Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #30715523

Repair Replacement Of B R Works And E M Work In Ra Zone B Area At Cad Pulgaon

Issued by Statutory Bodies & Commissions/Committees · pulgaon, Maharashtra
Tender Value
18 Lakhs
Estimated cost
Bid Submission
03 Feb 2022
0 days left
EMD
36000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
pulgaon → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Repair Replacement Of B R Works And E M Work In Ra Zone B Area At Cad Pulgaon

BOQ

Name of Work: REPAIR/ REPLACEMENT OF B&R WORKS AND E&M WORK IN RA ZONE \"B\" AREA AT CAD PULGAON
Sl. No. Item Description
1Dismantling timber scantlings under 40 sq. cmin section, in any position in fillets, rails, posts, rafters, purlins, etc. complete all as specified and as directed.
2S&F Rolled sectionsof Fe-410-W(Gde E-250) quality B as in main and cross beams, hip and jack rafters; purlins where connectedto common rafters and running rails and guides for sliding doors; fixedwithangle cleats or other connecting plates complete all as specified and as directed.
3Supply & Fixing Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts,if required: hooks (stay),heavy,for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securingpurlinstowood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165complete all as specified and as directed .
4M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto1.5m clear span,cills,steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering,slightly rounded or chamfered angles and throating, as directe incuding necessary formwork requiredcomplete all as specified and as directed .
5M&L for preparing new or previously untreated surfaces, of steel and iron work of any description not otherwise described exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
6Dismantling of corrugated or semi corrugated Asbestos Cement (AC) sheets in roof covering complete all as specified and as directed.
7S&F prepainted galvalume aluminum zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and as directed.
8S&F prepainted galvalume aluminum zink coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.
9M&L 8 mm thick designer ceiling board (Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instructions, fixed with white powder coatedgalvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33mm thick galvanized steel sheet & of size T 24x32mm and spaced at 1.2m c/c securelyfixed to the structural soffits by hangers at 1.2m of GI wire 4mm dia fixed pipe or wall plug, leveladjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runners at 600mm c/c to form 600x600mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19x19mm of white colour all as per instruction including dismantling of existing false ceilingcomplete all as specified & directed.
10Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
11M & L for Glazed ceramic coloured tiles of size 450 mm X 300 mm X 7 mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over 10 mm thick CM 1:4complete all as specified and directed
12M & L for Non skid ceramic coloured tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exc. 0.18sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over 15 mm thick screed bed (1:6) CMcomplete all as specified and as directed.
13S & F in repair Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partions as per sample. The over all size 900x600mm fixed with steel fastners or steel screw comp all as per sample . (Make : Nirali/Neel Kanth/jainco)
14M&L forBrick work with fly ash bricks straight or curved on plan exc 6m in radius but built in 1:6 cement mortar and including demolition of brick complete all as specified and as directed
15M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 onfinished even and smooth with out using extra cement complete all as specified and as directed.
16M&L for rendering 15 mm thick on fair faces of brick or concrete surfacesforCM 1:4 on finished even and smooth without using extra cement complete all as specified and as directed.
17M&L preparation ofplastered surfaces of wall and applying two coats of oil bound distemperon new plastered surfaces of wall and including one coat of white cement base wall care puttycomplete all as specified and as directed.
18M & L Preparing surfaces plastered orunplastered including preparation of new surfaces for two cement base paint over a coat of white cement primer and puttycomplete all as specified and as directed.
19M&L complete removal of existing treatment from plasteredwallsurfaces prepatory totwo coat of oil bound distemper over a coat of chalk whiting complete all as specified.
20M & L Preparing surfaces plastered orunplastered including preparation of old surfaces complete removal old exisisting treatment for two cement base paint over a coat of white cement primer complete all as specified and asdirected.
21M & L for preparation of Old painted steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and as directed.

AI Tender Summary

OUR REF NO 30715523
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 18 Lakhs
LAST DATE 03-02-2022
Authority
Authority Name Military Engineer Services
Work Description Repair Replacement Of B R Works And E M Work In Ra Zone B Area At Cad Pulgaon
Basic Detail
Tender No 8945/PUL/E8
Bidding Type Tender
Location
City pulgaon
State Maharashtra
Key Dates
Publish Date 14 Jan 2022
Submission Date 03 Feb 2022
Open Date 10 Feb 2022
Finance
Tender Value 18 Lakhs
Tender Fee 500
EMD 36000
Exemption Not Available
Document List
130602b6-bf77-4363-9687-0bd3ed1ada19.html
BOQ_560327.xls
TENDERDOCUMENTS8945.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jan 14, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Feb 03, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Feb 10, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

130602b6-bf77-4363-9687-0bd3ed1ada19.html

xls

BOQ_560327.xls

pdf

TENDERDOCUMENTS8945.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders