|
| 1 | PART A : PLATFORM |
| 2 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches ordrains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 3 | Supplying and filling in plinth with Jamuna sand under floors including, watering, ramming consolidating and dressing complete. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: ( 1 Cement: 4fine sand : 8 graded stone aggregate 40 mm nominal size) |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work : 40 mm nominal outer dia Pipes. |
| 7 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall : 40 mm nominal outer dia Pipes |
| 8 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. : 32 mm nominal outer dia Pipes . |
| 9 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. : 15 mm nominal outer dia Pipes . |
| 10 | Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore , 86 mm long, weighing not less than 88 gms |
| 11 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore . |
| 12 | Providing and fixing 1st quality ceramic glazed walltiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting , risers of steps and dados, over 12 mm thick bed of cement mortar 1: 3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 13 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. |
| 14 | Structurat Steel work in single section , fixed with or without connecting plate, including cutting, hoisting , fixing in position and applying a priming coat of approved steel primer all complete. |
| 15 | Construction of half brick masonary open surface drain withcommon burnt clay FPS (non modular) bricks of class designation 5.00in cement mortar 1: 6 (1 cement : 6 coarse sand) , 150 mm wide and 200 mm average depth laid over 100 mm thick and 550 mm wide P.C.C. 1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggragate 40 mm nominal size) with 40 mm thick cement concrete flooring and 12 mm thick cement plaster 1 : 4 (1 cement : 4 fine sand) withneat cement punning on exposed surface of drain including earthwork , all complete, as per Clause No.19.6 of CPWD Specification 2019 and direction of EIC. |
| 16 | PART B: STAGING OF WATER TANK |
| 17 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means infoundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.2.8.1 All kinds of soil. |
| 18 | Supplying and filling in plinth with sand under floors, including watering,ramming, consolidating and dressing complete. Cum |
| 19 | 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size) |
| 20 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) |
| 21 | Structural steel work in tuber framed work including cutting , welding, fixing in position all complete as per instruction of EIC(scrap drilling rods to be supplied by department). |
| 22 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer all complete. |
| 23 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 24 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 13.61.1 Two or more coats on new work |
| 25 | PART C: DRILLING PORTION |
| 26 | Drilling in all kinds of soil and rockwith DTH rig Machinefor installation of hand pump all complete including supplying all materials,labour,tools drilling rigs, air compressor and equipment as well as fuel lubricants for making 125/115 mm dia boring and cost of transportingrig machine and other vehicles up to site of work as per specification and direction of EIC. |
| 27 | Supplying all materials labour,equipments for lowering 125 mm dia blue UPVC Pipes as casting for protecting the sides from falling during the process of drilling all complete including carriage to work site. |
| 28 | Supplying labour, cementand calcium chloride or bentonite solution and equipments for groutingthe casing pipe after lowering in the bore including carriage of materials to work site etc.all complete as per Specification and direction direction of EIC. |
| 29 | Supplying all tools,equipments and labour and doing washing, flushing and development of drilled tube well to give clean and clear water all complete as per direction of EIC |
| 30 | Supplying all tools,labour for fitting and fixing deep well cylinder with necessary connecting rod complete jobas per specification & direction of E/I. including carriage of materials. |
| 31 | Providing & Fixing of good quality , standard make 32 mm dia PVCPipe in3 meters length suitable for hand pumps as per the direction of EIC. |
| 32 | Cost of 125 mm dia.Blue UPVC casing Pipe confirming to ISI latest revision is 12818/2016 CML No.5543459 |
| 33 | Supplying all materials,labours and fixingIndia mark II Hand pump with all accessories all complete jobas per direction of E/I including carriage of materials. |
| 34 | Cost of 1 No.of standard ISI Marked deep wellHand pump for India Mark II confirming to ISI 15500(part2)/2004with latest revisionincluding 12mm x3 Mtr long8 Nos. of connecting rod.made of bright bar electro-galvanised fitted with coupler & normal stand assembly suitable for bore well dia 100 to 125 mm casing pipe. |
| 35 | Construction soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diametre and 1.20 m long complete as per standard design. |
| 36 | Writing Name & Scheme of Installation on Hand Pump as per direction of EIC. |
| 37 | PART D: SOLAR SUBMERSIBLE PUMP |
| 38 | Provision and installation of solar powered submersible Autorun & stop DC Pump Motor (900Wp) of stainless steel suitable for minimum 125mmx115mm bore well operating head 60.00 M discharge rate minimum 2000 lph with loweningup to 57.000m Suitable dia HDPE pipe & 2.5 sq mm X 3 core flat submersible cable of IS 694:1190 lncluding monol/poly crystalline PVC array (900Wp) Mounted on steel structure for storage water tank (5.00m) height in a suitable direction to to optimize panel uses and withstand the wind pressureup to 200km/h & making suitable arrangements to operated Hand pump manually in the same borewhen there is no salar power including 5 years warranty againstdefect in materials and workmanship with locking arrangement of switch boardthe system should be ECO friendly. |
| 39 | Total impact of GST for the purpose of CTC |
