Educational and Research Institute Government Departments Closing in 0 days TDR #30714773

Supply, Testing, Installation Andcommissioning And Demonstration Of Tools And Equipment For Solar Technician ( Electrical ) And Pneumatic And Hydraulic For Fitter Trade At Govt. Industrial Training Institute, Jhargram Supply, Testing, Installation

Issued by Government Departments · jhargram, West Bengal
Tender Value
49.48 Lakhs
Estimated cost
Bid Submission
28 Jan 2022
0 days left
EMD
30000
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
jhargram → West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Supply, Testing, Installation Andcommissioning And Demonstration Of Tools And Equipment For Solar Technician ( Electrical ) And Pneumatic And Hydraulic For Fitter Trade At Govt. Industrial Training Institute, Jhargram Supply, Testing, Installation Andcommissioning And Demonstration Of Tools And Equipment For Solar Technician ( Electrical ) And Pneumatic And Hydraulic For Fitter Trade At Govt. Industrial Training Institute, Jhargram , Solar Technician ( Electrical ) And Pneumatic And Hydraulic For Fitter Trade , Measuring Steel Tape, 5 Meter , Combination Plier Insulated, 200 Mm , Screw Driver Insulated, 4Mm X 150 Mm, Diamond Head , Screw Driver Insulated, 6Mm X 150 Mm , Electrician Screw Driver Thin Stem Insulated Handle, 4Mm X 100 Mm , Heavy Duty Screw Driver Insulated, 5Mm X 200 Mm , Electrician Screw Driver Thin Stem Insulated Handle, 4Mm X 250 Mm , Punch Centre, 9Mm X 150 Mm , Knife Double Bladed Electrician, 100 Mm , Neon Tester, 500 V , Steel Rule Graduated Both In Metric And English Unit, 300 Mm With Precision Of 1 / 4Th Mm , Hammer, Cross Peen With Handle, 250 Grams , Electrical Symbol Andaccessories Charts, As Per Nimi Standard , Pipe Vice Cast Iron Withhardened Jaw Open Type, 100 Mm , Hand Vice, 50 Mm Jaw , Table Vice, 100 Mm Jaw , Hacksaw Frame ( With Blade ) , Adjustable 300 Mm Fixed 150 Mm , File Flat, 200 Mm 2Nd Cut With Handle , File Half Round, 200 Mm 2Nd Cut With Handle , File Round, 200 Mm 2Nd Cut With Handle , Pliers Long Nose Insulated, 150 Mm , Pliers Flat Nose Insulated, 200 Mm , Pliers, Round Nose Insulated, 100 Mm , D.E. Metric Spanner Doubleended, 6 - 32 Mm , Gauge, Wire Imperial Stainlees Steel Marked In Swg & Mm, Wire Gauge - Metric , Portable Electric Drill Machine, 0-12 Mm Capacity750w, 240V With Chuck & Key And Twist Drill Bit ( 2, 3, 4, 5, 6, 10Mm ) , Crimping Tool, 1.5 Sqmm To 16 Sq Mm 16 Sq Mm To 95 Sq Mm , Pliers Side Cutting, 150 Mm , Wire Stripper Adjustable Length, 200Mm , Stripping Capacity ( 0.2 - 6.0 Sq Mm ) , Hammer, Ball Peen With Handle, 250 Grams , Scriber ( Knurled Centre Position ) , 200Mm , Tool Kit Box / Bag Portable, L- 450Mm, W- 200Mm, H - 155Mm , Allen Key, 9 Pcsper Set, ( 1.5, 2.5, 3, 4, 5, 6, 8, 10 Mm ) , Scissors Blade, 150 Mm , Electrical Loads: Set Of Incandescent Lamp, Tube Light, Cfl, Led Light, Heater And Geyser, Electrical Loads: Set Of Incandescent Lamp, Tube Light, Cfl, Led Light, Heater And Geyser , Torque Wrench, 8N-M To 15N-M , Pipe Cutter To Cut Pipes, Upto 5 Cm. Dia , Pipe Cutter To Cut Pipes, Above 5 Cm Dia , Try Square, 150 Mm Blade , Multi Meter ( Analog ) , 0 To 1000 M Ohms, 2V To 500 V, 100 Microa To 10A Dc And Ac , Load Bank ( Variable ) , Up To 1.2 Kw ( Lamp / Heater Type ) , Wire Cutter And Stripper, 150 Mm , Earth Plate, 60Cm X 60Cm X 3.15Mm Copper Plate 60Cm X 60Cm X 6Mm Gi Plate , Earth Electrode, Primary Electrode 2100X 28X 3.25 Mm Secondary Cu Strip 20X5mm , Out Side Micrometer, 0 - 25 Mm Least Count 0.01 Mm , Tap Set, Different Size , Trolley For Transportation Ofbatteries, Stanley Foldable Steel Platform Trolley 150 Kg , Die For Threading, Different Sizes , Rooftop Mounting Structure, For 4 X 250 W Solarpanels Mountingpractice, With Tiltadjustment , Electrical Wiring And Switch Gear Rack, Electrical Control Elements Suitable For Practice Of Control Circuits Using Banana Plugs And Sockets , Protective Relays Andcontactors Rack, Suitable For Practice Of Control Circuits Using Banana Plugs And Sockets , Mccb, 100Amps, Triple Pole , Elcb And Rccb, 25Amps, Double Pole And 25Amps, Double Pole, Idn 30 Ma , Fuses, Hrc, Glass, Rewire Type , Civil Work Utensils, 1.Spade, 2. Mixing Spoon, 3.Leveling Plates , Plumbing Tools, The Plumbing Tools List1.Pipe Wrench, 2. Basin Wrench, 3.Adjustable Wrench, 4.Faucetkey Pipe Work, 5.Hacksaw, 6.Tube And Plastic Pipe Cutters, 7.Plumberrs Torch, 8.Thread Sealing Tape, 9.Pliers, 10.Press Fitting Systems, 11.Goggles, 12.Gloves, 13.Heat Shields / Pads, 14.Pex Pipe Expender & Fittings, , Multimeter, Digital 0 To 1000 M Ohms, 2V To 700 V, 100 Microa To 10A Dc And Ac , Megger, Analog - 500 V, Digital -500V , Hydrometer, Specific Gravity Range 1000 - 1500 , Solar Insulation Meter, 5 Kv, Digital, Insulation Resistance- ( 0.1M To 200G ) Ohm , Pyranometer, 0 - 90 Degree Tilt At 1000 W / Sq.M Beam Irradiance , Pyrheliometer, Iso:9060 First Class Ms - 57, Spectral Range: 200 To 4000Nm, Irradiance Range: 0 - 4000 W / M² Temperature Range: -40 To +80° C , Lux Meter, Lux Meter Lcd Read Out 0.05 To 7000 Lumens With Battery , Magnetic Flux Meter, 0-500 Tesla , Tong Tester / Clamp Meter, 0 - 100 A ( Digital Type ) , Soldering Iron, 25 Watt, 65 Watt And 120 Watt, 230 Volt , Temperature Controlled Soldering Iron, 50 Watt, 230 Volt , Thermometer Digital, 0° C - 150° C , Sun Shine Recorder, ( 1604 ) Sunshine Recorder In Northern And Southern Equatorial Zones Between 25...60° , Solar Cell Based Sunlight Radiation Meter, For Solar Powermeasurement Up To 2000 W / Square Meter , Magnetic Compass, Output Power : 10 Watts ( Approximate ) . Range : 0 To 300 Meters. , Cut Models Of Photo Voltaic Cell Assembly, Mono Crystalline Module, Amorphous Silicon Module, Thin Film Module, Poly Crystalline Module , Cut Model Of Lead Acid Battery, Cut Model Of Lead Acid Battery , Lead Acid Battery, 12V, 40Ah, 75Ah , Lead Acid Battery, 12V, 100 Ah , Solar Simulator For Solar Cell Characteristic Study, To Study Iv Curve Of A Solar Cell Of Minimum 2 Watt Under Variable Illumination, Temperature And Suitable Load , Iv Curve Tester, 1500V Iv Curve Tester - 500W, Detection Of I-V Curve On Pv Modules And Strings: 1500V / 10A - 1000V / 15A Quick Ivck Test For Measuring Voc And Isc On Pv Modules And Strings Voc 1500V / Isc 15A , Weather Monitoring Station, To Monitor And Record Sunshine, Wind Velocity, Temperature, Rainfall Etc With Software. , Solar Grid Tied Inverter Demonstrator Kit, 3Kw Solar Grid Tie Inverter , Solar, Wind And Hybrid Power Plant, 1 Kw Cumulative , Solar Street Light, 12V, 75Ah Battery, 75 Wpsolar Panel, 12V, 10A Dusk To Dawn Charge Controller, 60 W Led Lights And 9 M Height Pole All Dismountable , Solar Dc Pump, 1 Hp With Full Assembly I.E, Solar Panel, Controller, Electrical Protections, Accessories Etc. , Sun Path Finder, Sun Pathfinder, Highly Polished, Transparent, Convex Plastic Dome To Give A Panoramic View Of The Entire Site , Solar Energy Trainer With Grouping Of Solar Cells, To Group ( Series Or Parallel ) At Least Six Solar Cells Each With Minimum 2 W With Suitable Loads , Solar Tracker Demonstrator Kit, To Study Manual Andautomatic Control Of 10 Wsolar Panel In East- West And North-South &Back , Solar Pv E-Learningsoftware Using Animations For Training, Solar Pv E-Learningsoftware Using Animations For Training , Halogenlamp Withstand For Illumination Ofsolar Panels In Lab, Ac Mains Operated Toprovide 0 To 1000 Watts Per Meter Square , Motorized Bench Grinder, Ac Mains Operatedheavy Duty 6 Inch 0.5 Hp Single Phase Bench Grinder, 2800 Rpm, 0.37 Kw , Battery Charger, 0 - 6 - 9 - 12 - 24 - 48 V, 30Amp , Solar Photovoltaic Module, 75 W Mono Crystalline Module, 75 W Amorphous Silicon Module, 250 W Thin Film Module, 5W, 10W, 40W Poly Crystalline Module , Solar Panels, 250 Wp Poly Crystalline Solar Panel , Solar Charge Controller With Dusk To Dawn Automatic Switching, 10 Amp 12V Solar Charge Controller, D2d, Auto On / Off At Night / Day? Pwm , Micro Controlle Based Design , Solar Charge Controller With Manual Switch ( Day Lighting ) , 10 Amp 12V Solar Charge Controller With Manual Switch ( Day Lighting ) , Array Junction Box, For Connecting 250W X 4 Nos. Solar Panel With Dc Fuse, Dc Mcb, And Surge Suppressor Protection , Solar Lantern, Led Type , Solar Lantern, Cfl Type , Solar Lantern Assembly Sets, Compact Fluorescent / Led Lamp Of 5 / 7W In 4 Pins And Has Spv Module Features, Type Of Product : Solar Cfl Lantern Body Material : Abs Type Of Battery : Smf Battery Capacity ( Ah ) : 7 Ah Spv Module :8 Wp , Home Light System, 12 V Dc With Fm Receiver, Led Bulb And Mobile Charger As Loads , Solar Cell Kit, To Demonstrate The Effects Of Conversion Of Solar Light Into Electricity. The Apparatus Consists Of : * Moving Coil Meters Fitted On Box * Lamp House With Power Supply * Solar Cell Mounted * Connection Leads * Fan Is Connected * Led Is Connected Luminous 160 Watt - 12V Poly Crystalline Solar Panel. , Clinometer, For Angle Measurement Accuracy 2.0 Mm Size 50 Mm To 2000 Mm , Spirit Level, For Floor Level Check Accuracy Depends On Its Sensitivity. ... 2 Mm ( 0.079 In ) , Anemometer, The Wind Sensor Is Measuring Velocities Up To 40 M / S And Wind Directions Over A Range From 2.5 º - 357.5 º , Dc Table Fan, 12 V , A.C. Voltmeter M.I, 0 –500V Ac , Volt Meter, 0 - 30V , Volt Meter, 0 - 100V , Ammeter Mc, 0 - 1A , Ammeter Mc, 0 - 5A , Ammeter Mccentre Zero, 0 - 20A , Ammeter Mccentre Zero, 0-50A , Power Factor Meter, Single Phase Digital Type , Rheostat, 0 -1 Ohm, 5 Amp, 0 -10 Ohm, 5 Amp, 0- 25 Ohm, 1 Amp, 0- 300 Ohm, 1 Amp , A.C. Energy Meter, Single Phase, 10 A, 240 V Induction Type , A.C. Energy Meter, Three Phase, 15 A, 440 V Induction Type , Kilo Wattmeter Analog, 0-1.5-3Kw, Pressure Coil Rating- 240V / 440V, Current Rating-5A / 10A Analog, Portable Type Housed In Bakelite Case , Digital Wattmeter, 230 V, 1 Kw, 50 Hz , Phase Sequence Indicator, 3 Phase, 415 V , Frequency Meter, 45 To 55 Hz , Dc Led Lamp, 3W, 5W, 10W ( 50 Nos Each ) , Dc Pump, 24 V , Pwm Controller, Dc 12 / 24 V, 30 A , Mppt Charge Controller, Dc 12 / 24 V, 30 A , Inverter With Battery, 1 Kva With 12 V Batteryinput- 12 Volt Dc, Output-220 Volt Ac , Solar Pcu, Off Grid 1 Kw Mppt Sinewave Solar Powerconditioning Unit , Solar Traffic Light, 12V, 75Ah Battery, 75 Wpsolar Panel, 12V, 10A Dusk To Dawn Charge Controller, 15 W Led Lights With Suitable Colors And 9 M Height Pole All Dismountable , Used Water Treatment Solar Plant Demonstrator Kit, 1 Liter Capacity , Demonstration Kit For Wind Generation ( Wind Turbine With Blower ) , 300 W , Led Lights, 12 V Dc , Led Lights, 6 V Dc , Rubber Gloves, Class 00, Thickness 0.5Mm, Length 360Mm, 0.5Kv, 750V Dc , Cotton Gloves, Cream White Colour, Size: 12” Length With Free Size Palm & Cuff , Gum Boots, 14” Inches Gumboot.Size Available ( 5-10 ) , Afety Goggles, The Goggle Should Be Capable Of Resisting Impact From A 6.35 Mm ( 1 / 4 Inch ) Diameter Steel Ball Fired At A Velocity Of 45.7 Mps Or 150 Fps At Specified Parts Of The Polycarbonate Lens And Should Be Tested By Placing Sample Eyewear On A Head Form. , Safety Helmet, Mediumsize , Head Band Size ( 540 -590 In Mm ) , First Aid Kit, Standard , Fire Extinguisher Co2, 2 Kg , Fire Buckets, Standard Size , A ) Compressor Unit Suitable For Pressure: 8 Bar, Delivery: 50 Lpm ( Or More ) , Reservoir Capacity: 24 Litres ( Or More ) , 230V, 50 Hz, With Pressure Regulator And Water Separator. B ) Pneumatic Trainer Kit, Each Consisting Of The Following Matching Components And Accessories:-01 Sets I. Single Acting Cylinder Max. Stroke Length 50 Mm, Bore Dia. 20 Mm -1 No Ii. Double Acting Cylinder Max. Stroke Length 100 Mm, Bore Dia 20 Mm, Magnetic Type -1 No Iii. 3 / 2-Way Valve Manually-Actuated, Normally Closed -2 Nos. Iv. 3 / 2-Way Valve Pneumatically-Actuated, Spring Return -1 No V. One-Way Flow Control Valve-2 Nos. Vi. 5 / 2-Way Valve With Manually-Operated Switch -1 No Vii. 5 / 2-Way Valve Pneumatically-Actuated, Spring Return -1 No Viii. 5 / 2-Way Pneumatic Actuated Valve Double Pilot -1 No Ix. 3 / 2-Way Roller Lever Valve Direct Actuation Normally Closed -2 Nos. X. Shuttle Valve ( Or ) -1 No Xi. Two-Pressure Valve ( And ) -1 No Xii. Pressure Gauge 0-16 Bar -1 Nos. Xiii. Manifold With Self-Closing Nrv, 6-Way -1 No Xiv. Pushbutton Station For Electrical Signal Input With 3 Illuminated Momentary-Contact Switches ( 1 No + 1 Nc ) And 1 Illuminated Maintained- Contact Switch ( 1 No + 1 Nc ) , Contact Load 2A -1 No Xv. Relay Station With 3 Relays Each With 4 Contact Sets ( 3No+1Nc Or Change-Over Type ) , 5 A -1 No Xvi. 3 / 2-Way Single Solenoid Valve With Led -1 No Xvii. 5 / 2-Way Single Solenoid Valve With Manual Override And Led -1 No Xviii. 5 / 2-Way Double Solenoid Valve With Manual Override And Led -1 No Xix. Power Supply Unit, Input Voltage 85 – 265 V Ac, Output Voltage: 24 V Dc, Output Current: Max. 4.5 A, Short-Circuit-Proof. -1 No Xx. Profile Plate, Anodised Aluminium 1100X700 Mm, With Carriers.C ) Pneumatic Workstation With 40 Square Mm Aluminium Profile Legs, Wooden Work Surface, And One Pedestal Drawer Unit Having 5 Drawers, Each With Handles And Individual Locks, On Metallic Full Panel Drawer Slide: ( 1 ) Worktable – Size ( Approx. ) L 1200Mm X W 900Mm X H 900 Mm, With Four Castor Wheels Including Two Lockable Wheels At The Front Side, ( 2 ) Drawer – Size ( Approx. ) – L460mm X W495mm X H158mm Each, And Overall Size Of Drawer Unit ( Approx. ) -L470mm X W495mm X H825m M And ( 3 ) Drawer Slide Height ( Approx. ) 85Mm. D ) Carrier For Mounting Components, Such As Pb & Relay Boxes. E ) Cut Section Model For Pneumatic Components, Mention In Item Description And , A ) Hydraulic Trainer Kit, Each Consisting Of The Following Matching Components And Accessories: I. Hydraulic Power Pack With ( 1 ) External Gear Pump Having A Delivery Rate Of 2.5 Lpm, ( Approx. ) @ 1400 Rpm Operating Pressure 60 Bar, Coupled To A Single-Phase Ac Motor ( 230 V Ac ) Having Start Capacitor And On / Off Switch And Overload Protection, ( 2 ) Pressurerelief Valve Adjustable From 0 – 60 Bar, ( 3 ) Oil Reservoir, =5 Litres Capacity Having Sight Glass, Drain Screw, Air Filter, Andp And T Ports. Ii. Pressure Relief Valve Pilot-Operated -1 No Iii. Drip Tray, Steel Size 1160 Mm X 760 Mm. -1 No. Iv. Pressure Gauge Glycerin-Damped, Indication Range Of: 0 – 100 Bars -1 No. V. Four-Way Distributor With Five Ports, Equipped With A Pressure Gauge -1 No. Vi. Double Acting Hydraulic Cylinder With A Control Cam, Piston Diameter16 Mm, Piston Rod Diameter10 Mm, Stroke Length 200 Mm. -1 No. Vii. Suitable Weight For Vertical Loading Of Hydraulic Cylinder -1 No. Viii. Mounting Kit For Weight For Realizing Pulling And Pushing Load. -1 No. Ix. 3 / 2-Way Directional Control Valve With Hand Lever Actuation. -1 No. X. 4 / 2-Way Directional Control Valve With Hand Lever Actuation. -1 No. Xi. 4 / 3-Way Directional Control Valve Closed-Centre Position, With -1 No.Hand Lever Actuation. - Xii. Non-Return Valve.-1 No. Xiii. Pilot-Operated Check Valve Pilotto Open. -1 No. Xiv. One-Way Flow Control Valve Withintegrated Check Valve. -1 No. Xv. T-Connector With Self-Sealing Coupling Nipples ( 2 Nos. ) And Quick Coupling Socket ( 1 No. ) .-2 Nos. Xvi. Profile Plate, Anodised Aluminium, 1100X700 Mm, With Carriers, Mounting Frames And Mounting Accessories ( To Be Fitted Onto The Hydraulic Workstation ) -1 Set B ) Hydraulic Workstation With 40 Square Mm Aluminium Profile Legs, Wooden Worksurface, Andonepedestaldrawer Unit Having 5 Drawers, Each With Handles And Individual Locks, On Metallic Full Panel Drawer Slide: ( 1 ) Worktable – Size ( Approx. ) L1200mmxw900mmxh900 Mm, With Four Castor Wheels Including Two Lockable Wheels At The Front Side, ( 2 ) Drawer – Size ( Approx. ) – L460mmxw495mm Xh158mm Each, And Overall Size Of Drawer Unit ( Approx. ) L470mmxw495mmxh825m M And ( 3 ) Drawer Slide Height ( Approx. ) 85Mm.C ) Cut-Section Models For Hydraulic Components , Mention In Item Description And

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 17-Jan-2022 Clarification for column no 06 in BOQ . Other 28-Jan-2022

BOQ

Name of Work:Name of Work: Supply, Testing, Installation & Commissioning and Demonstration of Tools & Equipment for Solar Technician (Electrical)and Pneumatic & Hydraulic for Fitter Trade at Govt. Industrial Training Institute, Jhargram in Strive Project
Sl. No. Item Description
1Solar Technician (Electrical)and Pneumatic and Hydraulic for Fitter Trade
2Measuring Steel Tape,5 meter
3Combination Plier Insulated,200 mm
4Screw Driver Insulated,4mm X 150 mm, Diamond Head
5Screw Driver Insulated,6mm X 150 mm
6Electrician screw driver thin stem insulated handle,4mm X 100 mm
7Heavy Duty Screw Driver insulated,5mm X 200 mm
8Electrician Screw Driver thin stem insulated handle,4mm X 250 mm
9Punch Centre,9mm X 150 mm
10Knife Double Bladed Electrician,100 mm
11Neon Tester,500 V
12Steel Rule Graduated both in Metric and English Unit,300 mm with precision of 1/4th mm
13Hammer, cross peen with handle,250 grams
14Electrical Symbol andAccessories Charts,as per NIMI Standard
15Pipe vice Cast Iron withhardened jaw open type,100 mm
16Hand Vice,50 mm jaw
17Table Vice,100 mm jaw
18Hacksaw frame (with blade),Adjustable 300 mm Fixed 150 mm
19File flat,200 mm 2nd cut with handle
20File half round,200 mm 2nd cut with handle
21File round,200 mm 2nd cut with handle
22Pliers long nose insulated,150 mm
23Pliers flat nose insulated,200 mm
24Pliers, round nose insulated,100 mm
25D.E. metric Spanner DoubleEnded,6 - 32 mm
26Gauge, wire imperial stainlees steel marked in SWG & mm,Wire Gauge - Metric
27Portable Electric Drill Machine,0-12 mm capacity750W, 240V with chuck & key and twist drill bit (2,3,4,5,6, 10mm)
28Crimping Tool,1.5 sqmm to 16 sq mm 16 sq mm to 95 sq mm
29Pliers Side Cutting,150 mm
30Wire stripper adjustable length,200mm ,stripping capacity ( 0.2 - 6.0 sq mm)
31Hammer, ball peen With handle,250 grams
32Scriber (Knurled centre position ),200mm
33Tool kit Box/bag portable,L- 450mm, W- 200mm, H - 155mm
34Allen Key,9 pcsper set, ( 1.5,2.5,3,4,5,6,8,10 mm)
35Scissors blade,150 mm
36Electrical loads: set of Incandescent lamp, Tube light, CFL, LED light, Heater and Geyser,Electrical loads: set of Incandescent lamp, Tube light, CFL, LED light, Heater and Geyser
37Torque wrench,8N-m to 15N-m
38Pipe Cutter to cut pipes,upto 5 cm. dia
39Pipe Cutter to cut pipes,above 5 cm dia
40Try Square,150 mm blade
41Multi Meter (analog),0 to 1000 M Ohms, 2V to 500 V,100 microA to 10A DC and AC
42Load Bank (variable),Up to 1.2 KW ( Lamp / heater Type)
43Wire Cutter and Stripper,150 mm
44Earth Plate,60cm X 60cm X 3.15mm Copper Plate 60cm X 60cm X 6mm GI Plate
45Earth Electrode,Primary Electrode 2100x 28x 3.25 mm Secondary Cu Strip 20x5mm
46Out Side Micrometer,0 - 25 mm least count 0.01 mm
47Tap set,Different size
48Trolley for Transportation ofBatteries,Stanley foldable steel platform trolley 150 Kg
49Die for Threading,Different sizes
50Rooftop Mounting Structure,For 4 x 250 W solarpanels mountingpractice, with tiltadjustment
51Electrical wiring and switch gear rack,Electrical control elements suitable for practice of control circuits using banana plugs and sockets
52Protective relays andcontactors rack,suitable for practice of control circuits using banana plugs and sockets
53MCCB,100Amps, Triple pole
54ELCB and RCCB,25Amps, double pole and 25Amps, double pole, I?n 30 mA
55Fuses,HRC, Glass, Rewire Type
56Civil work utensils,1.spade, 2. mixing spoon, 3.leveling plates
57Plumbing tools,The plumbing Tools List1.Pipe wrench,2. Basin wrench,3.Adjustable wrench,4.Faucetkey pipe work,5.Hacksaw,6.Tube and Plastic pipe cutters, 7.Plumberr\"s torch,8.Thread sealing tape, 9.Pliers,10.Press fitting systems,11.Goggles,12.Gloves,13.Heat shields / pads,14.PEX pipe expender & fittings,
58Multimeter,Digital 0 to 1000 M Ohms, 2V to 700 V,100 microA to 10A DC and AC
59Megger,Analog - 500 V, Digital -500V
60Hydrometer,specific gravity range 1000 - 1500
61Solar Insulation meter,5 KV, Digital, Insulation Resistance- (0.1M to 200G) Ohm
62Pyranometer,0 - 90 degree tilt at 1000 W/sq.m beam irradiance
63Pyrheliometer,ISO:9060 First Class MS - 57,Spectral range: 200 to 4000nm,Irradiance range: 0 - 4000 W/m²Temperature range: -40 to +80° C
64Lux meter,Lux meter LCD read out 0.05 to 7000 Lumens with Battery
65Magnetic Flux Meter,0-500 tesla
66Tong Tester / Clamp Meter,0 - 100 A (Digital Type)
67Soldering Iron,25 Watt, 65 Watt and 120 Watt, 230 Volt
68Temperature controlled Soldering Iron,50 Watt, 230 Volt
69Thermometer Digital,0° C - 150° C
70Sun Shine recorder,(1604) Sunshine recorder In northern and southern equatorial zones between 25...60°
71Solar cell based sunlight radiation meter,For Solar powermeasurement up to 2000 w/square meter
72Magnetic compass,Output Power : 10 Watts (approximate). Range : 0 to 300 meters.
73Cut models of photo voltaic cell assembly,Mono crystalline module,Amorphous silicon module,Thin film module,Poly crystalline module
74Cut model of Lead acid battery,Cut model of Lead acid battery
75Lead Acid battery,12V, 40Ah, 75Ah
76Lead Acid battery,12V, 100 Ah
77Solar simulator for solar cell characteristic study,To study IV curve of a solar cell of minimum 2 watt under variable illumination, temperature and suitable load
78IV Curve tester,1500V IV Curve Tester - 500W,Detection of I-V curve on PV modules and strings: 1500V/10A - 1000V/15AQuick IVCK test for measuring Voc and Isc on PV modules and strings VOC 1500V / ISC 15A
79Weather monitoring station,To monitor and record Sunshine, wind velocity, temperature, rainfall etc with software.
80Solar Grid tied inverter Demonstrator kit,3KW Solar Grid TIE Inverter
81Solar, wind and hybrid power plant,1 KW cumulative
82Solar Street Light,12V, 75Ah battery, 75 Wpsolar panel, 12V, 10A dusk to dawn charge controller, 60 W LED lights and 9 m height pole all dismountable
83solar DC pump,1 HP with full assembly i.e, Solar Panel, Controller, electrical protections, accessories etc.
84Sun path finder,Sun pathfinder,Highly polished, transparent, convex plastic dome to give a panoramic view of the entire site
85Solar energy trainer with grouping of solar cells,To group (series or parallel) at least six solar cells each with minimum 2 W with suitable loads
86Solar tracker demonstrator kit,To study manual andautomatic control of 10 Wsolar panel in East- west and North-south &back
87Solar PV e-learningsoftware using animations for training,Solar PV e-learningsoftware using animations for training
88Halogenlamp withstand for illumination ofsolar panels in lab,AC mains operated toprovide 0 to 1000 watts per meter square
89Motorized Bench Grinder,AC mains operatedHeavy Duty 6 inch 0.5 HP Single Phase Bench Grinder, 2800 Rpm, 0.37 Kw
90Battery Charger,0 - 6 - 9 - 12 - 24 - 48 V, 30amp
91Solar photovoltaic module,75 W mono crystalline module,75 W amorphous silicon module,250 W thin film module,5W, 10W, 40W poly crystalline module
92Solar panels,250 WP Poly Crystalline Solar Panel
93Solar Charge controller with Dusk to Dawn automatic switching,10 Amp 12V Solar Charge Controller, D2D, Auto ON/OFF at Night/Day?PWM , Micro controlle based design
94Solar charge controller with manual switch ( Day lighting),10 Amp 12V Solar Charge Controller with manual switch (Day lighting)
95Array junction box,For connecting 250W x 4 Nos. solar panel with DC fuse, DC MCB, and surge suppressor protection
96Solar lantern,LED type
97Solar lantern,CFL type
98Solar lantern assembly sets,Compact Fluorescent /LED Lamp of 5/7W in 4 pins and has SPV module features,Type of Product : Solar CFL LanternBody Material : ABSType of Battery : SMFBattery Capacity(Ah) : 7 AhSPV Module :8 Wp
99Home light system,12 V DC with FM receiver, LED bulb and mobile charger as loads
100Solar cell kit,To demonstrate the effects of conversion of Solar light into electricity. The apparatus consists of :* Moving coil meters fitted on box* Lamp house with power supply* Solar cell mounted* Connection leads* Fan is connected* LED is connected Luminous 160 Watt - 12V Poly Crystalline Solar Panel.
101Clinometer,for Angle measurement Accuracy 2.0 mm Size 50 mm to 2000 mm
102Spirit level,For floor level check accuracy depends on its sensitivity. ... 2 mm (0.079 in)
103Anemometer,The wind sensor is measuring velocities up to 40 m/s and wind directions over a range from 2.5 º - 357.5 º
104DC table fan,12 V
105A.C. Voltmeter M.I,0 –500V AC
106Volt meter,0 - 30V
107Volt meter,0 - 100V
108Ammeter MC,0 - 1A
109Ammeter MC,0 - 5A
110Ammeter MCcentre zero,0 - 20A
111Ammeter MCcentre zero,0-50A
112Power Factor Meter,single phase digital type
113Rheostat,0 -1 Ohm, 5 Amp, 0 -10 Ohm, 5 Amp,0- 25 Ohm, 1 Amp, 0- 300 Ohm, 1 Amp
114A.C. Energy Meter,Single Phase, 10 A, 240 V induction type
115A.C. Energy Meter,Three Phase, 15 A, 440 V induction type
116Kilo Wattmeter Analog,0-1.5-3KW, pressure coil rating- 240v/440v, current rating-5A/10A Analog, portable type Housed in bakelite case
117Digital Wattmeter,230 V, 1 KW, 50 Hz
118Phase Sequence Indicator,3 Phase, 415 V
119Frequency Meter,45 to 55 Hz
120DC LED Lamp,3W, 5W, 10W (50 Nos each)
121DC Pump,24 V
122PWM Controller,DC 12/24 v, 30 A
123MPPT Charge Controller,DC 12/24 v, 30 A
124Inverter with Battery,1 KVA with 12 V BatteryInput- 12 volt DC, Output-220 volt AC
125Solar PCU,Off grid 1 KW MPPT Sinewave Solar PowerConditioning Unit
126Solar Traffic Light,12V, 75Ah battery, 75 Wpsolar panel, 12V, 10A dusk to dawn charge controller, 15 W LED lights with suitable colors and 9 m height pole all dismountable
127Used water treatment solar plant demonstrator kit,1 liter capacity
128Demonstration kit for wind generation (Wind turbine with blower),300 W
129LED lights,12 V DC
130LED lights,6 V DC
131Rubber gloves,Class 00, thickness 0.5mm,Length 360mm, 0.5KV,750V Dc
132Cotton gloves,cream whitecolour, Size: 12” Length with Free size palm & cuff
133Gum boots,14” inches gumboot.Size available (5-10)
134afety Goggles,The goggle should be capable of resisting impact from a 6.35 mm (1/4 inch) diameter steel ball fired at a velocity of 45.7 mps or 150 fps at specified parts of the Polycarbonate lens and should be tested by placing sample eyewear on a head form.
135Safety Helmet,mediumSize ,Head Band Size ( 540 -590 in mm)
136First Aid Kit,Standard
137Fire Extinguisher CO2,2 KG
138Fire Buckets,Standard size
139A) Compressor unit suitable for Pressure: 8 bar, Delivery: 50 lpm (or more), Reservoir capacity: 24 Litres (or more), 230V, 50 Hz, with pressure regulator and water separator. B)Pneumatic Trainer Kit, each consisting of the following matching components and accessories:-01 setsI. Single acting cylinder Max. stroke length 50 mm, Bore dia. 20 mm -1 NoII. Double acting cylinder Max. stroke length 100 mm, Bore dia 20 mm, magnetic type -1 NoIII. 3/2-way valve manually-actuated, Normally Closed -2 Nos.IV. 3/2-way valve pneumatically-actuated, spring return -1 NoV. One-way flow control valve-2 Nos.VI. 5/2-way valve with manually-operated switch -1 No VII. 5/2-way valve pneumatically-actuated, spring return -1 No VIII. 5/2-way pneumatic actuated valve double pilot -1 No IX. 3/2-way roller lever valve direct actuation Normally Closed -2 Nos. X. Shuttle valve (OR)-1 No XI. Two-pressure valve (AND)-1 No XII. Pressure gauge 0-16 bar -1 Nos. XIII. Manifold with self-closing NRV, 6-way -1 No XIV. Pushbutton station for electrical signal input with 3 illuminated momentary-contact switches (1 NO + 1 NC) and 1 illuminated maintained- contact switch (1 NO + 1 NC), Contact load 2A -1 No XV. Relay station with 3 relays each with 4 contact sets (3NO+1NC or Change-over type), 5 A -1 No XVI. 3/2-way single solenoid valve with LED -1 NoXVII. 5/2-way single solenoid valve with manual override and LED -1 No XVIII. 5/2-way double solenoid valve with manual override and LED -1 No XIX. Power supply unit, Input voltage 85 – 265 V AC, Output voltage: 24 V DC, Output current: max. 4.5 A, short-circuit-proof. -1 No XX. Profile plate, Anodised Aluminium 1100x700 mm, with carriers.C) Pneumatic Workstation with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide: (1) Worktable – Size (Approx.) L 1200mm X W 900mm X H 900 mm, with four castor wheels including two lockable wheels at the front side, (2) Drawer – Size (Approx.) – L460mm x W495mm x H158mm each, and overall size of Drawer unit (Approx.) -L470mm x W495mm x H825m m and(3) Drawer slide height (Approx.) 85mm. D)Carrier for mounting components, such as PB & relay boxes. E) Cut section model for pneumatic components,Mention in Item description and
140A) Hydraulic Trainer Kit, each consisting of the following matching components and accessories: I. Hydraulic Power pack with (1) external gear pump having a delivery rate of 2.5 lpm, (approx.) @ 1400 rpm operating pressure 60 bar, coupled to a single-phase AC motor (230 V AC) having start capacitor and ON/OFF switch and overload protection, (2) pressurerelief valve adjustable from 0 – 60 bar, (3) oil reservoir, =5 litres capacity having sight glass, drain screw, air filter, andP and T ports. II. Pressure relief valve pilot-operated -1 No III. Drip tray, steel size 1160 mm x 760 mm. -1 No. IV. Pressure Gauge Glycerin-damped, Indication range of: 0 – 100 bars -1 No. V. Four-Way distributor with five ports, equipped with a pressure gauge -1 No. VI. Double acting hydraulic cylinder with a control cam, Piston diameter16 mm, Piston rod diameter10 mm, Stroke length 200 mm. -1 No. VII. Suitable Weight for vertical loading of hydraulic cylinder -1 No.VIII. Mounting kit for weight for realizing pulling and pushing load. -1 No. IX. 3/2-way directional control valve with hand lever actuation. -1 No. X. 4/2-way directional control valve with hand lever actuation. -1 No. XI. 4/3-way directional control valve closed-centre position, with -1 No.hand lever actuation. - XII. Non-return valve.-1 No. XIII. Pilot-operated check valve Pilotto open. -1 No. XIV. One-way flow control valve Withintegrated check valve. -1 No. XV. T-Connector with self-sealing coupling nipples (2 Nos.) and quick coupling socket (1 No.).-2 Nos. XVI. Profile plate, Anodised Aluminium, 1100x700 mm, with carriers, mounting frames and mounting accessories (To be fitted onto the Hydraulic workstation) -1 setB) Hydraulic Workstation with 40 square mm aluminium profile legs, wooden worksurface,andonepedestaldrawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide: (1) Worktable – Size (Approx.) L1200mmXW900mmXH900 mm, with four castor wheels including two lockable wheels at the front side, (2) Drawer – Size (Approx.) – L460mmxW495mm xH158mm each, and overall size of Drawer unit (Approx.) L470mmxW495mmxH825m m and(3) Drawer slide height (Approx.) 85mm.C)Cut-section models for hydraulic components ,Mention in Item description and

AI Tender Summary

OUR REF NO 30714773
AUTHORITY Government Departments
TENDER VALUE 49.48 Lakhs
LAST DATE 28-01-2022
Authority
Authority Name Technical Education and Training Department
Work Description Supply, Testing, Installation Andcommissioning And Demonstration Of Tools And Equipment For Solar Technician ( Electrical ) And Pneumatic And Hydraulic For Fitter Trade At Govt. Industrial Training Institute, Jhargram Supply, Testing, Installation Andcommissioning And Demonstration Of Tools And Equipment For Solar Technician ( Electrical ) And Pneumatic And Hydraulic For Fitter Trade At Govt. Industrial Training Institute, Jhargram , Solar Technician ( Electrical ) And Pneumatic And Hydraulic For Fitter Trade , Measuring Steel Tape, 5 Meter , Combination Plier Insulated, 200 Mm , Screw Driver Insulated, 4Mm X 150 Mm, Diamond Head , Screw Driver Insulated, 6Mm X 150 Mm , Electrician Screw Driver Thin Stem Insulated Handle, 4Mm X 100 Mm , Heavy Duty Screw Driver Insulated, 5Mm X 200 Mm , Electrician Screw Driver Thin Stem Insulated Handle, 4Mm X 250 Mm , Punch Centre, 9Mm X 150 Mm , Knife Double Bladed Electrician, 100 Mm , Neon Tester, 500 V , Steel Rule Graduated Both In Metric And English Unit, 300 Mm With Precision Of 1 / 4Th Mm , Hammer, Cross Peen With Handle, 250 Grams , Electrical Symbol Andaccessories Charts, As Per Nimi Standard , Pipe Vice Cast Iron Withhardened Jaw Open Type, 100 Mm , Hand Vice, 50 Mm Jaw , Table Vice, 100 Mm Jaw , Hacksaw Frame ( With Blade ) , Adjustable 300 Mm Fixed 150 Mm , File Flat, 200 Mm 2Nd Cut With Handle , File Half Round, 200 Mm 2Nd Cut With Handle , File Round, 200 Mm 2Nd Cut With Handle , Pliers Long Nose Insulated, 150 Mm , Pliers Flat Nose Insulated, 200 Mm , Pliers, Round Nose Insulated, 100 Mm , D.E. Metric Spanner Doubleended, 6 - 32 Mm , Gauge, Wire Imperial Stainlees Steel Marked In Swg & Mm, Wire Gauge - Metric , Portable Electric Drill Machine, 0-12 Mm Capacity750w, 240V With Chuck & Key And Twist Drill Bit ( 2, 3, 4, 5, 6, 10Mm ) , Crimping Tool, 1.5 Sqmm To 16 Sq Mm 16 Sq Mm To 95 Sq Mm , Pliers Side Cutting, 150 Mm , Wire Stripper Adjustable Length, 200Mm , Stripping Capacity ( 0.2 - 6.0 Sq Mm ) , Hammer, Ball Peen With Handle, 250 Grams , Scriber ( Knurled Centre Position ) , 200Mm , Tool Kit Box / Bag Portable, L- 450Mm, W- 200Mm, H - 155Mm , Allen Key, 9 Pcsper Set, ( 1.5, 2.5, 3, 4, 5, 6, 8, 10 Mm ) , Scissors Blade, 150 Mm , Electrical Loads: Set Of Incandescent Lamp, Tube Light, Cfl, Led Light, Heater And Geyser, Electrical Loads: Set Of Incandescent Lamp, Tube Light, Cfl, Led Light, Heater And Geyser , Torque Wrench, 8N-M To 15N-M , Pipe Cutter To Cut Pipes, Upto 5 Cm. Dia , Pipe Cutter To Cut Pipes, Above 5 Cm Dia , Try Square, 150 Mm Blade , Multi Meter ( Analog ) , 0 To 1000 M Ohms, 2V To 500 V, 100 Microa To 10A Dc And Ac , Load Bank ( Variable ) , Up To 1.2 Kw ( Lamp / Heater Type ) , Wire Cutter And Stripper, 150 Mm , Earth Plate, 60Cm X 60Cm X 3.15Mm Copper Plate 60Cm X 60Cm X 6Mm Gi Plate , Earth Electrode, Primary Electrode 2100X 28X 3.25 Mm Secondary Cu Strip 20X5mm , Out Side Micrometer, 0 - 25 Mm Least Count 0.01 Mm , Tap Set, Different Size , Trolley For Transportation Ofbatteries, Stanley Foldable Steel Platform Trolley 150 Kg , Die For Threading, Different Sizes , Rooftop Mounting Structure, For 4 X 250 W Solarpanels Mountingpractice, With Tiltadjustment , Electrical Wiring And Switch Gear Rack, Electrical Control Elements Suitable For Practice Of Control Circuits Using Banana Plugs And Sockets , Protective Relays Andcontactors Rack, Suitable For Practice Of Control Circuits Using Banana Plugs And Sockets , Mccb, 100Amps, Triple Pole , Elcb And Rccb, 25Amps, Double Pole And 25Amps, Double Pole, Idn 30 Ma , Fuses, Hrc, Glass, Rewire Type , Civil Work Utensils, 1.Spade, 2. Mixing Spoon, 3.Leveling Plates , Plumbing Tools, The Plumbing Tools List1.Pipe Wrench, 2. Basin Wrench, 3.Adjustable Wrench, 4.Faucetkey Pipe Work, 5.Hacksaw, 6.Tube And Plastic Pipe Cutters, 7.Plumberrs Torch, 8.Thread Sealing Tape, 9.Pliers, 10.Press Fitting Systems, 11.Goggles, 12.Gloves, 13.Heat Shields / Pads, 14.Pex Pipe Expender & Fittings, , Multimeter, Digital 0 To 1000 M Ohms, 2V To 700 V, 100 Microa To 10A Dc And Ac , Megger, Analog - 500 V, Digital -500V , Hydrometer, Specific Gravity Range 1000 - 1500 , Solar Insulation Meter, 5 Kv, Digital, Insulation Resistance- ( 0.1M To 200G ) Ohm , Pyranometer, 0 - 90 Degree Tilt At 1000 W / Sq.M Beam Irradiance , Pyrheliometer, Iso:9060 First Class Ms - 57, Spectral Range: 200 To 4000Nm, Irradiance Range: 0 - 4000 W / M² Temperature Range: -40 To +80° C , Lux Meter, Lux Meter Lcd Read Out 0.05 To 7000 Lumens With Battery , Magnetic Flux Meter, 0-500 Tesla , Tong Tester / Clamp Meter, 0 - 100 A ( Digital Type ) , Soldering Iron, 25 Watt, 65 Watt And 120 Watt, 230 Volt , Temperature Controlled Soldering Iron, 50 Watt, 230 Volt , Thermometer Digital, 0° C - 150° C , Sun Shine Recorder, ( 1604 ) Sunshine Recorder In Northern And Southern Equatorial Zones Between 25...60° , Solar Cell Based Sunlight Radiation Meter, For Solar Powermeasurement Up To 2000 W / Square Meter , Magnetic Compass, Output Power : 10 Watts ( Approximate ) . Range : 0 To 300 Meters. , Cut Models Of Photo Voltaic Cell Assembly, Mono Crystalline Module, Amorphous Silicon Module, Thin Film Module, Poly Crystalline Module , Cut Model Of Lead Acid Battery, Cut Model Of Lead Acid Battery , Lead Acid Battery, 12V, 40Ah, 75Ah , Lead Acid Battery, 12V, 100 Ah , Solar Simulator For Solar Cell Characteristic Study, To Study Iv Curve Of A Solar Cell Of Minimum 2 Watt Under Variable Illumination, Temperature And Suitable Load , Iv Curve Tester, 1500V Iv Curve Tester - 500W, Detection Of I-V Curve On Pv Modules And Strings: 1500V / 10A - 1000V / 15A Quick Ivck Test For Measuring Voc And Isc On Pv Modules And Strings Voc 1500V / Isc 15A , Weather Monitoring Station, To Monitor And Record Sunshine, Wind Velocity, Temperature, Rainfall Etc With Software. , Solar Grid Tied Inverter Demonstrator Kit, 3Kw Solar Grid Tie Inverter , Solar, Wind And Hybrid Power Plant, 1 Kw Cumulative , Solar Street Light, 12V, 75Ah Battery, 75 Wpsolar Panel, 12V, 10A Dusk To Dawn Charge Controller, 60 W Led Lights And 9 M Height Pole All Dismountable , Solar Dc Pump, 1 Hp With Full Assembly I.E, Solar Panel, Controller, Electrical Protections, Accessories Etc. , Sun Path Finder, Sun Pathfinder, Highly Polished, Transparent, Convex Plastic Dome To Give A Panoramic View Of The Entire Site , Solar Energy Trainer With Grouping Of Solar Cells, To Group ( Series Or Parallel ) At Least Six Solar Cells Each With Minimum 2 W With Suitable Loads , Solar Tracker Demonstrator Kit, To Study Manual Andautomatic Control Of 10 Wsolar Panel In East- West And North-South &Back , Solar Pv E-Learningsoftware Using Animations For Training, Solar Pv E-Learningsoftware Using Animations For Training , Halogenlamp Withstand For Illumination Ofsolar Panels In Lab, Ac Mains Operated Toprovide 0 To 1000 Watts Per Meter Square , Motorized Bench Grinder, Ac Mains Operatedheavy Duty 6 Inch 0.5 Hp Single Phase Bench Grinder, 2800 Rpm, 0.37 Kw , Battery Charger, 0 - 6 - 9 - 12 - 24 - 48 V, 30Amp , Solar Photovoltaic Module, 75 W Mono Crystalline Module, 75 W Amorphous Silicon Module, 250 W Thin Film Module, 5W, 10W, 40W Poly Crystalline Module , Solar Panels, 250 Wp Poly Crystalline Solar Panel , Solar Charge Controller With Dusk To Dawn Automatic Switching, 10 Amp 12V Solar Charge Controller, D2d, Auto On / Off At Night / Day? Pwm , Micro Controlle Based Design , Solar Charge Controller With Manual Switch ( Day Lighting ) , 10 Amp 12V Solar Charge Controller With Manual Switch ( Day Lighting ) , Array Junction Box, For Connecting 250W X 4 Nos. Solar Panel With Dc Fuse, Dc Mcb, And Surge Suppressor Protection , Solar Lantern, Led Type , Solar Lantern, Cfl Type , Solar Lantern Assembly Sets, Compact Fluorescent / Led Lamp Of 5 / 7W In 4 Pins And Has Spv Module Features, Type Of Product : Solar Cfl Lantern Body Material : Abs Type Of Battery : Smf Battery Capacity ( Ah ) : 7 Ah Spv Module :8 Wp , Home Light System, 12 V Dc With Fm Receiver, Led Bulb And Mobile Charger As Loads , Solar Cell Kit, To Demonstrate The Effects Of Conversion Of Solar Light Into Electricity. The Apparatus Consists Of : * Moving Coil Meters Fitted On Box * Lamp House With Power Supply * Solar Cell Mounted * Connection Leads * Fan Is Connected * Led Is Connected Luminous 160 Watt - 12V Poly Crystalline Solar Panel. , Clinometer, For Angle Measurement Accuracy 2.0 Mm Size 50 Mm To 2000 Mm , Spirit Level, For Floor Level Check Accuracy Depends On Its Sensitivity. ... 2 Mm ( 0.079 In ) , Anemometer, The Wind Sensor Is Measuring Velocities Up To 40 M / S And Wind Directions Over A Range From 2.5 º - 357.5 º , Dc Table Fan, 12 V , A.C. Voltmeter M.I, 0 –500V Ac , Volt Meter, 0 - 30V , Volt Meter, 0 - 100V , Ammeter Mc, 0 - 1A , Ammeter Mc, 0 - 5A , Ammeter Mccentre Zero, 0 - 20A , Ammeter Mccentre Zero, 0-50A , Power Factor Meter, Single Phase Digital Type , Rheostat, 0 -1 Ohm, 5 Amp, 0 -10 Ohm, 5 Amp, 0- 25 Ohm, 1 Amp, 0- 300 Ohm, 1 Amp , A.C. Energy Meter, Single Phase, 10 A, 240 V Induction Type , A.C. Energy Meter, Three Phase, 15 A, 440 V Induction Type , Kilo Wattmeter Analog, 0-1.5-3Kw, Pressure Coil Rating- 240V / 440V, Current Rating-5A / 10A Analog, Portable Type Housed In Bakelite Case , Digital Wattmeter, 230 V, 1 Kw, 50 Hz , Phase Sequence Indicator, 3 Phase, 415 V , Frequency Meter, 45 To 55 Hz , Dc Led Lamp, 3W, 5W, 10W ( 50 Nos Each ) , Dc Pump, 24 V , Pwm Controller, Dc 12 / 24 V, 30 A , Mppt Charge Controller, Dc 12 / 24 V, 30 A , Inverter With Battery, 1 Kva With 12 V Batteryinput- 12 Volt Dc, Output-220 Volt Ac , Solar Pcu, Off Grid 1 Kw Mppt Sinewave Solar Powerconditioning Unit , Solar Traffic Light, 12V, 75Ah Battery, 75 Wpsolar Panel, 12V, 10A Dusk To Dawn Charge Controller, 15 W Led Lights With Suitable Colors And 9 M Height Pole All Dismountable , Used Water Treatment Solar Plant Demonstrator Kit, 1 Liter Capacity , Demonstration Kit For Wind Generation ( Wind Turbine With Blower ) , 300 W , Led Lights, 12 V Dc , Led Lights, 6 V Dc , Rubber Gloves, Class 00, Thickness 0.5Mm, Length 360Mm, 0.5Kv, 750V Dc , Cotton Gloves, Cream White Colour, Size: 12” Length With Free Size Palm & Cuff , Gum Boots, 14” Inches Gumboot.Size Available ( 5-10 ) , Afety Goggles, The Goggle Should Be Capable Of Resisting Impact From A 6.35 Mm ( 1 / 4 Inch ) Diameter Steel Ball Fired At A Velocity Of 45.7 Mps Or 150 Fps At Specified Parts Of The Polycarbonate Lens And Should Be Tested By Placing Sample Eyewear On A Head Form. , Safety Helmet, Mediumsize , Head Band Size ( 540 -590 In Mm ) , First Aid Kit, Standard , Fire Extinguisher Co2, 2 Kg , Fire Buckets, Standard Size , A ) Compressor Unit Suitable For Pressure: 8 Bar, Delivery: 50 Lpm ( Or More ) , Reservoir Capacity: 24 Litres ( Or More ) , 230V, 50 Hz, With Pressure Regulator And Water Separator. B ) Pneumatic Trainer Kit, Each Consisting Of The Following Matching Components And Accessories:-01 Sets I. Single Acting Cylinder Max. Stroke Length 50 Mm, Bore Dia. 20 Mm -1 No Ii. Double Acting Cylinder Max. Stroke Length 100 Mm, Bore Dia 20 Mm, Magnetic Type -1 No Iii. 3 / 2-Way Valve Manually-Actuated, Normally Closed -2 Nos. Iv. 3 / 2-Way Valve Pneumatically-Actuated, Spring Return -1 No V. One-Way Flow Control Valve-2 Nos. Vi. 5 / 2-Way Valve With Manually-Operated Switch -1 No Vii. 5 / 2-Way Valve Pneumatically-Actuated, Spring Return -1 No Viii. 5 / 2-Way Pneumatic Actuated Valve Double Pilot -1 No Ix. 3 / 2-Way Roller Lever Valve Direct Actuation Normally Closed -2 Nos. X. Shuttle Valve ( Or ) -1 No Xi. Two-Pressure Valve ( And ) -1 No Xii. Pressure Gauge 0-16 Bar -1 Nos. Xiii. Manifold With Self-Closing Nrv, 6-Way -1 No Xiv. Pushbutton Station For Electrical Signal Input With 3 Illuminated Momentary-Contact Switches ( 1 No + 1 Nc ) And 1 Illuminated Maintained- Contact Switch ( 1 No + 1 Nc ) , Contact Load 2A -1 No Xv. Relay Station With 3 Relays Each With 4 Contact Sets ( 3No+1Nc Or Change-Over Type ) , 5 A -1 No Xvi. 3 / 2-Way Single Solenoid Valve With Led -1 No Xvii. 5 / 2-Way Single Solenoid Valve With Manual Override And Led -1 No Xviii. 5 / 2-Way Double Solenoid Valve With Manual Override And Led -1 No Xix. Power Supply Unit, Input Voltage 85 – 265 V Ac, Output Voltage: 24 V Dc, Output Current: Max. 4.5 A, Short-Circuit-Proof. -1 No Xx. Profile Plate, Anodised Aluminium 1100X700 Mm, With Carriers.C ) Pneumatic Workstation With 40 Square Mm Aluminium Profile Legs, Wooden Work Surface, And One Pedestal Drawer Unit Having 5 Drawers, Each With Handles And Individual Locks, On Metallic Full Panel Drawer Slide: ( 1 ) Worktable – Size ( Approx. ) L 1200Mm X W 900Mm X H 900 Mm, With Four Castor Wheels Including Two Lockable Wheels At The Front Side, ( 2 ) Drawer – Size ( Approx. ) – L460mm X W495mm X H158mm Each, And Overall Size Of Drawer Unit ( Approx. ) -L470mm X W495mm X H825m M And ( 3 ) Drawer Slide Height ( Approx. ) 85Mm. D ) Carrier For Mounting Components, Such As Pb & Relay Boxes. E ) Cut Section Model For Pneumatic Components, Mention In Item Description And , A ) Hydraulic Trainer Kit, Each Consisting Of The Following Matching Components And Accessories: I. Hydraulic Power Pack With ( 1 ) External Gear Pump Having A Delivery Rate Of 2.5 Lpm, ( Approx. ) @ 1400 Rpm Operating Pressure 60 Bar, Coupled To A Single-Phase Ac Motor ( 230 V Ac ) Having Start Capacitor And On / Off Switch And Overload Protection, ( 2 ) Pressurerelief Valve Adjustable From 0 – 60 Bar, ( 3 ) Oil Reservoir, =5 Litres Capacity Having Sight Glass, Drain Screw, Air Filter, Andp And T Ports. Ii. Pressure Relief Valve Pilot-Operated -1 No Iii. Drip Tray, Steel Size 1160 Mm X 760 Mm. -1 No. Iv. Pressure Gauge Glycerin-Damped, Indication Range Of: 0 – 100 Bars -1 No. V. Four-Way Distributor With Five Ports, Equipped With A Pressure Gauge -1 No. Vi. Double Acting Hydraulic Cylinder With A Control Cam, Piston Diameter16 Mm, Piston Rod Diameter10 Mm, Stroke Length 200 Mm. -1 No. Vii. Suitable Weight For Vertical Loading Of Hydraulic Cylinder -1 No. Viii. Mounting Kit For Weight For Realizing Pulling And Pushing Load. -1 No. Ix. 3 / 2-Way Directional Control Valve With Hand Lever Actuation. -1 No. X. 4 / 2-Way Directional Control Valve With Hand Lever Actuation. -1 No. Xi. 4 / 3-Way Directional Control Valve Closed-Centre Position, With -1 No.Hand Lever Actuation. - Xii. Non-Return Valve.-1 No. Xiii. Pilot-Operated Check Valve Pilotto Open. -1 No. Xiv. One-Way Flow Control Valve Withintegrated Check Valve. -1 No. Xv. T-Connector With Self-Sealing Coupling Nipples ( 2 Nos. ) And Quick Coupling Socket ( 1 No. ) .-2 Nos. Xvi. Profile Plate, Anodised Aluminium, 1100X700 Mm, With Carriers, Mounting Frames And Mounting Accessories ( To Be Fitted Onto The Hydraulic Workstation ) -1 Set B ) Hydraulic Workstation With 40 Square Mm Aluminium Profile Legs, Wooden Worksurface, Andonepedestaldrawer Unit Having 5 Drawers, Each With Handles And Individual Locks, On Metallic Full Panel Drawer Slide: ( 1 ) Worktable – Size ( Approx. ) L1200mmxw900mmxh900 Mm, With Four Castor Wheels Including Two Lockable Wheels At The Front Side, ( 2 ) Drawer – Size ( Approx. ) – L460mmxw495mm Xh158mm Each, And Overall Size Of Drawer Unit ( Approx. ) L470mmxw495mmxh825m M And ( 3 ) Drawer Slide Height ( Approx. ) 85Mm.C ) Cut-Section Models For Hydraulic Components , Mention In Item Description And
Basic Detail
Tender No ITIJGM(Strive)/NIT-05(e tender)/2021-22
Bidding Type Tender
Location
City jhargram
State West Bengal
Key Dates
Publish Date 17 Jan 2022
Submission Date 28 Jan 2022
Open Date 31 Jan 2022
Finance
Tender Value 49.48 Lakhs
Tender Fee 2000
EMD 30000
Exemption Not Available
Document List
Tendernotice_1.pdf
86208b3b-8528-4886-bb94-869003e6f6a6.html
BOQ_698002.xls

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jan 17, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Jan 28, 2022
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jan 28, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jan 31, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

Tendernotice_1.pdf

html

86208b3b-8528-4886-bb94-869003e6f6a6.html

xls

BOQ_698002.xls

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders