Construction Of Assistant Engineer Office And Residential Building Of Jal Shakti Sub Division Tihra In Tehsil Dharampur District Mandi Hp Site Development, C / O Assistant Engineer Residence I / C Sanitary And Electrical Installation, Septic Tank
Tender Value
57.41 Lakhs
Estimated cost
Bid Submission
27 Jan 2022
0 days left
EMD
89915
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tihra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Assistant Engineer Office And Residential Building Of Jal Shakti Sub Division Tihra In Tehsil Dharampur District Mandi Hp Site Development, C / O Assistant Engineer Residence I / C Sanitary And Electrical Installation, Septic Tank
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in soil in hilly area by mechanical means including cutting and trimming of side slope and desposing of excavated earth with a lift up to 1.5m and a lead upto 20m. |
| 2 | Excavation in foundation and trenches in earth work upto all depth in all kinds of soil such as pick work jumper work, blasting work, chiselling of soft /hard rock where blasting is prohibited in all leads and lifts and including trimming of sides levelling of bed to correct grade stacking the excavated soil in 15cm.layers when required into plinth sides of foundation including consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed in all leads including lifts and soring/strutting timbering and dewatering where ever required as per thr direction and to the entire satisfaction of the Engineer-in-charge. |
| 3 | Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size ) and curing complete excluding cost of form work in Walls any thicknessbut not less than 0.1m thickness including attached pillaster buttresses, plinth and string courses from top of foundationlevel upto all floor level within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 4 | Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size ) and curing complete excluding cost of form work in foundation and plinth within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 5 | Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu- reinforcement concrete and plain concrete work in:- |
| 6 | Foundation footing bases of columns etc and mass concrete. |
| 7 | Columns, pillars, post and struts. |
| 8 | i) Square, rectangular or polygonal in plan. |
| 9 | Beam, cantilever, girders and lintels. |
| 10 | i) Sides and soffits of beam, beam haunching, cantilever, bressumers and lintels not exceeding 1 mtr. In depth in all heights from floor. |
| 11 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like. |
| 12 | i) Floors etc. up to any thickness. |
| 13 | Vertical surfacessuch as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like. |
| 14 | Edges of slab and breaks in floors and wallsunder any width. |
| 15 | Stair cases with sloping or stepped soffits excluding landings. |
| 16 | Providing & Laying cement concrete work 1 : 1.5 : 3 (1 cement : 1.5 sand : 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- |
| 17 | Foundation footing bases of columns etc and mass concrete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 18 | Suspended floors, roofs, landing and shelves and their support, balconies, beams, girders, bressumers and cantilever upto all floor level within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 19 | Walls any thicknessbut not less than 0.1m thickness including attached pillaster buttresses, plinth and string courses from top of foundationlevel upto all floor level within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 20 | Colunms pillars posts and strutsSquare, rectangular or polygonal in plan within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 21 | Lintels,beams, girders, bressumers and cantilevers upto floor two level within all lead and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 22 | Stair cases (Except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto all floor level within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 23 | Providing and laying cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding the cost of form work and reinforcement in:- |
| 24 | Suspended floors, roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 25 | Providing mild steel / Tor steel reinforcement for RCC work including bending binding and placing in position complete upto all floor level within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 26 | Providing and laying no fine cement concrete 1:6 (1 Cement : 6 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in cement mortar 1:6 as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 27 | Brick work using common burunt clay building bricks in foundation anf plinthl in cement mortor 1:4 (1 cement : 4 sand) (2nd class brick) within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 28 | Providing and fixing precast concrete manhole cover and frame, conforming to IS 12692-2002, 560mm dia completeas per direction and to the entire satisfaction of Engineer-in-Charge. |
| 29 | Provdiing and laying 20 cm thick composit stone masonry with stone masonry with stone facing of chisel dressed stone one line dressed in cement mortar 1:6 (1 cement :snnd) and concrete backing with cement concrete 1:3:6 (1cement :3and :6 graded stone aggregate 20 mm norinal size) on inner face of walls including cenrting shuttering and propping complte upto floor two level. |
| 30 | Providing and laying heavy duty stone paver over sub-base of concrete with 25 mm thick average thickness of cement mortar 1:4 (1 cement, 4 Sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete in all leads and lift as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 31 | Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position. (2nd class deodar wood) within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 32 | Providing and Fixing panneled glazed or panelled and glazed shutters for doors, windows and clerestory windows,including black enamelled iron butt hinges with necessary screws. 40 mm thick. (2nd class deodar wood) within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 33 | Providing and Fixing wire gauge shutters using galvenised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors, windows & clearstory windows i/c bright finished black iron enamelled hinges with necessary screws 40 mm thick (2nd class deodar wood) within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 34 | Providing & Fixing M.S. plain grills of required pattern and design in iron frame of window etc.with M.S. flats, square or round bars with round headedbolts and nuts by screws complete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 35 | 6mm cement plaster to ceiling in cement mortar 1:3 ( 1Cement :3 Sand) within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 36 | 15 mm cement plaster in single coat on rough side of brick/concrete stone walls for interior plastering up to floor two levels including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1 cement: 6 sand) within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 37 | Stone soling/boulder filling dry hand packed in under floor within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 38 | Providing and laying granite stone in flooring 20mm (average) thickness base of cement mortor 1:3 (1cement : 3sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete. 20 mm thick within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 39 | Providing and laying Action Tessa argentum flooring AC-3 of 12mm thickness of size 1214mm (L)x 193mm (W) over superior high density hard wood fibre board complete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 40 | Providing and laying Duro stone vetrified tiles(300x300mmx10mm) in grey/coloured or of approved shade in flooring,treadsofstepsandlanding laid on a bed of 12mm thick cement mortar1:3(1cement:3sand)laid overandjointedwithneatcement slurryfinishedwithflushpointingin whitecementmixedwithpigment of required shade to match the shade of tiles complete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 41 | Providing and fixing 10mm thick anti skidwaterproofstainandimpect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mmmanufacturedof approvedshadeandcolourin flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3(1cement :3 sand)jointed with cement slurry mixed with pigment to match the shade oftilesas required complete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 42 | Providing and Fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & Fixing with nails & screws etc. complete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 43 | Providing and Fixing 19mm thick Commercial Board water proof shutters for up boards i/c Fixing with nickel plated piano hinges with screws etc. complete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 44 | Providing and Fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge |
| 45 | Providing 40x3 mm iron hold fast 40 cm long including Fixing to frame with 10 cm da bolts nuts and wooden pluges and embencing in C.C. block 30x10x15 cm 1:3:6 ( 1 cement:3 sand: 6 gradedstoneaggregate 20 mmnominal size) within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 46 | Providing and fixing bright finished brass sliding door bolt with bolts and nuts screws etc within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 47 | 300 x 16 mm |
| 48 | Providing & fixing bright finished brass tower bolts (barrel type) with screws etc. within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 49 | 250 x 10 mm |
| 50 | 200x10 mm |
| 51 | Providing and Fixing bright finished brass handles with necessary screws etc. complete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 52 | 125 mm |
| 53 | 100mm |
| 54 | Providing and Fixing oxidized M.S. Hooks and Eyes 150 mm within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 55 | Providing and Fixing 100 mm bright finished brass floor door stopper with rubber cushion screw etc. to suit shutter thickness complete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 56 | Steel work welded in built up section, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paintin grating, framed guard bars ladders, railing brackedts and similar works as per direction of Engineer-in-Charge upto all lead and lift. |
| 57 | Steel work welded in built up sections, trusses and framed work including cutting hoisting Fixing in position and applying a priming coat of red lead paint :- In beams joists channels ,angles, tee, flats with connection plates or angle cleats as in main and cross beems, hip and jack rafters, purlins connected to common rafters and the like within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 58 | Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete. 75mm Nominal bore within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 59 | Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1cement:3sand:6 graded stone aggregate 20 mm nominal size within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 60 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete . |
| 61 | Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 62 | Applying priming coat over new wood and wood based surfaces after and inciuding preparing the suface be thoroughly cleaning oil grease dirt and othr foreign sand papering and knotting Readymixed paint brushing wood primer pink within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 63 | Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paintto give an even shade including cleaningthe surface of dirt, dust and other foreign matters sand papering and stopping with enamel paint other than white within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 64 | Applying priming coat over new steel & other metel surface after and including preparing the surface by throughly cleaing oil, grease, dirt & other foreign matter and scourd with wire brushes fine steel wool scrapers and sand paper complete with ready mixed priming paint brushing red lead, red oxide/zinc oxidewithin all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 65 | Painting two coats (excluding priming coat) over new steel and other metal surfaces,with enamel paintto give an even shade including cleaningthe surface of dirt ,dust and other foreign matters sand papering and stopping with enamel paint other than white within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 66 | Providing and fixing liquid soap container with C.P. Brass lid and brackets fixed to wooden plugs with C.P. Brass screws :- Plastic container within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 67 | Providing and fixing white vitreous China pedestal type water closet (European type) with seat and lid, 10 liter low level white vitreous china flushing cistern & C.P. flush bend and fittings & C.I. brackets, 40mm flush bend, overflow arrangementwith special of standard make and mosquito proof coupling of approved municipal design complete i/c painting of fittings and brackets cutting holes in walls and making good wherever required. (Asian Paints Make one piece) |
| 68 | Providing and Fixing brass curtain rail with rollers stop and brackets in pelmet instead of wooden curtain rods 25 mm dia and brackets 1st class deodar woord (actuallength) of railto be measured within all leads and lift in all respect as per direction and satisfaction of Engineer in charge. |
| 69 | Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings. Flat back 630x450mm Asian paint make with pedestal within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 70 | Providing and Fixing 600 mm x 450 mm bevelled edge mirror of superior glass marked on 6mm thick AC sheet or plywood sheet and fixed to wooden plug with CP brass screws and washer within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 71 | Providing and Fixing CP Brass towel rail complete with CP Brass brackets fixed to wooden plug with CP Brass screws 750 mm x 20 mm within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 72 | Providing and Fixing 600 mm x 120 mm glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P. Brass screws within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 73 | Providing and Fixing Toilet paper holder C.P. brass within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 74 | Providing and fixing C.P. brass angle valve 15mm without Nuts and pipe within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 75 | Providing & fixing 15 mm mixer kitchen sink with top/bottom swinging spoutas within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 76 | Providing and fixing C.P. brass pillar cock of Jaquar Make Fonte Type within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 77 | Providing and Fixing 100 mm dia cast iron plated grating of superior quality for floor, gully or Nahni trap within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 78 | Providing and Fixing wall mixing faucet for shower and bath with overhead pipe (1210cm) and bathshower within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 79 | ProvidingandfixingC.P.Brass Soap dish withC.P.Brassbracketsfixedto wooden plugs with C.P. Brass screws within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 80 | Providing and fixing to wall, ceiling & floor, galvanised mild steel tube (Heavy Class), tube fittings & clamps i/c making good wall, ceiling and floor within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 81 | 20mm dia Nominal Bore TATA Make |
| 82 | 15mm dia Nominal Bore TATA Make |
| 83 | Providingandfixingstainlesssteelkitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes andmakinggoodthesamebutexcluding fitting. 610 x 510 mm with bowl depth 200 mm within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 84 | Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outletconnection, 15mm nominal bore ball valve and mosquito proof PVC cover with lockingarrangement including hoisting up to all heights above ground level :-1000 litres net capacity tank within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 85 | Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and Fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18\" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 86 | 25 Liter capacity water heater (Cat-A) |
| 87 | Wiring for light point / fanpoint /exhaust fan /call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 88 | Group A |
| 89 | Group C |
| 90 | Supplying and drawing following sixe PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 91 | PVC insulated HRFR LS Copper conductor 1.5 Sq.mm. |
| 92 | 3X1.5 Sq.mm |
| 93 | 3X4.0 Sq.mm |
| 94 | Supplying & Fixing of G.I. modular boxes of (140mmx78mmx50mm) size along with modular base and cover platefor modular switches in recess including providin and fixing 5 pin 5/6 Amp. modular socket outlet and 5/6 Amp modular switch, connection etc. as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 95 | Supplying & Fixing of G.I. modular boxes of (140mmx78mmx50mm) size along with modular base and cover platefor modular switches in recess including providin and fixing 6 pin 15/16 Amp. modular socket outlet and 15/16 Amp modular switch, connections etc. as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 96 | Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 97 | 20 mm dia |
| 98 | 25 mm dia |
| 99 | Supplyingand Fixingoffollowingway, singlepoleandneutral sheetsteel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 100 | Double door-6 way |
| 101 | Double door-8 way |
| 102 | Supplying and Fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 103 | 25 Amps. Cat-A. |
| 104 | Supplying and errection of 6 Amp to 32 Amp rating, 10 KA breaking capacity 240 Volts, C-curves minituature circuit breaker of following poles in the existing MCB DB complete with connections as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 105 | Single poleCat-A. |
| 106 | Wiring for light/power plug with 2X10 Sq. mm. PVC insulated copper conductor single core cable in surface/recessed steel conduit along with 1 No.10 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 107 | Wiring for circuit / sub-main with 4x6 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No. 6 Sq.mm. (4x6+2x6) HRFRLS/PVC insulated single core copper conductor cable for earthing as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 108 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required. |
| 109 | Exhaust Fan, Light duty, (Domestic) 225 mm sweep |
| 110 | Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and Fixing phenolic laminated sheet cover on the fan boxand earthing etc. as required. |
| 111 | Ceiling Fan 1400 mm sweep, Category-A |
| 112 | Supplying and Fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:- |
| 113 | Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 114 | Supplying and laying 8 SWG copper wire at 0.50 mtrs below ground level for earth electrode conductor including soildering etc. as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
AI Tender Summary
Tender Timeline
Jan 19, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJan 27, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 28, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender