Infrastructure Strengthening Of Sub-Centre To Hwc At Howrah Bikihakolagp Hq,Panchla Infrastructure Strengthening Of Sub-Centre To Hwc At Howrah
Tender Value
7.91 Lakhs
Estimated cost
Bid Submission
31 Jan 2022
0 days left
EMD
15822
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
panchla → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Infrastructure Strengthening Of Sub-Centre To Hwc At Howrah Bikihakolagp Hq,Panchla Infrastructure Strengthening Of Sub-Centre To Hwc At Howrah
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling all types of masonry excepting cement concrete plain of reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.a) In ground floor including roof. |
| 2 | Labour for chipping of contrete surface before taking up plastering work. |
| 3 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75 m. as directed. |
| 4 | Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size)excluding shuttering and reinforcement, if any,in ground floor as per relevant IS codes.(a) Pakur Variety. |
| 5 | B/W (b) In superstructure, ground floor |
| 6 | 125mm thick brick work with 1st class brick in cement mortar (1:4) in ground floor. |
| 7 | Shuttering above G.L |
| 8 | Reinforcement for reinforced concrete work |
| 9 | Fl. Tiles |
| 10 | Wall tiles |
| 11 | A.S.F |
| 12 | Plaster(to wall,floor,ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed & raking out joints including throating, nosing & drip course, scaffolding/staging where necessary (ground floor).[Excluding cost of chipping over concrete surface](ii) With 6:1 cement mortar |
| 13 | (b) 15 mm. thick plaster (1:4) |
| 14 | 1.5 mm thk. Neat cement punning |
| 15 | M.S. or W.I. ornamental grill |
| 16 | Supply, fitting & fixing steel windows without integrated grills. |
| 17 | Wood work |
| 18 | Flush door |
| 19 | Clamp |
| 20 | Iron butt hinge |
| 21 | Supplying, fitting & fixing aluminium D handle |
| 22 | Supplying, fitting & fixing aluminium tower bolt |
| 23 | Supplying, fitting & fixing brass hasp bolt |
| 24 | Supplying,fitting & fixing factory made P.V.C.door frame of size 50mmx47mm with a wall thickness of 5mm,made out of extruded 5mm,PVC sheet miter cut at two corners & joined with two nos of 1.5mm long brackets of 15mmx15mm M.S.Square tube.The two vertical door profiles are to be reinforced with 19mmx19mm M.S. Square tube of 19 guage,wheather seal to be provided through out the frame.The door frame shall be fixed with the wall using 65/100mm long M.S.screws through the frame by using P.V.C.fasteners.A minimum of 4 nos of screws to be provided for each vertical member & minimum 2 nos for horizental member etc.complete as per Manufacturer\"s specification & direction of Engineer-In-Charge. |
| 25 | Supplying,fitting & fixing 30mm thick double leaf factory made solid panel PVC door shutter consisting of outer frame made out of M.S. tubes of 19 guage thickness & size 19mmx19mm for styles,top & bottom rails,M.S.frame shall have cost of steel primers of approved make & manufacture,M.S.frame covered with 5mm th.heat moulded PVC \"C\" channel of size 30mm th,70mm width out of which 50mm shall be flat & 20mm shall be tapered in 45 degree angle on either sides forming styles;& 5mm th.95mm wide PVC sheet out of which 75mm shall be flat & 20mm tapered in 45 degree on the inner side to form top & bottom rail & 115mm wide PVC sheet out of which 75mm shall be flat & 20mm shall be tapered on both sides to form lock rail.Top,botom & lock rail shall be provided either side of the panel with 10mm (5mmx2) th.,20mm wide cross PVC sheet as gap insert for top rail & bottom rail.Paneling of 5mm th.both side PVC sheet to be fitted in the M.S.frame wealded/sealed to the styles & rails with 7mm (5mm+2mm) th.x 15mm wide PVC sheet bending on inner side additional 5mm th. PVC strip of 20mm which is to be stuck on the interior side of the \"C\" channel using PVC solvent adhesive etc.complete excluding all necessary hardwares as per direction of Engineer-In-Charge.In ground floor |
| 26 | Scraping |
| 27 | Distempar |
| 28 | Red oxide |
| 29 | Oil bound primer |
| 30 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface,if necessary:(b) On steel or other metal surfaceWith other than hi-gloss of approved quality(iii) One coat (with any shade except white) |
| 31 | (b) Priming one coat on timber,plastered surface with synthetic oil bound primer of aproved quality(a) Priming one coat on timber,plastered surface |
| 32 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of EIC to be applied over acrylic primer as required.The rate includes cost of material, labour,scaffolding and all incidental charges but excluding the coat of primer.In Ground floor (Two Coat)a) Normal Acrylic Emulsion |
| 33 | Bordering |
| 34 | Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame and refixing the same including mending good all damages complete:(Concrete and brick work for mending damage will be paid separately)(b) Above area 2.5 Sq.m. |
| 35 | Window frame |
| 36 | Window shutter |
| 37 | Antitermite treatment. |
| 38 | Sign board |
| 39 | Sanitary & Plumbing |
| 40 | Electrical (Minor reparing work on existing) |
| 41 | GST |
| 42 | Labour welfare cess |
| 43 | Add contigency 3% |
AI Tender Summary
Tender Timeline
Jan 24, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJan 31, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 03, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender