Repairs To Joinery, Flooring, Roof Treatment, Sanitary Fittings And Other B / R Works At Area B Af Stn Wadsar
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Feb 2022
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
wadsar → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairs To Joinery, Flooring, Roof Treatment, Sanitary Fittings And Other B / R Works At Area B Af Stn Wadsar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-Feb-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 10-Feb-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters (with out taking off shutters from the frame) n. exc. 1.5 Sqm each complete all as specified and as directed. |
| 2 | Taking down chowkhats or frames with shutters (with out taking off shutters from the frame) exc. 1.5 Sqm but n. exc. 4.0 Sqm each complete all as specified and as directed. |
| 3 | Taking down shutters of any description exc. 1.0 Sqm and n. exc. 2.0 Sqm each complete all as specified and as directed. |
| 4 | Taking down and refixing shutters of any description not exceeding 1.0 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete all as specified and as directed. |
| 5 | S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete all as specified and as directed. |
| 6 | S&F framed work as in door frames or gates chowkats of angle or other section with braces, etc., complete, drilled or welded for MS hinges for fixing of gate or doors other covering andalso fastening and fixing complete all as specified and as directed. |
| 7 | S&F factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel designed with 2 mm thick moulded PVC sheet on front face and 4mm plain colour PVC sheet on back face as per specification and drawing complete all as specified and as directed. |
| 8 | S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part - II 2020 and as directed by GE/ Engineer-in-Charge. |
| 9 | M&L for 30mm thick 2nd class hardwood glazed and skeleton shutter open rebeted and prepared to receive glass gauze etc (with shash bar) edges of framing plain chamfered or rounded filled with cut and mitered beads for securing, glass etc size of member of shutter as per specified in SSR Part-I section 8, clause 8.24(a) supplyed and fitted to chowkats and directed by Engr-in-Charge. |
| 10 | M&L for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, kiln seasoned and chemically pressed treated and all as specified and as directed by Engineer-in-Charge. |
| 11 | S&F prelaminated particle board 25mm thick exterior grade pre laminated both sides with decorative choice lamination and fixed with screws to cupboard shutters and fixed to shelves and all as specified and as directed by Engineer-in-Charge. |
| 12 | S&F aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92mm x 31.75mm x 1.50mm, bottom size 92mm x 31.75mm x 1.50mm and shutter top & bottom of size 40mm x 18mm x 1.50mm and sides (handle) of size 40mm x 18mm x 1.50mm and lock side shutter frame of size 40mm x 18mm x 1.50mm with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 4.0 mm thick glass with necessary rubber beading gasket etc complete all as specified and as directed by Engr-in-Charge. |
| 13 | S&F aluminium ventilator powder coated (requried colour to match window colour), louvers type, frame top & bottom of size 31mm x 42mm x 1.50mm (rectangular tub of size 40mm x 20 x 2mm (and middle vertical of size 42mm x 46.20mm x 1.50mm Section and clip for fixing wire mesh and glass of size 19mm x 17.30mm x 0.90mm thick including stainless steel wire cloth 0.36mm nomonal dia of wire and 1.40 mm average width of aperture and fixed with stainless steel wire staples and supply and fixing 4.0 mm thick glass louvers with blades of 100mm heavy duty with necessary rubber beading, gasket etc complete all as specified and as directed by Engineer-in-Charge. |
| 14 | S&F aluminium powder coated (requried colour to match window colour) grill of 5.0mm dia squares rectangular triangular circular shape aperture n. exc. 7.00 cm in length or width fixed with H or F channel of décor or equivalent complete all as specified and as directed. |
| 15 | S&F aluminium doors, powder coated (of approved colour), with frame of section 100mm x 44mm x 1.50 mm thick and shutter with bottom rail of section 150mm x 44.5mm x 1.50mm thick, middle rail of section 85mm x 44.5mm x 1.50mm thick and top rail of section 80.4mm x 44.5mm x 1.50mm thick and styles of section 80.4mm x 44.5mm x 1.50mm thick with 4.0mm thick glass (plain/ tinted/ with laminated film) or prelaminated board fixed in position with aluminium beading including necessary rubber gaskets and 2 Nos. aluminium push plate handle of aluminium section 150mm wide and 1.50mm thick including 150mm aluminium tower bolt, brass mortice lock complete all as per Drawing No. CEAA/TD/63 sheet No. 2.2 complete all as specified and as directed. |
| 16 | S&F aluminium partition made with aluminium anodised section 62.30mm x 44.45mm x 1.50mm fixed in wall including provision for receiving glass pane etc and fixing the same with aluminium anodised beading and rubber gasket including 5.0mm thick glass (black/ tinted/ plain) and all necessary fittings complete as in partition all as specified and as directed. |
| 17 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid and bedded on pointed on any mortar complete all as specified and as directed. |
| 18 | M&L 15-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform sand like in cement mortar (1:4) including moulding and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and as directed. |
| 19 | M&L for single piece of green marble slab 15-18 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of Marble slab including moulding, cutting and polishing and nosing and polishing of the free or front edge of the slab window cills etc and including 15mm thick backing coat in CM (1:4) complete all as specified and directed in Engineer-in-Charge. |
| 20 | S&F 100 mm long SS butt hinges and fixed to frame with scrwewd or welding/ gas welding complete all as specified and as directed. |
| 21 | S&F 100mm butt hinges medium weight cold rolled mild steel complete all as specified and as directed. |
| 22 | S&F 150mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 23 | S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 250mm complete all as specified and as directed by Engineer-in-Charge. |
| 24 | S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engineer-in-Charge. |
| 25 | S&F 150mm long floor door stopper of aluminium body and tongue, with hard drawn steel spring, fixed to bottom of door shutter complete all as specified and as directed. |
| 26 | M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 27 | M&L for preparation of new steel surface of any description over 10cm width or grith not otherwise described and applying two coats of synthetic enamel paint over a coat of zink chromate primer complete all as specified and as directed. |
| 28 | S&F in repairs sheet glass (plain/ frosted) 4.0mm thick ordinary quality fixed with wooden beadings/ oil putty in squares n. exc. 0.5 Sqm in each pane complete all as specified and as directed. |
| 29 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or teak wood beading for wooden doors etc. complete all as specified and as directed. |
| 30 | All as per Item No. 29 above but fixed in repair to aluminium door/ sliding windows, aluminium ventilators, wooden wire mesh doors, PVC wire mesh doors includingbeading, packing etc all as specified and as directed by Engineer-in-Charge. |
| 31 | S&F in repairs auminium die cast body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed suatable for shutter complete all as specified and as directed. |
| 32 | S&F in repairs 300mm mild steel ordinary rat tail/ helical spring including roller, roller plate complete with provision of fixing in wooden, welded to pressed steel or angle iron frame complete all as specified and as directed. |
| 33 | S&F in repairs prelaminated particle board 12mm thick exterior grade pre laminated both sides with decorative choice lamination and fixed with screws to aluminium frame work for partion and kitchen cabinates etc. complete all as specified and as directed. |
| 34 | S&F in repairs for PVC kitchen cabinets made withdoor frame of size 48mm x 40mm (Section code RUPS-414), shutter frame 45mm x 300mm (section code DWUF-501) and20mm thick shutter (section code SPUF-128 or SPUF-129) and including 75mm size stainless steel butt hinges complete all as specified and as directed by Engineer-in-Charge. |
| 35 | S&F in repairs 25mm dia stainless steel drapery rod with and including two Nos. of bracket/ holders suitable for drapery 25mm dia rods of one window/ door openings etc of Allishan-Ivory pearl interior series complete all as specified and as directed. |
| 36 | Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permices complete all as specified and as directed. |
| 37 | M&L 25mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in levelling course complete all as specified and as directed. |
| 38 | M&L for 15mm thick screed bed or bedding layer of morter for laying floor finishes CM (1:6) complete all as specified and as directed. |
| 39 | M&L for endura glazed tiles 10mm thick light/ dark shade (square) area of each tiles 300mm x 300mm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 40 | M&L for vitrified ceramic tiles 10mm thick dark shade (square/ rectangular) polished area of each tiles not exceeding 0.36 Sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 41 | All as per Item No. 40 above but as in skirting complete all as specified and as directed. |
| 42 | M&L for non skid ceramic coloured joint free tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 43 | M&L glazed ceramic coloured digitaltiles 450mm x 300mm x 7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat of CM (1:4) complete all as specified and as directed. |
| 44 | Demolition of wall of brick and stone wall built in cement mortor incl all quoins, archs, pillars, etc complete all as specified and as directed. |
| 45 | M&L for brick work sub class \"B\" bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed. |
| 46 | M&L for half brick work sub class \"B\" bricks, straight or curved on plan to any radius built in half brick thick walls built in CM (1:4) complete all as specified and as directed. |
| 47 | Taking dawn cement or cement lime plaster any description on brick or stone wall/ celling including raking out joint, haking for key scrubing with water etc. complete all as specified and as directed. |
| 48 | M&L for rendering 15mm thick on fair faces of concrete or block masonary CM (1:6) finished even and smooth (without using extra cement) in internal surface of wall complete all as specified and as directed. |
| 49 | M&L for rendering 10mm thick CM (1:6) and setting coat 5mm thick CM (1:4) mixed with WPC in external surface of wall including scaffolding complete all as specified and as directed. |
| 50 | M&L for rendering 5mm thick in ceiling surfaces CM (1:4) complete all as specified and as directed. |
| 51 | M&L for preparation ofnew plastered surface of wall and applying two coats of distemper oil emulsion over a coat of primer over a sufficent coat of birla wall care putty complete all as specified and as directed. |
| 52 | M&L for preparation of new surfaces of wall and applying two coats of cement base paint complete all as specified and as directed. |
| 53 | M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed. |
| 54 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15cm thickness (below or above GL) complete all as specified and as directed. |
| 55 | M&L for 75mm thick cement concrete (1:2:4) type B2 (using 40mm graded stone aggregates) as in plinth protection and finishing cement concrete surface even and fair with brooming and every 2 mtr constrction joint to be provided and filled with bitumen with saw dust complete all as secified and as directed. |
| 56 | M&L for providing 75mm thick cement concrete (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base complete all as specified and as directed. |
| 57 | M&L for machine pressed precast conctete interlocking paver block of any shape and size with grey cement and pigment conforming to IS : 15658-2006 of 60 mm thickness, M-35 Grade over sand cushion complete all as specified and as directed.Note:- Sand will be measured and paid separately. |
| 58 | M&L for 25mm thick sand filling (sand cushioning) under path for laying interlocking tiles complete all as specified and as directed. |
| 59 | M&L for water proofing treatment in WC & bathrooms by applying cement slurry mixed with water proofing chemicals as per manufacturer\"s specifications of approved make as under:-(a) All corners of WC, bath shall be rounded by providing fillet of dia 75mm.(b) 15mm thick rendering on floor in CM (1:3).(c) Applying cement slurry @ 0.488 Kg/ Sqm.(d) 200 micron thick polethene film of approved make with approved adhesive.(e) Including demolition of lean concrete in sunken floor and refilling of lean concrete (1:5:10). |
| 60 | Taking up or down 15mm dia steel tubing and connection including cleaning for refixing or removal to store complete all as specified and as directed. |
| 61 | All as per Item No. 60 above but 20mm dia. |
| 62 | S&F 15mm dia steel tubing medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed. |
| 63 | All as per Item No. 62 above but 20mm dia. |
| 64 | Re-fixing old 15mm dia bore steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, reducer, etc as required complete all as specified and as directed. |
| 65 | Re-fixing old 20mm dia bore steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, reducer, etc. as required complete all as specified and as directed. |
| 66 | S&F in repair fancy type CP bib taps 15mm dia, chromium plated cast copper alloy with half turn type capstan heads, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 67 | S&F in repair fancy type CP stop/ angular cock 15mm dia cast copper alloy, chromium plated fency type screwed down high pressure with half turn type capstan heads, screwed both end for iron pipe or for unions and fixed complete all as specified and as directed. |
| 68 | S&F in repair 75mm dia outlet CI nahani trap plain with SS grating including jointing with solvent cement complete all as specified and as directed. |
| 69 | S&F in repairs 15 mm dia pillar tapes, fancy type, chromoum platedbrass with half turn type capstan heads screwed down high pressure, with or without lettered hot and cold with long shank, screwed shanks and fly nuts, screwed for iron pipes or for WHB complete all as specified and as directed. |
| 70 | S&F in repairs waste coupling of 32mm dia brass CP for glazed ware sink basins, etc. with long screwed shanks and fly nuts fanges end bedded in red lead cement and other end fixed complete all as specified and as directed. |
| 71 | S&F in repair 125mm dia fancy type CP shower rose complete all as specified and as directed by Engineer-in-Charge. |
| 72 | S&F in repair SS shop dish of size 100mm dia complete all as specified and directed by Engineer-in-Charge. |
| 73 | S&F in repair PVC water connection 450mm long to wash basin of 15mm dia including CP nuts and washers complete all as specified and as directed by Engineer-in-Charge. |
| 74 | S&F in repair vitreous china, white, wash down water closet pan (pedestal pattern) including fixing bolts, plastic seat cover with jet spray and including necessary flexible pipe connection and removing debris out side MD land complete all as specified and as directed. |
| 75 | S&F in repair vitreous china squatting pan \"Orissa\" pattern of size 580mm x 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connectingto \"P\" trap and to flushing pipe complete all as specified and as directed. |
| 76 | S&F in repair of low level flushing cystern 10 ltrs capacity body moulded from virgin quality high impact poly propoliyone and functional parts moulded from engneelicy grade ABS nylon and nylon glan complete including brackets and 15mm bore, 450mm long PVC connection complete all as specified and as directed. |
| 77 | S&F in repair 5.00mm thick 600mm x 450mm beveled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 78 | S&F in repair health faucet (ABS) with rubit cleaning system 1.05m long PVC flexible tube & ABS wall hook complete all as specified and as directed. |
| 79 | S&F stainless steel grating with or without hole of size 150mm complete all as specified and as directed. |
| 80 | S&F in repair plastic water closet seat cover to pedestal pattern pan with chromium plated hinges complete all as specified and as directed. |
| 81 | Dismantling of plain or corrugated asbestos cement/ polycarbonate, translucent (corrugated, semi-corrugated, plain etc.) sheets in roof coverings complete all as specified and as directed. |
| 82 | S&F 6mm thick multi wall polycarbonate plain sheeting as reqd colour fixed with coach screw/ machine rivets including all washer/ nut bolts etc. including aluminium angle 25mm x 25mm x 2mm thick around frames of free or front edges and strip top bottom section with rubber gasket of width 50mm for jointing /fixing of sheets as reqd including sacffolding of height 10-15 mtr and fixing as per manufracturer instructions complete all as specified and as directed. |
| 83 | Taking out existing unserviceable plaster, loose unsound weaken cement concrete of any description and in any position from existing surface of RCC roof sab/ RCC facia/ beams/ columns/ RCC chajja, average depth 25mm (approximate 6.5 mtrs height from natural GL) with power driven pneumatic chiesel and removal of debries upto a distence 500 mtrs out side MD land including saw cutting of all edges, making square shoulders of cavaties and roughening of smooth surface, scraping out and removing corrosion and all loose scales, rust etc from the visible reinforcement and cleaning the steel reinforecement properly providing NIT zink primer of approved make. Zink primer of on visible reinforcement surface to form a contineous film and preparing the surface to recive concrete of epoxy grouting mortar etc. including providing necessary scaffolding complete all as specified and as directed. |
| 84 | M&L for applying bonding coat of modified styrene butadene emulsion (SBR bonding agent of approved make) in proportion 1 Part (bonding agent) : 1 part (water) : 3 part (OP cement) by volume with the brushes etc to bind new cement plaster/ polymer modified plaster/ concrete / screed concrete with oldsurface including removal of loose/ distengrated old concrete/ plaster including preparation of surface etc. complete all as specified and as directed. |
| 85 | M&L for applying 18-25mm average thickness plaster on ceiling slab and chajja projections, facia and beams with polymer modified mortar, firtified with SBR, in proportion 1 part (cement) : 3 part (sand) by weight of cement with 11 to 15 ltrs water addition, finishing surface to match with existing adjoining surface complete all as specified and as directed. |
| 86 | M&L for treatment of soil under existing floors using emulsion @ 1 ltr per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar (1:2) (1 cement : 2 coars sand) to match the existing floors complete all as specified and as directed by Engr-in-Charge. |
| 87 | M&L for removal of plant growth by injection with chemical glyphospate solution (4% conceneration) of 20ml or till refuse by cutting or injection in stem of plants or roots at 30mm. The area shall then sprayed with solution 25ml glyphosphate (4% concent) diluted with 1 ltr of water. All roots/ plants shall be removed completely and making good the distrubed compound and painted with cement base or acrylic paint complete all as specified and as directed by Engr-in-Charge. |
| 88 | M&L for provision of false ceiling at height of 600mm x 600mm x 15mm mineral fibre ceiling tiles RH-99 of type micro looks edge laid on super fine XL 15mm expose d grid systems with 15mm wide T- section flanges. The frame work comprises of main runner of size 15mm x 32mm x 3000mm spaced at 1200mm centre securing fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers (GI wire of 3.0mm dia) to be fixed by approved roof plug, level adjusters and screws etc. The last hanger at the end of each main runner should not be greater than 450mm from the adjacent wall flush fitting 1200mm long cross tees of size 15mm x 26mm x 1200mm to be interloched between main runners at 600mm centers to form a 1200mm x 600mm module. Cut cross tees longer than that 600mm to be supported independently. 600mm x 600mm modules to be formed by fitting 600mm long flush fitting cross tees of size 15mm x 26mm x 600mm centrally between the 1200mm crosstees perimeter wall angle of size 19mm x 19mm x 3000mm secured to wall at 450mm maximum centres. Finally RH-99 mineral fibre tile 15mm thick micro look edge has to be laid on the 600mm x 600mm module complete all as specified and as directed by Engr-in-Charge. |
| 89 | S&F in repair PVC wall panelling plastic section for wall panelling having code set of 144 of size 250mm x 6mm fixed to wall including matching colour and material beading of suitable size complete all as specified and as directed. |
| 90 | S&F in repair false ceiling size of 600mm x 600mm x 15mm mineral fibre ceiling tiles RH-99 of type micro looks edge complete as as specified and as directed. |
| 91 | Removing of existing unserviceable water proofing treatment including PCC tiles (except PCC padding) taking down cement plaster etc, of any description and cleaning of top surface of cement concrete flushing out junction of parapet walls & washing down with water to remove all dirt etc including preparation of surfaces to receive new treatment and removing the rubbish off premises out side MD land complete as as specified and as directed. |
| 92 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed. |
| 93 | M&L for providing cement concrete (1:2:4) type B0 (using 12.50mm graded stone aggregates) laid to slope 1:30 in padding for WPT over roof slab complete all as specified and as directed by Engineer-in-Charge. |
| 94 | M&L for applying cold bituminous primer @ 0.30 Ltr/ Sqm conforming to IS 3384 laying APP polymer modified membrane 3.6 to 4.0 Kg/ Sqm in weight with non-woven polyster reinforcement (mineral gravel finish on upper side of the membrane) and sealing all overlaps of 100mm in length side and 150mm on width side of membrane by torching the same as per manufacture instruction and all as per specified particular specification and including 10mm thick rendering in CM (1:3) mixed with WPT 3% by weight of cement complete all as specified and as directed. |
| 95 | Supply only intergral water proofing compound complete all as specified and as directed. |
| 96 | M&L for removing the tank over roof and re-fixing in the same position including cleaning complete all as specified and as directed. |
| 97 | M&L for cleaning and removal of all scale, dirt, mud and any foreign material and removing accumulated silt etc from PVC tank and from mouth for circulating pipes of any dia etc. repairs to minor cracks stopping leaking of inlet/ outlet pipe by tightening of joints and alike and making joints leak proof of capacity of tank exceeding 250 Litres and not exceeding 1000 Litres complete all as specified and as directed by Engineer-in-Charge. |
| 98 | Taking dawn CI pipe 100mm/ 75mm of any description complete all as specified and as directed by Engineer-in-Charge. |
| 99 | S&F 100mm dia CI waste and vent pipes in any length with or without ears, fixed to wall complete all as specified and as directed by Engineer-in-Charge. |
| 100 | All as per Item No. 99 above but 75mm dia in floor. |
| 101 | S&F 100mm cast iron sanitary connection-short connection pipe of length upto 300-450mm socket to fit WC out-let etc. complete all as specified and as directed. |
| 102 | S&F 75mm cast iron sanitary connection-short connection pipe of length upto 300-450mm socket to fit WC out-let etc. complete all as specified and as directed. |
| 103 | S&F CI bends of any type radius diminishing pieces or tapes (large bore measured) of 75mm dia bore with oval access doors etc. complete all as specified and as directed. |
| 104 | S&F CI bend 100mm bore (any radius) dimnishing pieces or tapers with oval access doors etc. complete all as specified and as directed. |
| 105 | S&F CI branch pices single (equal and unequal) ordenary or incerted (spigot or socket type) or with parallel branch of 75mm dia complete all as specified and as directed. |
| 106 | S&F 100mm bore CI branch piece, single (equal or unequal ) ordinary or inverted (spigot or socket type) with parallel branches with oval access door etc. complete all as specified and as directed. |
| 107 | S&F CI cowls of 100mm complete all as specified and as directed. |
| 108 | Dismantling water tanks and exc. 250 but n. exc. 500 litre capacity complete all as specified and as directed. |
| 109 | S&F rotational moulded water storage tank 500 ltr capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed. |
| 110 | S&F in repair 15mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 111 | Dismantling water tanks and exc. 500 but n. exc. 1000 litre capacity complete all as specified and as directed. |
| 112 | S&F rotational moulded water storage tank 750ltr capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed. |
| 113 | S&F overhead tank PVC cover thread/ hinged type with suitable locking arrangement suitable upto 1000 Ltrs capacity complete all as specified and as directed. |
| 114 | S&F in repair 15mm dia (min weight 142 gms) PVC ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. |
| 115 | S&F in repair 20mm dia (min weight 210 gms) PVC ball valves high pressure of PTMT withepoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. |
| 116 | S&F in repair 10mm to 12mm thick tinted/ eatching toughen glass fixed with heavy duty stainless steel \"D\" type hook, handle, locking arrangement,auto door closer (suitable for 12mm thick glass) as in fixed type partition/ opening or in shelves and all necessary fittings complete as in partition complete all as specified and as directed. |
| 117 | S&F in repair stainless steel plate rack of size 750x600x250mm of approved make including taking down old wooden plate rack complete all as specified and as directed. |
| 118 | S&F in repair CP peg set of four as per sample kept in GE’s office complete all as specified and as directed. |
| 119 | S&F in repair CP center hole wash basin mixer cast copper alloy suitable for iron pipe 15mm bore complete all as specified and as directed. |
| 120 | S&F in repair, two way angle valve cock chromium plated fancy type bore 15mm complete all as specified and as directed. |
| 121 | S&F in repair sheet glass shelf assembly consisting of 5.0 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 122 | S&F in repair toilet paper holder chromium plated as per sample kept in GE’s office complete all as specified and as directed. |
| 123 | S&F in repair chromium plated towel rail 600mm long complete all as specified and as directed. |
| 124 | S&F MS framed works as in purline, rafters, column square/ rectangular, round or angle section, fixed with and including iron cleats or other connected plates flate iron wind ties etc including bending of MS section as requried such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 125 | S&F in repair pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge. |
| 126 | S&F 18mm thick marine plywood fixed with nails/ screws to frame work as in cabinets/ cupboards with SS angles cleats etc. complete all as specified and as directed. |
| 127 | All as per Item No. 126 but 6.0 mm thick complete all as specified and as directed. |
| 128 | S&F white laminates of 0.8mm thick glossy finish colour and pattern as approved adhesive complete all as specified and directed |
| 129 | S&F for decorative laminates of 1.0 mm thick glossy finish, colour and pattern as approved including adhesive complete all as specified and as directed. |
| 130 | S&F sliding of 5mm thick with hitching four corners with flowers and lines pattern as approved including SS two track sliding chennelwith rollers and accessories and fixed to kitchen cabinets complete all as specified and as directed. |
| 131 | S&F auto hydrolic spring stainless steel of 300-450 mm long for kitchen cabinets as per sample complete all as specified and as directed. |
| 132 | S&F stainless steel accessories grade 202 as mentioned below complete all as specified and as directed:- |
| 133 | (a) Plain basket of size 19\"\"x20\"\"x4\"\". |
| 134 | (b) Plain basket of size 19\"\"x20\"\"x6\"\". |
| 135 | (c) Plain basket of size 19\"\"x20\"\"x8\"\". |
| 136 | (d) Cutlery basket of size 19\"\"x20\"\"x4\"\". |
| 137 | (e) Cup and saucer basket of size 19\"\"x20\"\"x6\"\". |
| 138 | (f) Thali/ plates basket of size 19\"\"x20\"\"x8\"\". |
| 139 | (g) Glass baskets of size 19\"\"x20\"\"x4\"\". |
| 140 | (h) Bottle baskets size 19\"\"x20\"\"x6\"\". |
| 141 | (j) Partition baskets of size 19\"\"x20\"\"x8\"\". |
| 142 | S&F providing wall paper covering of any pattern design, motive or colour as approved complete all as specified and as directed. |
| 143 | S&F in repair 100mm long mortice latch with two lever (vertical type) brass body complete all as specified and as directed. |
| 144 | S&F continious (piano) hinges mild steel bright, mild steel bright finish or electrogalvansied (width of flaps (when open) is 30mm) complete all as specified and as directed. |
| 145 | S&F door seal strips strong rubber weather stripping door at bottom (standard length) complete all as specified and as directed. |
| 146 | S&F 10mm thick toughned glass corner including moulding/ beveling of edges of size 230mm complete all as specified and as directed. |
| 147 | S&F suspended gypsum board ceiling in steps including vertical/sloping members includes with GI perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter fixed in brick wall with mild steel screws & nylon plug at 610mm c/c, Then suspending GI Intermediate channels of size 45mm (0.9 mm thick with two flange of 15 mm each) from the soffits at 1220mm c/c with GI cleat and steel expansion fasteners. Ceiling section of 0.55mm thick having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to theintermediates channel with the help of connecting clip complete all as specified and as directed. |
| 148 | All as per Item No. 138 above but in vertical surfaces n. exc. 20 cm wide. |
| 149 | S&F 125mm wide POP cornices molding at junction of wall and ceiling with necessary adhesive and screw, as per sample kept in GE office complete all as specified and as directed. |
| 150 | All as per Item No. 140 above but 30 mm with POP molding complete all as specified and as directed. |
| 151 | M&L for cool tiles 7 to 8mm thick (square/ rectangular) having high solar reflectance materila with SRI < 94% area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
AI Tender Summary
Tender Timeline
Feb 03, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Feb 10, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedFeb 10, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 12, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender