Military Engineer Services-MES has published Repair / Replacement Of Unserviceable Point Wiring Fitting / Fixtures Led Inverter Lights Db And Unserviceable Earthing At Zone-A Various Single Living And Married Accn And Wards Under Ge ( E / M ) Base Hospital Delhi Cantt-10. Submission Date for this Tender is 12-02-2022. Electrification Work Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendent, regulator socket etc shall be measured and paid separately) and making good disturbed surfaces of wall floor etc complete all as specified and as directed. |
| 2 | M&L point wiring for modular switches with1.5 Sqmm, PVC insulated, unsheathed, multistranded,copper conductor Cable, FRLS, 1100 Volt grade, drawn throughand including concealed, rigid non-metallic PVC Conduit of minimum 25mm dia orasper site requirement with all fittings, including cadmium plated screws as per IS, including 1.5 Sqmm size, PVC insulated, unsheathed, copper earth continuity conductor, connected to earth dolly, suitable for One light/fan/bellpoint controlled by one No, 5 Amp, one way switch/ bell push including cutting chasing & making good the disturb surface to match with the existing surface completeall as specified and as directed. |
| 3 | All as per item No. 2.00 here-in-before but for one three pin, 5 Amp, socket out let on independent board complete all as specified and as directed. |
| 4 | All as per item No. 2.00 here-in-before but for one three pin, 5 Amp, socket out let on same board complete all as specified and as directed. |
| 5 | All as per item No. 2.00 here-in-before but for one lightpoint controlled by two Nos, two way switches completeall as specified and as directed. |
| 6 | All as per item No. 2.00 here-in-before but point wiring with 2.5 Sqmm,multistranded, copper conductor cable, for 15 Amps socket outlet on independent board with 2.5 Sqmm size earth conductor completeall as specified and as directed. |
| 7 | All as per item No. 2.00 here-in-before but point wiring with 4 Sqmm,multistranded, copper conductor cable, for AC point on independent board with 4 Sqmm size earth conductor completeall as specified and as directed. |
| 8 | M&L point wiring for normal switches with 1.5 sqmm, single core, multi stranded copper conductor PVC insulated and unsheathed (FRLS) cable 1100 Volts grade, drawn through existingconcealed Conduit as requirement of siteincluding cadmium plated screws as per ISI, including replacement of 3 mm thick phenolic laminated sheet top covers on and includingsunk type CI/ steel terminal boxes concealed in wall including 1.5 Sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly for One light/ fan/ bellpoint controlled by one No, 5 Amp, one way switch/bell push completeall as specified and as directed.Make- Havells/Finolex/Standard. |
| 9 | All as per item No. 8.00 here-in-before but for one three pin, 5 Amp, socket out let on independent board completeall as specified and as directed. |
| 10 | All as per item No. 8.00 here-in-before but for one three pin, 5 Amp, socket out let on same board completeall as specified and as directed. |
| 11 | All as per item No. 8.00 here-in-before but point wiring with 2.5 Sqmm,multistranded, copper conductor cable, for 15 Amps socket outlet on independent board with 2.5 Sqmm size earth conductor completeall as specified and as directed. |
| 12 | All as per item No. 8.00 here-in-before but point wiring with 4 Sqmm,multistranded, copper conductor cable, for AC point on independent board with 4 Sqmm size earth conductor completeall as specified and as directed. |
| 13 | S&F in replacement modular cover plate with frame, 1 or 2 module completeall as specified and as directed. |
| 14 | S&F in replacement modular cover plate with frame, 3 modules completeall as specified and as directed. |
| 15 | S&F in replacement modular cover plate with frame, 4 modules completeall as specified and as directed. |
| 16 | S&F in replacement modular cover plate with frame, 6 modules completeall as specified and as directed. |
| 17 | S&F in replacement modular cover plate with frame, 8 modules completeall as specified and as directed. |
| 18 | S&F in replacement modular cover plate with frame, 12 modules completeall as specified and as directed. |
| 19 | S&F in replacement modular cover plate with frame, 16 modules completeall as specified and as directed. |
| 20 | S&F in replacement modular metal flush box, 1 or 2 modules completeall as specified and as directed. |
| 21 | S&F in replacement modular metal flush box, 3 modules completeall as specified and as directed. |
| 22 | S&F in replacement modular metal flush box, 4 modules completeall as specified and as directed. |
| 23 | S&F in replacement modular metal flush box, 6 modules completeall as specified and as directed. |
| 24 | S&F in replacement modular metal flush box, 8 modules completeall as specified and as directed. |
| 25 | S&F in replacement module metal flush box, 12 modules completeall as specified and as directed. |
