Educational and Research Institute Government Departments Closing in 0 days TDR #30802284

Construction Of Cwsn Toilet At Hs Swankha ( Zone Ramgarh ) District Samba

Issued by Government Departments · Jammu, Jammu And Kashmir
Tender Value
2 Lakhs
Estimated cost
Bid Submission
27 Jan 2022
0 days left
EMD
4000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Of Cwsn Toilet At Hs Swankha ( Zone Ramgarh ) District Samba

BOQ

Name of Work:Construction ofCWSN Toilet at HS SWANKHA (Zone Ramgarh)District Samba
Sl. No. Item Description
1Earth work in excavation by manual means in trenchesfor foundations, drains, pipes, cables etc. (Not exceeding1.5 mtr in width) and for shafts, wells, cesspits and thelike not exceeding 1 Osqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in:All kind of soil.
2Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.All work upto plinth level in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)Crushed (Including all lead ,lift and carriages.)
3Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level in1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Crushed(Including all lead ,lift and carriages.)
4Providing and laying Reinforced Cement Concrete1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15° slope. excluding cost of centering and shuttering , all work upto floor V level (Including all lead ,lift and carriages.)
5Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars.
6Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth inin Cement mortar 1:6 ( 1 cement : 6 coarse sand) (Including all lead ,lift and carriages.)
7Extra for brick work in superstructure above plinth level upto floor V level. (By manual means)
8Centring and shuttering including strutting , propping etc. and removal of form work for Foundations , footings bases of columns etc. for mass concrete
9Centring and shuttering including strutting , propping etc. and removal of form work for Suspended floors, roofs, landing, balconies and access plate form
10Centring and Shuttering including strutting, propping etc and removal of form work for Edges of Slabs and Break in floors and walls (Under 20 cms wide)
116mm cement plaster to ceiling of mix 1:3 ( 1 cement :3 fine sand). (Including all lead ,lift and carriages.)
1212 mm cement plaster of mix 1:6 ( 1 cement : 6 coarse sand) (Including all lead ,lift and carriages.)
1315mm cement plaster of mix 1:6 (1 cement : 6 coarse sand) (Including all lead ,lift and carriages.)
14Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
15Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.
16Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.in (1:2:4) grade with 20mm nominal size of crushed stone aggre-gates. (Including all lead ,lift and carriages.)
17Providing and fixing Ceramic gla.z:ed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete.
18Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeer in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. .
19Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed, consolidated and grouted with fine sand including finishing the top smooth(Including all lead ,lift and carriages.)
20Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade New steel work (two or more coats)
21Distempering with 1st quality acrylic washable distemper(ready made) of approved manufacturer and of required shade/ colour complete as per manufacturer\"s specifications Two or more coats on new work
22Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied@ 3.84 kg/1 Osqm
23Providing and fixing on wall face unplasticisedrigid pVC rain water pipes conforming to IS 13592 typeA including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. 110 mm diameter .
24Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.:INTERNAL WORK-Exposed on wall 15 mm dia NOMINAL Bore
25Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.:INTERNAL WORK-Exposed on wall20 mm dia. nominal bore
26Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].
27Providing and fixing 1/2 horse power electric water motor pump including all fitting , complete job. (LMR) (Crompton Greaves)
28Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms15 mm nominal bore
29Supplying and fixing C.I. cover withframe for manholes 450mm
30Proving and laying in position flow trap inculding all fittings , complete job.
31Providing & fixing C.P brass angle valve for basin mixer and geyser points of approved make conforming to IS:8931 (15mm nominal bore)
32Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors.W.C. pan with lSI marked white solid plastic seat and lid.(Hindware/Cera)
33Providing and fixing wash basin with C.I/M.S brackets, 15mm C.P brass pillar taps, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China wash basin size 550x400 mm with single 15 mm C.P. brass pillar taps.(Hindware/Cera)
34Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back ,for the reception of pipes and fittings
35Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
36Providing & fixing C.P brass bib cock of approved quality conforming to IS:8931.(15mm nominal bore)
37Providing and fixing grating including all fitting complete.
38Providing and fixing water spray jet for water closet including all fittings coplete job.
39Providing and fixingPVC waste pipe of sink or wash basinincluding PVC waste fitting complete. 32 mm dia
40Providing and fixing uplasticised PVC connection pipe with brass union 15 mm nominal bore
41Providing and laying in position pvc drainage pipe including all fitting , complete job. 4 \" dia (Finolex/Supreme made)
42Providing and laying in position pvc drainage pipe including all fitting , complete job 3 \" dia (Finolex/Supreme made)
43Providing and fixingPVCBend 100 MM dia
44Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms
45Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.(Group B)
46Supply & fixing of Deep
47Providing & fixing LED8w, of Havells OR equivalentmake incl testing commissioning complete job

AI Tender Summary

OUR REF NO 30802284
AUTHORITY Government Departments
TENDER VALUE 2 Lakhs
LAST DATE 27-01-2022
Authority
Authority Name Rashtriya Madhyamika Shiksha Abhiyana
Work Description Construction Of Cwsn Toilet At Hs Swankha ( Zone Ramgarh ) District Samba
Basic Detail
Tender No E NIT No. 55 of 2021-22 dated 21-01-2022
Bidding Type Tender
Location
City Jammu
State Jammu And Kashmir
Key Dates
Publish Date 21 Jan 2022
Submission Date 27 Jan 2022
Open Date 28 Jan 2022
Finance
Tender Value 2 Lakhs
Tender Fee 600
EMD 4000
Exemption Not Available
Document List
be55c5bc-6328-4c7a-847f-3332cf1c0fee.html
BOQ_355344.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jan 21, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Jan 27, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jan 28, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

be55c5bc-6328-4c7a-847f-3332cf1c0fee.html

xls

BOQ_355344.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders