Facade Illumination Of 4 Different Gates In Walled City Of Jaipur Facade Illumination Of 4 Different Gates In Walled City Of Jaipur
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Feb 2022
0 days left
EMD
4 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jaipur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Facade Illumination Of 4 Different Gates In Walled City Of Jaipur Facade Illumination Of 4 Different Gates In Walled City Of Jaipur
BOQ
| Sl. No. | Item Description |
| 1 | Supply, installation, testing & Commissioning of RGB linear wallwasher made of aluminium extrusion, LED Make : CREE / OSRAM /Philips /SAMSUNG, exterior-rated linear luminaire (1000mm), Input Power 18W, DMX512 with inbuilt decoder PCB for individual addressing for programming, Rated input supply of Input Voltage 24V DC, Luminaire luminous flux Minimum range 720Lm. IP protection rating : IP66. The luminaire should have multiple beam angle options : 10°, 20, 40, 60°, 10X20° ( as per site requirement ). |
| 2 | Supply, Installation, Testing & Commissioning of following Luminaries: Supply of LED spot light fixture 20W, LED, RGBW (DMX512 Compatible), IP 66. The housing should be made of high strength pressure die cast aluminium with 3-4mm thick safety glass and coated by static powder making it weather resistant.Protection screen with tempered glass with high impact resistance IK07. Voltage input DC24V . The luminaire should have options for various beam angle: 40°. Light fixture should be standard DMX512 protocol compatible, the DMX decoder function should be inbuilt the light fixture. Estimated LED Lifetime is L70-100,000 hours minimum@ 25degree Ambient Temperature and LEDs of Make : CREE / OSRAM /Philips /SAMSUNG to be used. Minimum Light fixture Lumen output atleast 800 Lumens @ full power. Operating Temperature : - 20°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. |
| 3 | Supply, Installation, Testing & Commissioning of following Luminaries: Supply of LED projector light fixture 50W, LED, RGBW (DMX512 Compatible), IP 66. The housing should be made of high strength pressure die cast aluminium with 3-4mm thick safety glass and coated by static powder making it weather resistant.Protection screen with tempered glass with high impact resistance IK07. Voltage input AC240V . The luminaire should have options for various beam angle: 10°/25°/40°/60°. Light fixture should be standard DMX512 protocol compatible, the DMX decoder function should be inbuilt the light fixture. Estimated LED Lifetime is L70-100,000 hours minimum@ 25degree Ambient Temperature and LEDs of Make : CREE / OSRAM /Philips /SAMSUNG to be used. Minimum Light fixture Lumen output atleast 2000 Lumens @ full power. Operating Temperature : - 20°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. |
| 4 | Supply, installation, testing & Commissioning of LED ground burrial 30W, 20 degree, RGB, IP67. The housing in light weight, made of high streangth die cast Aluminium and coated by static powder making it weather resistance. Protection screen in tempared glass with high impact resistance IK08. Premium thermal management by high heat conductivity Aluminium alloy and thermal fins. SS cover, precise structure and multiprotection silicon rubber seal for water proofing. Power LED module with high efficacy LEDs on MCPCB with PF>0.9, input voltage under - 277V, 50/60 Hz with inbuilt electronic power supply which offers protection against short circuit, over voltage and over current with inbuilt surge protection. Estimated LED lifetime is 70000 Hrs. at ambient temperature - 25°C. Light fixture minimum lumun output 1200Lm. |
| 5 | Supply, installation, testing & Commissioning of LED ground burrial 20W, 20 degree, 25 degree, RGB, IP67. The housing in light weight, made of high streangth die cast Aluminium and coated by static powder making it weather resistance. Protection screen in tempared glass with high impact resistance IK08. Premium thermal management by high heat conductivity Aluminium alloy and thermal fins. SS cover, precise structure and multiprotection silicon rubber seal for water proofing. Power LED module with high efficacy LEDs on MCPCB with PF>0.9, input voltage under - 277V, 50/60 Hz with inbuilt electronic power supply which offers protection against short circuit, over voltage and over current with inbuilt surge protection. Estimated LED lifetime is 70000 Hrs. at ambient temperature - 25°C. Light fixture minimum lumun output 800Lm. |
| 6 | Supply, installation, testing & Commissioning of Signal Booster/Splitter with 4-Way output for spreading and amplyfing the DMX Data signals in multiple directions, Input-220-240V AC |
| 7 | Supply, installation, testing & Commissioning of 2X512 DMX 512 Controller and synchoronization with the existing DMX controller, Input Power 5-5.5V DC 0.6A, Output Protocol DMX512, Programmability Windows, Mac OS, iOS, Android, Connections Type C USB, XLR3, Ethernet, HE20, battery Memory microSD SD & SDHC, Environment IP20. 0°C - 50°C, Buttons 10 buttons for direct access, 2 buttons to change scene, + 1 button to change zone Dimensions 160x90x45mm 268g, OS Requirements Mac OS X 10.8-10.15, Windows 7/8/10 64bit Standards EC, EMC, ROHS. |
| 8 | Supply, installation, testing & Commissioning of DMX Special cable DMX cable (single pair) having one 22AWG pair stranded (7x30) tinned copper conductors, Datalene (FHDPE) insulation, twisted pairs, overall Beldfoil shield (100% coverage) plus tinned copper braid, PVC jacketCable. Beldon make or equivalent. |
| 9 | Supply, installation, testing & Commissioning of IP67 power supply 24V output. Power consumption- 200W |
| 10 | Programming, Testing, Troubleshooting and synchronization of DMX control system . |
| 11 | Supply, installation, testing & Commissioning of Junction Box for electrical connections. 3 way junction box with glands. |
| 12 | Supply, installation, testing & Commissioning of enclosure for DMX splitter, controller: Size 450 x 300 x 250 mm, plain sides, grey cover, Degree of protection: IP 66/ IP 67, Impact strenght: IK 08, Material, base: Fiberglass reinforced polycarbonate, Material, cover: Polycarbonate, Material, cover screws: Polyamide, Material, gasket: Polyurethane, Colour: RAL 7035 |
| 13 | Supply,Installation,Testing and Commisioningof MS Structure with glavanised and PU painted for support of lights wherever projected. |
| 14 | Providing & Installation of Control panel |
| 15 | O&M of entire system |
AI Tender Summary
Tender Timeline
Jan 21, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 10, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 11, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender