Military Engineer Services-MES has published Repair To Flooring Plastering Toilet And Bathroom Of Jco Or Otm Accn Repairs To Joinery Flooring Plastering Toilet And Bathroom Of Otm And Office Complex Of Age Bri Under Ge Nagrota. Submission Date for this Tender is 07-02-2022. Toilet Bathroom Tenders in nagrota Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlarfacings dressed stone work and precast concrete articles. |
| 2 | Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc. |
| 3 | M&L for Brick work with sub class “B” bricks straight or curved on plan exc 6M mean radius build in CM 1:6 using all as specified using old size bricks |
| 4 | M&L for Rendering 15mm thick onfair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement all as specified |
| 5 | M&L forRendering 15mm thick onfair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as specified ( internally) |
| 6 | Preparation of newly plastered surfces of walls and applying two coats of oil bounddistemper over a coat of wall care putty 3mm thick |
| 7 | Preparation of old plastered surfces of wall and applying two coats of cement base paintover a coat of wall care putty 3mm thick |
| 8 | Preparation of newly plastered surfces of walls and applying two coats of Cement Base Paint over a coat of primer complete all as spd and as directed |
| 9 | Preparation of old plastered surfces of walls and applying two coats of Cement Base Paint over a coat of primer complete all as spd and as directed |
| 10 | S&FNon-skid ceramic colouredtiles 7 to 8mm thick area of each tile exceeding 0.11sqm but n exc 0.18 Sqmin floors etc set and jointed inneat cement slurry and pointed in white or coloured cement to match over 15 mm thickscreed bed or beddding layer of CM 1:4 including complete all as spd and directed. |
| 11 | Glazed ceramic tiles coloured (Premier quality)in vertical surface of size 300mm x200 mm x 7mm thick jointing in neat cement slurry and pointing in colour cement to match includingincl 10mm thick screed bed/bedding layers in cm 1:4 |
| 12 | M & L for Virified Ceramic tiles 10 mmthick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm,as in patches in floors, set and jointed with cement slurry and pointed with white or coloured cement to match withtiles over and including 15mm thick screed bed in cement mortar 1:6 complete. |
| 13 | M & L for25 mm thick PCC 1:2:4 type B-1 (20 mm graded crushed stone aggregate) as a sub base toreceive topping layer finished even and rough |
| 14 | Preparing of Old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge. |
| 15 | 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane including hacking out old glass panes all as spd |
| 16 | S & F Aluminium anodised handle extruded section and fixed of size 150mm all as specified and directed |
| 17 | S & F in repairs Aluminium anodised handle extruded section and fixed of size 150mm all as specified and directed |
| 18 | S & F in Aluminiumsliding door bolts clamps type (ISI Marked), 300mm long, with bright bolt not less than 12mm dia with and incl a minium of 6 bolts and nuts, four on bolt plates and two on staple plate all as specified and directed |
| 19 | S & F in Aluminiumsliding door bolts clamps type (ISI Marked), 250mm long, with bright bolt not less than 12mm dia with and incl a minium of 6 bolts and nuts, four on bolt plates and two on staple plate all as specified and directed |
| 20 | S & F in repairs Aluminiumsliding door bolts clamps type (ISI Marked), 250mm long, with bright bolt not less than 12mm dia with and incl a minium of 6 bolts and nuts, four on bolt plates and two on staple plate all as specified and directed |
| 21 | Aluminium anodised barrel tower bolts extruded section and fixed in repairs of size 150 mmall as specified and directed |
| 22 | Aluminium anodised barrel tower bolts extruded section and fixed in repairs of size 100 mmall as specified and directed |
| 23 | S & F for 75 mm long Butt hinges, (ISI marked) medium weight cold rolled mild steel fixed with screws or welding fixed in repair including taking down shutter and refixing in same position |
| 24 | S & F for Mild steel Helical door springs including roller plate complete of 150mm long |
| 25 | 18/19 mm thick solid PVC board, as in cupboard shutters, partition walls and shelves fixed with frame complete all as specified and directed. |
| 26 | Supply and fix for PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed. |
| 27 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing given in SSR -2010 (Part-II) colour shade as approved by GE complete all as specified and directed. |
| 28 | Glazed ceramic coloured printed tiles (first quality) of size 300 x 600 x 7mm thick (exc 0.11 but n exc as in 0.18Sqm)vertical surface dado/skirting, set and jointed in neat cement slurry and pointing in coloured cement to match the shade of tileover 10mm thick cement scredd bed in CM 1:4 complete all as specified and directed. |
| 29 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spd and directed |
| 30 | M&L of Machine cut kota stone flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) (Each stone not less than 55 cms x 55 cms) over 15mm thick screed bed in CM ( 1:4) as in floor finished roughincluding roughening of existing surfaces by pick axicess and applying a coat of cement slurry @ 03 Kg/Sqm of surface. |
| 31 | M & L for 25 mm diaaluminium anodiseddreproy rod powder coated teak wood textured finishand wall thickness 1mmcomplete designed and patterned as approved by Engr-In-Charge |
| 32 | Demolition of Concrete (Unreinforced) of any description and in anypositionnot otherwise specifically provided for complete all as specified and directed. |
| 33 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as directed. |
| 34 | Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as directed. |
| 35 | Material and labour for 15mm bore GI pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed. |
| 36 | Material and labour for 20mm bore GI pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed. |
| 37 | Material and labour for cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps cills chases for concealed water tubing exc. 10cm but not exc. 20cm girth complete all as specified and as directed. |
| 38 | Supply and fix in repair for 15mm stop valve fancy type chromium plated with long shank and, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or union complete all as specified and as directed. |
| 39 | Supply and fix in repair for 15mm stop valve/ angular stop cock fancy type chromium plated alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or union complete all as specified and as directed. |
| 40 | Supply and fix in repair for PVC connections pipe 15mmsize, with PTMT nuts of length 600mm complete all as specified and as directed. |
| 41 | Supply and fix in repairs for 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. |
| 42 | S & F in repairs brass chromium plated shower rose 125mm size with or without swivel joint any size including fixing to steel pipe or union all as specified and directed by Engineer - in - Charge. |
| 43 | Supply and fixing jet chromium plated (health faucet with 01 m PVC pipe) for 15mm bore with fittings, fixed as in repairs complete all as specified and directed. |
| 44 | Fancy Type CP long body bib tap cast copper alloy with crutch or butterfly handle 15mm bore screwed down screwed for iron pipe (ISI marked) or equivalent as approved |
| 45 | Bib tap15 mm standard of PTMT any colour screwed for iron pipe (Minimum weight 15mm-90 gms) Make : PRAYAG (Standard range) or equivalent as approved |
| 46 | M&L waste pvc pipe for wash basin complete all as specified and directed |
| 47 | Rotational moulded polyethylene (three layer) water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 litres all as specified in SSR Part-I. |
| 48 | All as per item No -21 here in before but 1000 litres. |
| 49 | 600mm x 450mm size beveled edge mirror of 6mm thick selected quality mounted on 6mm thick plywood with chromium plated screws with washer all as specified |
| 50 | PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including and 32mm dia PVC long bend for squat pattern/EWC, set with concrete and making good to floor, fixed as in repair complete all as specified & directed. |
| 51 | Plastic water closet seat cover, white closed pattern with flat bottom and cover and Brass chromium plated hinging device. |
| 52 | Wash hand basin, vitreous china, flat back , white ofsize550X400mm fixed as in repairs on existing brackets complete all as specified and directed. |
| 53 | Vitreous china squatting pan “Orrisa” pattern of size 580mm x 440mm “White” with integral foot rest & CI 100mm “P” trap (excluding flushing cistern and flush pipe) , connection to trap andto flushing pipe anti- syphonage pipe etc complete making good to floor including provn of glazed tiles complete all as specified and as directed by Engineer-in-charge |
| 54 | Stainless steel sink with drainage board made out of 1mm thick sheet for kitchen or laboratory with plug, washer, waste pipe etc including cast iron brackets, connecting union over all size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete |
| 55 | Vitreous china wash down closet pan (Pedestal pattern) white with ‘S’&"P"trap plastic seat cover white including connection to out going pipe & to flushing pipe, anti syphonage pipeetc complete all as specified and directed by Engineer-in-charge |
| 56 | Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty |
| 57 | Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutter of 851 to 1000mm in width & of weight between 61 to 81 kg |
| 58 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for like MH cover, bdrain pipe bed, hard standing etc complete all as specified. |
| 59 | M/L 75 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded granite stone aggregate) in base of flooring/ hard standing finished evern & smooth w/o using extra cement.. |
| 60 | M&L chequered cement tiles concrete20cm x20cm x 25mm thic, set jointed in neat cement slurry in floor including 15mm thick screed bed or bedding layer of mortar 1:4for laying floor finishes etc all as specified.. |
| 61 | 100mm bore CI floor trap with grating including jointing CI pipe in run lead, cutting holes in walls and making good surface as per existing. |
| 62 | All as per item No 61 here in before but 75 mm bore |
| 63 | Supply and fix in repair for 15mm bore bib taps, chromium plated alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 64 | 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s. Make : PRAYAG (Standard range) or equivalent as approved |
| 65 | Anodised aluminium window frame powder coated double rebated(16 gauge aluminium sectionISImarked, weighing not less than 0.55 Kg/RM ,size of frame 100mm )incl side hung /sliding glazedshutter and wire gauged window shutter, 5 mm thick tinted sheet glass selected quality of any colour, wire gauge ,hinges, necessary jointing cleat, glazing clips, rubber packing, aluminium handle etc, . and includingopening of AC complete,including taking down old window of any type(Design/pattern of the frame as approved by Engineer in Charge all as specified and directed.) Make : Jindal |
| 66 | Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size etc including taking down or and making good of disturbed surface all as specified below complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm(Section No 19584)(f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370).Make- Jinal Section, |
| 67 | Taking down existing old tarfelt, bituminous compoundincluding cleaning & removing debris to a distance exc 100 m n.exc.250m. |
| 68 | M&L for 10 mm rendering in CM 1:4 including water proofing compound @2% of cement over roof surfaces finished even and smooth without using extra cement complete all as specified Note:- WPC Mesured and Paid Separately. |
| 69 | Supplied only for Integral water proofing compound. |
| 70 | M&L for Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces |
| 71 | M&L forApplying evenly a tack coat of induatrial bitumen 85/25 grade @ 1.2 Kg/Sqm. |
| 72 | M&L forOne layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm , reinforced with non woven polyester fabric or weight not less than 150 gms per Sqm . Polymeric membrane shall be taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing(Note (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions (ii) A Minimum overlap of 100 mmand 75 mm shouldbe made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions (iii) The make of polymeric membrane shall be IWL India Ltd chennai. Ltd or "MOPLY FP" of Texsa India Ltd). NOTE : S&F of APP based polimeric membrane of approved manufacturer will belaid/fixedby authorised person of the same manufacturers units asper relevent IS. |
| 73 | Applying one coat of aluminium paint on top of APP membrane. |
| 74 | S&F 110mm dia PVC pipe single socketed in any length with rubber ring joints, fixed to walll and in trenches or in floors, fixed in repairs. |
| 75 | S&F in repairs Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof for 100 mm bore |
| 76 | M & L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, et Exc 250 and n exc 500 ltr. |
| 77 | M & L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, et Exc 500and n exc 1000 ltr. |
| 78 | PCC 1:2:4 type B-0 (12.50mm graded aggregate) as in padding finished even and smooth without using extra cement all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
