|
| 1 | B/R work |
| 2 | Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft and loose soilcomplete all as specified and as directed. |
| 3 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft and loose soil complete all as specified and directed. |
| 4 | ditto item no. 3.00 butfor each additional 1.5m or part thereof in depth beyond the first 1.5m |
| 5 | Excavating over areas, n exc 1.5 m deep and getting out of soft and loose soill complete all as specified and as directed. |
| 6 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soft and loose soils complete all as specified and as directed. |
| 7 | Removing excavated material (soil) not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 8 | Material and labour for loose filling with broken brick bats of gauge 80 to 150mm in soakage pit complete all as specified and directed |
| 9 | M & L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 10 | M&L for Hardcore of broken stone or boulder ofgauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 11 | M & L for PCC M-7.5 grade, (Nominal mix) (using 40mm graded stone aggregate), as in foundation, filling and mass concrete complete all as specified and as directed. |
| 12 | M&L forPCC M-10 grade (Nominal Mix)using 40mm graded crushed stone aggregate as in surface channel and drains complete all as specified and directed. |
| 13 | M&L for cement concrete M-15 grade(Nominal Mix) type B1 using 20mm graded crushed stone aggregate as in copping complete all as specified and directed. |
| 14 | M&L forRCC (1:2:4 ), nominal mix type B-1using 20mm graded crushed stone aggregate asin foundations, footings, foundation beams; plinth beams; bases for columns, etc.and mass concrete complete all as specified ad directed. |
| 15 | M&L for RCC M-15 (nominal mix) using 20 mm graded crushed stone aggregate as in beams, lintels and the like over 1.5m span complete all as specified and directed. |
| 16 | M&L for RCC M-15 (Nominal mix) using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 17 | M & L for precast cement concrete M15 grade (nominal mix) using 20mm graded stone aggegate set in cement mortar(1:4) in landing, cover slabs (for manholes etc) Chajjas, shelves and simillar articles with plain faces.complete all as specified and directed. |
| 18 | M&L for 100mm thick PCC M7.5 grade (Nominal mix) using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed. |
| 19 | M&L 25mm thick plain cement concrete M15 grade (Nominal mix) using 20mm graded crushed stone aggregateasin floor, finishes even and fair to receive floor tiles complete all as specified and directed. |
| 20 | M&L for 75mm thick PCC M10 grade (Nominal mix) using 20mm graded crushed stone aggregate as in sub base complete all as specified and directed. |
| 21 | M&L 100mm thick PCC M-15 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in floor finishes even and smooth complete all as specified and directed. |
| 22 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed. |
| 23 | Add or deduct for each 25 mm girth or part thereof over or under 30cm against Item No 22.0 above and ditto (For adjustment only) |
| 24 | Supply of Integral water proofing Compound ISI marked. |
| 25 | Supply only liquid water proofing compound. (Make: Sika/Dr Fixit/Imperno) |
| 26 | M&L for 75mm thick PCC M-10 grade(Nominal mix) using 40mm graded stone aggregate as in plinth protection finishing surfaces even andsmooth without using extra cement complete all as specified and directed. |
| 27 | M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed. |
| 28 | M & L for brick work with sub class ‘B’ brick, old size (locally available best quality) straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed. |
| 29 | M & L for brick work with sub class ‘B’ brick with sewer brick straight or curved on plan exc 6 m mean radius, built in cement mortar( 1:3) complete all as specified and directed. |
| 30 | Material and labour for brick work with sub class “B’ bricks in one brick thick in honey comb walling in cement mortar (1:4) complete all as specified and directed. |
| 31 | Cutting chases, pinning in, making good to facings of brick walls where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed water conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 32 | Cutting holes in brick walls, built in CM for inserting hold fasts and making good dismantled portion in CM 1:3 OR cement concrete 1:2:4 type B1 depth of embedded portion of hold fasts or lugs measured from the face of the jambs into the wall exc half brick but not exc one brickcomplete all as specified and directed. |
| 33 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick thickness below or above ground level complete all as specified and directed. |
| 34 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as directed. |
| 35 | M & L Walling of random rubble,uncoursed, well bonded, beddedand solidly hearted, built in cement mortar complete (1:4) all as specified and directed. |
| 36 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished surface of concrete complete all as specified and directed. |
| 37 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n exc 200mm thick (horizontal or sloping) rough finished surface of concrete complete all as specified and directed. |
| 38 | S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 39 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 40 | S&F 2nd class Hard Wood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 41 | S&F figured glass 3mm thick, pin headed typeand glazing with oil putty and glazing clips in metal frame or second class hard wood beading to wooden frame in squarenot exc 0.5 sqm in each pane complete all as specified and as directed. |
| 42 | S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed. |
| 43 | S&F 150mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed. |
| 44 | S&F 150mm long alumiunium handles cast type anodised complete all as specified and directed. |
| 45 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width or aperture 1.18mm complete all as specified and directed. |
| 46 | M & L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 47 | M&L for TMT bars 8mm dia and over upto 10mm cut to length, bent to shape as required including cranking, bending and binding with mild steel wire (annealed) not less than 0.9mm dia as in stirrups, spacers and binders complete all as specified and directed |
| 48 | M&L for MS work as in framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 49 | M&L welded steel wire farbic not exc 4 kg per sqr mtr supplied and fixed complete to wood or steel members complete all as specified and directed. |
| 50 | S&F 1.25mm Plain, black mild steel sheeting in stepped flashing (measured as the mininum ractangle from which the pieces can be cut) including welded and soldered joints are providedcomplete all as specified and directed. |
| 51 | Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240. complete all as specified and directed. |
| 52 | S&F Rolled section as in main and cross beams, hips and Jack rafters, purlins where connected to common rafters and running rails and guides for sliding door, fixed with angle cleats or other connecting plates including required accessories confirming to Fe-410-W Gde E-250 quality A. complete all as specified and directed. |
| 53 | S & F Pre painted galvalume aluminium zinc coating GI Based semi corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws. complete all as specified and directed. |
| 54 | S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 25 x25 x0.35mm and main/cross tee of size 24 x38 x0.70mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Boardincluding fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed. |
| 55 | M & L for rendering 20mm thick plaster in cement mortar (1:4)onother than fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand) |
| 56 | M & L for rendering 15mm thick plaster in cement mortar (1:6)on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand) |
| 57 | M & L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles etc complete all as specified and directed. |
| 58 | Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc complete all as directed. |
| 59 | M&L for rendering 15mm thick on fair faces of brick work in cement mortar (1:3) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified & directed.(Using Dimapur Sand)[Note: WPC will be measured and paid separately) |
| 60 | M&L for preparation of new plastered surfaces and applying three coats of white wash on wall complete all as specified and directed. |
| 61 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of whitewash complete all as specified and directed. |
| 62 | M&L forfor preparation of new plastered surfaces of wallsand applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 63 | M&L forprepraration of new or untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applyingtwo coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 64 | M&L forprepraration of new or untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applyingone coat of red oxide primer complete all as specified and directed. |
| 65 | M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed. |
| 66 | M&L colourednon-skid joint free ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor, setand jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 67 | S&F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backingin CM (1:3) complete all as specified and directed. |
| 68 | S&FPVC low level flushing cistern white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe 600mm long 15mm bore with brass heads and washerscomplete all as specified and directed. |
| 69 | S&F vitreous china squatting pan “Orissa pattern of size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including lime concrete bedding complete all as specified and directed. |
| 70 | S & F vitreous china wash down water closet pan (pedestal pattern) white with integral foot rest with ‘P’ or ‘S’ trap (excluding flushing cistern and flush pipe) including all fitting with seat cover completeall as specified and as directed. |
| 71 | S & F vitreous China wash basin, white, flat back, size 630x450mm including brackets, waste fittings, waste coupling, 32mm dia, waste pipe, complete all as specified and directed. |
| 72 | Supply and fix 600mmx450mm beveled edge mirror of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 73 | S&Fbrass chromium plated, 600mm long between flanges tubular towel rail , 20mm dia, D type. fixed with and including chromium plated brass screws and wooden plastic cleats,complete all as specified and directed. |
| 74 | S&F soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed. |
| 75 | S&FPVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 76 | S&F 75mm dia PVC (SWR) floor trap, plain with grating including setting and jointing with solvent cement completeall as specified and directed. |
| 77 | S&Fangle valve 15 mm dia cast copper alloy, chromium plated, fancy type,screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and directed. |
| 78 | S & F 15mm bore bib taps, cast copper alloy, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferule complete all as specified and directed. |
| 79 | S&F 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks for iron pipes and fixed complete all as specified and directed. |
| 80 | S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 81 | S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 82 | S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in rain water pipe complete all as specified and directed. |
| 83 | M&LPVC SWR pipe dia 110mm single socketed in any legnth with rubber ring joints, laid in trenches or floors complete all as specified and directed. |
| 84 | S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wallcomplete all as specified and directed. |
| 85 | S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 86 | S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 87 | S&F 110mm borePVC (SWR) bends with access door complete all as specified and directed. |
| 88 | S&F 75mm borePVC (SWR) bends with access door complete all as specified and directed. |
| 89 | S&F 110mm borePVC (SWR) bends complete all as specified and directed. |
| 90 | S&F 75mm borePVC (SWR) bends complete all as specified and directed. |
| 91 | S&F 75mm bore PVC (SWR) vent cowlcomplete all as specified and directed. |
| 92 | M & L for concrete bed to drain pipes 100mm including packing under ,and haunching against the sides of pipes after they are laid and tested in cement concrete( 1:3:6) type C2 complete all as specified and directed. |
| 93 | S&F inGun-metal (ISI marked), globe or gate valves, with iron wheel head, screwed both ends for iron pipe15mm bore and fixed complete all as specified and directed. |
| 94 | S&F inGun-metal (ISI marked), globe or gate valves, with iron wheel head, screwed both ends for iron pipe20mm bore and fixed complete all as specified and directed. |
| 95 | S&F rotational moulded polyethylene water storage tank 1000 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections & brass ball valve complete all as specified in SSR Part-I and as directed. |
| 96 | S & F ball brass valves, high pressure, with polythene float and flynutcomplete, screwed for ironpipe or brassferrule and fixed complete all as specified and directed. |
| 97 | Supply only CP health faucet (ABS Body) with 1.2m long PVC tube & wall hook (Make : Jaquar Continental Cat No. ALD-IVY-583 or equivalent in Cohler/ Cera/Parryware/Marc |
| 98 | M & L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and pigmentcomplete all as specified and directed. |
| 99 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade \"A\" complete all as specified and directed |
| 100 | E/M work |
| 101 | Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc includingmulti-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc completeall as specified and directed for following :- (Colour code to be followed) |
| 102 | (a)One light/fan point controlled by one, one way switch |
| 103 | S&Fmodular switch piano, 6 Amps, single pole, one way complete all as specified and directed. |
| 104 | S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 105 | S&F blank spacer plate for single module. |
| 106 | S&F modular white cover with frame for fixing of 8 module. |
| 107 | S&F modular white cover with frame for fixing of 2 module. |
| 108 | S&F modular white cover with frame for fixing of 1 module. |
| 109 | S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.(Make: Havells cat part No. DHDPSHODRW 08 or as per list approved makes enclosed hereinafter) |
| 110 | S&F MCB single pole and neutral 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed. (Make Havells Cat No: DHMGCSNF032or equivalent in Legrand/ HPL/Indo Asian). |
| 111 | S&F MCB single pole6 to 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed. (Make Havells Cat No: DHMGCSPF032or equivalent in Legrand/ HPL/Indo Asian). |
| 112 | S&F PVC Board 30 x 25 x 5 Cm depth medium quality ISI marked complete all as directed. (Make: PRESTO PLAST / PRESTO TEAK / MODI / PLAZA) |
| 113 | S&F LED tube light fittings 1200mm(20 w, approx 1800 lumen output)basic all purpose surface & wall mounted LED batten with polycarbonate housing & integrated electronic driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. (Make: Havells Lumiline Cat No.LUMILINEBS20WLED865SPCWH or equivalent in Philips/ Bajaj/ Crompton) |
| 114 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 sq. mm 2 core nominal cross section in service connections complete all as specified and directed. |
| 115 | S&F metal exhaust fan AC single phase 230 volts of size 300mm sweep with louvre complete fixed and opening of wall with suitable MS bolts, grouted to wall and connecting up including provision of cable from connector to fan with flexible cable 24/0.2mm with copper conductor and necessary fitting complete all as specified and directed. (Make: Crompton Model No Drift Air 12\" or equivalent in Havells/Bajaj) |
| 116 | Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed. (Note: Earth strip beyond 7.5 m length will be measured & paid separately) |
