Providing And Fixing In Position Steel Rifle Rack, Pistol Locker, Uniform Cabinets, Dustbins And Podium Etc. At State Excise Department, Cotton Market, Nagpur ( 2Nd Call ) Providing And Fixing In Position Steel Rifle Rack, Pistol Locker, Uniform Cabinets, Dustbins And Podium Etc. At State Excise Department, Cotton Market, Nagpur ( 2Nd Call ) , Steel Rifle Rack:-Providing And Fixing In Position Rifle Rack Made Up Of Rust Proof, Colour Coated Stainless Steel Which Accommodates 20 Rifles With Separate Compartment Of Bullets. Rifle Rack Is Provided With Sturdy Openable Shutter And Heavy Duty Locking Arrangement, A. Locker Construction - Lockers To Be All Welded Construction With Exposed Welds Sanded Smooth. No Bolts, Screws Or Rivets Used In Assembly Of Locker Body. Lockers Fully Assembled, Ready To Be Installed In Place In Accordance With User’S Instructions. B. Body Of Lockers - Body Shall Be Constructed Of 1 Continuous Piece Of 16 Gauge Cold Rolled Or Hot Rolled Oiled Steel Sheet ( 304 Stainless For –Ss Models ) Back: Solid Sheet Of 16 Gauge Cold Rolled Sheet Steel Welded To Frames Of Sides ( 304 Stainless For –Ss Models ) Internal Framing & Door Stops Shall Consist Of 16 Gauge Steel Frame, Cut Out To Form A Continuous Frame Around Each Compartment Door. ( 304 Stainless For –Ss Models ) C. Frames - Each Unit Shall Be Frames With A Isa 50X50x3mm Steel Angle Frame, Welded To The Body For Surface Mount. ( 304 Stainless For –Ss Models ) D. Doors -Doors Are 16 Gauge Steel, Cut Out To Fit So The Face Is Flush With The Front Of The Cabinet. ( 304 Stainless For –Ss Models ) .Furnish A 16 Gauge Steel Compartment Body Welded To The Back Side Of Each Door To Securely Hold The Arm Line. ( 304 Stainless For –Ss Models ) . E. Locks - Each Compartment Shall Be Locked With A Master Zinc Plated Snap Lock, Bolted To The Door With Tamper Resistant Screws. F.Hinges -16 Gauge Continuous Piano Hinge Welded To The Door & Frame, Recessed Into The Frame For No Access To The Hinge Pin ( 304 Stainless For –Ss Models ) G. Finish - Complete Locker Unit To Be Thoroughly Cleaned And Sealed. Finish With Polyester Powder Coat. Including All Fixtures And Fastners, Etc. Complete As Per Approved Shade And Colour By Engineer Incharge. ( Nos. ) , Uniform Cabinet :- Providing And Fixing In Position Uniform Cabinet Made Up Of 18Mm Thick Mdf Board With Pvc Membrane Finish With 6Mm Thick Toughened Glass Shutter Provided With Locking Arrangement, Including All Fixtures And Fastners, Etc. Complete As Per Approved Shade And Colour By Engineer Incharge. ( Nos. ) , Pistol Locker: -Providing And Fixing In Position Pistol Locker Made Up Of Rust Proof, Colour Coated Stainless Steel 304For Body, Frames, Door, Lock And Hinges Which Accommodates 40 Pistols With Separate Compartment Of Bullets Within Each Locker By 16 Gauge Steel Sheet. Pistol Locker Is Provided With Sturdy Openable Door And Heavy Duty Locking Arrangement, A. Locker Construction - Lockers To Be All Welded Construction With Exposed Welds Sanded Smooth. No Bolts, Screws Or Rivets Used In Assembly Of Locker Body. Lockers Fully Assembled, Ready To Be Installed In Place In Accordance With User’S Instructions. B. Body Of Lockers - Body Shall Be Constructed Of 1 Continuous Piece Of 16 Gauge Cold Rolled Or Hot Rolled Oiled Steel Sheet ( 304 Stainless For –Ss Models ) Back: Solid Sheet Of 16 Gauge Cold Rolled Sheet Steel Welded To Frames Of Sides ( 304 Stainless For –Ss Models ) Internal Framing & Door Stops Shall Consist Of 16 Gauge Steel Frame, Cut Out To Form A Continuous Frame Around Each Compartment Door. ( 304 Stainless For –Ss Models ) C. Frames - Each Unit Shall Be Frames With A Isa 50X50x3mm Steel Angle Frame, Welded To The Body For Surface Mount. ( 304 Stainless For –Ss Models ) D. Doors -Doors Are 16 Gauge Steel, Cut Out To Fit So The Face Is Flush With The Front Of The Cabinet. ( 304 Stainless For –Ss Models ) .Furnish A 16 Gauge Steel Compartment Body Welded To The Back Side Of Each Door To Securely Hold The Arm Line. ( 304 Stainless For –Ss Models ) . E. Locks - Each Compartment Shall Be Locked With A Master Zinc Plated Snap Lock, Bolted To The Door With Tamper Resistant Screws. F.Hinges -16 Gauge Continuous Piano Hinge Welded To The Door & Frame, Recessed Into The Frame For No Access To The Hinge Pin ( 304 Stainless For –Ss Models ) G. Finish - Complete Locker Unit To Be Thoroughly Cleaned And Sealed. Finish With Polyester Powder Coat. Including All Fixtures And Fastners, Etc. Complete As Per Approved Shade And Colour By Engineer Incharge. ( Nos. ) , Podium With Logo: -Providing And Fixing In Position Podium Made Up Of 25 Mm Thick Mdf Board With Pvc Membrane Finish Having Stainless Steel Sheet 304 Matt 5 Mm Thick Logo On Front, Ideal For Auditorium Hall / Meeting Hall, Conference, Function Etc. Having Top Inclined Top Provides Ease And Convenience Of Reading During Speeches / Presentatons. Two Door Cabinets Provides Ample Storage For All Types Of Important Documents Or Small Electronics Items Like Mic Etc. With In-Built Locking Arrangement , Including All Fixtures And Fastners, Etc. Complete As Per Approved Shade And Colour By Engineer Incharge. ( Nos. ) , 1. Stainless Steel Swing Dustbin Supplying Stainless Steel Swing Shutter Dustbin Of Grade 304 Size – 1.254Mm ( D ) X711mm ( H ) 2.355Mm ( D ) X863mm ( H ) , 2. Plastic Dustbin Supplying Dustbin Made Out Of High Quality Premium Grade Uv Stabilized Virgin Polythene With Inside Out Smooth Finish. Crisscross Ribs At Bottom And Vertical Ribs At All Four Corner Side Of The Bin With Lid Having Two Side Opening. User Friendly Design Without Sharp Corners On Welds, Volumetric Capacity Of 100 Liters Approx. ( Nos. ) , Wooden Flooring :- Providing And Fixing In Position Wooden Flooring Made Up Of High Density Fiber Board Having A Grooves For Interlocking Of Planks, Plank Size Of 1215 Mm X 195 Mm X 8 Mm With 4Mm Thick Premium Mica Top, Including All Fixtures And Fastners, Etc. Complete As Per Approved Shade And Colour By Engineer Incharge. ( Per Sq. Mtrs. ) , Name Plate :- Providing And Fixing In Position Name Plate Made Out Of Stainless Steel Sheet 304 Matt2mm Thickbase Material – Acrylic, Letters Engraved With Premium Border, Complete As Per Approved Shade And Colour By Engineer Incharge.. ( Per Sq. Mtrs. ) , 1. Department Logo :-Providing And Fixing In Position Department Logo Made Out Of Stainless Steel 304 Matt 3 Mm Thick, Logo Andletters Are Embossed And Engraved With Premium Border And Colour Etc, Complete As Per Approved Shade And Colour By Engineer Incharge.. ( Per Sq. Mtrs. ) , 2. Department Logo :-Providing And Fixing In Position Department Logo Made Out Of Transparent Glass Fiber Sheet Of5 Mm Thick, Logo Andletters Are Embossed And Engraved With Premium Border And Colour Etc, Complete As Per Approved Shade And Colour By Engineer Incharge.. ( Per Sq. Mtrs. ) , Automatic Sanitizer Dispencer :-Providing And Fixing In Position Built-In Ir Sensor Touchless Sanitizer Dispenser. Dispenser Work On Both Batteries And Adapter With Two Spray Modes Easy To Adjust Their Volume With Ease. User Provided With Single And Double Spray Option With Light Indicators For Trouble Free Use. Detachable Tank With 1 Liters Of Capacity. ( Nos. ) , Notice Board :-Providing And Fixing In Position Notice Board Made Up Of 18Mm Thick Mdf Board Board With Pvc Membrane Finish With 6Mm Thick Toughened Glass Shutter Provided With Locking Arrangement, Including All Fixtures And Fastners, Etc. Complete As Per Approved Shade And Colour By Engineer Incharge. ( Nos. ) , Curtain Rods :-Providing And Fixing In Position With Curtain Rod Of 32Mm Diameter Of 18 Gauge Type 304 Stainless Steel With Chrome Finish, Highly Durable And Rustproof Quality And Brackets With Premium Finials, Etc. Complete As Per Approved Design And Colour By Engineer Incharge. ( Per Running Mtrs. ) , Incumbency Board, Map Board And Emergency Roadmap :- Providing And Fixing In Position Incumbency Board, Map Board Andemergency Roadmap Board Made Up Of 12Mm Thick Three Layered Flat Pressed Veneer Teak Wood Partical Board With One Faces Teak Venner Bonded With Phenol Formaldehyde Synthetic Resin Including Finishing With Two Coat Of Primer And Oil Paint. Complete As Per Approved Shade And Colour By Engineer Incharge. ( Per Sq. Mtrs. )
