Renovation Of Quarter Nos Ii 08, 09, 11 Etc At Manit Bhopal
Tender Value
16.99 Lakhs
Estimated cost
Bid Submission
28 Jan 2022
0 days left
EMD
33980
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhopal → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Quarter Nos Ii 08, 09, 11 Etc At Manit Bhopal
BOQ
| Sl. No. | Item Description |
| 1 | NON DSR Item |
| 2 | Carriage of debris/building rubbish by tractor trolley with labour as per direction of Engineer in-charge, within a lead of 2 km. |
| 3 | DSR-2018, Item No. 15.57 |
| 4 | 15.57 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 5 | DSR-2018, Item No. 15.56 |
| 6 | 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 7 | DSR-2018, Item No. 15.25 |
| 8 | 15.25 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 9 | DSR-2018, Item No. 15.2.2 |
| 10 | 15.2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 11 | DSR-2018, Item No. 15.13.1 |
| 12 | 15.13 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :15.13.1 Of area 3 sq. metres and below |
| 13 | DSR-2018, Item No. 9.20.2 |
| 14 | 9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.20.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 15 | DSR-2018, Item No. 9.51.1 |
| 16 | 9.51 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.9.51.1 With 2nd class teak wood beading 62X19 mm |
| 17 | NON DSR ITEM SOR 2014(6.1.2) |
| 18 | 6.1 Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process ,crushing strength not less than 40kg /cm2 and water absorption not more than 15% in foundation and plinth i/c curing etc complete6.1.2 Cement mortar 1:6 (1 cement : 6sand) |
| 19 | DSR-2018, Item No. 13.1.1 |
| 20 | 13.1 12 mm cement plaster of mix : 13.1.1 1:4 (1 cement: 4 fine sand) |
| 21 | DSR-2018, Item No. 15.23.1 |
| 22 | 15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.15.23.1 For thickness of tiles 10 mm to 25 mm |
| 23 | DSR-2018, Item No. 14.80.2 |
| 24 | 14.80 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-incharge. 14.80.2 Orissa pattern W.C Pan of size 580x440 mm |
| 25 | DSR-2018, Item No. 17.68.1 |
| 26 | 17.68 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 17.68.1 White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend. |
| 27 | DSR-2018, Item No. 8.31 |
| 28 | 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 29 | DSR-2018, Item No. 11.37 |
| 30 | 11.37 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 31 | DSR-2018, Item No. 11.41.2 |
| 32 | 11.41 Providing and laying vitrified floor tiles in different sizesthickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.11.41.2 Size of Tile 600x600 mm |
| 33 | DSR-2018, Item No. 4.1.8 |
| 34 | 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) |
| 35 | DSR-2018, Item No. 8.2.2.2 |
| 36 | 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 8.2.2 Granite of any colour and shade 8.2.2.2 Area of slab over 0.50 sqm |
| 37 | DSR-2018, Item No. 9.9.2.2 |
| 38 | 9.9 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.9.9.2 Kiln seasoned and chemically treated hollock wood 9.9.2.2 30 mm thick |
| 39 | DSR-2018, Item No. 11.20.1 |
| 40 | 11.20 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).11.20.1 Light shade pigment using white cement |
| 41 | DSR 2018 Item No. 11.3.1 |
| 42 | 11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.11.3.1 40 mm thick with 20 mm nominal size stone aggregate |
| 43 | DSR 2018 item no. 17.7.4 |
| 44 | 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:17.7.4 White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 45 | DSR 2018 item no. 18.8.2 |
| 46 | 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 18.8.2 20 mm nominal outer dia Pipes |
| 47 | DSR 2018 item no. 18.718.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 48 | 18.7.1 15 mm nominal outer dia Pipes |
| 49 | 18.7.3 25 mm nominal outer dia Pipes |
| 50 | DSR 2018 item no. 12.41.2 |
| 51 | 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes. 12.41.2 110 mm diameter |
| 52 | DSR 2018 item no. 12.4212.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 53 | 12.42.1 Couple 12.42.1.2 110 mm |
| 54 | 12.42.3 Single tee with door12.42.3.2 110x110x110 mm |
| 55 | 12.42.5 Bend 87.5°12.42.5.2 110 mm bend |
| 56 | 12.42.6 Shoe (Plain)12.42.6.2 110 mm Shoe |
| 57 | DSR 2018 item no. 18.54.1 |
| 58 | 18.54 Providing and fixing PTMT bib cock of approved quality and colour. 18.54.1 15mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 59 | DSR 2018 item no. 18.63 |
| 60 | 18.63 Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms |
| 61 | DSR 2018 item no. 13.91 |
| 62 | 13.91 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 63 | DSR 2018 item no. 13.26 |
| 64 | 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 65 | DSR-2018, Item No. 14.1.1 |
| 66 | 14.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) |
| 67 | DSR 2018 item no. 13.42.1 |
| 68 | 13.42 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. 13.42.1 Two or more coats on new work |
| 69 | DSR 2018 item no. 13.90.1 |
| 70 | 13.90 Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : 13.90.1 Old work (one or more coats) |
| 71 | DSR-2018, Item No. 13.61.1 |
| 72 | 13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :13.61.1 Two or more coats on new work |
| 73 | DSR-2018, Item No. 13.99.1 |
| 74 | 13.99 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.99.1 One or more coats on old work |
| 75 | DSR ITEM NO. 2.34.1 |
| 76 | 2.34 Supplying chemical emulsion in sealed containers including delivery as specified.2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% |
| 77 | DSR ITEM NO. 2.35.2.1 |
| 78 | 2.35.2 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: 2.35.2.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration |
| 79 | Other Misc Work |
| 80 | Other Misc Work as per DSR 2018 on % rate basis Rs. 25000/- |
AI Tender Summary
Tender Timeline
Jan 17, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJan 28, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 31, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender