Construction Works Of 3 Nos Dining Hall In Schools Under Pbssm Under Bhangar-I Development Block Construction Works Of Dining Hall In Fulbari Fp School
Tender Value
4.56 Lakhs
Estimated cost
Bid Submission
20 Jan 2022
0 days left
EMD
9140
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhangar → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Works Of 3 Nos Dining Hall In Schools Under Pbssm Under Bhangar-I Development Block Construction Works Of Dining Hall In Fulbari Fp School
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. |
| 2 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by through saturation with water, ramming complete including the cost of supply of sand (payment to be made on measurement of finished quantity) |
| 3 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 4 | Supplying and laying brick khoa of ordinary bats of size (38 mm x 63 mm) of approved quality in 100 mm layer (loose) filling in gaps with small ones rammed and compact as directed true to level & grade. |
| 5 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(i) Pakur Variety |
| 6 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor.3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).Using grey cement (iii) 35 mm. thick |
| 7 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(i) Pakur Variety |
| 8 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 mI. SAIL/ TATA/RINL |
| 9 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing andstriking out after completion of works (upto roof of ground floor) (When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht.shall be allowed under 12 (e) for every 4 m or part thereof)(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. |
| 10 | 25 mm to 30 mm thick wooden shuttering as per decision & direction of EIC |
| 11 | Brick work with 1st class bricks in cement mortar (1:4) in foundation & plinth. |
| 12 | Brick work with 1st class bricks in cement mortar (1:6) in superstructure, ground floor. |
| 13 | 125 mm thick brick work with 1st class bricks in cement mortar (1:4) |
| 14 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:4 cement mortar(a) 20 mm thick plaster |
| 15 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:4 cement mortar(a) 15 mm thick plaster |
| 16 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m. |
| 17 | Supplying 1.50 mm thick MS sheet fitted and fixed on one or both faces of MS WI gate etc. with point welding in not more than 150 mm apart complete in all respect as per design including cost of all labour and material. |
| 18 | MS gate of jail type as per approved design made of strong MS frame work, intermediate stiffners and round / square bars or angles MS sheet (not less than 14 gauge) gussets, cleats, etc. |
| 19 | White washing including cleaning and smoothening surface thoroughly. One coat |
| 20 | Colour washing with any shade with stainers as required including cleaning and smoothning surface throughly.Internal surface (All floor)Two coats (on new work noly)Other than yellow and pink |
| 21 | Colour washing with any shade with stainers as required including cleaning and smoothning surface throughly.Internal surface (All floor)Two coats (on new work noly)Other than yellow and pink |
| 22 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 23 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface :(iv) Two coats (with any shade except white) |
| 24 | MS structural works in roof trusses with tubular sections conforming to IS:1161-1998 connected to another with brackets, gusset, cleats as per design, direction of EIC complete including cutting to requisite size, fabrication with necessary metal are welding conforming to IS : 816-1969 & IS :9595 using electrodes of approved make and brand conforming to IS :814-2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental charge such as elcetricity charge, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural tubular members as specified in relevant IS codde in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are consolidated for a height of erection 8m / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m beyond the initial 8m or part thereof.i) For trusses spanning upto 12.00m |
| 25 | Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm dia J or L , hook-bolts, limpet ans bitumen washers and putty compllete with 150mm end lap and one corrugation minimum side lap. (Payment to be made on the area of finished work)GCI sheet to be suppled by the contractor. (i) In Roof - b) With 0.63 mm thick sheet. |
| 26 | Galvanised iron sheet ridging fitted with necessary bolts, screws, washers, etc. complete (225 end lapping)450 mm lapping each waywith 0.63 mm sheet |
| 27 | Supplying, fitting and fixing glass reinforced polyster translucent fiber glass sheet to match with GCI corrugation as per IS : 12866-1989 in roof fitted and fixed with 10mm dia \"J\" or \"L\" hook, bolts and nuts, limpet and bitumen washers and putty with 150mm end lap and one corrugation minimum side lap complete.1.6 mm +/- 0.2 mm thick sheet (2.6 kg / sqm)Natural white or tinted blue colour. |
| 28 | Galvanised or painted wind-tie made of MS flats, fitted and fixed complete including cost of necessary fittings.Made with 50mm x 6mm flats. |
| 29 | Supplying, fitting, fixing chain link fencing of approved quality with RCC posts, wooden posts or iron posts by means of galvanised high \"c\" clips to grid of horizontal strands of galvanised high tensile spring steel wire of 12 SWG which have to be tensioned and fixed to the vertical posts by means of galvanised special clips, bolts and nuts, etc.25mm x 25mm x 12gm |
| 30 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. (A) UPVC Pipes: (ii) 110 mm. Dia. |
| 31 | UPVC Fittings Bend 87.5 degree110 mm dia |
| 32 | ADD GST(Goods and Services taxes) @ 12.00%(50% WB GST& 50% CENTRAL) over the above total [Marked as A] asper the rules of the Govt.of India…. |
| 33 | ADD for LABOUR WELL FARE CESS @ 1.00% |
AI Tender Summary
Tender Timeline
Jan 14, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJan 20, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 24, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender