Repair / Improvement To External Surface Finishes Using Mechanized Equipments At Certain Officer Md Accn And Otm Accns Under Ge ( East ) Lucknow- 1 Complete Removal Of Existing Treatment By Scrappingwith Wall Sander: ( Having Mechanical Vac, lucknow-Uttar Pradesh

Repair / Improvement To External Surface Finishes Using Mechanized Equipments At Certain Officer Md Accn And Otm Accns Under Ge ( East ) Lucknow- 1 Complete Removal Of Existing Treatment By Scrappingwith Wall Sander: ( Having Mechanical Vacuum Mechanism ) Or Equivalent Having Rpm Not Less Than 1500, Sanding Pad Of 80 Grit Having Dia Of 7 / 9 To Make The Surface Free From Dust, Loose Paint Etc. By Authorized Skilled Personcomplete All As Specified And Directed. 2 M&L Forcement Based Putty @ 1 Kg ( Undiluted ) Per Sqm Of Average Thickness 1 Mm, Over The Plastered / Old Painted Wall After Scrapping To Prepare The Surface Even And Smooth Complete Andsanding Of The Putty Surface With Machanical Wall Sander ( Having Mechancial Vaccum Mechanism ) Having Rpm Not Less Than 1500, Sanding Pad Of 240 Grit Or Above To Make The Surface Free From Dust Etc By Authorised Persen As Per The Following Steps :- Step 1 ) Mix The Putty Powder By Adding Water As Per ManufacturerS Specification And Mix It With Putty Mixerwith The Mixing Capacity Of Minimum 2.5 Kg Putty Per Minute. Step 2 ) Apply The First Coat Of The Prepared Mixer With The Help Of Fully Automatic Airless Spray Machine Of Putty Application Finishing The Surface Even And Smooth In Level Wihtout Ant Undulations.Step3 ) Allow 6-8 Hrs To Dry The Putty Surface.Note:- The Complete Execution Of Items And Machinary Used Shall Be As Per ManufacturerS Specification. However, The Min For Items No. 01, 02, 03 & 04 Criteria As Specified Above Have To Be Met. 3 M&L Forone Coat Of Acrylic Water Based Exterior Grade Primer @ 0.9 Ltr ( Undiluted ) / 10 Sqm Diluted With Water In 1:1 Ratio To Be Applied With Fully Automatic Airless Spray Machine Of Paint Application And Allow 6-8 Hrs To Dry The Surface For Painting Of Subsequent Quotes Complete All As Specified And Directed 4 M&L Forwater Based Premium Acrylic Smooth Exterior Emulsion Of Approved Colourwith Silicon Additive & Color Stay Technology, Excellent Dirt Pick Up Resistance Ofwith Low Voc Less Than 50, Antifungal / Algal Properties In Two Coats @ 1.79 Ltr ( Undiluted ) / 10 Sqm Diluted With Water As Per ManufacturerS Specification Applied Over Priming Coat With Fully Automatic Airless Spray Machinehaving An Electric Motor Of Min. 1 Hp With A Flow Speed Of Min 1 Ltr Per Minute Having A Pressure Of 3300 Psi And Allow 6-8 Hrs To Dry The Surface In Both Coats Of Paint Complete All As Specified And Directed. 5 Taking Down Cement Plaster Or Cement Lime Plaster On Pcc / Stone Surface / Brick Surfaces Including Taking Down Tiles Wherever Required Including Raking Out Joints Hacking For Key Scrubbing Down With Water Etc Complete All As Specified And Directed. 6 M&L For Rendering 15Mm Thick In Cement Mortar 1:4 On Fair Faces Of Brick Masonry Or Concrete Surfaces Of Walls, Chajja, Fins Facia Etc Upto 3 Story Height Mixed With Water Proofing Compound ( Isi Marked ) @ 3% By Weight Of Cement Or As Per Manufacturer’S Instructions, Finished Even And Fair Complete All As Specified And Directed. Note 1: - Supply Only Water Proofing Compound Shall Be Measured And Paid Separately Under Respective Item.2. Cost Of Scafolding For Rendering Is Included In This Item. 7 Supply Only Integral Water Proofing Compound ( Isi Marked ) Complete All As Specified And Directed. 8 Notes:- Applicable For Above Item No 1 To 4. The Work And The Rates Quoted By The Bidders Shall Include The Followings. ( A ) The Work Shall Be Executed By The Conctractoronly From Authorised Applicator Through Manufacturer Of That Materialsafter Approval By The Ge. ( B ) The Contractor Shall Upload With The Documents Under Cover-I Memoradum Of Understanding ( Mou ) With At Least One Of The Manufacturers Mentioned In The Contract, Failling Which The Bid Shall Be Laible To Be Rejected. 9 ( C ) Use Of Scaffolding, Trestles, Ladders, Cradles Etc Necessary For Execution Of Work As Protective Measures. ( D ) Work In Patches And In Narrow Widths, Bands, Cornices, Pilasters Etc And Cutting In Edge Of Line Where Necessary. ( E ) Spreading And Removing Covering Of Doors, Windows, Floors, Fittings Etc To Protect Them From Splashes. ( F ) Washing Floors, Cleaning Glass, Joinery, Electric Fittings, Wirings Etc. Drops And Splashes Of Paint To Be Cleaned. ( G ) Contractor Shall Be Summarily Responsible For Timely Execution Of The Work From Authorized Applicator Of Specified Manufacturer As Per The Manufacturers Instructions & Specifications And Desired Quality.

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	29-01-2022	Corrigendum 01	Date	10-02-2022
2	31-01-2022	Corrigendum 02	Technical Bid	10-02-2022

INR 1000 /-

INR 84.50 Lakhs /-