}

Construction And Repairing Of Cc Road, Drain And Cross Work At Various Places In W.No. 61, Ajmer Ajmer., ajmer-Rajasthan

Department Of Local Bodies has published Construction And Repairing Of Cc Road, Drain And Cross Work At Various Places In W.No. 61, Ajmer Ajmer.. Submission Date for this Tender is 30-01-2022. Drainage Tenders in ajmer Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

30751192
Construction And Repairing Of Cc Road, Drain And Cross Work At Various Places In W.No. 61, Ajmer Ajmer.
Open Tender
Indian
Rajasthan
ajmer
30-01-2022

Tender Details

Construction And Repairing Of Cc Road, Drain And Cross Work At Various Places In W.No. 61, Ajmer Ajmer.

Key Value

Document Fees
INR 500 /-
EMD
INR 20000.0 /-
Tender Value
INR 10 Lakhs /-

BOQ Items

Name of Work :- okMZ ua- 61 es fofHkUu LFkkuksa ij ukyh@ØkWl lh0lh0lM+d dk fuekZ.k@ejEer dk;ZA
Sl. No. Item Description
1Earth work in excavation for roadway, including trimming bottom and side slopes in accordance with requirement of line, grades and cross sections, including disposal of surplus material with all lift and lead upto 1000 metre as per MoRT&H specification clause 301. In all type of soil
2Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level. In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m
3Carriage of Materials by mechanical transport including loading, unloading and stacking : Earth 6 KM
4Providing and laying lean cement concrete 1:4:8 in Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in concrete mixer, laid manualy, compacted with surface vibrator, finishing and curing complete as per clause 601, 112 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion
5Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : 22.1.1 Foundations, footings, bases of columns, etc. for mass concrete
6Providing and laying un-reinforced, plain cement concrete mix with concrete Mixer & vibrator pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate conforming to IS : 383, maximum size of coarse aggregate not exceeding 25mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints etc including all material labour, machinery, lighting, guarding and maintenance of diversion.PCC M-20
7Providing and laying of position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:1½:3( 1cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size)
840 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 ( 1cement : 5 coarse sand) with joints finished flush .white sand stone
9Providing and laying TMT bar reinforcement at any level in foundation/ pile/ pile cap complete as per drawing and clause 1600 of MoRT&H Specification including all material, labour and machinery.
10Providing and fixing of reinforced Ferro-Cement drain covers designed for "AA" class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted M.S. plate , Rim and M.S. lifting hooks, Admixtures like plasticizer, bond improving compound, shrinkage, resistancecompound, abrasion resistant complete as per approved design etc.
11Standard Size 600x800mm (75mm thick) for span 300 to 450mm
12Standard Size 1000x800mm (100mm thick) for span 451 to 700mm
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail