Repair And Renovation ( Phase-Ii ) Of Odisha Adarsha Vidyalaya At Baddalima Under Tiring Block In The District Of Mayurbhanj For The Year 2021-22.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
01 Feb 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
rairangpur → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Renovation ( Phase-Ii ) Of Odisha Adarsha Vidyalaya At Baddalima Under Tiring Block In The District Of Mayurbhanj For The Year 2021-22.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation of foundation in Ordinary soilincluding cost of all material, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants etc. complete as per the direction in of the Engineer in Charge. |
| 2 | Earthwork in excavation of foundation in all kinds of soil including dressing and levelling the bed to required depth and width and deposting the excavated materials away from work site as directed by Engineer in charge. |
| 3 | Filling foundation and plinth with sand well watered and rammed including cost coveyance, royality etc complete |
| 4 | Plain cement concrete(1:3:6) with hard granite metalof 40mm size including lowering and laying concreteinlayer rewuired level ramming watering curingincluding cost conveyance royalty taxesof all materialsrequiredfor the work and labour charges etc.complete. |
| 5 | Providing lifting, hoisting and laying R.C.C. of M-20 Grade to base of columns and footing, columns, beams, plinth band, lintels, chajja, shaft, fins, roof slabs, balconies, stair cases, parapets, window sills, lofts, railing, jally, copping or in places as shown in the drawing for all floors with 20mm and down graded size black hard crusher broken ships of approved quality from approved quarry including mixing and vibro compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth (if required providing plaster with cement mortar (1:4) wherever necessary without any extra cost) including rigid smooth centering and shuttering, scafolding, watering (excluding reinforcement bars) and curing for required period including cost of all material, labour, conveyance, royality, loading and unloading, sundries, tools and plants etc. complete as per the direction of the Engineer in Charge. |
| 6 | A) Column Base |
| 7 | A1) Plinth Beam |
| 8 | B) Column & beam |
| 9 | First Floor |
| 10 | E) Lintel |
| 11 | E1) Lintel First Floor |
| 12 | F) Chajja |
| 13 | F1) Chajja First Floor |
| 14 | H1) Roof Slab |
| 15 | First Floor |
| 16 | J) Stair Case Ground Floor |
| 17 | Supplying,Cutting ,straightening of steel HYSD (Fe- 500) conforming to (IS- 1786) withbending, binding, cranking, hooking, welding or jointing if necessary & tying the grills and placing in positionas required for the Rod work in all floors and & for providing fan hooks hosting lowering ,& laying steels including cost conveyance ,taxes & royalties of allmaterials and binding wires of 18 to 20 gauge & cost of all labourT&P required for the work etc. Complete in all respect as per the direction of Engineer in charges ( payment will be made on weight of MS rod or tor steel only basing on the co- efficient of MS rod or tor steel bars approvedby SAIL/ TATA/competent authority and (Noseparate payment will be made towards the cost of binding wires over lapping, wastage, coupling, welded, joints , spacer bars, ,chairs stays, hangers and annealed steel wires or other methods for binding and placing etc.).Engineer in Charge.Ground Floor |
| 18 | First Floor |
| 19 | Painting two coat with any approved paintincluding cost of labour and materials brusher, T&P required for the work etc. complete and as per direction of the Engineer-in -charge. |
| 20 | First Floor |
| 21 | Supplying, fitting, fixing up window (sliding type) made up aluminium section 9778 as window frameSection No.4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as pannel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes of labour, T&P etc. complete asper direction of E.I.C |
| 22 | Brick masonary with fly ash brick in cement mortar (1:6) in superstructure including cost,carriage roayalty taxes of all materas required for thework etc.complete |
| 23 | First Floor |
| 24 | Fly Ash Brick masonry with C.M. (1:6) in (F&P) using Fly Ash Bricks including watering and curing with cost, conveyance, royalty and all taxes of materials and labour(T&P) required for the work etc. complete. |
| 25 | RCC wok of M-20 grade with 20mm downgraded size hard granite chips including hoisting and layingincluding cost, conveyance and taxes etc. complete |
| 26 | Providing 12mm thick cement plaster in cm(1:6) on the rough surface/ plumbed surface of masonry racking out ofjoints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level and providing grooves as shown in the drawning including cost of all material, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants etc. complete as per the driection of the Engineer in Charge. Ground Floor |
| 27 | First Floor |
| 28 | Removing old lime or cement plaster from wall including racking out joints 12 mm deep and stacking the useful materials for reuse and removing the debris within 50m lead |
| 29 | 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment etc.complete |
| 30 | Providing 16mm thick cement plaster in cm (1:6) on the rough surface of masonry walls for all floors including racking and joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level and providing grooves as shown in the drawning including cost of all material, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants etc. complete as per the driection of the Engineer in Charge. Ground Floor |
| 31 | First Floor |
| 32 | Fixing Vetrified industrials floor tile of premium grade having thickness 8mm to 10mm confirming to IS 4457 of size (300mm x 300mm)in floorand in rises of steps on 25mm thick bed of cement plaster (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 33 | Fixing Vetrified industrials dados tile of premium grade having thickness 8mm to 10mm confirming to IS 4457 of size (300mm x 300mm)in floorand in rises of steps on 25mm thick bed of cement plaster (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 34 | 25mm damp proof course with cc (1:2:4) using 12mm size hard granite chips including hoisting and layingincluding cost, conveyance and taxes etc. complete |
| 35 | Providing supplying of black glass of 5mm thick (I:S:I) mark for fixing in window etc.complete |
| 36 | Labour of replaceing glass , pans including cutting to size with cost of nails putty etc.complete |
| 37 | Providing fitting fixing 110mm dia PVC rain water down pipes including cost of all materials labour tap etc completion all respects . |
| 38 | Supply fitting and fixing rain water down pipe 100mm dia supreme make PVC pipe fixed in wall with required lead, camp and nail etc complete. |
| 39 | RCC wok of M-20 grade with 20mm downgraded size hard granite chips including hoisting and layingincluding cost, conveyance and taxes etc. complete |
| 40 | Drain Wall |
| 41 | Drain Slab |
| 42 | Dismantling and removing cement concrete including stacking the useful materials for reuse andremovingthe debris within 50 m lead etc complete |
| 43 | Dismating Brick or Stone Masonary in lime or cement mortar above 3 M height including stacking the useful materials for reuse and removing the debris within 50m. Lead. |
| 44 | Aerated Autoclaved Fly ash bricks/masonry in filler/inside walls using A.A.C blocks of size 625mmx200mmx200mm having compressive strength not less than 4N/mm2 conforming to IS:2105 (Part-3)-2005 and IS:6441-1972 in cement mortar of mix (1:4) and screened and washed sand for mortar for use in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, royalty, loading, unloading of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. |
| 45 | Providing fitting and fixing up partition walling aluminum anodized sectionNO. 9210 and 9207 as single groove and double groove resepctively as horizontal and vertical member and section 4660 as Tapered clup and jointing angle No. 1855 etc as per direction of Engineer in charge. including cost of laminated board of standard type I.S.I. |
| 46 | Providing fitting fixing AIuminium door with OEL anodized AI door section of 9202 as vertical member 9201 as top member and 9200 as bottom and middle member and 6mmglass fixed in top portion, bottom portion fixed 12mm novapan board etc. complete (Revised A/R , item No. 10) |
| 47 | Dismating and removing 2.5 cm thick grading concrete from roof slab cleaning the surface including stacking the useful materials for reuse and removing the debris within 50m. Lead. |
| 48 | Second Floor |
| 49 | 4cmthick Grading Concrete (1:2:4)using 4.7mm size b.h.g.c.b. chips including watering, curing with cost, conveyance, taxes and cost of all labour (T&P) etc. complete as per Direction of Engineer-In-Charge. |
| 50 | Second Floor |
| 51 | 2.5cm thick grading concrete (1:2:2) on roof slab using 6mm size hard granite chips on new work including providing chicken mesh. |
| 52 | Providing supplying fitting and fixing of iron door made out of M.S. Angle, sheet flat as per approved desiginincluding cost,carriage royalty taxes of all materas required for thework etc.complete.M.S. Grill |
| 53 | M.S. Door |
| 54 | Supply fitting fixing of G.I pressed steel doors with polymeric power coated including cost of all fitting cost of all labour materials T & P etc complete |
| 55 | Painting two coats with any approved shade over a coat of primerincluding cost of labour and materials brusher, T&P required for the work etc. complete and as per direction of the Engineer-in -charge. |
| 56 | Fixing vertified tiles in floors,treads (600mm x 600mm) and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 57 | Brickwork with Fly Ash bricks in cement mortar (1:4) in superstrure including cost,carriage roayalty taxes of all materas required for the work etc.complete. |
| 58 | Providing and fixing Glazed Ceramic tiles in dados,skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 59 | Providing and fixing Granite tiles in dados,skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 60 | Supplying fitting fixing of 2\"-0\" wide Almirah made out up 19mm & 12mm BWR Ply & covered with 1mm Laminated (Sunmica) including Cromium coated handle 75mm with 125 x 25mm / 100mm with 150x25mm includingall fitting including cost of material all taxes, T&P etc complete as per direction of Engineer -in-charge |
| 61 | Cement washing one coat with any approved cementincluding cost,carriageof all materas required for thework etc.complete. |
| 62 | First Floor |
| 63 | Wall priming one coat with any approved wall cement primer (Water based)including cost of labour charges etc. complete |
| 64 | First Floor |
| 65 | Finishing wall surface with Cement based wall putty (water based) of approved make and finish smooth and even surface to receive painting including cost of all materials labour T&P etc complete. |
| 66 | Distermpering two coat with any approved shade , finished smooth including cost,carriageof all materas required for thework etc.complete. |
| 67 | First Floor |
| 68 | Wall painting two coats with weataher coat paint over a coat of primerof approved shade including cost of paint. |
| 69 | First Floor |
| 70 | Fixing Kotatiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 71 | Fixing Kotatilesin dados, skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 72 | Distermpering two coat with any approved shade , finished smooth including cost,carriageof all materas required for thework etc.complete. |
| 73 | First Floor |
| 74 | Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes ofall materials labour, T&P etc. required for the complete in all respect. |
| 75 | Providing supplying of following M.S. Squre hallow section, angle and flat etc for roof frame with all cost taxes etc complete |
| 76 | iron work wrough and put up in trusses and record racks for roof frame |
| 77 | Providing supplying fitting and fixing of Blue scope colour G.I. Sheet including cost carriage taxess etc complete. Head Room |
| 78 | Cost of J Hook |
| 79 | Wall painting two coats with weather coat paint over a coat of primer of approved shade including cost of paint |
| 80 | First Floor |
| 81 | Electrical Installation Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V piano type switch ISI marked and ceiling rose ISI marked mounted on MSbox having front bakelitecover of suitable size, MSbox with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/HPL)Group-A-L.P-F.P- C.B.P- |
| 82 | Group-B L.P- F.P- C.B.P- |
| 83 | Group-CL.P- F.P- C.B.P- |
| 84 | Supply and fixing of 5 Amp plug with switch on existing board (Piano type/cover including connection etc. as required ) |
| 85 | Supply and fixing of 3 nos of5 Amp plug with switch on 250mm x 200mm x 60mm 16/18 SWG Metal Boxon suitalbe size phenolic laminated plate complete in all respect |
| 86 | Supply and fixing of 15 Amp plug with switch on 150mm x 75mm x 60mm 16/18 SWG Metal Box on suitalbe size phenolic laminated plate complete in all respect |
| 87 | Supply and fixing of Electronic Step Type socket size fan regulator (Make-Cona/ Anchor/ Usha/Bajaj) |
| 88 | Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulatedsingle core multistrand copper conductoras earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL) 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia |
| 89 | 2 X 2.5 sq.mm +1 X 1.5 sq.mmin 20 mm dia |
| 90 | 4 X 6 sq.mm + 2 X 2.5 sq.mm in 32 mm dia |
| 91 | 2 X 4 sq.mm +1 X 1.5 sq.mm in 20 mm dia |
| 92 | Supply and fixing of following way Horizontal type TPN DB in recess , Conforms to IS 8623-1 & 3, IEC 61439-1 & 3, IK 09 protection rating double door DB, available in CRCA sheet steel, RAL 9003, powder coated, Ready to use DBs - Provided with 100A insulated phase bus-bars, neutral bar/s with shroud/s , earth bar/s . sticking saddles , cement spill protector , color-coded interconnecting wire set , cable ties , blanking plates and circuit identification labels With provision for FP MCB/Isolator/RCCB/RCBO as incomer and SP MCBs as outgoings(Make- L&T, Legrand) |
| 93 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.) |
| 94 | 8way, Double door |
| 95 | Supply and fixing of following rating 240 V/415 V \"C\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-HPL/ Havells/ Legrand /L&T/C&S) |
| 96 | DP MCB 6-32A C-series |
| 97 | FP MCB 6-32A C-series |
| 98 | Supply and fixing of 18watt Led batten polycarbonate body tube light, Luminousity: 100 lumens, Colour Temperature: 6500 Kelvin.(Make- Havells/ Philips/ Crompton/ HPL) |
| 99 | Supply and fixing ofA.C Ceiling fan 48\"\" size, Minimum Air delivery-210 cum/min, 340rpm , BEE 5 star rated (Make-Havells ES 50/ Crompton HS Plus) |
| 100 | Supply and fixing of Electronic Step Type socket size fan regulator (Make-Cona/ Anchor/ Usha/Bajaj) |
| 101 | Supply and fixing of 300mm Exhaust Fan, Motor Speed: 1400 RPM Metal Blade, Double ball bearings heavy duty motor, metal bird guard, Air delivery (minimum): 1850 m³/h,Noise level : 40-45 dB |
| 102 | 5/6 Amp switch |
| 103 | 3 pin 5/6 Amp socket outlet |
| 104 | Supply and fixing of 60 wattled streetlight Endura citylite platinum energy saving and environmental friendly long lige LED street light made up of pressure die cast alluminium housing with acrylic cover as diffuser with IP66 pretection and impact resistance of IK07 |
| 105 | Public Health Providing and fixing(UPVC) ASTM-D pipes conforming to IS:1585, having thermal stability for hot & cold water supply, including all UPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge25mm diaUPVC ASTM-D Pipes |
| 106 | 40mm diaUPVC ASTM-D Pipes |
| 107 | 50mm diaUPVC ASTM-D Pipes |
| 108 | In first floor 25mm diaUPVC ASTM-D Pipes |
| 109 | 40mm diaUPVC ASTM-D Pipes |
| 110 | 50mm diaUPVC ASTM-D Pipes |
| 111 | Supplying all materials,labour,T&P and cutting holes through existing brick work including making good the damages in cement mortar(1:4) for taking GI pipes and fittings/PVC pipes and fittings etc.all complete as per PH specification and direction of the Engineer-in-charge. |
| 112 | 250mm thick wall |
| 113 | Supplying all materials , labour, T&P and cutting grooves in pucca floors and walls for taking P.V.C pipes and G.I fittings etc. and making good the damagesincluding finishing complete as per P.H. specification and direction of Engineer-in-charge. |
| 114 | In first floor |
| 115 | Supplying all materials , labour, T&P and fitting and fixing brass/CP fittings of following nominal bore with supply of all jointing materialscomplete as per P.H. specification and direction of Engineer-in-charge.15mm dia C.P Long body Bib cock(Jaquar)CON-CHR-107KN |
| 116 | 15mm C.P.Pillar cock(Cat.no-KUB-MCH-35001F)Jaquar. |
| 117 | 15mm dia CP Concealed Stop cock(Plaza make) |
| 118 | 15mm dia CP Angle Stop cock(Jaquar)CON-CHR-053KN |
| 119 | 40mm dia brass fullway valve(Shakti Make) |
| 120 | 50mm dia brass fullway valve(Shakti Make) |
| 121 | 15mm dia CP Two way Bib cock(Jaquar)CON-CHR-041KN |
| 122 | 15mm dia. C.Pextension piece |
| 123 | 15mm dia. C.P flange |
| 124 | 125mm dia CP gratting |
| 125 | 15mmdia CP health faucet(ALD-CHR-573)Jquar. |
| 126 | Supplying all materials ,labour ,T&P and fitting and fixing CP shower with 15mm or 20mm inlet including polishingetc.all complete as perspecification and direction of Engineer-in-charge |
| 127 | Supplying all materials ,labour ,T&P and fixing 10 litres capacity PVC low level flushing cistern with a pair of PVC brackets complete with fittings such as pvc siphonic arrangements, 15mm dia nominal size pvc ball valve with polythene float ,pvchandles, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet , and connecting the inlet pipe with supply mainetc.all complete as perspecification and direction of Engineer-in-charge |
| 128 | Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 2.60m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge.( Sintex/Supreem/Rotomax) |
| 129 | 2000 ltrs capacity rotational moulded polyethylene cylindrical vertical water storage tank . |
| 130 | Supplying all materials,labour,T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No.13592/1992 to walls with nails,bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification,testing,earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of Engineer-in-charge |
| 131 | 110mm dia U-PVC Door Tee |
| 132 | 110mm dia U-PVC Plain Band |
| 133 | 110mm dia U-PVC Plain Tee |
| 134 | 110mm dia U-PVC Offset without ear |
| 135 | 110mm dia U-PVC Plain Shoe Bend |
| 136 | 110mm dia U-PVC Door Cross Tee |
| 137 | 110mm dia U-PVC Door Bend |
| 138 | 110mm dia U-PVC \"P\"Trap |
| 139 | 110mm dia U-PVC Cowl |
| 140 | 110mm dia U-PVC Socket plain |
| 141 | Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC / HCI pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 142 | Supplying all materials , labour, T&P and cutting by chiselling in brick masonry wall for fixing HCI or U-PVC pipe and fittings of following nominal bore including making good the same with brick work in cement mortar 1:3 including plasteringetc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 143 | Supplying all materials , labour, T&P andfixing Vitreous chinawater closet ,squattingpan ( Indian type W.C. pan / Orissa pattern squatting pan ) duly embedded in cement concrete 1:5:10 using hard granite metal 4cm nominal sizeincluding fixing a pair of vitreous china 250mmx130mmx30mm foot rest, fixing 100mm dia hci \"P\" or \"S\" trap for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 144 | Supplying all materials,labour,T&P and fitting and fixingvitrous Chaina washed down water Closet (European type water closet - EWC) with integral \"P\" or \"S\" type trap to the floor including wodden plug and chromoum plated screw including jointing the trap with soil pipe in CM(1:1) fixing plastic seat cover for washed down water closet with crmium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of Engineer-in-charge. |
| 145 | Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge |
| 146 | Supplying all materials ,labour ,T&P andfixing Wash basin with hole for pillar taps with cast iron or MS brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. fixing pedestralfor wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin , fixing 12mm dia CP brass waste etc.all complete as perspecification and direction of Engineer-in-charge. |
| 147 | Supplying all materials ,labour ,T&P and fixing wash kitchen sinkwith outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CPbrass waste , fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc. including cutting holes in walls and making good the damages etc.all complete as perspecification and direction of Engineer-in-charge |
| 148 | Supplying all materials,labour,T&P and Bowl pattern urinal of the following sizes including connecting the urinal with 32mm dia PVC waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia cp dome west,15mm dia cp spreaderincluding cutting holes in wall and making good the damages with supply of wooden plugs,screws and cement etc. all complete as per specification and direction of the Engineer-in-charge. |
| 149 | Supplying all materials,labour,T&P and fixing vitreous china squatting plate of following sizes with integral longitudinal flushing pipe including cutting the floor and mending good the damages embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete(1:5:10) using 40mm hard granite metal, including 6 mm thick white cement finishing at the top of the urinal foot plate etc. all complete as per specification and direction of the Engineer-in-charge. |
| 150 | Supplying all materials ,labour ,T&P andfixing Mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washers etc.all complete as perspecification and direction of Engineer-in-charge |
| 151 | Supplying all materials,labour,T&P and fixing standard sized Glass-shelf with C.P brass bracket and guard rail complete fixed to wooden pluges with screw etc.all complete as per specification and direction of Engineer-in-charge. |
| 152 | Supplying all materials ,labour ,T&P andfixing standard sizedCP brass towel rail completewith CPbrass brackets fixed to wooden plugs with chromium plated brass screws etc.all complete as perspecification and direction of Engineer-in-charge |
| 153 | C P TowelRing |
| 154 | Supplying all materials ,labour ,T&P andfixing CP Soap Holder complete with CP brass bracketsfixed to wooden plugs with chromium plated brass screws etc.all complete as perspecification and direction of Engineer-in-charge |
| 155 | Supplying all materials ,labour ,T&P and dismentaling of old and damaged squatting pan (Orissa pan)etc.all complete as perspecification and direction of Engineer-in-charge. |
| 156 | Dismantling and removing old tiled flooring including removing the old base and stacking the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the Engineer in charge |
| 157 | Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep, stacking the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the Engineer in charge |
| 158 | Supplying all materials,labour,T&P and dismantling the damaged European water closet or Anglo Indian water closet and removing the debris at a safe distance as per direction of the Engineer in charge |
| 159 | Supplying all materials, labour, T&P and dismantling HCI pipes and fittings as per direction of the Engineer in charge |
| 160 | 100mm dia HCI pipes and fittings |
| 161 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 162 | In first floor |
| 163 | Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge |
| 164 | In first floor |
| 165 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 166 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 167 | In first floor |
| 168 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge (ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 30cmx30cm Kajaria/Somany/Johnson/Orient bell special printed seriesto be pre-approved by the Engineer-in-charge) |
| 169 | In first floor |
| 170 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 45cmx30cmKajaria/Somany/Johnson/Orient bell to be pre-approved by the Engineer-in-charge ) |
| 171 | In first floor |
| 172 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge |
| 173 | Supplying all materials ,labour ,T&P and constructing Man Hole Chamber ofinside size 910mmx910mmx910mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken black hard granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing, conveyance of all materials to worksite, payment of royalty, taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge |
| 174 | Supplying all materials, labour, T&P & constructing Soak Way Pit of the following size with dry brick walling from bottom upto invert of inlet pipe andKB brick work in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size crusher broken hard black granite metal on bed, 12mm thick cement plaster in cement mortar (1:4) inside and outside over masonry brick work, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips fitted with iron lifting handles including earth work in open well excavation in all kinds of soil and refilling of cavity around the pit and painting the iron works, watering, curing,cost of all materials,conveyance of all materials to worksite, payment of royalty, all taxes etc. all complete as per approved drawing,PH specification and direction of the Engineer-in- charge. |
| 175 | Supplying all materials,labour,T&P and laying in trenches ( to level or slope ) unplasticized PVC pipe conforming to IS:4985/2000 of the following outside dia for class-3 (0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/ as per manufactures\"s providing and laying in trench cement concrete(1:4:8) with 40 mm size hard granite metal in the Type-C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer-in-charge. |
| 176 | Supplying all materials, labour,T&P and Re-constructing Man hole chamber of the following size with cement concrete(1:3:6)using 40mm size hard granite metal on bed,1st class K.B brickwork in cement mortar(1:6)moulding and shaping the channel inside and benching with cement concrete(1:2:4)using 12mm size h.g chips,12mm thick cement plaster(1:3)to out side ,R.C.C Cover slab in (1:2:4)using 12mm size h.g chips with RCC man hole cover,earth in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per approved specification and direction of the Engineer in charge. |
| 177 | Providing and fixing factory made Rajshri PVC door frame of size 50x47mm with a wall thickness of 5mm,made out of extruded 5mm rigid PVC foam sheet,mitered at corners and joined with 2 Nos.of 150mm long brackets of 15x15mm M.S.square tube, the vertical door profiles to be reinforced with 19x19mm M.S.square tube of 19 gauge, The door frame to be fixed to the wall using M.S.screws of 65/100mm size comple & 30mm thick factory made Solid both sixe pre-laminated panel pvc door shutter consisting of prame made out of M.S.Tube of 19 gauge thickness and size 19x19mm for style and 15x15mm for top & bottom rails,M.S.frame shall have a coat of steel primers of approved make and manufacture,M.S.frame covered with 5mm thick heat molded pre-laminated PVC \"C\" channel of size 30mm thickness,70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming style, and 5mm thick 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sided to form lock rail. Top bottom and lock rail shall be provided either side of the panel,10mm(5mmx2mm)thick,20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail paneling of 5mmthick both side pre-laminated PVC sheet to be fitted in the M.S.Frame welded/sealed to the styles & rails with 7mm(5mmx2mm)thickx15mm wide PVC sheet beading on inner side and joint complete with cost of all materials,labour,sundries(S.S.Hinges 100mm,S.S.Tower bolt 150mm,S.S.Handle 150mm) T&P etc.required for the work as per the direction of the Engineer-in-charge. |
AI Tender Summary
Tender Timeline
Jan 17, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 01, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 02, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender