Providing And Fixing Of Open Gym With Base And Play Equipment In Sector 15, 31 And 40 Ward No 19 Zone Ii Gurugram NS Item 2 Brick ballast, well or over burnt broken and screened through a 32mm x 32mm square mesh screen laid consolidated and rammed to a finished thickness of 75mm as above 3 Wave Slide: 9’.5 L x 5’H. Wave slide is of molded Fiberglass Reinforced Plastic (FRP) of 6mm thick and climbing ladder is of G.I pipe jindal make 1” x 12 gauge & G.I rectangular pipe 65 x 25 mm box X 16 gauge as climbing steps which support with 1”.25 sq. pipe x 14 Guage with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site including defect liability period of 2 year free of cost complete in all aspect. 4 Armand Shoulder Wheel:-Providing,andfixingArmandShoulderWheelofsize130X1200X1350mmmakeofGreenGymorEquivalentfabricatedwithmainpostof140mmdiaand3.0mmthickrestoftheG.I pipesare40mmdiaand2.5mmthickall G.I pipesmade up ofhot roiled tubularsteel andhotdippedgalvanized,andpowdercoatedusingAkzoNobelcequivalentof80-120micronthick.Allweldingjointsof G.I pipesareroboticweldedwithjointsscallopedasnecessaryandressedoffremovingsharpedgesandburrs.Zincprimepainttobeappliedat allweldingpointspriortofinish inkPadalsshallbemadeupofNylonalloywithroundededgeofpreventanyimpactofinjuryandseattobemadefrom virginLLDPEmanufacturedbyrotationalmouldingwith minimumthicknessofplastic4.00mm,colourfulandresistantenvironmentalfriendly. Bearingusedshallbemaintenancefree ,dulyoiledsealedandselflubricatedmade byreputedcompany like SKFtobeapprovedbyOfficer-in-Charge Equipmenttobefittedwithinbuiltlimiterstoprevent unwantedmovements.Allopenendsof G.I pipetobecoloured byGI/LLDPEcapsforusersafety.Theequipmenttobe fixedongroundwithconcreteofminimumstrengthM2:ndJshapedweldedboltsandoncetheconcreteisset,ft;heequipmentontoitandcovernutsandboltswiththebaseMatecover,allcompleteasperdirectionandapprovalof-2,engineer-in-Chargeregardingmaterial,shapeofequipmentcolouronmetal,seatandbasecover plateandfixingofequipmentetc. The rates are inclusive of all taxes like GST, Transportation, Installation in CC with 2 years defect liability period free of cost to full satisfaction of engineer in charge complete in all respect. 5 - Twister:- Providing, and fixing Twister of size 1700 X 1300 X 1300 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and ishapod welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Officer -in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of. equipment etc. The rates are inclusive of all taxes like GST, Transportation, Installation in CC to full satisfaction of engineer in charge complete in all respect. 6 Knee HIP Raise:- Providing, and fixing Knee Hip Raise of size 1105 X 550 X 11480 mm make of Green Gym or Equivalent fabricated with main post of 140 rum din and 3.0 mm thick rest or the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Mao Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. PadaIs shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Officer-in-Charge regarding material, shape of equipment, colour on metals_sea and htme pnver plate and fixing of equipment etc. The rates are inclusive of all taxes like GST, Transportation, Installation in CC to full satisfaction of engineer in charge complete in all respect. 7 -Horse Rider and Air Swing- 1.Dimensions (LxWxH) 1500 x 900 x 1100mm.2.Fabricated with main post of NB 100mm (G.I) C Class pipe of approved make.3.Horse Rider main frame of NB 65mm (G.I) C Class pipe Handle support frame of NB 50mm and other pipes of NB 32mm & NB 25mm (G.I) C Class pipe.4.Air Swing leg support frame of NB 50mm (G.I) C Class pipe, Handle support frame of NB 32mm & NB 25mm (G.I)C Class pipe (NB stands for nominal bore i.e. internal diameter of pipe in millimeters).5. All pipes are powder coated with 80-120 micron thick akzo Nobel or equivalent paints.6.All joint of pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges andburrs.7.Zinc primer paints is applied at all the welding points prior to finishing.8. Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness UV resistant and colored.9.Foothold for Horse Rider made of NB 32mm (G.I) C Class Pipe10. Foothold for air swing made of MS Sheet Metal with rounded edge to percent impact and injury. 11. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00mm thickness, coloured,UV resistant and environment friendly.11. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in theequipment manufactured.12. The equipment shall be fitted with inbuilt limiters to prevent unwanted movements.13. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts made of 18mm thickness.14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover.15. High tensile steel with galvanized nut bolts are used for assembly.16. Equipment made to GS mark, EN16630, DIN 79000& ISO 14001 international standard for outdoor fitnessequipment.17.Self-explanatory stainless steel label fixed on equipment for ease of use.The rates are including of all taxes like GST. transportation and installation at site of work to full satisfaction of Engineer incharge. 8 Bridge Ladder: 10’L x 2’W x 6’H. Horizontal ladder is of G.I pipe jindal make 2”, ¾” & vertical ladder is of same material of 12 gauge ISI mark with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site with 2 years defect liability period free of cost to full satisfaction of engineer in charge. 9 Chain Swing (2 seater): 10’L x 5’.5W x 8’.5 H. Horizontal frame & vertical legs is of G.Ipipe of jindal make 2” x 12 gauge. It stays with G.I pipe 1” x 12 gauge. Swinging seats-2 nos is of FRP molded Seat of 2mm thick fitted with m.s pipe ½” frame x 12 gauge which hang with G.I chain 6mm thick duly plated with ball bearing & m.s flat 6mm thick housing with suitable PU Primer & PU Paints. The rates are inclusive of all taxes with 2 years defect liability period free of cost to full satisfaction of engineer in charge. 10 sea saw 4 seater 8 lx5 5 Hw X 15 high frame of ms pipe 2 x 12 guagesittibg planks is of pipes and handleseats 4 nos. molded frp material 11 Double Cross Walker/ Cross trainer double:- Providing, and fixing Double Cross Walker of size 1600 X 600 X 1600 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the G.I pipes are 40 mm dia and 2.5 mm thick all G.I pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of G.I pipes are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company like SKF to be approved by Officer -in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of G.I pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength N425 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. The rates are inclusive of all taxes like GST, Transportation, Installation in CC with 2 years defect liability period free of cost to full satisfaction of engineer in charge complete in all respect.
