|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: |
| 2 | All Kinds of soil. |
| 3 | Ordinary rock |
| 4 | Laying and fitting of G.l. pipes complete excluding cost of pipes and Earth work: |
| 5 | 50 mm dia G.I |
| 6 | 25 mm dia G.I |
| 7 | 20 mm dia G.I |
| 8 | Providing fitting ofM.S Flanges for the 80mm dias ( 10mm thick) class “A” rating to sustain high pressureupto 25kg/cm2 by way of weldingG.I pipes including cutting of threaded portionshall be returned to Divisional Store) the job includescost of nuts, bolts washers etc and carriage of pipes from Divisional store upto workshop, then workshop upto road site of work incl , jointing , successful testing and commissioning complete all told |
| 9 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : |
| 10 | 150 mm dia. Pipe |
| 11 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket. 150 mm dia pipes |
| 12 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) |
| 13 | 40mm dia G.I |
| 14 | 50mm dia G.I |
| 15 | Providing/ laying and fixing of flanged jointed pipes incl. cost of nuts, bolts, rubber gasket etc., complete (flanges 10 mm thick). |
| 16 | 100mm dia G.I |
| 17 | 65mm dia G.I |
| 18 | Fabrication providng and fixing of 6mm thick M.S bends of required degree as per site incl. all carraiges upto site of work. |
| 19 | 100mm dia Bend |
| 20 | 80mm dia bend |
| 21 | 65mm dia Bend |
| 22 | Providing and fixing of C.I sluice valves/ Gate Valves of reputed make with all accessories and all carraiges upto site of work. |
| 23 | 150mm dia C.I Sluice Valves |
| 24 | 100mm dia C.I Sluice Valves |
| 25 | 80mm dia Gate Valves |
| 26 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. |
| 27 | Providing stone soling and dumping in horizonalal in level quarry |
| 28 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. |
| 29 | 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) |
| 30 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. |
| 31 | 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed. |
| 32 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level.1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) |
| 33 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen\"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement.1:2:4 (1 cement: 2 coarse sand: 4 graded crushed stone aggregate 20mm nominal size) |
| 34 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 35 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) (A) Crushed |
| 36 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level.1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 37 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement.1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size) |
| 38 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate |
| 39 | Centering and shuttering including strutting , propping etc annd removal of form work for : |
| 40 | Foundations, footing, bases of columns. |
| 41 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 42 | Lintels, beams, plinth beams, girders, bressumers and centilevers. |
| 43 | Suspended floors, roofs, landings, balconies and access platform. |
| 44 | Edges of slabs and breaks in floors and walls. Under 20 cms wide |
| 45 | Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth inCement mortar 1 :4 ( 1 cement : 4 coarse sand) |
| 46 | Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) |
| 47 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. |
| 48 | Strctural steel work in single section fixed without connecting plate including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 49 | Providing and fixing G. I. chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per direction of Engineer-in-charge.Made of G. I. wire of dia 4mm |
| 50 | Applying priming coat:with ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanised iron/steel works |
| 51 | Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shadeNew steel work (two or more coats) |
| 52 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 coarse sand) |
| 53 | 15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand) |
| 54 | Providing wood work in frames of doors , windows clerestory windows and other frames , wroguth framed and fixed in position with hold fast lugs (KD/ Silver wood). |
| 55 | Providing and fixing galzed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) glass panes including black enamelled ISI marked M.S butt hinges with necessary screws (KD/ Silver Wood). |
| 56 | Providing and fixing 30mm thick wire guaze shutters using galvanised M.S wire gauze of avergae width for aperture 1.4mm with wire of dia 0.63mm for doors windows and clerestory windows including ISI marked brgith finsihed 0r/ and black enamelled M.S butt hinges with necessary screws (KD/ Silver Wood). |
| 57 | Providing /Fixing of coloured tin G.S Sheet roofing fixed with polymer coated J or L hooks , bolts and nuts 8mm diameter with bitumen and G.I limpet washersexcluding the cost of purlins, rafters and trusses( 0.50 mm thick coloured CGI Sheets) |
| 58 | P/F of G.S plain coloured eves boarding of 250mm wide of standard thickness incl all carraiges upto site of work ( 0.50mm thick ) |
| 59 | P/F G.S coloured weather boarding of standard thickness with all carraige. |
| 60 | Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 61 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 62 | Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mmthick with 20mm nominal size stone aggregate. Crushed. |
| 63 | Steel wrok welded in built up sections / framed work including cutting hoisting fixing in position and appplying a priming coat of approved steel primer using structural steel etc as required. In stringers rtreads landings etc of stair cases including use of chequered plate wherever required all complete |
| 64 | Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10 sqm. |
| 65 | Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface Water thinable Cement primer. |
| 66 | Providing hoisting and fixing of wood work for trusses/purlins rafters/posts/ post-plates including cost of screws etc., complete (Popular Wood).. |
| 67 | P/Fof PVCmain hole cover with frame complete incl carraiges 0.45x0.45 Mtr . |
| 68 | Dry random rubble masonry with hard stone in foundation and plinth:Using quarry stone with bond stone. |
| 69 | Electrification inside and outside including service lines main control board with all required control devices and accessories of approved make complete in all respects ( concealed in PVC conduct) |
| 70 | Lighting points |
| 71 | Heating Points |
| 72 | Bulk head outside Lights |
| 73 | Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 74 | 250x10 mm |
| 75 | 100x10 mm |
| 76 | Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. |
| 77 | 125 mm |
| 78 | 100 mm |
| 79 | Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 80 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 81 | Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.: INTERNAL WORK-Exposed on wall 15 mm dia. nominal bore |
| 82 | Providing fixing of PVC pipes/ pipe specials of reputed make ( Prince Type ) with all carraiges complete. |
| 83 | 100mm dia |
| 84 | 80mm dia |
| 85 | Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) \"manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Long pan pattern white vitreous china W.C. pan of size 580 mm. |
| 86 | Providing and fixing Salem Stainless Steel A lSI 304 (18/ 8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required:610x510mm bowl depth 200mm |
| 87 | Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 8931a) 15 mm nominal bore |
| 88 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore |
| 89 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 893115 mm nominal bore |
| 90 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license]. |
| 91 | Providing fixing of various PVC fittings with all carraiges complete. |
| 92 | 100mm dia door Junction |
| 93 | 100mm dia Bend |
| 94 | 100mm dia collar |
| 95 | 100mm dia Gasket |
| 96 | 80mm dia door Junction |
| 97 | 80mm dia floor trap |
| 98 | 80mm dia bend |
| 99 | 80mm dia collar |
| 100 | 80mm dia Gasket |
| 101 | Floor Pvc grating |
| 102 | Providing fixing of MS lid cover 4mm thick of 0.60x0.60m with angle iron frame 0.45x0.45x5mm including priming coat, two coats of paint and incl. locking arrangement and all carraiges complete. |
| 103 | Laying water bound macadam with specified stone aggregate stone screening and binding material including screening, sorting, spreading to template and consolidation with power road roller of 8 to 10 tonne capacity etc. complete (Payment for stone aggregate, screenings, kankar, moorum and red bajri etc. to be made separately) : |
| 104 | Subbase with stone aggregate 90 mm to 45 mm including stone screenings 13.2 mm size. |
| 105 | Base course with 63 mm to 45 mm size including stone screenings 13.2 mm size. |
| 106 | Base course with 53 mm to 22.4 mm size including stone screenings 11.2 mm size. |
| 107 | Providing fixing of hallow cement concreate bricks in 1:4 cement sand mix including all carraiges. |
| 108 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 109 | Removing of filter media from filter beds including stacking within 50mtr lead. |
| 110 | Providing fixing of 200mm dia C.I sluice valve of approved make with all accessories and all carraiges complete. |
| 111 | 2.5 em premix carpet surfacing with 2.25cu.m. and 1.12 cu.m of stone chippings of 13.2 mm and 11.2 size respectively per 100 sq.m. and 52kg. and 56 kg. of hot bitumen per cu.m. of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately). With paving Asphalt 80/100 heated and then mixed with solvent at the rate of 70 sqm 174.55 grams per kg of asphalt. |
| 112 | Carriage of material from sources upto Actual site of work by Mechanical Transport incl. loading, unloading and stacking. |
| 113 | Khak Bajri Grade II & III avg lead 05 Km |
| 114 | Cement/ steel for avg lead 08 Kms |
| 115 | Sand avg lead 08 Kms |
| 116 | 20mm stone Aggregate for avg lead 15 Kms |
| 117 | 40mm stone Aggregate for avg lead 15 Kms |
| 118 | Bricks for avg lead 80 Kms |
| 119 | Stone Soling for avg lead 12 Kms |