| 26 | S&F in replacement module metal flush box, 16 modules completeall as specified and as directed. |
| 27 | S&F in replacement modular switch, 1 way, 6 Amp, 1 Module, completeall as specified and as directed. |
| 28 | S&F in replacement modular switch, 2 way, 6 Amp, 1 Module, completeall as specified and as directed. |
| 29 | S&F in replacement modular bell push, 6 Amp, 1 Module complete all as specified and as directed. |
| 30 | S&F in replacement modular Socket, 6 Amp, 2/3 Pin, combined, 2 modulecompleteall as specified and as directed. |
| 31 | S&F in replacement modular switch, 1 way, 16 Amp, 1 Module, completeall as specified and as directed. |
| 32 | S&F in replacement modular Socket, 16/6 Amp, 3/5 Pin, combined, 2 modulecompleteall as specified and as directed. |
| 33 | S&F in replacement modular Fan step regulator, 120W - 1 module completeall as specified and as directed. |
| 34 | S&F in replacement Plug Top, 5 Amps, 230 Volts, white, polycarbonate body, 3 pin type, including connectingcompleteall as specified and as directed. |
| 35 | S&F in replacement Plug Top, 15 Amps, 230 Volts, white, polycarbonate body, 3 pin type, including connectingcompleteall as specified and as directed. |
| 36 | S&F in replacement Lamp holder, white, Polycarbonate body, with back plate, suitable for batten fittings, fixed in position & connecting completeall as specified and as directed. |
| 37 | S&F in replacement Ceiling rose, PVC/ polycarbonate, isolated body type, three terminal, 240 volt,fixed in position & connecting completeall as specified and as directed. |
| 38 | S&F in replacement Bell ding dong, AC, 230 Volts, fixed in position & connecting completeall as specified and as directed. |
| 39 | S&F in replacement ultra slim, electronic type, ballast suitable 1 x 36 / 40 watts fluorescent tube light fitting & connectingall as specified and as directed. |
| 40 | S&F in replacement LED Driver 36/39 watt , 240 volt , 50 Hz for 2x2 LEDlight fitting & connectingcomplete all as specified and as directed. |
| 41 | S&F in replacement Switch Piano type, white polycarbonate body, single pole, one way 5 amp, 230 V, including connectingcomplete all as specified and as directed. |
| 42 | S&F in replacement Switch Piano type, white polycarbonate body, single pole, one way 15 amp, 230 V, including connecting complete all as specified and as directed. |
| 43 | S&F in replacement Socket outlet 2 in 1, 3 pin, 5 and 15A - 230 V, Multipurpose flush type, including connecting complete all as specified and as directed. |
| 44 | S&F in replacement Socket outlet 2 in 1, 3 pin, 5A, 230 Vincluding connecting complete all as specified and as directed. |
| 45 | S&F in replacemen stepped type electronic fan regulator, white polycarbonate body, flush type, 230 V, including connecting complete all as specified and as directed. |
| 46 | S&F in replacement sub main wiring with 2 runs of4 Sqmm, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 20 mm dia, concealed,PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 4 Sqmm size PVC insulated copper conductor including cutting chasing and making good the disturb surface to match with existing surfacecomplete all as specified and as directed. Note:- Two run of cable along with earth conductor including PVC rigid conduitshall be measured as one RM length). |
| 47 | S&F in replacement sub main wiring with 2 runs of6 Sqmm, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 25 mm dia, concealed,PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 6 Sqmm size PVC insulated copper conductor complete all as specified and as directed. Note:- Two run of cable along with earth conductor including PVC rigid conduitshall be measured as one RM length). |
| 48 | S&F in replacement sub main wiring with 4 runs of10 Sqmm, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 32 mm dia, concealed,PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 10 Sqmm size PVC insulated copper conductor complete all as specified and as directed. Note:- Four run of cable along with earth conductor including PVC rigid conduitshall be measured as one RM length). |
| 49 | S&F in repair load line, distribution board, double door type, TPN, vertical, 4 way,suitable for accomodating upto 125 Amps MCCB with incomming frame three pole, including 250 Amp copper bus bar, neutral link, blanking plates etc complete all as specified and as directed.Make : Legrand Model: 5077 45 or equivalent model of Make mentioned in PS. |
| 50 | S&F in repair load line, distribution board, double door type, TPN, vertical, 8 way,suitable for accomodating upto 125 Amps MCCB with incomming frame three pole, including 250 Amp copper bus bar, neutral link, blanking plates etc complete all as specified and as directed.Make : Legrand Model: 5077 47 or equivalent model of Make mentioned in PS. |
| 51 | S&F in repair load line, distribution board, double door type, TPN, vertical, 12 way,suitable for accomodating upto 125 Amps MCCB with incomming frame three pole, including 250 Amp copper bus bar, neutral link, blanking plates etc complete all as specified and as directed.Make : Legrand Model: 5077 48 or equivalent model of Make mentioned in PS. |
| 52 | S & F in repair for distribution board double door type, SPN, 12 way,completeincluding 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed. |
| 53 | S & F in repair for distribution board double door type, SPN, 4way,completeincluding 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed. |
| 54 | S & F in repair for distribution board double door type, SPN, 8 way,completeincluding 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed. |
| 55 | S & F in replacement recessed Type, Full window, opal Diffuser, Ultra modern, slim LED Panel 2x2, 36W, size 595X595mm (Nominal), suitable for Existing false ceiling, with CRCA powder coated White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection minimum 3KV, safety & performance test as per IS:15885 Part 2/Sec, Total system Lumen not less than 4200, in Cool day Light (5700K), Power factor>0.95, CRI (Ra) >80 with Average life of 50000 Burning hours, complete with all accessories as required complete all as specified and as directed.Make : Havells Model No :- STRATO 2X2PLR36WLED857MOD with LED Drivar Model No LEDDRIVER36V36WS or equivalent model of Make mentioned in PS. |
| 56 | S & F in replacement of Surface/Wall Mounted 9W integrated LED 2 feet Fitting with Epoxy powder coated white polycarbonate channel housing. Total system Lumen of 9W Led should be 800 or above in Cool day Light(6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy>100 Lm/w, THD(%) < 20, Complete with all accessories as required with connections.Make -Havells cat part No -LUMILINEBS9WLED865SPCWH/ or equivalent model of make mention in PS. |
| 57 | Supply, fixing and connecting in replacementof Surface/Wall Mounted integrated LED 4 feet Fitting of not more than 20w with polycorbonate housing & opal diffuser finish , Integral electronic driver with Output short circuit protection, Surge Voltage Protection of min 3 KV and Safety test as per IS15885 Part 2/ Sec 13. Total system Lumen not less than 2000 or above in Cool day Light(6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy100 Lm/w, THD(%) < 20, LED with Average life of 50000 Burning hours. Complete with all accessories as required with connections.Make -Havells cat part No-LUMILINEBS20W LED865SPCWH or equivalent model of make mention in PS. |
| 58 | S&F in repair Bldgsecurity light fitting LED 45 Watt cast aluminium housing, toughened glass,silicon gaskect, high power LED with lens for uniform istribution pre-wired and electric connection with suitable size of stranded copper flexible PVC insulated wire including GI bracket 1.5 Mtr with clamps and bolts complete all as specified and directed.Make - Havells Cat Part No- ENDURAPERLNEOSL45WLED757PASYTOPCor equivalent model of make mention in PS. |
| 59 | M&L Earthing complete with galvanised Iron earth plate eletrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25mtrdeep below GL) with top edge of the plate not less than 1.5 metre below normal grond level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all round the plate with using 4mm dia GI wire as earth wire electrode welded and revetted to earth plate at one end connected to main DBs of Building at another end GI earth wire encased in and including 15mmbore GI light grade pipe through upper end of earth plate upto main DB of bldg, with 20mm bore GI pipe light grade as water pipe from earth chamber to upperedge of earth plate, MS funnel with wire mesh fixed on water pipe including execvation earth work, Provn ofPCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type BI duly reinforeced with MS bars 8mm dia @ 150 mm centre to centre, both ways complete with lifting handle all as shown in electrical plate No 3 of SSR of part-I complete all as specified and as directed. |
| 60 | Taking down ceiling fan, exhaust fan including connection cable, dismantling blades and refixing & reconnecting the same after necessary repair/rewinding/painting etc complete all as specified and as directed.Note:Servicing/ Rewinding/ Painting of Fan shall be measured andpaid seprately under respective item of this Schedule. |
| 61 | M & L for painting of ceiling fans/ exhaust fan complete, with syntetic enamel paint as per existing color by one coat spray painting including filling cavities with filler, includingcleaning all dust complete all as specified and as directed. |
| 62 | M&L for servicing of ceiling fans/exhaust fan/wall fan /padestal fan of any Make and sizes, carrying out minor repair such as greasing, oiling, fitting, testing complete all as specified and as directed. |
| 63 | M&L rewindingceiling fan of any make and model, 1200 /1400 mm sweep, with super enamelled copper wire of required size, duly varnishing with high quality Varnish, including greasing & servicing and testing including taking down old winding wire complete all as specified and as directed. |
| 64 | All as per item No. 63.00 here in before but rewinding Exhaust fan of size 200mm to 300mm complete all as specified and as directed. |
| 65 | All as per item No. 63.00 here in before but rewinding Exhaust fan of size 380mmcomplete all as specified and as directed. |
| 66 | All as per item No. 63.00 here in before but rewinding Exhaust fan of size 450 mmcomplete all as specified and as directed. |
| 67 | S&F in replacement bearing No 6200/6201/6203/6204 suitable for Ceiling fans/Exhaust fan of existing make and size, for proper running including testing complete all asall as specified and as directed.(Note:Testing shall be done in MES store yard at contractor"s expense). |
| 68 | S&F in replacementbush suitable for Ceiling fans/Exhaust fan/padestal fan/wall fan of existing make and size, for proper running including testing complete all asall as specified and as directed.(Note:Testing shall be done in MES store yard at contractor"s expense). |
| 69 | S&F in replacement capacitor 2.5 Mfd complete all asall as specified and as directed. |
| 70 | S&F in replacement capacitor 3.15 Mfd complete all asall as specified and as directed. |
| 71 | S&F in replacement capacitor 4.0 to 8.00 Mfd complete all asall as specified and as directed. |
| 72 | S&F in repair switch socket combination, 5/15 Amp, multipurpose, with PVC gang box complete all as specified and as directed. |
| 73 | S&F in repair switch socket combination, 5 Amp, multipurpose, with PVC gang box complete all as specified and as directed. |
| 74 | S&F in repair Fan rod, 2/3 feet long, made out of 20 mm bore GI pipe,with necessary clamps & nut boltand other accessories complete all as specified and as directed. |
| 75 | S&F in repair PVC casing caping, medium grade, size 25 X 16 mm, including necessory accessories (Tee, elbow etc) & clamp, screw, rowel plug etc. complete all as specified and as directed. |
| 76 | S&F in repair PVC casing caping, medium grade, size 32 X 16 mm, including necessory accessories (Tee, elbow etc) & clamp, screw, rowel plug etc. complete all as specified and as directed. |
| 77 | S&F in repair Rigid, non-metallic, PVC conduit, medium grade, 20mm bore, including all fittings such as tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and as directed. |
| 78 | All as per item No 77 here in before but 25 mm bore complete all as specified and as directed. |
| 79 | S&F in repair modular blanking plate, 1 Module complete all as specified and as directed. |
| 80 | S&F in repair white colour, prelaminated sheet (Hylam Sheet), 8x5 inch size, 3 mm thick complete all as specified and as directed. |
| 81 | S&F in repair white colour, prelaminated sheet (Hylam Sheet), 5x5 inch size, 3 mm thick complete all as specified and as directed. |
| 82 | S&F in repair PVC Gang box, 3x3 inch, for switch socket combination 5A complete all as specified and as directed. |
| 83 | Cutting chases, pinning in, including making good in cement mortar 1:3 including painting to match with the existing surface as in edges of landings, steps, cills, sunshades, shelves, lintels, etc; and for concealed conduit wiring, etc, cutting not exc 10 cm girth complete all as specified and as directed. |
| 84 | S&F sheet metal enclosure with socket plug top, single pole and neutral enclosure with a two pin earth plug and socket complete with one MCB of capacity 20 Amps , 240 Volts complete all as specified and directed. Make:- Legrand/ Seimens/ Schneider. |
| 85 | S & F in repair MCCB 415 V, 125 Amps, 25 KA, 4 Pole complete all as specified and directed. |
| 86 | S & F in repair MCCB 415 V, 100 Amps, 35 KA, 4 Pole complete all as specified and directed. |
| 87 | S & F in repair MCB TPN, 415 Volts, 63 Amps complete all as specified and directed. |
| 88 | S & F in repair MCB TP, 415 Volts, 40 Amps complete all as specified and directed. |
| 89 | S & F in repair MCB DP, 240 Volts, 40 Amps complete all as specified and directed. |
| 90 | S & F in repair MCB DP, 240 Volts, 63 Amps complete all as specified and directed. |
| 91 | S & F in repair MCB SP, 240 Volts, 6 Amps complete all as specified and directed. |
| 92 | S & F in repair MCB SP, 240 Volts, 16 Amps complete all as specified and directed. |
| 93 | S & F in repair MCB SP, 240 Volts, 32Amps complete all as specified and directed. |
| 94 | S & F in repair MCB SP, 240 Volts, 63 Amps complete all as specified and directed. |
| 95 | S & F in replacementInverter LED light batten with opal diffuser, IP20 4 Hrs Backup, 20/22 W, 4 feet long complete all as specified and directed. |
| 96 | S & F in replacement in replacement Inverter LED light batten with opal diffuser, IP20 4 Hrs Backup,10/12 W, 2 feet long complete all as specified and directed. |
| 97 | S & F in replacement Inverter LED Bulb B22 cap9 watt with Opal diffuser, IP20 4 Hrs backup.Make:- Halonix/Philips/Havells/Bajaj/Crompton. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
