Public Works Department-PWD has published Construction Of Govt. Sr. Secondary School Dhadi Rawat Tehsil Jubbal Distt Shimla H.P Sh Civil Work Including Ws And Si, And Site Development Etc.. Submission Date for this Tender is 28-01-2022. Land Development Tenders in jubbal Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means manual means in foundation trenches or drainsup to all depth, including dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soilupto dumping site which will be arranged by the contracto himself at his own costincluding carriage in all leads and lifts by mechanical or manual means up to entire satisfaction of Engineer in Charge |
| 2 | Centering and shuttering including strutting, propping etc. and removal of form up to all heights and floor levels including carriage of materials in all leads and lifts by mechanical or manual means.. for:- with steel plates 3.15 (Three point One Five ) millimeters thick welded with angle iron in frame 30*30*5 (Thirty into Thirty into Five ) millimeters, so as to give a fair finishwithin all leads, lifts and other incidental charges as per HP PWD/CPWD specifications or as directed by Engineer in Charge. |
| 3 | Foundation footing and basis of columns, etc. and mass concrete. |
| 4 | Suspended floors, roofs, landings, balconies and access platform |
| 5 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 6 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 7 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 8 | Providing and laying cement concrete 1:4:8 (One Cement : Four coarse sand : Eight gradedstone aggregate 40 mm (Forty milimeter) nominal size) mechnical mixed and curing complete including cost of centring and shuttering in Foundation and plinthas required complete including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 9 | Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7within all leads, lifts and other incidential charges as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 10 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) including carriage of materials in all leads and lifts by mechanical or manual meansper HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 11 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses,plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement (i)1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size)including carriage of materials in all leads and lifts by mechanical or manual means.per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1cement : 1.5 coarse sand) : 3 graded stone aggregate including carriage of materials in all leads and lifts by mechanical or manual meansper HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 13 | Steel reinforcement for R.C.C. work including straightening cutting, bending, placing in position and bindig all complete above plinth leve (i) Thermo-Mechanically Treated bars of grade i.Fe-500D or more including carriage of materials in all leads and lifts by mechanical or manual means complete per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 14 | Structural steel work in single section, welded and fixed with or without connecting plate such as Door, window chowkhats etc. and the like,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of materials in all leads and lifts by mechanical or manual means as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. . |
| 15 | Providing and fixing ISI marked Factory made flush door shutters 35 mm thick ( commercial Board) conforming to IS : 2202 (Part I) non-decorative Phenol bonded Termite resistant and boiling water proof core of block board construction with full frame of first class hard wood and well matched commercial three ply veneer with vertical grains or cross andof Centuary ply boards Ltd./ Kit Ply/ Green ply or its equivlent as per Arch. drawing including carriage of materials in all leads and lifts by mechanical or manual means.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 16 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws including carriage of materials in all leads and lifts by mechanical or manual means. :(i) 35 mm thick shutters with ISI marked M.S. pressed butt hingesbright finished of required size.(i) Second class Deodar wood complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 17 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6(1 cement : 6 coarse sand) including carriage of materials in all leads and lifts by mechanical or manual means complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 18 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. In Cement mortar 1:4 (1 cement :4 coarse sand including carriage of materials in all leads and lifts by mechanical or manual means complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 19 | Supplying, filling, spreading & leveling (compacting) stone boulders of size range 5 cm to 10 cm, in soling under floor /recharge pit, in the required thickness, including carriage of materials in all leads and lifts by mechanical or manual means, complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 20 | 40mm (Forty milimeter) meter thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. Complete including carriage of materials in all leads and lifts by mechanical or manual means.complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 21 | Kota stone slab flooring of 55 cm x55 cm size of uniform color over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) including carriage of materials in all leads and lifts by mechanical or manual means. (i) 25 mm thick complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 22 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 23 | Providing and fixing Ist quality ceramicglazed wall tiles of size 30x45 cm conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of materials in all leads and lifts by mechanical or manual means complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. . |
| 24 | 18 mm (Eighteen milimeter) cement plaster in 1:6 (1 cement: 6 coarse sand) on rough side of single or half brick / concrete block wall upto all floor level and height including carriage of materials in all leads and lifts by mechanical or manual meanscomplete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 25 | 6 mm (six milimeter) cement plaster of mix :1:3 (1 cement : 3 fine sand) including carriage of materials in all leads and lifts by mechanical or manual meanscomplete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. : |
| 26 | Providing and applyingtwo coats of white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials in all leads and lifts by mechanical or manual means complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. : |
| 27 | Distempering with 1st quality Synthetic/acrylic distemper (ready mixed)of Asian/Nerolac Paint of approved shade and colour complete as per manufacturer"sspecification .(i)Two or more coats on new work including carriage of materials in all leads and lifts by mechanical or manual means complete including carriage of materials in all leads and lifts by mechanical or manual means.complete |
| 28 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of materials in all leads and lifts by mechanical or manual means.complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. : :. |
| 29 | Providing and fixing hand rail Bombay pipe of 5 cm dia or rectangular hollow pipe section 75x40 mm of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer including carriage of materials in all leads and lifts by mechanical or manual means. :. |
| 30 | Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 31 | (i) Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of materials in all leads and lifts by mechanical or manual means.complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 32 | Providing 2.00 M.S sheet cieling, soffits of chhajas and facia welded over angle/T-iron 25x25x5 mm or as directed by the Engineer complete also applying red lead primer two coats with iron screws or as per drawing in all respect up to all floor levels including carriage of materials in all leads and lifts by mechanical or manual means. :( frame work will be paid for separately).complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 33 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 34 | Providing and fixing aluminium sliding door bolts300x16 mm(three Hundred by sixteen milimeter size) ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc.complete including carriage of materials in all leads and lifts by mechanical or manual means. : |
| 35 | (b) 250x16 mm (Two Hundred fiftyby sixteen milimeter size) |
| 36 | Providing and fixing aluminium tower bolts, 200x10 mm (Two hundredby ten milimeter Size(SI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials in all leads and lifts by mechanical or manual means. : |
| 37 | (a)100x10 mm (One hundredby ten milimeter Size |
| 38 | Providing and fixing aluminium handles 125 mm size ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, withnecessary screws etc. Complete including carriage of materials in all leads and lifts by mechanical or manual means. : |
| 39 | (ii)100 mm (Hundred milimeter size) |
| 40 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete including carriage of materials in all leads and lifts by mechanical or manual means. (i) kota stone slab 20 mm to 25 mm thickcomplete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. : |
| 41 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smoothcomplete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. : |
| 42 | Providing pre-painted corrugated G.S. sheet roofing(TATA MAKE or its equivlent as approved by the Engineer) including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including carriage of materials in all leads and lifts by mechanical or manual means. : (i) 0.61 mm thick with zinc coating not less than 275 gm/ m² complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 43 | Providing pre-painted plain G.S. sheet (TATA MAKE or its equivlent as approved by the Engineer ) ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete including carriage of materials in all leads and lifts by mechanical or manual means. :.(a)0.63 mm thick with zinc coating not less than 275 gm/m² complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 44 | Providing pre-painted plain G.S. sheet 60 mm thick with zinc coating not less than 350 gm/m²(TATA MAKE or its equivlent as approved by the Engineer)valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 45 | Providing pre-painted plain G.S. sheet (TATA MAKE or its equivlent as approved by the Engineer)fixing 30 cm wide, 30 cm deep overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete including carriage of materials in all leads and lifts by mechanical or manual means. :. (a)0.63 mm thick with zinc coating not less than 275 gm/m² complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 46 | Providing fixing 2 mm thick M.S black sheet roofing welded on angle iron frame work and flats frame work further finished with 19x19 mm/10x10mm hollow square bars from out side @ 15 cm c/c / 10 cm c/c respectively and also applying red lead primer two coats complete as per approved Architectural drawings at all heights including carriage of materials in all leads and lifts by mechanical or manual means. ( frame work of iron shall be paid separately) complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 47 | Providing 50mm thickprecast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 48 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primerincluding carriage of materials in all leads and lifts by mechanical or manual means complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. : |
| 49 | 40 mm thickRed sand stone fine robbedflooring/skirting over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), with joints 3 mm thick side buttered with cement mortor1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone and pointing with same mortor |
| 50 | Providing and fixing M.S. grills of required approved pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.(a)Fixed to steel windows by welding including carriage of materials in all leads and lifts by mechanical or manual means. : |
| 51 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required including carriage of materials in all leads and lifts by mechanical or manual means.(a)White Vitreous China Wash basin No. 10001 of size 550x400 mm with a 15 mm CP Brass single hole basin mixer of Cera ,Hindware or its equivlent make. |
| 52 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White |
| 53 | Providing and fixing white vitreous china water closet squatting pan (Indian type) :White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 54 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. |
| 55 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I.trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern including carriage complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 56 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.(a)Semi Rigid40mm dia including carriage complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 57 | Providing and fixing G.I. Union 32mm nominal bore in G.I. pipeincluding cutting and threading the pipe and making long screws etc. complete (New work)including carriage complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 58 | Providing & fixing C.P. "S" trap (heavy duty ISI marked IS:8931 & 8934) for wash basin or sinkincluding carriage complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 59 | Providing and fixing 100 mm C.P gratingfor gully/ floortrap including carriage of materialsin all leads and lifts by mechanical or manual means. complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 60 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms including carriage of materialsin all leads and lifts by mechanical or manual means. complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 61 | Providing and fixing brass ISI marked IS No.8934 of JAL/ESS ESS stop cock of approvedquality 15 mm nominal bore including carriage of materials in all leads and lifts by mechanical or manual means.complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 62 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan White solid plastic seat with lidincluding carriage complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 63 | Providing and fixing G.I. Pipes 15mm (fifteen millimetre) nominal bore complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall including carriage of materials in all leads and lifts by mechanical or manual means. complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 64 | Providing and fixing on wall face or underground waste unplasticised Rigid PVC pipes conforming to IS : 13592 (110 mm diameter overall size having 2.7 mm thickness) Type B of Supreme /Finolex makeincluding jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, including carriage of materials in all leads and lifts by mechanical or manual means. (i) Single socketed pipe complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 65 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC waste pipes conforming to IS : 13592 Type B of Supreme /Finolex make , including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including carriage of materials in all leads and lifts by mechanical or manual meanscomplete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 66 | Plain bend or required degree110mm dia (One hundred ten milimeter) including carriage complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 67 | Shoe (Plain)/Heal rest 110mm dia (One hundred ten milimeter)including carriage complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 68 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC waste pipes conforming to IS : 13592 Type B of Supreme /Finolex make , including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including carriage of materials in all leads and lifts by mechanical or manual means.Coupler/Collar 110 mm diaincluding carriage complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 69 | Providing and fixing 100mm M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameterincluding carriage complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 70 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, Sintex or its equivlent make with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including carriageof materials in all leads and lifts by mechanical or manual means. including carriage complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 71 | Providing and fixing C.P Brass pillar tap with capstan headincluding carriage complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 72 | Providing and fixing Chromium plated brass ISI marked IS No.8934 of JAL/ESS ESS make bib cock of approved quality including carriage of materials in all leads and lifts by mechanical or manual means. (i) :15 mm nominal bore complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 73 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) including carriage of materials in all leads and lifts by mechanical or manual means.:25 mm nominal bore |
| 74 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.25 mm nominal bore, 152mm long, weighing not less than 440 gms including carriage of materials in all leads and lifts by mechanical or manual means.complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 75 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge including carriage of materials in all leads and lifts by mechanical or manual means.complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 76 | Providing and fixing toilet paper holder including carriage in all leads and lifts by mechanical or manual means. :(A) C.P. Brassincluding carriage complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 77 | Providing and fixing 600x450 mm beveled edge mirror ofsuperior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete including carriage of materials in all leads and lifts by mechanical or manual means. complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 78 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc.,complete including carriage of materials in all leads and lifts by mechanical or manual means.complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 79 | Making connection of G.I. distribution branch with G.I. main of 25 to 40 mm nominal bore by providing and fixing tee, including cutting and threading the pipe etc. complete including carriage of materials in all leads and lifts by mechanical or manual means complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 80 | Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately) including carriage of materials in all leads and lifts by mechanical or manual means.complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 81 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation,foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :(i) With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 including carriage of materials in all leads and lifts by mechanical or manual means. complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 82 | Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size )and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design.:(i) Wth common burnt clay F.P.S.(non modular) bricks of class designation 7.5 including carriage of materials in all leads and lifts by mechanical or manual means complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 83 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : (i)Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : (i) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriageof materials in all leads and lifts by mechanical or manual means complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
| 84 | Constructing soak pit 1.20x1.20x1.20 m filled with brick bats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design including carriageof materials in all leads and lifts by mechanical or manual means complete as per HP PWD/CPWD specifications up to entire satisfaction of Engineer Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
