Military Engineer Services-MES has published Special Repair Work / Replacement Of Existing Old Convention Type High By Lights To Heavy Duty Industrial Led Lights At Work Shop Area ( Fad, Ced Aed ) Drone Sec , Air Circulators Into Led Based High Bay Light Fittings Drone Sec At 515 Abw And Provn. Submission Date for this Tender is 03-02-2022. LED Light Tenders in bangalore Karnataka. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Taking down old U/S 400watt sodium Vapour / Mercury Vapour high bay lights of any capacity complete all as specified and as directed. |
| 2 | S & F Surrounded Neo high efficiency round High bay in PDC houing suitable for industrial application. The Luminaire has efficacy of 110Lm/W with all accessories including connecting up with three core flexible copper conductor cable of suitable size and appx 2mtr hanging cable for highbay light fixtures complete all as specified and as directed. Make: Bajaj Cat Part No TENTO NXT B 165L WH NBSD 150W or equivalent make in Wipro / Philips. |
| 3 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing unserviceable materials and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed. |
| 4 | M&L for point wiring surface type with single core 1.5 Sqmm PVC insulated unsheathed single core multistranded copper conductor cable (FRLS)including 1.5 Sqmm PVC insulated unsheathedcopper conductor as earth continuity conductor drawn in and including ISI marked PVC casing caping not less than 20mm width with its accessories, and fixed in modular type steel sheet pressed terminal box covered with new 2.00 mm thick hylium sheet and brass screw with cup washers for fixing switches/sockets/regulators etc for one light/fan point controlled by one switch complete all as specified and as directed. |
| 5 | S&F switch piano, flush type single pole, one way 5 Amps complete all as specified and as directed. |
| 6 | M&L for sub main wiring with two runs of single core, PVC insulated, unsheathed multi stranded copper conductor cable of size 4 Sqmm, 1100 volts grade (FRLS) and one run of 4 Sqmm PVC insulated multi stranded copper conductor for earth continuityconductor drawn through existing PVC conduit complete all as specified and as directed. (Note :- Two runs of 4 Sqmm cable, one run of 4 Sqmm continuity earth wire will be measured as one length). |
| 7 | M&L for point wiring surface type with single core 4 Sqmm PVC insulated unsheathed single core multistranded copper conductor cable (FRLS)including 4 Sqmm PVC insulated unsheathedcopper conductor as earth continuity conductor drawn in and including ISI marked PVC casing caping not less than 20mm width with its accessories, and fixed in modular type steel sheet pressed terminal box covered with new 2.00 mm thick hylium sheet and brass screw with cup washers for fixing switches/sockets/regulators etc for socket outlet 15Amps on independent board complete all as specified and as directed. |
| 8 | S&F switch piano, flush type single pole, one way 15 Amps complete all as specified and as directed. |
| 9 | S&F switch socket combination 2 in 1, 3 pin, 5 Amps and 15 Amps flush type universal complete all as specified and as directed. |
| 10 | S & F Air Circulator 450mm, 100W, 1400RPM single phase of Make Bajaj Model No 250439 including electric connection complete all as specified and as directed. |
| 11 | Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr deep and getting out in hard / dense soil complete all as specified and as directed. |
| 12 | Returing filling in including, spreading, levelling,waterring and well remming in layers not exceeding 25 cms each complete all as specified and as directed. |
| 13 | Removal of surplus soil not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed. |
| 14 | M&L for sand cushning to under ground cable in layers ( 8 cm before laying the cable and 15 cm after laying the cable and punned into 18 cm thickness) in trenches for cable protection complete all as specified and as directed. Note: Punned thickness only shall be measured and paid. |
| 15 | Supply and lay burnt bricks of sub class "B" laid dry acrossin trenches for cable protection, locally available best quality, deisgnation 75 complete all as specified and directed. |
| 16 | Supply, laying and testing cable LT UG XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium sonductor of size 70 Sqmm 3.5 core complete all as specified and directed. |
| 17 | Supply, installation, testing and commissioning factory made, CPRI approved LT panel board out door type of size not less than 900 x 900 x 450mm powder coated made of 2.0mm thick CRCA sheet, weather and vermin proof with double stud hinged door front and back open with internally locking arrangement and externally locking arrangment with drop bolt, shutter type windows at both side of top and bottom duly internally secured with wire mesh, GI earthing strip stud at both bottom side, removable gland plate with compartmentalised cubical with 1.6mm thick CRCA sheet front opened double stud hinged door, all switch gears and changeover switch suitable to accommodate comprising of the following: |
| 18 | Incoming: |
| 19 | (i) MCCB 315Amps 25kA, 415 Volt, 50Hz, 4P with thermal based release - 1No (Make Indoasian / Havells / Legrand) |
| 20 | (ii) Digital Volt meter flush type with selector switch - 01Set |
| 21 | (iii) Digital Ammeter flush type with selector switch with CT"s - 04Nos |
| 22 | (iv) LED cluster indication lamp (R Y B) set of 03 - 1set. |
| 23 | (v) Busbar : Copper bus bar 3 phase 4 wire of 400 to 630Amps supported with ebonite insulation at 20cm interval - 1 set. |
| 24 | Out Going: |
| 25 | (i) MCCB 200Amps 16kA, 415volt, 50Hz, 3P with thermal magnetic release - 01No (Make: Indoasian / Havells / Legrand) |
| 26 | Supply, installation, testing and commissioning factory made, CPRI approved LT panel board out door type of size not less than 900 x 900 x 450mm powder coated made of 2.0mm thick CRCA sheet, weather and vermin proof with double stud hinged door front and back open with internally locking arrangement and externally locking arrangment with drop bolt, shutter type windows at both side of top and bottom duly internally secured with wire mesh, GI earthing strip stud at both bottom side, removable gland plate with compartmentalised cubical with 1.6mm thick CRCA sheet front opened double stud hinged door, all switch gears and changeover switch suitable to accommodate comprising of the following: |
| 27 | Incoming: |
| 28 | (i) MCCB 315Amps 25kA, 415 Volt, 50Hz, 4P with thermal based release - 1No (Make Indoasian / Havells / Legrand) |
| 29 | (ii) Digital Volt meter flush type with selector switch - 01Set |
| 30 | (iii) Digital Ammeter flush type with selector switch with CT"s - 04Nos |
| 31 | (iv) LED cluster indication lamp (R Y B) set of 03 - 1set. |
| 32 | (v) Busbar : Copper bus bar 3 phase 4 wire of 400 to 630Amps supported with ebonite insulation at 20cm interval - 1 set. |
| 33 | Out Going: |
| 34 | (i) MCCB 100Amps 16kA, 415volt, 50Hz, 3P with thermal magnetic release - 04Nos (Make: Indoasian / Havells / Legrand) |
| 35 | M&L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than2.25 Metre deep below ground level)with top edge of the plate not less than1.5 metrebelownormal ground levelconnected to galvanized iron strip 25 x 4 mm bymeans ofbolts, nuts check and washers ofGI or steel all as shown in electrical plate No. 3 of SSR Pt -Iconnected to earthingtest point all as specified or indicated including GI pipe 40 mm dia light grade for earth wire protection, necessary excavation,earth work in any typeof soil, PCC(1:3:6) type C-1 (with 20mm graded stone aggregate),chamberand50mm thick precast RCC (1:2:4) cover slab re-inforced with XPM Jalli including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete all as specified and as directed . |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
