Supply Install And Commissioing Of Wifi System Supply Installation, Testing Programming And Commissioning Of Wifi Access Points And Wired Network Backbone For The Access Points At Block C Of Barton Hill Hostel At Img Thiruvananthapuram.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Jan 2022
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thiruvananthapuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supply Install And Commissioing Of Wifi System Supply Installation, Testing Programming And Commissioning Of Wifi Access Points And Wired Network Backbone For The Access Points At Block C Of Barton Hill Hostel At Img Thiruvananthapuram.
BOQ
| Sl. No. | Item Description |
| 1 | A - Active components |
| 2 | 2.4Ghz Ceiling Mount AP - Supply and Installation of 300Mbps Wireless N Ceiling Mount Access Point with 2 x 4dbi internal antenna, Centralized Cloud / HW based Management, Intelligent Monitoring. PoE Support, Minimum transmission Power =19 dBm, Ceiling Mounting Kit. Approved Makes preferred: Cisco, Aruba, TpLink, Sophos or equivalent |
| 3 | 2.4Ghz + 5.0Ghz Dual Band Ceiling Mount AP - Supply and Installation of AC1350 Wireless MU-MIMO Gigabit Ceiling Mount Access Point with internal antennas, Centralized Cloud /HW based Management, and Intelligent Monitoring. PoE 802.3af Support, Minimum transmission Power =20 and =23 dBm, Ceiling Mounting Kit. Approved Makes preferred: Cisco, Aruba, TpLink, Sophos or equivalent |
| 4 | H/W AP Controller. - Supply and installation of H/W based Access Point Controller with minimum two network ports. This controller should be from the same manufacturer as the access point. Approved Makes preferred: Cisco, Aruba, TpLink, Sophos or equivalent |
| 5 | Distribution Switch - Supply of 24× gigabit RJ45 ports and 4× gigabit SFP Slots provide high-speed connections which helps route internal traffic for more efficient use of network resources, IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, L2/L3/L4 QoS and IGMP snooping., Web, CLI (Console Port, Telnet, SSH), SNMP, RMON, and Dual Image bring powerful management capabilities. Approved Makes preferred: Cisco, Aruba, TpLink, Sophos or equivalent |
| 6 | POE Switch 24 Port 250 W - Supply and Installation of 24× 802.3at/af-compliant PoE+ ports with a total power supply of 250 W*. provide high-speed connections which helps route internal traffic for more efficient use of network resources, IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, L2/L3/L4 QoS and IGMP snooping., Web, CLI (Telnet, SSH), SNMP, RMON, and Dual Image bring powerful management capabilities. Approved Makes preferred: Cisco, Aruba, TpLink, Sophos or equivalent |
| 7 | POE Switch 16 Port 250 W - Supply and Installation of 16× 802.3at/af-compliant PoE+ ports with a total power supply of 110 W*. provide high-speed connections which helps route internal traffic for more efficient use of network resources, IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, L2/L3/L4 QoS and IGMP snooping., Web, CLI (Telnet, SSH), SNMP, RMON, and Dual Image bring powerful management capabilities. Approved Makes preferred: Cisco, Aruba, TpLink, Sophos or equivalent |
| 8 | SPD - Supply and Installation of single phase SPD according to EN 61643-11, IEC 61643-11 should be atype 1 + type 2 / class I + class II, 230VAC, Lightning impulse current (10/350 µs) [L+N-PE] (Itotal)50 kA, Lightning impulse current (10/350 µs) [L-N]/[N-PE] (Iimp)25 / 50 kA, Voltage protecSupply and Installation of 300Mbps Wireless N Ceiling Mount Access Point with 2 x 4dbi internal antenna, Centralized Cloud / HW based Management, Intelligent Monitoring. PoE Support, Minimum transmission Power =19 dBm, Ceiling Mounting Kit. Approved Makes preferred: Cisco, Aruba, TpLink, Sophos or equivalenttion level [L-N]/[N-PE] (UP)= 1.5 kV / = 1.5 kV kV, TOV= [L-N] (UT) – Characteristic440 V / 120 min. – withstand, Temporary overvoltage (TOV) [N-PE] (UT) – Characteristic1200 V / 200 ms – withstand, Visual indication on L-N and N-PE, Approvals = KEMA, required metal enclosure, Approved Makes preferred: DEHN, Erico, ABB, Eaton or equivalent |
| 9 | Gigabit Media Convertor - Supply of Gigabit Single-Mode Media Converter with 1× 10/100/1000Mbps Auto-Negotiation RJ45 port supporting Auto-MDI/MDIX,Auto-negotiation of Half-Duplex / Full-Duplex transfer mode, Complies with IEEE 802.3ab and IEEE 802.3z, Extends fiber distance up to 20km. Makes preferred: Cisco, Aruba, TpLink, Sophos or equivalent |
| 10 | Programming, Policy framing, & Configuration charges- Programming, Configuration and linking charges. |
| 11 | B. Passive components |
| 12 | 15U Rack - Supply of 15U Rack with one shelf, PDU, Fan, Cable manager. Approved Makes Preferred: Rittal, APW President, Netrack, MAS Rack or equivalent |
| 13 | 9U Rack - Supply of 9U Rack with one shelf, PDU, Fan, Cable manager. Approved Makes Preferred: Rittal, APW President, Netrack, MAS Rack or equivalent |
| 14 | Unloaded 24Port Patch panel. - Supply of 1U Straight Patch Panel 24-Port, gray, empty, With a capacity of up to 24 connection modules shielded or unshielded. Exceed TIA /EIA 568.C.2, accepts class E/EA connection module, with optional rear cable manager. Approved Makes preferred: Molex, CommScope, Belden, R&M, or equivalent |
| 15 | Patch Panel IO - Supply of Connection Module, Cat.6, 1 x RJ45, unshielded,RJ45 connection module of Category 6, for the establishing of transmission channels of class E with up to 4 plugged connections, complies with Category 6 requirements of the standards ISO/IEC 11801:2002, EN 50173-1: May 2007,DIN-EN 50173-1: Dec. 2007 as well as ANSI/TIA/EIA 568-B.2-1, de-embedded tested in acc. with IEC 60603-7-4, interoperable and backwards compatible with Cat.5e and Cat.5.Suitable for 10GBase-T applications in acc. with IEEE 802.3an up to 500 MHz and 55 m.. Approved Makes preferred: Molex, CommScope, Belden, R&M, or equivalent |
| 16 | LIU 12Port - Supply 19\" rack mountable12 Port rack mountable complete steel housing fully powder coated LIU required 6 number of SC connectors having FR grade Nylon Cable grommets, ABS Splice Trays with fully cushioned splice holder containing grooves for fixing splice protection sleeves, , Cable Spools made upof flame retardant plastic, high impact resistance, stackable design for providing sufficient room for storage of excess cables, Blanking plates, necessary pigtails etc. 1 Nos Fiber Patch Cord , SC Duplex – SC Duplex, LSZH, metal-free, zero-halogen, flame-retardant, semi-tight buffer, gel-filled, E9/125µm, Singlemode (SM), Length (meter) 3.0, Standards like IEC 61754-4 should be met. Should be included. Approved Makes preferred: Molex, CommScope, Belden, R&M, or equivalent |
| 17 | 1KVA Double Conversion Online UPS. - Supply of 1KVA Double Conversion Online UPS with built in Battery and necessary mounting kit. Approved Makes preferred : Socomec, APC, Emerson or equivalent |
| 18 | Copper patch cord 1.0 Meter CAT6 - Supply of Patch Cord Cat.6, U/UTP, 4 Pair, Low Smoke Zero Halogen, Yellow, RJ45/u-RJ45/u 1m Cable should support Standardization Compliant with Cat.6 requirements of ISO/IEC 11801, EN 50173, EN 50168 and EIA/TIA 568.C.x. Approved Makes preferred: Molex,CommScope, Belden, R&M, or equivalent |
| 19 | PVC Back Box - Supply of PVC White back box 86 × 86 × 50 mm on which the wall plate AP is fixed. Approved Makes preferred: Vinay, ABB, Kolors or equivalent |
| 20 | 305Mtr CAT 6 B - Supply of Cat.6, U/UTP, 4 Pair, 23 AWG cable, 100 Ohm impedance, Standardization ISO/IEC 11801 ed. 2.2; IEC 61156-5 2nd ed.; EN 50173-1; EN 50288-6-1; TIA 568-C.2, Data transmission frequencies of up to 250 MHz Low Smoke Zero Halogen, Cable Box Length 305 m.. Approved Makes preferred: Molex, CommScope, Belden, R&M, or equivalent |
| 21 | Conduit Laying - Supply of Ivory / white color 25mm Medium ISI branded Pipe and Accessories including, junctions and fasteners. |
| 22 | 1.5 sqmm power cable wire- Supplying of 1.5 sq. mm 3 run FR PVC insulated (ISI Standard) copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. Preferred make: Finolex, Havells, Polycab or Equivalent |
| 23 | Electrical Switch & Socket - Supply and Installation of 3 module white/off white modular - S&F front plate on the 3-module molded plastic box/ Cable manager and fixing one electrical socket & on/off switch and giving necessary connections as required. Make: - Legrand, ABB or Equivalent |
| 24 | Labour Charges - Conduit laying, cable pulling, cable mapping charges |
AI Tender Summary
Tender Timeline
Jan 13, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJan 25, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 27, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender