RCCon the groundreservoir including supplying , fitting, fixing of M.S and aluminuim ladder ,water level indicator, lightening arrester 1 nos. 80 mm CI puddle collar-4, 2 nos. CI MH cover, Inlet & Outlet arrangement with 80 mm dia GI pipe - 12 mtr and soil testing & drawing design etc. testing of the joints all complete fitting and fixing,80 CI sluice valves-1 No, Sluice valve chamber -1 nosof standard make providing CC M-25 for RCC work with 20mm& down grade size hg chips with 20mm thick cement plater over the cement concrete work, cement punning over plaster surface and painting 2 coats of water proofingweather coat etc. all complete as per approved drawing and design as per direction of Engineer-in-Charge. |
| 602 | CONSTRUCTION OF COMPOUND WALL FOR OGR |
| 603 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 604 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 605 | Supplying all labour, T&P and materials and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 606 | Supplying all labour, T&P and materials and providing 1\" thick D.P.C. over stone metal with cost, conveyance, tax, royalty of materials required and as per specification and direction of the Engineer-in-charge. |
| 607 | Supplying all labour, T&P and materials and providing brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 608 | Cost of MS Grill Gate |
| 609 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per the direction of the Engineer-in-charge |
| 610 | Supplying all labour, T&P and materials and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 611 | Supplying all labour, T&P and materials and providing 20mm. thick cement plaster in cement mortar (1:6) for stone workand conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 612 | Supplying all labour, T&P and materials and finishing walls withweather coat of approvedpaint over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 613 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 614 | LAYING OF RISINGMAIN & DISTRIBUTION SYSTEM |
| 615 | Earth work in excavation of trenches for laying of pipe line including dressing, leveling the bed upto required depth & within initial lead of 50mtrs & 1.5mtrs initial lift breaking clods to maximum size (5 to 7cm) laying in layers not exceeding 0.30mtrs in depth etc. complete including cost of all labour, T&P, pipes, fittings and specials etc.required for completion of the item as per specification & direction of Engineer in charge. |
| 616 | In all kind of Soil : (800 mtr x 0.38mtr x 0.90mtr) |
| 617 | In Stoney Earth : (870 mtr x 0.38mtr x 0.90mtr) |
| 618 | Transporting and supplying all materials, labour T&P, fabricating, fitting and fixing with specials at the site using Electric resistance welded pipes of reputed make (TATA /Zindal ), confirming to IS 1239 (P-1) 2004, IS 1978 & IS 3598, medium quality & standard weight, including cutting the pipes & flanges, drilling the bolt holes in the flanges, matching the pipes and flanges and jointing with proper gradient & alignment, welding with arc welding using electrodes with power generated by using mobile diesel generator set, etc. complete as per direction of Engineer in charge, including painting two coats with black anti-corrosive paint over one coat of primer, all cost, conveyance, taxes of paints, cost of fittings as \"T\", Bend, Offsets, Nuts and bolts, Leather packing etc. but including the cost of flanges and required earthwork, cutting holes in masonry works etc. |
| 619 | 80 mm dia G.I pipe |
| 620 | Supplying all materials including HDPE pipes, fittings and specials, labour, T&P for laying in trenches unplasticised HDPEpipes of the following outside diameter for all classes and specials as required at site, including jointing with solvent cement by non heat application method excluding the cost of earth work in excavation but including the cost of pipescost of fitting and specials& testing the pipe line etc. all complete as per direction of Engineer-in-charge. |
| 621 | 90 mm HDPEPipe PE-80 PN-6 |
| 622 | Supplying all labour, T&P for filling excavated earth in the pipe line trenches by laying in layers not exceding 9\" (225mm) including watering and ramming as per the directionEngineer-in-charge. |
| 623 | In all kinds of soil : |
| 624 | In Stoney Earth : |
| 625 | Supplying all labour T&P fitting and fixing of CI sluice valves with double flanged ends in the water line for controlling purposes conforming to IS:14846-2000 for the following rating and nominal diameters as per specifications complete of approved make with supply of all joining materials, T&P etc all complete including testing as per specicication complete |
| 626 | 80 mm dia CI Sluice Valve IS- 14846/2000 PN-1.00 |
| 627 | 80 mm dia CI NR Valve IS- 14846/2000 PN-1.00 |
| 628 | 15 mm dia CISingle Air Valve IS 14845/2000 |
| 629 | Supplying all labour, material, T&P and constructing brick masonry valve chambers of following mentioned inetrnal dimension, complete with C.C (1:4:8) with 40 mm size hbg metal at the bottom, C.B brick masonry in c.m(1:4) with internal plastering and R.C.C top cover with C.C(1:2:4) with 12mm size hbg metal & MS Rod 0.85qntl per 1 cum and with 12mm thick cement plaster (1:4)complete in all respect as per the direction of the Engineer-in-charge. |
| 630 | SluiceValve/NR Valve Chamber (Size 0.90mtr x 0.90 mtr x 1.15 mtr) |
| 631 | Air Valve Chamber(Size 0.75mtr x 0.75mtr x 1.15mtr) |
| 632 | Supplying all labour, T&P and dismantling of concrete road/Metalled road/Asphalt roads for laying of pipe line and making good to the damagesas per approved design and specification. |
| 633 | Supplying all wirks labour T&P for making of concrete road with CC(1:4:8) work using 4 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respect as per specification and direction of the Engineer in Charge. |
| 634 | Supplying all wirks labour T&P for making of concrete road with CC(1:2:4) work using 12 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respect as per specification and direction of the Engineer in Charge. |
| 635 | Supplying all labour T&P laying of pipe line to each house hold including cost of PVC/GI pipe, saddle of required size, 1/8\"(3mm) brass ferrule and bib cock at the end of supply line including excavation trenches and making good the damages etc complet as per direction of Engineer in Charge as approved design and specification. |
| 636 | Along the pipe line |
| 637 | Opposie side of pipe line |
| 638 | Supplying all wirks labour T&P for making of platform of size(0.45x0.45x0.10) for FHTC with CC(1:2:4) work using 12 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respectas per specification and direction of the Engineer in Charge. |
| 639 | Supplying all labour T&P and materials such as 1000 liter capacity syntex tank, GI pipe of 15 mm 20 mm 25 mm size of medium quality with ferrule cock , FWV etc for water supply to AWC, UP School, GP office, medical etc with provision of staging for PVC tank complete. (Detailed estimateattached) |
| 640 | Supplying all labour Materials, T&P for construction of MS display board 1.50m x 1.20 m etc. Complete as per direction of the Engineer-in-Charge. |
| 641 | CONSTRUCTION OF PUMP HOUSE |
| 642 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soilwith all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 643 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 644 | Providing cement concrete M-25 for RCC work with 20mm and down gred size hg chips including hoisting and laying etc. complete excluding cost of MS rod including rigid and smoth centering and shuttering for RCC work includingfalse works and dismentaling after casting as per direction of Engineer-in-charge. |
| 645 | RCC Column & Beam |
| 646 | Supplying, filling in foundation & plinth with sand in 15cms. (9\") thick layers with the cost conveyance royalties, taxes of the materials complete as per specification and direction of the Engineer-in-charge |
| 647 | Supplying all materials, labour, T&P and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 648 | Supplying all materials, labour, T&P and providing Brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 649 | Supplying all materials, labour T&P providing R.C.C. (1:2:4) workusing 12mmsize hard black hand broken granite stone chipsincluding cost conveyance taxes and royalty of all materials and labour with T&P required for the work etc, complete in all respect but excluding cost of MS Rods or Tor Steel and binding wires of 18 to 20 gauge as perincluding the cost of required quantity of centering and shuttering as per the dirction of the Engineer in Charge. |
| 650 | Lintel |
| 651 | Chajja |
| 652 | Beam |
| 653 | Slab |
| 654 | Straightening bend up or coiled rods cutting bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor Steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works including cost, conveyance and taxes of M.S. Rods or Tor Steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc, complete in all floors as per specification and direction of the Engineer-in-charge. |
| 655 | Cost of M.S doors and windows: |
| 656 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per specification and direction of the Engineer-in-charge. |
| 657 | Supplying all materials, labour, T&P and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 658 | Supplying all materials, labour, T&P and providing C.C. (1:2:4) workusing 12mmsize hard black broken granite stone chips including cost, conveyance, royalty & taxesetc, complete in all respect but excluding cost of M.S. Rods or Tor Steel and binding wires of 18 to 20 gaugeas per specification and direction of the Engineer-in-charge. |
| 659 | Providing, fixing tiles in dados skirting and risers of steps on 12mm. thick cement plaster(1:3) jpinted with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge. |
| 660 | Providing & fixing (Glazed) tiles in all floor & treads of steps & landing on 25 mm thick bed of cement mortar in proportion (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge. |
| 661 | Supplying all materials, labour, T&P and providing 20mm (3/4\") thick cement plaster (1:6) finished smooth to out side of stone work after raking out the joint including, watering and curing with cost and conveyance of all materials and labour with T&P ,all taxes and royalties etc., complete in all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 662 | Supplying all material, labour, T&P and providing grading concrete with C.C(1:2:2) using 06mm. Size hard stone broken chips of approved quality including hpisting and laying not exceeding 25mm. thick with proper packing and required slope, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect as per specification and direction of the Engineer-in-charge. |
| 663 | Supplying all labour, T&P and materials and finishing walls withtwo coats of weather coat over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 664 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 665 | CONSTRUCTION OF COMPOUND WALL FOR PUMP HOUSE |
| 666 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 667 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 668 | Supplying all labour, T&P and materials and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 669 | Supplying all labour, T&P and materials and providing 1\" thick D.P.C. over stone metal with cost, conveyance, tax, royalty of materials required and as per specification and direction of the Engineer-in-charge. |
| 670 | Supplying all labour, T&P and materials and providing brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 671 | Cost of MS Grill Gate |
| 672 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per the direction of the Engineer-in-charge |
| 673 | Supplying all labour, T&P and materials and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 674 | Supplying all labour, T&P and materials and providing 20mm. thick cement plaster in cement mortar (1:6) for stone workand conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 675 | Supplying all labour, T&P and materials and finishing walls withweather coat of approvedpaint over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 676 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 677 | PUMPING UNIT |
| 678 | Supplying installing, testing & commissioning of suitableVerticalSumersible pumping set of any repurted make such as KSB/Crompton/Greaves/ Kirloskar CRI/Suguna etc with energy efficient motor with ISI mark to run in3 phase AC supply capble to discharge clear water from Production well @3.00 Lps against a total head of 110 mtrs. etc. All complete as per direction of Engineer in Charge. |
| 679 | Supplying Testing ,and installation of suitable control pannel Boardfor suitablesubmerssible pump and motor set with reputed ISI make. |
| 680 | Make BCH/L & T/Havels |
| 681 | Supplying, fitting & testing of 4mm2 three core flat submerssible electric cable reputed ISI make Finolex/BCH/Havells |
| 682 | Required assessories like G.I R/S, stainless Steel nipple, G.I bend,wire ropw allof heavy quality with M.S calmp, MS bore cover etc. as required at site to complete the installation of the pimp set etc.complete in all respect. |
| 683 | Supplying of 50 mm dia HDPE suction pipe for lowering of pump & motors etc |
| 684 | SITE DEVELOPMENT |
| 685 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 686 | In all kinds of soil : |
| 687 | INTERNAL ELECTRIFICATION |
| 688 | Supplying the following materials ,required labour and T &P and providing internal electrification to pump house as required at site including commisioning and testing as per the direction of the Engineer in Charge. |
| 689 | Surface wiring to light point in 20mm dia PVC cond. Pipe on MS board wiyh 3mm thick mulltistand copper wire. |
| 690 | Short point |
| 691 | Medium point |
| 692 | Surface wiring to 3pin 5A plug point in 20m dia pvc conduit on existing board . |
| 693 | surface wiring to 3pin 5A plug point in 20m dia pvc conduit on existing board . |
| 694 | Medium point |
| 695 | B.H. Fitting including all connection. |
| 696 | 63 AMP 440 V ICTPN main switch |
| 697 | 3 nos 63 Amp kitkat fuse on MS Board. |
| 698 | 32 Amp main switch with all connections |
| 699 | Sub- main wiring 4 x 4mm2 copper wire with in 20mm dia pvc conduit. |
| 700 | Sub- main wiring 2 x 2.5mm2 copper wire with in 20mm dia pvc conduit. |
| 701 | Standard earthing in 38mm dia 3mtr long GI pipe with No 8 GI wire including all connections. |
| 702 | 4\" x 40 W F.L. Fitting complete with tube. |
| 703 | 25 x 5 mm thick iron FL frame covered with GI sheet with painting , ( 6.5 ft x 2.5 ft ) embeded on wall with all consumable materials like cement chips painting etc including all connections with PVC paint, flexible pipe,copper cable etc. |
| 704 | 15 Amp switch and socket on 10 x 12 size MS board with all connections |
| 705 | RYB phase indicator with control 5 Amp F.T. switch with all connection. |
| 706 | 5 Amp plug point on separate board fixed with 7\" x 4\" MS box with lylem cover with necessary connection. |
| 707 | Short point |
| 708 | 10mm2 4 core cable |
| 709 | Ceiling Fan |
| 710 | 5YEAR OPERATION & MAINTENANCE |
| 711 | CostofOpernation & maintenance as per term & condition and technical specification mentioned in SBD. |
| 712 | PIPEWATER SUPPLY TOTANGINI (BADALAMTAPADU & TALALAMTAPADU) (ZONE-7) |
| 713 | CONSTRUCTION OF 20,000 LTR RCC OGR |
| 714 | Designing , construction, testing and commissioning of 20,000 ltr capacity circular shape flat bottom with domb shape RCCon the groundreservoir including supplying , fitting, fixing of M.S and aluminuim ladder ,water level indicator, lightening arrester 1 nos. 80 mm CI puddle collar-4, 2 nos. CI MH cover, Inlet & Outlet arrangement with 80 mm dia GI pipe - 12 mtr and soil testing & drawing design etc. testing of the joints all complete fitting and fixing,80 CI sluice valves-1 No, Sluice valve chamber -1 nosof standard make providing CC M-25 for RCC work with 20mm& down grade size hg chips with 20mm thick cement plater over the cement concrete work, cement punning over plaster surface and painting 2 coats of water proofingweather coat etc. all complete as per approved drawing and design as per direction of Engineer-in-Charge. |
| 715 | CONSTRUCTION OF COMPOUND WALL FOR OGR |
| 716 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 717 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 718 | Supplying all labour, T&P and materials and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 719 | Supplying all labour, T&P and materials and providing 1\" thick D.P.C. over stone metal with cost, conveyance, tax, royalty of materials required and as per specification and direction of the Engineer-in-charge. |
| 720 | Supplying all labour, T&P and materials and providing brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 721 | Cost of MS Grill Gate |
| 722 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per the direction of the Engineer-in-charge |
| 723 | Supplying all labour, T&P and materials and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 724 | Supplying all labour, T&P and materials and providing 20mm. thick cement plaster in cement mortar (1:6) for stone workand conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 725 | Supplying all labour, T&P and materials and finishing walls withweather coat of approvedpaint over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 726 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 727 | LAYING OF RISINGMAIN & DISTRIBUTION SYSTEM |
| 728 | Earth work in excavation of trenches for laying of pipe line including dressing, leveling the bed upto required depth & within initial lead of 50mtrs & 1.5mtrs initial lift breaking clods to maximum size (5 to 7cm) laying in layers not exceeding 0.30mtrs in depth etc. complete including cost of all labour, T&P, pipes, fittings and specials etc.required for completion of the item as per specification & direction of Engineer in charge. |
| 729 | In all kind of Soil : (1300 mtr x 0.38mtr x 0.90mtr) |
| 730 | In Stoney Earth : (1300 mtr x 0.38mtr x 0.90mtr) |
| 731 | Transporting and supplying all materials, labour T&P, fabricating, fitting and fixing with specials at the site using Electric resistance welded pipes of reputed make (TATA /Zindal ), confirming to IS 1239 (P-1) 2004, IS 1978 & IS 3598, medium quality & standard weight, including cutting the pipes & flanges, drilling the bolt holes in the flanges, matching the pipes and flanges and jointing with proper gradient & alignment, welding with arc welding using electrodes with power generated by using mobile diesel generator set, etc. complete as per direction of Engineer in charge, including painting two coats with black anti-corrosive paint over one coat of primer, all cost, conveyance, taxes of paints, cost of fittings as \"T\", Bend, Offsets, Nuts and bolts, Leather packing etc. but including the cost of flanges and required earthwork, cutting holes in masonry works etc. |
| 732 | 80 mm dia G.I pipe |
| 733 | Supplying all materials including HDPE pipes, fittings and specials, labour, T&P for laying in trenches unplasticised HDPEpipes of the following outside diameter for all classes and specials as required at site, including jointing with solvent cement by non heat application method excluding the cost of earth work in excavation but including the cost of pipescost of fitting and specials& testing the pipe line etc. all complete as per direction of Engineer-in-charge. |
| 734 | 90 mm HDPEPipe PE-80 PN-6 |
| 735 | Supplying all labour, T&P for filling excavated earth in the pipe line trenches by laying in layers not exceding 9\" (225mm) including watering and ramming as per the directionEngineer-in-charge. |
| 736 | In all kinds of soil : |
| 737 | In Stoney Earth : |
| 738 | Supplying all labour T&P fitting and fixing of CI sluice valves with double flanged ends in the water line for controlling purposes conforming to IS:14846-2000 for the following rating and nominal diameters as per specifications complete of approved make with supply of all joining materials, T&P etc all complete including testing as per specicication complete |
| 739 | 80 mm dia CI Sluice Valve IS- 14846/2000 PN-1.00 |
| 740 | 80 mm dia CI NR Valve IS- 14846/2000 PN-1.00 |
| 741 | 15 mm dia CISingle Air Valve IS 14845/2000 |
| 742 | Supplying all labour, material, T&P and constructing brick masonry valve chambers of following mentioned inetrnal dimension, complete with C.C (1:4:8) with 40 mm size hbg metal at the bottom, C.B brick masonry in c.m(1:4) with internal plastering and R.C.C top cover with C.C(1:2:4) with 12mm size hbg metal & MS Rod 0.85qntl per 1 cum and with 12mm thick cement plaster (1:4)complete in all respect as per the direction of the Engineer-in-charge. |
| 743 | SluiceValve/NR Valve Chamber (Size 0.90mtr x 0.90 mtr x 1.15 mtr) |
| 744 | Air Valve Chamber(Size 0.75mtr x 0.75mtr x 1.15mtr) |
| 745 | Supplying all labour, T&P and dismantling of concrete road/Metalled road/Asphalt roads for laying of pipe line and making good to the damagesas per approved design and specification. |
| 746 | Supplying all wirks labour T&P for making of concrete road with CC(1:4:8) work using 4 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respect as per specification and direction of the Engineer in Charge. |
| 747 | Supplying all wirks labour T&P for making of concrete road with CC(1:2:4) work using 12 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respect as per specification and direction of the Engineer in Charge. |
| 748 | Supplying all labour T&P laying of pipe line to each house hold including cost of PVC/GI pipe, saddle of required size, 1/8\"(3mm) brass ferrule and bib cock at the end of supply line including excavation trenches and making good the damages etc complet as per direction of Engineer in Charge as approved design and specification. |
| 749 | Along the pipe line |
| 750 | Opposie side of pipe line |
| 751 | Supplying all wirks labour T&P for making of platform of size(0.45x0.45x0.10) for FHTC with CC(1:2:4) work using 12 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respectas per specification and direction of the Engineer in Charge. |
| 752 | Supplying all labour T&P and materials such as 1000 liter capacity syntex tank, GI pipe of 15 mm 20 mm 25 mm size of medium quality with ferrule cock , FWV etc for water supply to AWC, UP School, GP office, medical etc with provision of staging for PVC tank complete. (Detailed estimateattached) |
| 753 | Supplying all labour Materials, T&P for construction of MS display board 1.50m x 1.20 m etc. Complete as per direction of the Engineer-in-Charge. |
| 754 | CONSTRUCTION OF PUMP HOUSE |
| 755 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soilwith all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 756 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 757 | Providing cement concrete M-25 for RCC work with 20mm and down gred size hg chips including hoisting and laying etc. complete excluding cost of MS rod including rigid and smoth centering and shuttering for RCC work includingfalse works and dismentaling after casting as per direction of Engineer-in-charge. |
| 758 | RCC Column & Beam |
| 759 | Supplying, filling in foundation & plinth with sand in 15cms. (9\") thick layers with the cost conveyance royalties, taxes of the materials complete as per specification and direction of the Engineer-in-charge |
| 760 | Supplying all materials, labour, T&P and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 761 | Supplying all materials, labour, T&P and providing Brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 762 | Supplying all materials, labour T&P providing R.C.C. (1:2:4) workusing 12mmsize hard black hand broken granite stone chipsincluding cost conveyance taxes and royalty of all materials and labour with T&P required for the work etc, complete in all respect but excluding cost of MS Rods or Tor Steel and binding wires of 18 to 20 gauge as perincluding the cost of required quantity of centering and shuttering as per the dirction of the Engineer in Charge. |
| 763 | Lintel |
| 764 | Chajja |
| 765 | Beam |
| 766 | Slab |
| 767 | Straightening bend up or coiled rods cutting bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor Steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works including cost, conveyance and taxes of M.S. Rods or Tor Steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc, complete in all floors as per specification and direction of the Engineer-in-charge. |
| 768 | Cost of M.S doors and windows: |
| 769 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per specification and direction of the Engineer-in-charge. |
| 770 | Supplying all materials, labour, T&P and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 771 | Supplying all materials, labour, T&P and providing C.C. (1:2:4) workusing 12mmsize hard black broken granite stone chips including cost, conveyance, royalty & taxesetc, complete in all respect but excluding cost of M.S. Rods or Tor Steel and binding wires of 18 to 20 gaugeas per specification and direction of the Engineer-in-charge. |
| 772 | Providing, fixing tiles in dados skirting and risers of steps on 12mm. thick cement plaster(1:3) jpinted with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge. |
| 773 | Providing & fixing (Glazed) tiles in all floor & treads of steps & landing on 25 mm thick bed of cement mortar in proportion (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge. |
| 774 | Supplying all materials, labour, T&P and providing 20mm (3/4\") thick cement plaster (1:6) finished smooth to out side of stone work after raking out the joint including, watering and curing with cost and conveyance of all materials and labour with T&P ,all taxes and royalties etc., complete in all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 775 | Supplying all material, labour, T&P and providing grading concrete with C.C(1:2:2) using 06mm. Size hard stone broken chips of approved quality including hpisting and laying not exceeding 25mm. thick with proper packing and required slope, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect as per specification and direction of the Engineer-in-charge. |
| 776 | Supplying all labour, T&P and materials and finishing walls withtwo coats of weather coat over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 777 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 778 | CONSTRUCTION OF COMPOUND WALL FOR PUMP HOUSE |
| 779 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 780 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 781 | Supplying all labour, T&P and materials and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 782 | Supplying all labour, T&P and materials and providing 1\" thick D.P.C. over stone metal with cost, conveyance, tax, royalty of materials required and as per specification and direction of the Engineer-in-charge. |
| 783 | Supplying all labour, T&P and materials and providing brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 784 | Cost of MS Grill Gate |
| 785 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per the direction of the Engineer-in-charge |
| 786 | Supplying all labour, T&P and materials and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 787 | Supplying all labour, T&P and materials and providing 20mm. thick cement plaster in cement mortar (1:6) for stone workand conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 788 | Supplying all labour, T&P and materials and finishing walls withweather coat of approvedpaint over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 789 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 790 | PUMPING UNIT |
| 791 | Supplying installing, testing & commissioning of suitableHorizontalSumersible pumping set of any repurted make such as KSB/Crompton/Greaves/ Kirloskar CRI/Suguna etc with energy efficient motor with ISI mark to run in3 phase AC supply capble to discharge clear water from Production well @3.00 Lps against a total head of 110 mtrs. etc. All complete as per direction of Engineer in Charge. |
| 792 | Supplying Testing ,and installation of suitable control pannel Boardfor suitablesubmerssible pump and motor set with reputed ISI make. |
| 793 | Make BCH/L & T/Havels |
| 794 | Supplying, fitting & testing of 6mm2 three core flat submerssible electric cable reputed ISI make Finolex/BCH/Havells |
| 795 | Required assessories like G.I R/S, stainless Steel nipple, G.I bend,wire ropw allof heavy quality with M.S calmp, MS bore cover etc. as required at site to complete the installation of the pimp set etc.complete in all respect. |
| 796 | Supplying of 50 mm dia HDPE suction pipe for lowering of pump & motors etc |
| 797 | SITE DEVELOPMENT |
| 798 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 799 | In all kinds of soil : |
| 800 | PERCOLATION WELL 6M DIA WITH MS COVER |
| 801 | Earth work excavation in foundation in kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the E-I-C. below bed level. |
| 802 | 1st depth of 1.50 Mtr |
| 803 | 2nd depth of 1.50 Mtr |
| 804 | 3rd depth of 1.50 Mtr |
| 805 | 4th depth of 1.50 Mtr |
| 806 | 5th depth of 1.50 Mtr |
| 807 | 6th depth of 1.50 Mtr |
| 808 | 7th depth of 1.50 Mtr |
| 809 | 8th depth of 1.50 Mtr |
| 810 | 9th depth of 1.50 Mtr |
| 811 | Supplying all materials, labour, T&P providing rough dry Stone packingwith granite stone of 15cm. to 30cm (1 cuft) and above weighing 140 lbs. to 160 lbs./cuft quarried, free from weathered surface of approved quarry including splays cutting, moulding where necessary & including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 812 | Supplying all labour, T&P and materials and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 813 | Supplying all materials, labour T&P providing R.C.C. (1:2:4) workusing 12mmsize hard black hand broken granite stone chips of approved quality and from approved quarry including hoisting lowering laying and compacting concrete watering and curing for four weeks, finishing the exposed surface smoothincluding cost conveyance taxes and royalty of all materials and labour with T&P required for the work etc, complete in all respect .as per specification and direction of the Engineer-in-charge. |
| 814 | Supplying all materials, labour T&P and providngrigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including cost of materials etc. |
| 815 | Straightening bend up or coiled rods cutting bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor Steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works including cost, conveyance and taxes of M.S. Rods or Tor Steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc, complete in all floors as per specification and direction of the Engineer-in-charge. |
| 816 | Supplying all labour, materials, T&P for 20mm (3/4\") thick cement plaster (1:6) finished smoothafter raking out the joint including, watering and curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalties etc. complete as per the direction of the Engineer-in-charge. |
| 817 | Supplying all labour, materials, T&P for providing cement flush pointing in CM (1:3) to stone workincluding, watering and curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalties etc. complete as per the direction of the Engineer-in-charge. |
| 818 | Supplying all labour, T&P for filling excavated earth in the pipe line trenches by laying in layers not exceding 9\" (225mm) including watering and ramming as per the directionEngineer-in-charge. |
| 819 | Supplying all materials labour T&P and welding machinefor making cover of the dry R.R. masoanry well with MS plate of 16 gauge including fixing of 100x100 mm angle iron main supportand cross supports etc., all complete including painting the cover with anti corrosive paint and fixing rigidly to the top of well staining with provision of chain pully stand and door at the topbelow the pully stand including locking arrangement etc., all complete. as per direction of Engineer-in-charge. |
| 820 | Supplying alllabour, T&P for dewateriang during excavation and staining works with hire charges of pumping set etc. all complete as per the direction of Engineer in charge. |
| 821 | Supplying all materials, labour T&P for providing cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metal of approved quality from approved quarry including hoisting and laying not exceeding 150mm. thick with proper packing including curring,shuttering if necessarywith cost, conveyance, royalty, taxes of all materials required for the work includingT&P articles finishing the exposed surface smooth as per specification & direction of the Engineer-in-charge. |
| 822 | INTERNAL ELECTRIFICATION |
| 823 | Supplying the following materials ,required labour and T &P and providing internal electrification to pump house as required at site including commisioning and testing as per the direction of the Engineer in Charge. |
| 824 | Surface wiring to light point in 20mm dia PVC cond. Pipe on MS board wiyh 3mm thick mulltistand copper wire. |
| 825 | Short point |
| 826 | Medium point |
| 827 | Surface wiring to 3pin 5A plug point in 20m dia pvc conduit on existing board . |
| 828 | surface wiring to 3pin 5A plug point in 20m dia pvc conduit on existing board . |
| 829 | Medium point |
| 830 | B.H. Fitting including all connection. |
| 831 | 63 AMP 440 V ICTPN main switch |
| 832 | 3 nos 63 Amp kitkat fuse on MS Board. |
| 833 | 32 Amp main switch with all connections |
| 834 | Sub- main wiring 4 x 4mm2 copper wire with in 20mm dia pvc conduit. |
| 835 | Sub- main wiring 2 x 2.5mm2 copper wire with in 20mm dia pvc conduit. |
| 836 | Standard earthing in 38mm dia 3mtr long GI pipe with No 8 GI wire including all connections. |
| 837 | 4\" x 40 W F.L. Fitting complete with tube. |
| 838 | 25 x 5 mm thick iron FL frame covered with GI sheet with painting , ( 6.5 ft x 2.5 ft ) embeded on wall with all consumable materials like cement chips painting etc including all connections with PVC paint, flexible pipe,copper cable etc. |
| 839 | 15 Amp switch and socket on 10 x 12 size MS board with all connections |
| 840 | RYB phase indicator with control 5 Amp F.T. switch with all connection. |
| 841 | 5 Amp plug point on separate board fixed with 7\" x 4\" MS box with lylem cover with necessary connection. |
| 842 | Short point |
| 843 | 10mm2 4 core cable |
| 844 | Ceiling Fan |
| 845 | 5YEAR OPERATION & MAINTENANCE |
| 846 | CostofOpernation & maintenance as per term & condition and technical specification mentioned in SBD. |
| 847 | PIPEWATER SUPPLY TOONDARANGI |
| 848 | CONSTRUCTION OF 20,000 LTR RCC OGR |
| 849 | Designing , construction, testing and commissioning of 20,000 ltr capacity circular shape flat bottom with domb shape RCCon the groundreservoir including supplying , fitting, fixing of M.S and aluminuim ladder ,water level indicator, lightening arrester 1 nos. 80 mm CI puddle collar-4, 2 nos. CI MH cover, Inlet & Outlet arrangement with 80 mm dia GI pipe - 12 mtr and soil testing & drawing design etc. testing of the joints all complete fitting and fixing,80 CI sluice valves-1 No, Sluice valve chamber -1 nosof standard make providing CC M-25 for RCC work with 20mm& down grade size hg chips with 20mm thick cement plater over the cement concrete work, cement punning over plaster surface and painting 2 coats of water proofingweather coat etc. all complete as per approved drawing and design as per direction of Engineer-in-Charge. |
| 850 | CONSTRUCTION OF COMPOUND WALL FOR OGR |
| 851 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 852 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 853 | Supplying all labour, T&P and materials and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 854 | Supplying all labour, T&P and materials and providing 1\" thick D.P.C. over stone metal with cost, conveyance, tax, royalty of materials required and as per specification and direction of the Engineer-in-charge. |
| 855 | Supplying all labour, T&P and materials and providing brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 856 | Cost of MS Grill Gate |
| 857 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per the direction of the Engineer-in-charge |
| 858 | Supplying all labour, T&P and materials and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 859 | Supplying all labour, T&P and materials and providing 20mm. thick cement plaster in cement mortar (1:6) for stone workand conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 860 | Supplying all labour, T&P and materials and finishing walls withweather coat of approvedpaint over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 861 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 862 | LAYING OF RISINGMAIN & DISTRIBUTION SYSTEM |
| 863 | Earth work in excavation of trenches for laying of pipe line including dressing, leveling the bed upto required depth & within initial lead of 50mtrs & 1.5mtrs initial lift breaking clods to maximum size (5 to 7cm) laying in layers not exceeding 0.30mtrs in depth etc. complete including cost of all labour, T&P, pipes, fittings and specials etc.required for completion of the item as per specification & direction of Engineer in charge. |
| 864 | In all kind of Soil : (356 mtr x 0.38mtr x 0.90mtr) |
| 865 | In Stoney Earth : (400 mtr x 0.38mtr x 0.90mtr) |
| 866 | Transporting and supplying all materials, labour T&P, fabricating, fitting and fixing with specials at the site using Electric resistance welded pipes of reputed make (TATA /Zindal ), confirming to IS 1239 (P-1) 2004, IS 1978 & IS 3598, medium quality & standard weight, including cutting the pipes & flanges, drilling the bolt holes in the flanges, matching the pipes and flanges and jointing with proper gradient & alignment, welding with arc welding using electrodes with power generated by using mobile diesel generator set, etc. complete as per direction of Engineer in charge, including painting two coats with black anti-corrosive paint over one coat of primer, all cost, conveyance, taxes of paints, cost of fittings as \"T\", Bend, Offsets, Nuts and bolts, Leather packing etc. but including the cost of flanges and required earthwork, cutting holes in masonry works etc. |
| 867 | 80 mm dia G.I pipe |
| 868 | Supplying all materials including HDPE pipes, fittings and specials, labour, T&P for laying in trenches unplasticised HDPEpipes of the following outside diameter for all classes and specials as required at site, including jointing with solvent cement by non heat application method excluding the cost of earth work in excavation but including the cost of pipescost of fitting and specials& testing the pipe line etc. all complete as per direction of Engineer-in-charge. |
| 869 | 90 mm HDPEPipe PE-80 PN-6 |
| 870 | Supplying all labour, T&P for filling excavated earth in the pipe line trenches by laying in layers not exceding 9\" (225mm) including watering and ramming as per the directionEngineer-in-charge. |
| 871 | In all kinds of soil : |
| 872 | In Stoney Earth : |
| 873 | Supplying all labour T&P fitting and fixing of CI sluice valves with double flanged ends in the water line for controlling purposes conforming to IS:14846-2000 for the following rating and nominal diameters as per specifications complete of approved make with supply of all joining materials, T&P etc all complete including testing as per specicication complete |
| 874 | 80 mm dia CI Sluice Valve IS- 14846/2000 PN-1.00 |
| 875 | 80 mm dia CI NR Valve IS- 14846/2000 PN-1.00 |
| 876 | 15 mm dia CISingle Air Valve IS 14845/2000 |
| 877 | Supplying all labour, material, T&P and constructing brick masonry valve chambers of following mentioned inetrnal dimension, complete with C.C (1:4:8) with 40 mm size hbg metal at the bottom, C.B brick masonry in c.m(1:4) with internal plastering and R.C.C top cover with C.C(1:2:4) with 12mm size hbg metal & MS Rod 0.85qntl per 1 cum and with 12mm thick cement plaster (1:4)complete in all respect as per the direction of the Engineer-in-charge. |
| 878 | SluiceValve/NR Valve Chamber (Size 0.90mtr x 0.90 mtr x 1.15 mtr) |
| 879 | Air Valve Chamber(Size 0.75mtr x 0.75mtr x 1.15mtr) |
| 880 | Supplying all labour, T&P and dismantling of concrete road/Metalled road/Asphalt roads for laying of pipe line and making good to the damagesas per approved design and specification. |
| 881 | Supplying all wirks labour T&P for making of concrete road with CC(1:4:8) work using 4 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respect as per specification and direction of the Engineer in Charge. |
| 882 | Supplying all wirks labour T&P for making of concrete road with CC(1:2:4) work using 12 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respect as per specification and direction of the Engineer in Charge. |
| 883 | Supplying all labour T&P laying of pipe line to each house hold including cost of PVC/GI pipe, saddle of required size, 1/8\"(3mm) brass ferrule and bib cock at the end of supply line including excavation trenches and making good the damages etc complet as per direction of Engineer in Charge as approved design and specification. |
| 884 | Along the pipe line |
| 885 | Opposie side of pipe line |
| 886 | Supplying all wirks labour T&P for making of platform of size(0.45x0.45x0.10) for FHTC with CC(1:2:4) work using 12 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respectas per specification and direction of the Engineer in Charge. |
| 887 | Supplying all labour T&P and materials such as 1000 liter capacity syntex tank, GI pipe of 15 mm 20 mm 25 mm size of medium quality with ferrule cock , FWV etc for water supply to AWC, UP School, GP office, medical etc with provision of staging for PVC tank complete. (Detailed estimateattached) |
| 888 | Supplying all labour Materials, T&P for construction of MS display board 1.50m x 1.20 m etc. Complete as per direction of the Engineer-in-Charge. |
| 889 | CONSTRUCTION OF PUMP HOUSE |
| 890 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soilwith all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 891 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 892 | Providing cement concrete M-25 for RCC work with 20mm and down gred size hg chips including hoisting and laying etc. complete excluding cost of MS rod including rigid and smoth centering and shuttering for RCC work includingfalse works and dismentaling after casting as per direction of Engineer-in-charge. |
| 893 | RCC Column & Beam |
| 894 | Supplying, filling in foundation & plinth with sand in 15cms. (9\") thick layers with the cost conveyance royalties, taxes of the materials complete as per specification and direction of the Engineer-in-charge |
| 895 | Supplying all materials, labour, T&P and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 896 | Supplying all materials, labour, T&P and providing Brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 897 | Supplying all materials, labour T&P providing R.C.C. (1:2:4) workusing 12mmsize hard black hand broken granite stone chipsincluding cost conveyance taxes and royalty of all materials and labour with T&P required for the work etc, complete in all respect but excluding cost of MS Rods or Tor Steel and binding wires of 18 to 20 gauge as perincluding the cost of required quantity of centering and shuttering as per the dirction of the Engineer in Charge. |
| 898 | Lintel |
| 899 | Chajja |
| 900 | Beam |
| 901 | Slab |
| 902 | Straightening bend up or coiled rods cutting bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor Steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works including cost, conveyance and taxes of M.S. Rods or Tor Steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc, complete in all floors as per specification and direction of the Engineer-in-charge. |
| 903 | Cost of M.S doors and windows: |
| 904 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per specification and direction of the Engineer-in-charge. |
| 905 | Supplying all materials, labour, T&P and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 906 | Supplying all materials, labour, T&P and providing C.C. (1:2:4) workusing 12mmsize hard black broken granite stone chips including cost, conveyance, royalty & taxesetc, complete in all respect but excluding cost of M.S. Rods or Tor Steel and binding wires of 18 to 20 gaugeas per specification and direction of the Engineer-in-charge. |
| 907 | Providing, fixing tiles in dados skirting and risers of steps on 12mm. thick cement plaster(1:3) jpinted with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge. |
| 908 | Providing & fixing (Glazed) tiles in all floor & treads of steps & landing on 25 mm thick bed of cement mortar in proportion (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge. |
| 909 | Supplying all materials, labour, T&P and providing 20mm (3/4\") thick cement plaster (1:6) finished smooth to out side of stone work after raking out the joint including, watering and curing with cost and conveyance of all materials and labour with T&P ,all taxes and royalties etc., complete in all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 910 | Supplying all material, labour, T&P and providing grading concrete with C.C(1:2:2) using 06mm. Size hard stone broken chips of approved quality including hpisting and laying not exceeding 25mm. thick with proper packing and required slope, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect as per specification and direction of the Engineer-in-charge. |
| 911 | Supplying all labour, T&P and materials and finishing walls withtwo coats of weather coat over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 912 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 913 | CONSTRUCTION OF COMPOUND WALL FOR PUMP HOUSE |
| 914 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 915 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 916 | Supplying all labour, T&P and materials and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 917 | Supplying all labour, T&P and materials and providing 1\" thick D.P.C. over stone metal with cost, conveyance, tax, royalty of materials required and as per specification and direction of the Engineer-in-charge. |
| 918 | Supplying all labour, T&P and materials and providing brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 919 | Cost of MS Grill Gate |
| 920 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per the direction of the Engineer-in-charge |
| 921 | Supplying all labour, T&P and materials and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 922 | Supplying all labour, T&P and materials and providing 20mm. thick cement plaster in cement mortar (1:6) for stone workand conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 923 | Supplying all labour, T&P and materials and finishing walls withweather coat of approvedpaint over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 924 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 925 | PUMPING UNIT |
| 926 | Supplying installing, testing & commissioning of suitableVerticalSumersible pumping set of any repurted make such as KSB/Crompton/Greaves/ Kirloskar CRI/Suguna etc with energy efficient motor with ISI mark to run in3 phase AC supply capble to discharge clear water from Production well @2.82 Lps against a total head of 90 mtrs. etc. All complete as per direction of Engineer in Charge. |
| 927 | Supplying Testing ,and installation of suitable control pannel Boardfor suitablesubmerssible pump and motor set with reputed ISI make. |
| 928 | Make BCH/L & T/Havels |
| 929 | Supplying, fitting & testing of 4mm2 three core flat submerssible electric cable reputed ISI make Finolex/BCH/Havells |
| 930 | Required assessories like G.I R/S, stainless Steel nipple, G.I bend,wire ropw allof heavy quality with M.S calmp, MS bore cover etc. as required at site to complete the installation of the pimp set etc.complete in all respect. |
| 931 | Supplying of 50 mm dia HDPE suction pipe for lowering of pump & motors etc |
| 932 | SITE DEVELOPMENT |
| 933 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 934 | In all kinds of soil : |
| 935 | INTERNAL ELECTRIFICATION |
| 936 | Supplying the following materials ,required labour and T &P and providing internal electrification to pump house as required at site including commisioning and testing as per the direction of the Engineer in Charge. |
| 937 | Surface wiring to light point in 20mm dia PVC cond. Pipe on MS board wiyh 3mm thick mulltistand copper wire. |
| 938 | Short point |
| 939 | Medium point |
| 940 | Surface wiring to 3pin 5A plug point in 20m dia pvc conduit on existing board . |
| 941 | surface wiring to 3pin 5A plug point in 20m dia pvc conduit on existing board . |
| 942 | Medium point |
| 943 | B.H. Fitting including all connection. |
| 944 | 63 AMP 440 V ICTPN main switch |
| 945 | 3 nos 63 Amp kitkat fuse on MS Board. |
| 946 | 32 Amp main switch with all connections |
| 947 | Sub- main wiring 4 x 4mm2 copper wire with in 20mm dia pvc conduit. |
| 948 | Sub- main wiring 2 x 2.5mm2 copper wire with in 20mm dia pvc conduit. |
| 949 | Standard earthing in 38mm dia 3mtr long GI pipe with No 8 GI wire including all connections. |
| 950 | 4\" x 40 W F.L. Fitting complete with tube. |
| 951 | 25 x 5 mm thick iron FL frame covered with GI sheet with painting , ( 6.5 ft x 2.5 ft ) embeded on wall with all consumable materials like cement chips painting etc including all connections with PVC paint, flexible pipe,copper cable etc. |
| 952 | 15 Amp switch and socket on 10 x 12 size MS board with all connections |
| 953 | RYB phase indicator with control 5 Amp F.T. switch with all connection. |
| 954 | 5 Amp plug point on separate board fixed with 7\" x 4\" MS box with lylem cover with necessary connection. |
| 955 | Short point |
| 956 | 10mm2 4 core cable |
| 957 | Ceiling Fan |
| 958 | 5YEAR OPERATION & MAINTENANCE |
| 959 | CostofOpernation & maintenance as per term & condition and technical specification mentioned in SBD. |
| 960 | PIPEWATER SUPPLY TOGURUJIGUDA |
| 961 | CONSTRUCTION OF 20,000 LTR RCC OGR |
| 962 | Designing , construction, testing and commissioning of 20,000 ltr capacity circular shape flat bottom with domb shape RCCon the groundreservoir including supplying , fitting, fixing of M.S and aluminuim ladder ,water level indicator, lightening arrester 1 nos. 80 mm CI puddle collar-4, 2 nos. CI MH cover, Inlet & Outlet arrangement with 80 mm dia GI pipe - 12 mtr and soil testing & drawing design etc. testing of the joints all complete fitting and fixing,80 CI sluice valves-1 No, Sluice valve chamber -1 nosof standard make providing CC M-25 for RCC work with 20mm& down grade size hg chips with 20mm thick cement plater over the cement concrete work, cement punning over plaster surface and painting 2 coats of water proofingweather coat etc. all complete as per approved drawing and design as per direction of Engineer-in-Charge. |
| 963 | CONSTRUCTION OF COMPOUND WALL FOR OGR |
| 964 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 965 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 966 | Supplying all labour, T&P and materials and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 967 | Supplying all labour, T&P and materials and providing 1\" thick D.P.C. over stone metal with cost, conveyance, tax, royalty of materials required and as per specification and direction of the Engineer-in-charge. |
| 968 | Supplying all labour, T&P and materials and providing brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 969 | Cost of MS Grill Gate |
| 970 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per the direction of the Engineer-in-charge |
| 971 | Supplying all labour, T&P and materials and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 972 | Supplying all labour, T&P and materials and providing 20mm. thick cement plaster in cement mortar (1:6) for stone workand conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 973 | Supplying all labour, T&P and materials and finishing walls withweather coat of approvedpaint over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 974 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 975 | LAYING OF RISINGMAIN & DISTRIBUTION SYSTEM |
| 976 | Earth work in excavation of trenches for laying of pipe line including dressing, leveling the bed upto required depth & within initial lead of 50mtrs & 1.5mtrs initial lift breaking clods to maximum size (5 to 7cm) laying in layers not exceeding 0.30mtrs in depth etc. complete including cost of all labour, T&P, pipes, fittings and specials etc.required for completion of the item as per specification & direction of Engineer in charge. |
| 977 | In all kind of Soil : (1000 mtr x 0.38mtr x 0.90mtr) |
| 978 | In Stoney Earth : (1150 mtr x 0.38mtr x 0.90mtr) |
| 979 | Transporting and supplying all materials, labour T&P, fabricating, fitting and fixing with specials at the site using Electric resistance welded pipes of reputed make (TATA /Zindal ), confirming to IS 1239 (P-1) 2004, IS 1978 & IS 3598, medium quality & standard weight, including cutting the pipes & flanges, drilling the bolt holes in the flanges, matching the pipes and flanges and jointing with proper gradient & alignment, welding with arc welding using electrodes with power generated by using mobile diesel generator set, etc. complete as per direction of Engineer in charge, including painting two coats with black anti-corrosive paint over one coat of primer, all cost, conveyance, taxes of paints, cost of fittings as \"T\", Bend, Offsets, Nuts and bolts, Leather packing etc. but including the cost of flanges and required earthwork, cutting holes in masonry works etc. |
| 980 | 80 mm dia G.I pipe |
| 981 | Supplying all materials including HDPE pipes, fittings and specials, labour, T&P for laying in trenches unplasticised HDPEpipes of the following outside diameter for all classes and specials as required at site, including jointing with solvent cement by non heat application method excluding the cost of earth work in excavation but including the cost of pipescost of fitting and specials& testing the pipe line etc. all complete as per direction of Engineer-in-charge. |
| 982 | 90 mm HDPEPipe PE-80 PN-6 |
| 983 | Supplying all labour, T&P for filling excavated earth in the pipe line trenches by laying in layers not exceding 9\" (225mm) including watering and ramming as per the directionEngineer-in-charge. |
| 984 | In all kinds of soil : |
| 985 | In Stoney Earth : |
| 986 | Supplying all labour T&P fitting and fixing of CI sluice valves with double flanged ends in the water line for controlling purposes conforming to IS:14846-2000 for the following rating and nominal diameters as per specifications complete of approved make with supply of all joining materials, T&P etc all complete including testing as per specicication complete |
| 987 | 80 mm dia CI Sluice Valve IS- 14846/2000 PN-1.00 |
| 988 | 80 mm dia CI NR Valve IS- 14846/2000 PN-1.00 |
| 989 | 15 mm dia CISingle Air Valve IS 14845/2000 |
| 990 | Supplying all labour, material, T&P and constructing brick masonry valve chambers of following mentioned inetrnal dimension, complete with C.C (1:4:8) with 40 mm size hbg metal at the bottom, C.B brick masonry in c.m(1:4) with internal plastering and R.C.C top cover with C.C(1:2:4) with 12mm size hbg metal & MS Rod 0.85qntl per 1 cum and with 12mm thick cement plaster (1:4)complete in all respect as per the direction of the Engineer-in-charge. |
| 991 | SluiceValve/NR Valve Chamber (Size 0.90mtr x 0.90 mtr x 1.15 mtr) |
| 992 | Air Valve Chamber(Size 0.75mtr x 0.75mtr x 1.15mtr) |
| 993 | Supplying all labour, T&P and dismantling of concrete road/Metalled road/Asphalt roads for laying of pipe line and making good to the damagesas per approved design and specification. |
| 994 | Supplying all wirks labour T&P for making of concrete road with CC(1:4:8) work using 4 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respect as per specification and direction of the Engineer in Charge. |
| 995 | Supplying all wirks labour T&P for making of concrete road with CC(1:2:4) work using 12 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respect as per specification and direction of the Engineer in Charge. |
| 996 | Supplying all labour T&P laying of pipe line to each house hold including cost of PVC/GI pipe, saddle of required size, 1/8\"(3mm) brass ferrule and bib cock at the end of supply line including excavation trenches and making good the damages etc complet as per direction of Engineer in Charge as approved design and specification. |
| 997 | Along the pipe line |
| 998 | Opposie side of pipe line |
| 999 | Supplying all wirks labour T&P for making of platform of size(0.45x0.45x0.10) for FHTC with CC(1:2:4) work using 12 mm size hard blaxk broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respectas per specification and direction of the Engineer in Charge. |
| 1000 | Supplying all labour T&P and materials such as 1000 liter capacity syntex tank, GI pipe of 15 mm 20 mm 25 mm size of medium quality with ferrule cock , FWV etc for water supply to AWC, UP School, GP office, medical etc with provision of staging for PVC tank complete. (Detailed estimateattached) |
| 1001 | Supplying all labour Materials, T&P for construction of MS display board 1.50m x 1.20 m etc. Complete as per direction of the Engineer-in-Charge. |
| 1002 | CONSTRUCTION OF PUMP HOUSE |
| 1003 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soilwith all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 1004 | Supplying all labour, T&P and materials and providing Cement Concrete (1:4:8) in foundation and plinth with 4cm. H.G.Stone metalwith cost, conveyance, royalty, taxes of all materials required for the work as per specification & direction of the Engineer-in-charge. |
| 1005 | Providing cement concrete M-25 for RCC work with 20mm and down gred size hg chips including hoisting and laying etc. complete excluding cost of MS rod including rigid and smoth centering and shuttering for RCC work includingfalse works and dismentaling after casting as per direction of Engineer-in-charge. |
| 1006 | RCC Column & Beam |
| 1007 | Supplying, filling in foundation & plinth with sand in 15cms. (9\") thick layers with the cost conveyance royalties, taxes of the materials complete as per specification and direction of the Engineer-in-charge |
| 1008 | Supplying all materials, labour, T&P and providing R.R. H.G.Stone masonary with C.M.(1:6) in foundation and plinth with granite stone including cost, conveyance, labour, tax, royalty of materials to worksite complete as directed by the Engineer-in-charge. |
| 1009 | Supplying all materials, labour, T&P and providing Brick work with C.B Bricks in c.m (1:6) in superstructure using well burnt C.B bricks of size 23cm x 11cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. |
| 1010 | Supplying all materials, labour T&P providing R.C.C. (1:2:4) workusing 12mmsize hard black hand broken granite stone chipsincluding cost conveyance taxes and royalty of all materials and labour with T&P required for the work etc, complete in all respect but excluding cost of MS Rods or Tor Steel and binding wires of 18 to 20 gauge as perincluding the cost of required quantity of centering and shuttering as per the dirction of the Engineer in Charge. |
| 1011 | Lintel |
| 1012 | Chajja |
| 1013 | Beam |
| 1014 | Slab |
| 1015 | Straightening bend up or coiled rods cutting bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor Steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works including cost, conveyance and taxes of M.S. Rods or Tor Steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc, complete in all floors as per specification and direction of the Engineer-in-charge. |
| 1016 | Cost of M.S doors and windows: |
| 1017 | Labour forfitting & fixing M.S. choukath to door & windows including making holes in the brick wall and fixing the clamps by using C.C (1:2:4) by using 12mm. size h.b.g chips with all cost, conveyance, labour, T&P etc., required for the work complete as per specification and direction of the Engineer-in-charge. |
| 1018 | Supplying all materials, labour, T&P and providing 12mm (1/2\") thick cement plaster (1:6) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge. |
| 1019 | Supplying all materials, labour, T&P and providing C.C. (1:2:4) workusing 12mmsize hard black broken granite stone chips including cost, conveyance, royalty & taxesetc, complete in all respect but excluding cost of M.S. Rods or Tor Steel and binding wires of 18 to 20 gaugeas per specification and direction of the Engineer-in-charge. |
| 1020 | Providing, fixing tiles in dados skirting and risers of steps on 12mm. thick cement plaster(1:3) jpinted with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge. |
| 1021 | Providing & fixing (Glazed) tiles in all floor & treads of steps & landing on 25 mm thick bed of cement mortar in proportion (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge. |
| 1022 | Supplying all materials, labour, T&P and providing 20mm (3/4\") thick cement plaster (1:6) finished smooth to out side of stone work after raking out the joint including, watering and curing with cost and conveyance of all materials and labour with T&P ,all taxes and royalties etc., complete in all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 1023 | Supplying all material, labour, T&P and providing grading concrete with C.C(1:2:2) using 06mm. Size hard stone broken chips of approved quality including hpisting and laying not exceeding 25mm. thick with proper packing and required slope, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect as per specification and direction of the Engineer-in-charge. |
| 1024 | Supplying all labour, T&P and materials and finishing walls withtwo coats of weather coat over a coat of white wash with good shell limewith cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, completein all respect in all floors as per specification and direction of the Engineer-in-charge. |
| 1025 | Painting two coats with any approved paintto new wood work and iron work over one coat of priming including sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect including the the cost of appoved paint as per specification and direction of the Engineer-in-charge. |
| 1026 | PUMPING UNIT |
| 1027 | Supplying installing, testing & commissioning of suitableVerticalSumersible pumping set of any repurted make such as KSB/Crompton/Greaves/ Kirloskar CRI/Suguna etc with energy efficient motor with ISI mark to run in3 phase AC supply capble to discharge clear water from Production well @3.00 Lps against a total head of 110 mtrs. etc. All complete as per direction of Engineer in Charge. |
| 1028 | Supplying Testing ,and installation of suitable control pannel Boardfor suitablesubmerssible pump and motor set with reputed ISI make. |
| 1029 | Make BCH/L & T/Havels |
| 1030 | Supplying, fitting & testing of 4mm2 three core flat submerssible electric cable reputed ISI make Finolex/BCH/Havells |
| 1031 | Required assessories like G.I R/S, stainless Steel nipple, G.I bend,wire ropw allof heavy quality with M.S calmp, MS bore cover etc. as required at site to complete the installation of the pimp set etc.complete in all respect. |
| 1032 | Supplying of 50 mm dia HDPE suction pipe for lowering of pump & motors etc |
| 1033 | SITE DEVELOPMENT |
| 1034 | Supplying all labour, T&P and materials for earth work excavation in foundation in all kinds of soil with all lead & lift including dressing the sides & levelling the bed of the foundationas directed by the Engineer-in-charges complete as per specification & direction of the Engineer-in-charge. |
| 1035 | In all kinds of soil : |
| 1036 | INTERNAL ELECTRIFICATION |
| 1037 | Supplying the following materials ,required labour and T &P and providing internal electrification to pump house as required at site including commisioning and testing as per the direction of the Engineer in Charge. |
| 1038 | Surface wiring to light point in 20mm dia PVC cond. Pipe on MS board wiyh 3mm thick mulltistand copper wire. |
| 1039 | Short point |
| 1040 | Medium point |
| 1041 | Surface wiring to 3pin 5A plug point in 20m dia pvc conduit on existing board . |
| 1042 | surface wiring to 3pin 5A plug point in 20m dia pvc conduit on existing board . |
| 1043 | Medium point |
| 1044 | B.H. Fitting including all connection. |
| 1045 | 63 AMP 440 V ICTPN main switch |
| 1046 | 3 nos 63 Amp kitkat fuse on MS Board. |
| 1047 | 32 Amp main switch with all connections |
| 1048 | Sub- main wiring 4 x 4mm2 copper wire with in 20mm dia pvc conduit. |
| 1049 | Sub- main wiring 2 x 2.5mm2 copper wire with in 20mm dia pvc conduit. |
| 1050 | Standard earthing in 38mm dia 3mtr long GI pipe with No 8 GI wire including all connections. |
| 1051 | 4\" x 40 W F.L. Fitting complete with tube. |
| 1052 | 25 x 5 mm thick iron FL frame covered with GI sheet with painting , ( 6.5 ft x 2.5 ft ) embeded on wall with all consumable materials like cement chips painting etc including all connections with PVC paint, flexible pipe,copper cable etc. |
| 1053 | 15 Amp switch and socket on 10 x 12 size MS board with all connections |
| 1054 | RYB phase indicator with control 5 Amp F.T. switch with all connection. |
| 1055 | 5 Amp plug point on separate board fixed with 7\" x 4\" MS box with lylem cover with necessary connection. |
| 1056 | Short point |
| 1057 | 10mm2 4 core cable |
| 1058 | Ceiling Fan |
| 1059 | 5YEAR OPERATION & MAINTENANCE |
| 1060 | CostofOpernation & maintenance as per term & condition and technical specification mentioned in SBD. |
AI Tender Summary
Tender Timeline
Jan 24, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJan 31, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 02, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender