2. Renovation And Repair Work At Ashay Sthal At Old Bus Stand In Lalbagh, Nathdwara 2. Renovation And Repair Work At Ashay Sthal At Old Bus Stand In Lalbagh, Nathdwara
Tender Value
10 Lakhs
Estimated cost
Bid Submission
08 Feb 2022
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nathdwara → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
2. Renovation And Repair Work At Ashay Sthal At Old Bus Stand In Lalbagh, Nathdwara 2. Renovation And Repair Work At Ashay Sthal At Old Bus Stand In Lalbagh, Nathdwara
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling old plaster or skirting raking out joints and cleaning thesurface for plaster including disposal of rubbish to the dumpingground within 50 metres lead. |
| 2 | Dismantling of existing structures like culverts, bridges, retaining walls, CC road and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by Engineer.Lime Concrete, cement concrete grade M-10 (1:5:10) and below |
| 3 | Dismantling Brick / Tile work In cement mortar |
| 4 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 5 | Brick work with FPS bricks of class designation 75 in foundation and plinth in: Cement mortar 1:6 (1 cement :6 coarse sand) |
| 6 | Half brick masonry with FPS bricks of class designation 75 in superstructure above plinth level upto two stories. Cement mortar 1:4 (1 cement :4 coarse sand) |
| 7 | Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 12 mm cement plaster of mix : |
| 8 | Wall painting with plastic emulsion paint of approved brand andmanufacture to give an even shade:Two or more coats on new work |
| 9 | P & F indian type white glazed viterous china 1st quality W.C. orissa pan (I.S:2556 Mark) kwith 100 m vitreouts china P or S trap including cutting and making good the wall and floor. Size 580 x 440 mm |
| 10 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm. |
| 11 | SS wire gauge with average width of aperture 1.4 mm on bothdirections with wire of dia 0.63 mm |
| 12 | Structural steel work riveted, bolted or welded in built up sections,trusses and framed work, including cutting, hoisting, fixing in positionand applying a priming coat of approved steel primer all complete: |
| 13 | Providing and laying in position specified grade of reinforced cementconcrete excluding the cost of centring, shuttering, finishing andreinforcement - All work upto plinth level : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 14 | Centring and shuttering with plywood or steel sheet upto two storiesor height upto 7.5 metre above plinth level including strutting,propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 15 | Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 16 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets,columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 17 | Random rubble masonry with hard stone in foundation and plinth Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 18 | Extra for random rubble masonry with hard stone in superstructureabove plinth level and upto two stories. |
| 19 | Reinforcement for R.C.C. work at all levels including straightening,cutting, bending, placing in position and binding all complete. Cold twisted bars |
| 20 | Providing and fixing white vitreous china wash basin includingmaking all connections but excluding the cost of fittings :Angle back wash basin of size 400x400mm |
| 21 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). |
| 22 | Providing and fixing 1st quality ceramic glazed vitrified tiles of colour standard white, grey, ivory, fume, red brown, light green, light blue, and other light shades with water absorbtion less than or equal to 0.08% confirming to IS : 13753 & IS : 15622 in floor, steps etc laid on bed on neat cement slury finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the the cost of cement plaster on wall and pillar) size 600mm x 600mm |
| 23 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitablelocking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 24 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore. |
| 25 | Providing and fixing brass stop cock of approved qualit 15 mm nominal bore. |
| 26 | 110 mm ID/ND PVC-U pipes (stiffness class SN 8) as per IS 15328 |
| 27 | 110 mm dia U-PVC double/ single socketed 90° bend (class III, 6kg/sqcm) confirming to IS:7834 |
| 28 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc.,(A)15 mm nominal outer dia .Pipes |
| 29 | (B)20 mm nominal outer dia .Pipes |
| 30 | Granite stone of any colour and shade. |
| 31 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge . (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 5.50 mm thickness |
| 32 | Providing and fixing PTMT Bottle Trap forWash basin and sink.Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. |
| 33 | P.T.M.T. Bottle Trap 38/40MM |
| 34 | Providing and fixing external grade board solid core single leaf flushdoor shutters ISI 2202-67 marked using Phenol formal dehyderesinin glue both sides including approved ISI marked Stainless Steel butthinges fittings with necessary screws complete as per annexure \"A\" :Decorative teak veneer One side |
| 35 | Extra for Providing and fixing flush doors with decorative veneering on one side |
| 36 | Providing and applying plaster of paris putty of 2 mm thickness overplastered surface to prepare the surface even and smooth complete |
| 37 | Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100mm with 1/2\" BSP thread and shapes. Weighing not less than 60 gms. |
| 38 | Providng & fixing PTMT urinal cock of approved quality |
| 39 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers. |
| 40 | Making connection of GI Pipedistribution branch with GI main of following size.A. 25mm to 40mm Nominal Bore |
| 41 | B. 50mm to 80mm nominal boare |
| 42 | Providing and fixing PTMT Ball cock of approved quality, colour andmake complete with Epoxy coated aluminium rod with L.P./ H.P.H.D.plastic ball.15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. |
| 43 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. A. 2 x 1.5mm |
| 44 | B. 2 x 2.5 sqmm |
| 45 | Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing /panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) :For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 46 | For shutters of doors, windows & ventilators including providing andfixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately).Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 47 | Providing and fixing aluminium tubular handle bar 32 mm outer dia,3.0 mm thick & 2100 mm long with SS screws etc .complete as perdirection of Engineer-in-Charge. Anodized (AC 15 ) aluminium tubular handle bar |
| 48 | Providing and fixing 100mm brass locks (best make of approvedquality) for aluminium doors including necessary cutting and makinggood etc. complete. |
| 49 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it\"s accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & falce ceiling point, 6 A switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required.(i) Short point (up to 3 mtr.) |
| 50 | (ii) Medium point (up to 6 mtr.) |
| 51 | (iii) Long point (up to 10 mtr..) |
| 52 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required.(l)1 x 1.5 sq.mm |
| 53 | (ll)1 x 2.5 sq.mm |
| 54 | (lll)2 x 2.5 sq.mm |
| 55 | (ll)2 x 4.0 sq.mm |
| 56 | Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it\"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & falce ceiling point, 6 A switch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. On board(I) Short point (up to 3 mtr.) |
| 57 | (II) Medium point (up to 6 mtr.) |
| 58 | (III) Long point (up to 10 mtr..) |
| 59 | Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked steel conduit & it\"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point, 6 A switch, 6 A socket, 3.0 mm thick phenolic laminatedsheet, zinc plated / brass screws, cup washers, bushes, check nuts, making connections, testing etc. as required.(I) Short point (up to 3 mtr.) |
| 60 | (II) Medium point (up to 6 mtr.) |
| 61 | (III) Long point (up to 10 mtr..) |
| 62 | Wiring of 6 pin 15 amp. Light power point with 4.0 sq. mm PVC insulated unsheathed solid / stranded copper conductor 1.1 kV grade of approved make in surface / recessed ISI marked pvc conduit & it\"s accessories, 18SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board , 15 A switch, 15 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, bushes, check nuts, making connections, testing etc. as required.(I) Short point (up to 3 mtr.) |
| 63 | (II) Medium point (up to 6 mtr.) |
| 64 | (III) Long point (up to 10 mtr..) |
| 65 | P & F 18 SWG Sheet steel boxes duly finished with two coats of red oxide and with earthing terminal of following sizes (nominal size) on surface or in recessed as required.75mm x 75mm x 50mm |
| 66 | 150mm x 75mm x 60mm |
| 67 | 200mm x 250mm x 75mm |
| 68 | 250mm x 300mm x 75mm |
| 69 | P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections with lugs, testing etc. as required. Triple pole Isolator. 30 A / 40 A rating |
| 70 | P & F of IP20 LED batten type light fixture made from CRCA sheet stlle housing suitable for mounting LED tube system (integral driver), Power consumption of 18W/36W, 1500/3000 lumens, system lumen efficiency 80 lm/ watt output, life time of 50000 burning hours with 70% initial lumen maintained. CCT 3000° K, 4000° K and 6000° K. 4’ LED Tube shape fixture 18W |
| 71 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mmx600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. \"B\" class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/ charcoal, testing of earth resistance as required. |
| 72 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping charact- eristic) ISI marked IS 8828(1996)]/ confor- ming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required. Double pole MCB.(l) 6 A to 32 A rating |
| 73 | (ll) 40 A to 63 A rating |
| 74 | P&F Recessed/ Surface mounting heavy duty horizontaltype sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. Single door (Three phase) 12Way |
| 75 | P & F of IP20 LED Recessed/ Surface Mounted Round/ sqaure Non Dimmable Downlight with die-cast aluminum housing & Heat sink for heat dissipation, high purity reflector with external driver having efficiency > 85% and inompliance to IEC standards. ( supplied together with luminaire) Power consumptionof =<7w/10w/8w/12w/15w/18W with100/500/750/1100/1250 lumens, system lumen, efficeancy of 70 lm / Watt or 100 lm / Watt output suitable to replace 1x18W/ 2x18w/2x26w CFL downlights, life time of 50000 Burning Hours with 70% of intial Lumen maintained. CCT 3000° K, 4000° K and 6000° K. Fixture shall be CE Compliance. LED downlight 12/15/20 W(I) LED downlight 5/6/7 W |
| 76 | (Il) LED downlight 9/10/12 W |
| 77 | (lIl) LED downlight 14/15 W |
| 78 | (lV) LED downlight 18/20 W |
| 79 | P & F of IP20 LED Ceiling/ Recessed/ suspended mounting light fixture made form CRCA sheet steel housing, high purity/ transmisivity diffuser for uniform light distrubution.High efficiency driver electronicshaving efficiency > 85% and in compliance to IEC standards.(integral driver). Power consumption of 40 W/50W/60W 3000/3300/4200 lumns, sstem lumenefficiency of 70-80 lm / Watt output suitable for 2x36W FTL/ 2x36w CFL/3x36w CFL light fixtures, life time of 50000 burning Hours with 70% intial Lumens maintained. CCT 3000° K, 4000° K and 6000° K. Fixture shall be CE compliance.Recessed mounting |
| 80 | P/Laying P.V.C/XLPE insulated & P.V.C sheathed cable of 1.1 KV grade with Copper conductor of IS: 1554 P-I/IS: 7098 P-I of Group 1of approved make in ground as per IS: 1255 including excavation of 30cm x 75cm size trench, 25cm thick under layer of sand, second class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size.(I) 36/40W LED Light 1’x4’ with acrylic/ prismatic front cover(I) 2.5sq mm. Armored 4 core |
| 81 | (Il)1.5 Sq.mm Armoured 6 Core |
| 82 | (Ill)1.5 Sq.mm Armoured 12 Core |
| 83 | Providing and fixing of fuse box size 250(H) x 200(W) x 150(D) mm with base shape accomodating the pole partly, fabricated of 1.6mm MS sheet with hinged cover, dust and vermin proof, rubber gasket, locking arrangement, duly holded with 2 nos pole clamps of 25mm x 3mm flat with nut and bolts, complete with anticorrosive treatment, finished with two coat of approved enamel paint. The box shall be provided with 2/ 4 nos copper bus bar 150 x 20 x 3mm with brass screws suitable supports,earth terminal, inter connection, brass cable gland upto 10 Sqmm size cable, 2nos 16 Amp kitkat fusecomplete in all respect. |
| 84 | P & F double ball bearing capacitor start ceiling fan of approved make complete with regulator and other accessories as required. (for estimation purpose only). 1400 mm sweep |
| 85 | 5 step fan regulator |
| 86 | P&F of capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible copperconductor ,making connections, testing etc. as required. 225 mm sweep |
| 87 | P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections with lugs , testing etc. as required.Four pole Isolator 63 A rating |
| 88 | P & F of 3.00mm PVC sheet for fan box with help of screws, cup washer as required |
| 89 | Labour charges for removing and refixing of Ceiling fan/ Exaust fan from site |
| 90 | Charges for oiling, greasing, overhauling of ceiling fan, table fan, pedestal fan irrespect to the size of fan including removing,refixing offan from site and testing etc. as required. |
| 91 | Labour charges for dismantling of surface PVC/ Steel conduit including wiring in conduit, conduit fittings and depositing the same with listing of material in store. |
| 92 | Labour charges for dismantling of surface/ recessed switch board of any size and depositing the same with listing of material in store. |
| 93 | Labour charges for dismantling of wiring in existing conduit of following size and depositing the same with listing of material in store. (l) up to 2.5 sq. mm. wire |
| 94 | (ll) 4/ 6 sq. mm. wire |
| 95 | Supply , Drawing and Testing of 4 pair , 100 ohm, 24 AWG UTP E Cat 5 Cable as per latest ammendments of TIA /EIA 568 B.2 Specifications in existing MS/PVC Conduits including making connections to Informationoutlets and Patch Panels with ferruling at both ends for identification with necessorry tools for punching, stripping, crimpping and testing required . |
| 96 | Supply and Installation of Information outlets made of high impact plastic bodyABS FR Grade with spring loaded collapsible shutters in jack Recess, suitable for Ecat 5 application complying to latest ammendments EIA/ TIA 568 B.2 specifications in existing modular /MSBoxes along with necessory connections as required. I/O\"s to have Terminator caps for toolless termination Single Outlet |
| 97 | P & F following size mounting grid plates with cover plates(I) 1/2/3 Module |
| 98 | (ll) 4 Module |
| 99 | (lll) 5-6 Module |
| 100 | (lV) 8 Module |
| 101 | (V) 16- 18 Module |
AI Tender Summary
Tender Timeline
Jan 22, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 08, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 09, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender