|
| 1 | Cleaning 10 user septic tank by opening cover, pumping out sewage water and taking out accumulated night soil, sludge’s, brick bats or any other items, (both Solid and Liquid) and removing to a distance exc 50.00 metre but not exc. 100.00 metre, and buried under ground (minimum 300 mm below ground level), sprinkling bleaching powder on deposited sludge’s at pit including excavation of pits, returning, filling in and dressing of surplus soil/ground to slope as required, again spreading bleaching powder on filled earth and upto 1.00 metre around the trenches/pit not less than 500 grams per square metre, re-fixing the cover after cleaning of septic tank, complete all as specified and as directed. |
| 2 | -Ditto- all as per serial item No. 1 above but 25 users, complete all as specified and as directed. |
| 3 | -Ditto- all as per serial item No. 1 above but 50 users, complete all as specified and as directed. |
| 4 | -Ditto- all as per serial item No. 1 above but 100 users, complete all as specified and as directed. |
| 5 | -Ditto- all as per serial item No. 1 above but 250 users, complete all as specified and as directed. |
| 6 | Cleaning manhole depth not exc. 0.50 metre by opening cover and taking out accumulated brick bats, garbage, silts or any other items, removing and carrying same to a distance exc. 50.00 metre but not exc. 100.00 metre and buried under ground (minimum 300mm below ground level) including excavation of pits and returning, filling in and dressing of surplus soil ground to slope if required, re-fixing the cover after cleaning of manhole, complete all as specified and as directed. |
| 7 | -Ditto- all as per item No. 6 above but depth of manhole exc. 0.50 mtr and not exc. 1.00 mtr, complete all as specified and as directed. |
| 8 | -Ditto- all as per item No. 6 above but depth of manhole exc. 1.0 mtr and not exc. 2.00 mtr, complete all as specified and as directed. |
| 9 | Cleaning gully trap (manhole type) depth not exc. 0.50 metre by opening cover and taking out accumulated night soil, sludges, brick bats or any other Items, removing and carrying same to a distance exc. 50.00 meter and not exc. 100.00 meter and buried under ground (minimum 300mm below Ground Level), re-fixing the Cover after Cleaning of gullytrapsincluding excavation of pits and returning, filling in and dressing of Surplus Soil, Ground to Slope if required, complete all as specified and as directed. |
| 10 | Cleaning 150 mm dia bore sewage line by roding frommanhole, septic tank, gully trap etc with rods , bamboos, rotary cleaner etc. and well flushing with water, complete all as specified and as directed. |
| 11 | Labour only for cleaning of blocked WHB, Kitchen sink, water closet, complete all as specified and as directed. |
| 12 | S&F in repairs 75 mm borePVC (SWR) Soil, Waste and Ventilating Pipe single socket in any length with rubber ring joint fixed to Wall with MS clamps complete all as specified and as directed. |
| 13 | S&F in repairs 110 mm borePVC (SWR) Soil, Waste and Ventilating Pipe single socket in any length with rubber ring joint fixed to Wall with MS clamps complete all as specified and as directed. |
| 14 | S&F in repairs 75 mm bore (dia) PVC (SWR)bends any radius, complete all as specified and as directed. |
| 15 | S&F in repairs 110 mm bore (dia) PVC (SWR)bends any radius, complete all as specified and as directed. |
| 16 | S & F in repairs PVC (SWR) branchpiece 75 mm bore, single (Single Y) equal or unequalfixed to existing pipe, complete all as specified and as directed. |
| 17 | S&Fin repairs 75 mm bore (dia) PVC (SWR)Tee, complete all as specified and as directed. |
| 18 | S&Fin repairs 110 mm bore (dia) PVC (SWR)Tee, complete all as specified and as directed. |
| 19 | S&F in repair 110 mm bore (dia) PVC (SWR) vent cowl, complete all as specified and as directed. |
| 20 | Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed. |
| 21 | M&L for Brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in cm 1:4, complete all as specified and as directed. |
| 22 | M & L for Brick work with subclass‘B’ bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4, complete all as specified and as directed. |
| 23 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above groundlevel) , complete all as specified and as directed. |
| 24 | M&L for Hardcore or gauge not exceeding 63mm of broken stone deposited spread levelled in layers n.exc 15 cm thick watered and rammed to a true surface as in footpath and passage, complete all as specified and as directed. |
| 25 | M&L for 100mm thick PCC 1:2:4 type B2 (using 40mm graded aggregate) as in hard standingSurfaces finishing Even and Smooth without using Extra Cement, complete all as specified and as directed. |
| 26 | M&L for PCC 1:4:8 type D2 (using 40mm graded aggregate) as in foundation, filling & mass concrete, including use and waste of formwork complete all as specified and as directed. |
| 27 | M & L for 75mm thick flooring inPCC1:3:6, type C2 (using 40mm graded stone aggregate) finished even and smooth without using extra cement as in plinth protection, complete all as specified and as directed. |
| 28 | M & L for PCC 1:3:6 type C2 ( using 40 mm graded aggegate) as in surface channel and drain, complete all as specified and as directed. |
| 29 | Taking down cement plaster including racking out joints, hacking for key and scrubbing down with water, complete all as specified and as directed. |
| 30 | M&L for Rendering 15mm thick on Fair Faces of Brick Work or Concrete Surfaces in wallsin Cement Mortar 1:4, mixing with WPC as per manufacturer instructions and finished surfaces even and smooth without using extra cement, complete all as specified and as directed. |
| 31 | Supplyonly integral water proofing compound as per manufacturers instructions complete all as specified and as directed. |
| 32 | M & L for three coat of white washon newly plastered surface of walls including preparation of surfaces, complete all as specified and directed. |
| 33 | Demolition ofRCC works as in (cover slab of manholes, septic tank, kit slab or similar articles) of any description or any position not otherwise specifically provoded for, complete all as specified and as directed. |
| 34 | M & L forRCC 1:2:4 ,type B-1 (using 20mm graded stone aggregate) as in cover slab for manholes,septic tanks,kit slab, pillar, column etc including use and waste of necessary formwork, complete all as specified and directed. |
| 35 | M & L for form work to sides and soffit of kitchen slab, complete all as specified and directed. |
| 36 | S & F Mild steel TMT bar 8 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping forcolumns hooking ends binding with and including mild steel wire notless then 0.9 mmdia or securing with clips quality conforming etc., complete all as specified and directed. |
| 37 | Dismantling floor, hearth or wall tilling including cement mortar bedding (But not backing ) and removingserviceable tiles to store and rubbish off the permises,complete all as specified and as directed. |
| 38 | M&L for Coloured non skid ceramic tiles of size7 to 8 mm thick (Square /Rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 20 mm thick cement screed bedding layer in CM 1:6, complete all as specified and as directed. |
| 39 | M & L for Coloured glazed ceramic tiles of size 450X350X7mm set and jointed in neat cement slurry and pointed in white or coloured cement to match in vertical surface such as Skirting, Dado etc. including rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces , complete all as specified and as directed. |
| 40 | M&Lfor Factory made coloured glossy finished rubber moulded chequered tiles 300 x 300 x 25mm thick as in floors, set and jointed in neat cement slurry and grey cement and pigment over and including screed bed of 20mm thick in CM (1:6) as in path, complete all as specified and as directed. |
| 41 | M & L for 80mm thick M-40 coloured glossy finished rubber moulded interlocking tiles/ blocks any shape and size laid over stone dust 20 mm thick, jointed & pointed in neat cement slurry with pigment to match theshade of tile etc,complete all as specified and as directed |
| 42 | M & L for Sand filling under floors or in foundations including watering and consolidation,complete all as specified and as directed. |
| 43 | Excavation in trenches in soft/loose soil not exc 1.5 mtr wide and 1.5 mtr in depth for foundation etc as in drains, manholes not exc 10 Sqm on plan and nexc1.5 min depth and getting out, complete all as specified and as directed. |
| 44 | Returning filling in including spreading levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified and as directed. |
| 45 | Removing excavated material not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point in soils, complete all as specified and as directed. |
| 46 | S & F in repair Vitreous China Squatting Pan ‘ORISSA’ Pattern of size 580X440 mm White, with \"P\" or \"S\" Trap integral Foot rest, providing Joints between Flush Pipe and Socket of WC Pan (excluding Flushing Cistern and Flush Pipe), fixing with and including provision of 150mm thick Lime concrete bedding, complete all as specified and as approved.Make : Cat part No :C0117 of make Parryware or equivalent of Kohler, Cera, Hindware as approved by GE |
| 47 | S & F Vitreous China Wash Down Water Closet Pan (Pedestal Pattern) White including fixing Bolts (excluding Flushing Cistern and Flushing Pipe) with Plastic Water Closet Seat, Black, Closed Pattern with Recessed Bottom and over including Mild steel chromium plated aluminium hanging device and including taking out unserviceable WC and making good disturbed surfaces with cement mortar 1:3, complete all as specified and as approved.Make Cat part No :C0278 of make Parryware or equivalent of Kohler, Cera, Hindware as approved by GE. |
| 48 | S & F in repair 10 litres capacity PVC low level syphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and flushing pipe, complete all as specified and as directed. |
| 49 | S & F in repair brass chromium plated health faucent hand spray, with hook and 1.5 Mtr long CP flexible connection pipe, complete all as specified and as directed. |
| 50 | S & F Vitreous China Wash Hand Basin size 550 x 400mm (flat back or angle back type) white with 32mm dia brass chromium plated waste fitting, galvanised iron \"Light Grade\" 32 mm bore waste pipe, a pair of cast iron brackets duly painted / erecting stand including cutting and pinning in ends, making good distrurbed surfaces in cement mortar 1:3 inlcuding taking down unservicable wash hand basin and connected items, complete all as specified and as approved. |
| 51 | S & F in repair PVC connection 15mm size with PTMT Nuts of length 450mm and fixed in repairs, complete all as specified and as directed. |
| 52 | S&F in repairsKITCHEN SINK WITH DRAINAGE BOARDmade ofstainless steel 1mm thick overall size915mm x 460 mm and bowl size410 mm x 330mm x 160 mm,with plugs, washersand wastes, includingbeddingin cement mortarto dwarfwall or includingfixing cantilever brackets and connecting unionto pipecomplete all as specified and directed. |
| 53 | S & F Galvanised iron water tubing 15 mm bore (dia), Medium Grade with all fittings and fixed to walls or ceilings or laid in floors, complete all as specified and as directed. |
| 54 | S & F in repairs forPVC15mm dia Bib cock of PTMT White colour screwed down high pressure with crutch or butter fly handle screwed both and iron pipe or for unions and fixed, complete all as specified and as directed. |
| 55 | S & F in repair Pillar taps 15mm bore, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed Shanks and Fly-Nuts, screwed for Iron Pipe, complete all as specified and as directed. |
| 56 | S & F in repair Bib taps 15mm Bore, chromium plated cast copper alloy, with crutch or butterfly screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed. |
| 57 | S & F in repair 15 mm bore stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed. |
| 58 | Excavating in post holes in soft/loose soil n.exc. 0.5 cum and getting out returning, filling in and ramming in layers n.exc. 25 cm, watering and removing surplus soil to a distance n.exc. 50 mtr and making good the surface, complete all as specified and as directed. |
| 59 | S&F in repairs Galvanised,2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing’s and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and as directed (each line wire to be measured). |
| 60 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as per specified and as directed. |
| 61 | Dismantling fencing wiremesh any type, complete all as specified and as directed. |
| 62 | S & F MS angle iron in fencing posts & struts including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets ( for securing wire mesh etc) including all necessary, drilling, bolting or riveting etc and similar work conforming to Fe-410-0 or Fe-310-0, complete all as specified and as directed. |
| 63 | S&F Framed work Fe-410-W (Gde-E-250 quality-A) as in doors or gates of angle or other section with gusset plates, rails, braces. etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixingcomplete all as specified and directed. |
| 64 | S & F 1.60mm thick mild steel plain black sheetin hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and unnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required and complete all as specified and directed. |
| 65 | S & F MS Flat iron 40 x 6mm as in fillets for securing wire mesh including all necessary drilling, bolting or riveting etc and similar work confirming to \"Fe 410-W (Gde E-250) quality A, complete all as specified and as directed. |
| 66 | S&F Mild steel screw bolts 5 to 10mm dia of shank with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt, exc 5 cm but n exc 10 cm long complete all as specified and directed. |
| 67 | Fixing only chain link fencing including line wires, any mesh size and type to any type of standards rails, straining bolts etc including provision and binding wire, complete all as specified and directed. |
| 68 | Supply only chain link mild steel (galvanised) fencing 50mm X 50mm mesh size and 4 mm dia of wire, complete all as specified and directed. |
| 69 | M&L for Preparation of new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed. |
| 70 | S&F in repairs CONSEC-ZAL super Razor punched barb tape(SRPBT) aluminium base helix coil with and including necessary fixing clips for securing complete all as directed with the following specifications:-(i) Diameter of concentring coil(unscratched) :1000mm (ii) numbers of turns of concentring: 51 turns per coil(iii) weight of each coil with hessian pack-14.50 kg(+ 0.7)(iv) coverage per coil - 8 RM (V) CENTRAL core wire:-Made from 2.50mm dia high tensile spring steel (HTSS) wire confirming to IS-4454 duly hot dipped galvanized(confirming to IS 2629)(vi) Razor punched strip:- Razor punched tape is CONSEC-ZAL steel comprising of aluminium base with zinc alloy@ 150 gm/sqm confirming to ASTMA-792/A-792 Mwith additional primer treatment with epoxy/polyurethane & final point top coat of Caulfield green shade (BSL139) by hot dipping process.(Note:- Running length of the wall shall be measured for payment purpose)Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule \"A\"/BOQ. |
