Bids Are Invited For 1 Demolition Of Cement Concrete Of Any Description N.Exc 15Cm Thickness ( Below Or Above Ground Level ) 2 Demolition Of Brickwork / Stone Masonry / Precast Articles / Jalli Built In Cement Mortar. 3 Excavation, Delhi-Delhi

Bids Are Invited For 1 Demolition Of Cement Concrete Of Any Description N.Exc 15Cm Thickness ( Below Or Above Ground Level ) 2 Demolition Of Brickwork / Stone Masonry / Precast Articles / Jalli Built In Cement Mortar. 3 Excavation In Trenches In Soft / Loose Soil Not Exc 1.5M In Width And Not Exc 1.5 In Depth For Foundation And Getting Out. 4 M&L Pcc 1:4:8 Type D.2 ( 40Mm Graded Agg ) As In Fdn Filling And Mass Concrete. 5 M&L Brickwork With Sub Class B Bricks Straight Or Curved On Plan Exc 6 M Mean Radius Built In Cm 1:4 6 M&L For Pcc 1:2:4 Type B-1 ( Using 20 Mm Graded Stone Aggregate ) In Coping Etc Including Necessary From Work Complete All As Specified. 7 M&L 15 Mm Thick Rendering In Cm 1:4 On Brick Surfaces Finished Even And Smooth Without Using Extra Cement Comlete All As Specified 8 M&L For Preparation Of New Plastered Surfaces And Applying Two Coats Of Cement Base Paint On Walls Over A Coat Of Alkali Resistant Priming Paint All As Specified. 9 M&L 75 Mm Thick Pcc 1:4:8 Type D-2 ( Using 40Mm Grade Stone Aggregate ) As In Sub Floors, Sub Bases , Flooring Etc 10 M & L For Machine Pressed Precast Concrete Interlocking Paver Block Any Shape And Size With Grey Cement And Coloured Pigment Confirming To Is 15658-2006 Of 60 Mm Thickness, M-35 Grade Over 25Mm Thick Coarse Sand All As Specified And Directed 11 M&L For Sand Filling Under Floors Or In Foundation Including Watering And Consolidating All As Specified. 12 Dismantling Wrought Iron Or Mild Steel Of Any Description Not Otherwise Provided. 13 Dismantling Of Unserviceable Chain Link Fencing Fixed With Any Post In Any Position 14 S&F Hand Rails, Half Round Or Other Steel Section Or Core For Wooden Hand-Rail Straight Portion, Drilled And Countersunk For Balusters Running Bars, For Doors, Balusters, Nosing To Steps Including Embeding In Concrete And Screwing Etc. Wind Ties For Roof Including Securing Bolts; Posts And Struts In Fencing Including Cutting Tops To Shape As Directed, Drilling Holes, Notching For Wire, Etc.; Flat Iron Fillets ( For Securing Wire Mesh Etc. ) Including All Necessary Drilling, Bolting Or Riveting, Etc., And Similar Work Conforming To Fe-290 Gde E-165 15 M&L For Excavating In Post Holes Or Similar Work Each Not Exceeding In Hard Dense Soil Getting Out And Returning Filling And Ramming Including Watering Etc And Removing Surplus To A Distance N.Exc 50Mtr And Making Good To Ground 16 M&L For Cement Concrete 1:3:6 Types C-2 With 40 Mm Graded Aggregate As In Foundation, Filling And Mass Concrete. 17 Supply Only Chain Link Ms Galvanised Fencing Of Any Size Or Type As Approved By Engineer-In-Charge 18 Fixing Only Chain Link Fencing Including Line Wire, Any Mesh, Size And Type To Any Of Standards, Rails, Straining Blots Etc Including Provision Of Blinding Wire 19 Refixing Only Chain Link Fencing Including Line Wire Ms Flat With Nut And Bolt Obtained From Item No- 06 As Directed By Engr-In-Charge 20 S&F 12 Mm Dia Gi Round Bar Fixed In Any Position Including Jointing Either Welding Or Hooks As Directed As In Line Wire For Chain Link 21 Supply Only Chain Link Ms Galvanised Fencing Of Any Size Or Type As Approved By Engineer-In-Charge 22 Fixing Only Chain Link Fencing Including Line Wire, Any Mesh, Size And Type To Any Of Standards, Rails, Straining Blots Etc Including Provision Of Blinding Wire 23 S&F In Repair Galvanized 2 Strand Steel Barbed Wire 2.24 Mm Dia Barbed With 2 Mm Dia Barbs At 75 Mm Spacing And Straining And Fixing To Any Type Of Standard Rails Straining Bolt .Including .Securing Or Tying At Crossing With And Provision Of Galvanized Mild Steel Wire Staples Or Steel Pins Etc. As Directed ( Each Line Wire To Be Measured ) 24 M&L Mild Steel Work Such As Flat Iron, Round Bars Fixed Independently As Fillets For Securing Chain Link Fencing Including All Necessary Drilling For Bolting Etc Confirming To Fe-410-0 Or Fe-310-0 Complete All As Specified. 25 Supply Only Mild Steel Bolts ( Machine Made ) With Hexagonal Or Square Head At One End And Screwed The Other End With Washeres And One Hexagonal Or Square Nuts Length Of Bolt Exc 10Cm Long And Dia Of Shank 11 To 15Mm 26 M&L For Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer On Newly Untreated Surfaces Of Steel Over 10Cm In Width Or Girth Not Otherwise Described

Refer document

Refer document

Refer document