Repair Renovation Of Regional Office Complex At Rakh Raika, Narwal Jammu
Tender Value
5.70 Lakhs
Estimated cost
Bid Submission
28 Jan 2022
0 days left
EMD
11400
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
narwal → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Renovation Of Regional Office Complex At Rakh Raika, Narwal Jammu
BOQ
| Sl. No. | Item Description |
| 1 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. |
| 2 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 3 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 4 | Finishing walls with premium Acrylic smooth exterior paint with silicon additives of required shade. Old work (Two or more coats applied @ 1.43 liters/ 10 sqm) over existing cement paint surface. |
| 5 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 6 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigmentsetc. complete size of tile 600x600 mm. |
| 7 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid. |
| 8 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 liter capacity -White. |
| 9 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete. 32 mm dia. |
| 10 | Providing and fixing 100 mm sand cast iron grating for gully trap. |
| 11 | Providing and fixing of aluminium partitions for housing the invertor / transformer etc. on 2nd floor of the building (To be fitted on existing floor complete job) and providing and fixing aluminium wire gauge shutters for existing window glass shutters (to be fitted on existing frames complete job). |
| 12 | Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. 100mm dia. |
| 13 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 110 mm. |
| 14 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (Copuler). Bend 87.5°.110mm bend. |
| 15 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes. 110mm diameter. |
| 16 | Providing and laying in situ five course water proofing treatment with APP (Atactic Poly Propylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film, 5th top most layer shall be finished with brick tiles of class designation 100 grouted with cement mortar 1:3 (1 cement : 3 Fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). |
| 17 | Engagement of plumber for repair to plumbing items at different places in the office building. |
| 18 | Engagement of Electrician for repair to electric installations at different places in the office building. |
| 19 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. |
| 20 | Add for cost of electric fittings items :- |
| 21 | Electric switches |
| 22 | Electric plugs.(a) 5 Amp. |
| 23 | Electric plugs.(b) 25 Amp. |
| 24 | Electric bulbs. |
| 25 | Electric holders |
| 26 | Add for cost of G.I fitting and pipe for water tank. |
| 27 | Elbow. |
| 28 | Socket |
| 29 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work-Exposed on wall. |
| 30 | 20 mm dia. nominal bore (Medium). |
| 31 | 25 mm dia. nominal bore (Medium). |
| 32 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 20 mm nominal bore. |
| 33 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. |
| 34 | 20 mm nominal bore, weighing not less than 40gms |
| 35 | 25 mm nominal bore, weighing not less than 62gms |
AI Tender Summary
Tender Timeline
Jan 21, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJan 28, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 29, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender