Special Repair To Fire Alarm System And Provn Of Essential Work Services For Increase Power Load At Mothala Including Em Minor Works At Af Stn Naliya
Tender Value
27 Lakhs
Estimated cost
Bid Submission
02 Feb 2022
0 days left
EMD
54000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Naliya → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair To Fire Alarm System And Provn Of Essential Work Services For Increase Power Load At Mothala Including Em Minor Works At Af Stn Naliya
BOQ
| Sl. No. | Item Description |
| 1 | Supply & Fix in Replacement SFS1-CPU card of EST3x fire alarm panel with below specifications:Voltage 24 VDC, Current: Standby 115 mA at 24 VDC Alarm 115 mA at 24 VDC Relay outputs: Quantity 3 (alarm, supervisory, and trouble) UL type Common Contact arrangement Form CRating 30 VDC at 1 A resistive AUX power outputs: Quantity 2Voltage 24 VDC, resettable or continuous Current 1.0 A each circuit, 1.0 A total Data network (RS-485) Nodes 2 to 64 (requires optional network card) Performance class Class A or Class B Wire type Twisted pair, 6 twists per foot, min.Circuit length 5,000 ft. (1,524 m) between any three panelsCircuit resistance 90 O, max. Circuit capacitance 0.3 µF, max.Serial Port (RS-232) Annunciator port (RS-485)Performance class Class B and Redundant Class B Baud rate 9600 and 38400 Wire type Twisted pair, 6 twists per foot, min.Circuit length 4,000 ft. (1,219 m) Circuit resistance 90 O, max.Circuit capacitance 0.3 µF, max. |
| 2 | Supply & Fix in Replacement of PS10-4B Power Supply board of existing Edwards Fire Alarm Panel (EST3x) 3X-SFS1R Red. SMPS Specifications : Mains voltage 94 to 264 VAC, 50/60 Hz AC Input Current : Standby 1.5 amps, Alarm 3.0 amps.Brownout level 93 VRMS Battery charging capacity 65 Ah max. Total Power : Voltage 24vdc Standby Current : 88mA Alarm Current : 169mA Supply Ratings : Current 10 amps (UL), 9.0amps (ULC). Output voltage: Special: 24 Vdc, Regulated: 24 Vdc Output current Special: 3 amps, Regulated: 1.5 amps.Operating environment : Temperature 32 to 120 °F (0 to 49 °C) Relative humidity 0 to 93% noncondensing. |
| 3 | Supply & fix in Replacement of 4X-LCD Display unit of EST3x fire alarm panel with below specifications:Operating current:Standby Alarm 55mA 66mA LCD display Backlit liquid crystal display 240 x 320 pixels 24 lines of 40 characters Operating environment Temperature Relative humidity 32 to 120 °F (0 to 49 °C) 0 to 93% noncondensing. |
| 4 | Supply & Fix in Replacement of Loop card 3-SDC1 of EST3x fire alarm panel with below specifications: Voltage 24 VDC Operating current with fully loaded loop:Standby 3-SSDC1 144 mA; 3-SDDC1 264 mA Alarm 3-SSDC1 204 mA; 3-SDDC1 336 mASmoke power 19.95 VDC max.1 Circuit: Configuration Class B, Style 4, DCLB; Class A, Style 6, DCLA Capacity 125 Signature Series detectors and 125 Signature Series modules per SLC Resistance 100 O with 250 devices Capacitance 0.5 µF max.Wire size 12 AWG (1.5 mm²) max. Termination Removable plug-in terminal strips on the SFS1-CPU main board and Signature module Operating environment Temperature 32 to 120 °F (0 to 49 °C) Relative humidity 0 to 93% noncondensing. |
| 5 | Supply & fix in Replacement of SIGA-PHD MULTI DETECTOR with SIGA-SB DETECTOR BASE with below specifications: Multi-criteria optical smoke sensing technology• Integrates optical smoke with rate-of-rise heat sensing• Wide 0.5 to 4.36 %/ft. (1.6 to 13.6 %/m) smoke obscuration• Integrated nuisance rejection reducing unwanted alarms fromgeneral cooking particulates• Uses existing wiring• Listed to UL 268 7th edition• Automatic device mapping• Sensor Markings Provide Easy Testing Identification• Up To 250 Total Signature Addresses Per Loop• Two levels of environmentall compensation• Two levels of dirty detector warning• Twenty pre-alarm settings• Five sensitivity settings• Non-volatile memory• Electronic addressing• Automatic day/night sensitivity adjustment• Bicolor (green/red) status LED• Standard, relay, fault isolator, and audible mounting bases. |
| 6 | Supply & fix in Replacement of Sounder G1AVRF with below specifications:Sounder with mounting base, continuous normal operation for atleast 50 minutes with sound level 65db- 120db measured at 1.5m with sound output variation +5db complying with the specifications as appended below:-a) Power-12/ 24 V DC or 110 /220V AC, 1Ph, AC, 50Hzb) Range-1000 m. |
| 7 | Supply & fix in Replacement of I9105R Beam Detector with SIGA-CT2 module with below specifications: Protection Rating IP20 Power Voltage 24 VDC Standby Current 12 mA Alarm Current 22 mA Dimensions 206mmX95mmX95mm Relative Humidity 95%. |
| 8 | Supply & fix in Replacement of 3X-NET Network Card with the ability to network up to 64 nodes on an EST3 network. The card must support Class B, Class A, and Class X wiring.The 3X-NET adapter card provides two independent RS 485 circuits: one for network data communications and one for digital audio communications. |
| 9 | Manpower for Site Visit, Installation, Testing of hardware components, Commissioning of the entire system with Re-programming of Panel, spares, connecting accessories, Logic deveplopment for false alarm which comes from Addressable fire alarm control panel. Testing of each Multi detector installed in a loop and replace the faulty device with required ID tag. |
| 10 | Supply & Fix 12V/7AH SMF Battery for backup in-case of power failure. |
| 11 | Supply, install, testing and commisioning of \"SOLAR WATER SYSTEM\" (evacuated tube collector) based on indirect transferring of heat of capacity 100LPD complete all as specified & as directed.Note: Quoted rate shall also the cost of electrical back up, stainless steel hot water tank and steel structure for mounting of tank. |
| 12 | Supply and laying 25 mm bore GI pipe medium grade ISI marked including all fittings in old/new position as in walls and ceilling/trenches complete all as specified & directed. |
| 13 | S&F 25mm dia size stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or union complete all as specified & as directed. |
| 14 | S&F 15mm dia size bib taps cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule including 15mm dia PP-R pipe with reducer socket etc for connection complete all as specified & as directed. |
| 15 | S&F Rotational moulded polythyelene water storage tanks of capacity 250 ltr (cylindrical vertical with closed top) hoisted and fixed in position specified in SSR part-I complete all as specified & as directed. |
| 16 | S&F 3 layer PP-R (Polypropylene random copolymer) concealed pipe of size 20mm dia SDR 7.4 (PN-16) UV stabilzed and anti crobial fusion welded having thermal stability of hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid on wall, ceiling or on floor complete all as specified & as directed. |
| 17 | S&F stop valve of size 20mm dia PP-R (Brass insert) of any colour high pressure and fixed complete all as specified & as directed. |
| 18 | M&L for framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors ladders, framed balusters, walk ways, railing, framework of water tank (size of angle 75x50x6mm thick) and similar work confirming to Fe-290 grade E-165 complete all as specified & as directed. |
| 19 | M&L forPCC (1:3:6) type C-2 (by using 40 mm graded crushed broken stone aggregate) for mass concrete complete all as specified & directed. |
| 20 | S&F in repalcement submain wiring drawing through steel conduit with all accessories like tees, bends, elbows, reducers bell mouth tube ends and fixing accessories includingall fixtures /fittings fixed on wall/ceiling along with earth wire with FRLS PVC insulated copper conductor, single core cable in surface/ recessed as required of 2 x 4.0 sqmm single core and 1 x 2.5 sqmm as earth wire Complete all as Specified & directed. |
| 21 | M&L for sheet metal enclosures with socket and plug top and MCB single pole and neutral enclosure with two pin and earth plug and socket complete with one single MCB 20 amp 230 Volts complete all as specified & as directed. |
| 22 | Supply and install window air conditioning unit of capacity 2.0 TR with copper condensor coil inverter AC complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity as directed by EIC. |
| 23 | Supply and fixing/drawing wiring for Circuit / Submain wiring withPVC casing caping of suitable size inclusive of all tees, bends, elbows, reducers bell mouth tube ends and fixing accessories includingall fixtures /fittings fixed on wall/ceiling along with earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/ recessed as required of 2 x 6.0 sqmm and 1 x 4.0 sqmm as earth wire Complete all as Specified & directed. |
| 24 | M&L for chemical earthing complete with Copper earth plate electrode 90cmx60cm x 5 mm thick buried directly in ground vertically to depth not less than 3.00 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal groundlevel connected to and including Copper strip of 32x6mm as earth lead up to 7.5 mtr long fixed by means of bolts, nuts, check nuts and washers etc. of galvanised iron or steelincluding provn of GI protectionpipe light grade of 40mm bore and connected to earth strip earthing test point all as shown in electrical plate No.5 of SSR Part-I 2009 and as specified or indicatedand testing on completion including necessary excavation & earthwork in any type of soil, PCC (1:3:6) type C1 chamber, precast slab 50mm thick in cement concrete (1:2:4)type B1 (reinforced with welded steel wire fabric (XPM) of weight not less than 4kg/sqm) with frame, funnel with watering pipe of 15mm bore medium grade, wire mesh and lugs, test point including salt(150Kg Approx), Coal(100Kg Approx) & Magnesium sulphate(100 Kg Approx) including returning filling with cultivated soil from near by source etc. complete.Note: copper strip exceeding 7.5m long shall be measured & paid separately.The earth resistance value less than 1 ohm.Failing to achieve the value the contractor shall be re do the earthing without any extra cost. |
| 25 | Supply and fixing LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with 2x16 W 4feet all as directed by EIC. |
| 26 | Supply and fix Flame proof weather proof wall mounted fan of 450mm sweep all as directed by EIC. |
| 27 | Supply and fix Flame proof - weather proof switch socket & plug combined 16 A,250 V(2P+Earth) |
| 28 | Supply, installation, commis-sioning of Metal Top Deep Freezer single phase 240 volt, 50 Hz, 500 Ltrs capacity all as directed by EIC. |
| 29 | M & L for point wiring complete with 2.5 Sqmm PVC insulated and unsheathed cable single core multi stranded copper conductor, 1100 volts grade drawn through and including PVC casing / capping/ concealed, medium grade of any size with all accessories like bends, junction boxes etc including with 2.5 sqmm single core cable for one 3 pin socket outlet 15 Amps on independent switch board including 2.50 Sqmm as earth continuity conductor and connected to common earth dolly complete all as directed and specified. |
| 30 | M&L for switch socket outlet 2 in 1multipurpose 3 pin, 5/15 Amps combination controlled by one switch all as specified and directed. |
| 31 | Supply and install hi wall split units indoor/outdoor of capacity 2.0 TR with copper condensor coil inverter AC complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity as directed by EIC. |
| 32 | Supply and fix LED Flood light 200 W IP 65 all as directed by EIC. |
| 33 | M & L for point wiring complete with 1.5 Sqmm PVC insulated and unsheathed cable single core multi stranded copper conductor, 1100 volts grade drawn through and including PVC casing / capping, medium grade of any size with all accessories like bends, junction boxes etc including copper earth continuity wire ofPVC insulated of size 1.50 Sqmm and connected to common earth dolly with all accessories including sunken type pressedsteel terminal boxes 3mm thick hylam/ bakelite sheet, complete as specified for :One light point controlled by one switch |
| 34 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers all as directed b EIC. |
| 35 | Supply and fix Air circulator fan wall mounted, AC single Phase. 230V of size 450 mm sweep with, blades, and frame other accessories all as directed by EIC. |
| 36 | M&L for making hole in block masonry/stone wall of suitable size for fixing of exhaust fan 300 mm sweep including making good surface with smoothing of surface and painting of one coat of primer and one coat of paint as per existing paint at disturbed area all as directed by EIC. |
| 37 | M & L Earthing complete with Copper earth plate electrode 60×60cm.× 3.15 mm thick, burieddirectly in ground (earth pit not less than 2.25 metres deep below groundlevel) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to Copper lead strip 20x3 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as directed by EIC. |
| 38 | Supply & fix single pointed air termination Copper rod 12mm dia, 300 mm long all as directed |
| 39 | Supply & fix GI pipe of size 40 mm, 1.5 RM long medium grade 40mm dia vertically fixed by means of PCC 1:2:4 of size .6x.6x0.3 Cubic Feet for mounting of Copper air termination rod all as directed |
| 40 | Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 20 x 3 mm copper strip |
| 41 | Supply and fix Pedestal fans AC single phase 230/ 240 V of size 450 mm sweep all as directed by EIC. |
| 42 | Supply and fixing/drawing wiring for Circuit / Submain wiring withPVC casing caping of suitable size inclusive of all tees, bends, elbows, reducers bell mouth tube ends and fixing accessories includingall fixtures /fittings fixed on wall/ceiling along with earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/ recessed as required of 2 x 2.5 sqmm and 1 x 2.5 sqmm as earth wire Complete all as Specified & directed. |
| 43 | Supply and install hi wall split units indoor/outdoor of capacity 1.5 TR with copper condensor coil inverter AC complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 completed all as specified & directed. |
| 44 | Supply and install electronic wall mounting type voltage stabilizer suitable for AC upto 1.5 TR for automatic operation, single phase naturally air cooled indoor type and desingned for input variation between 170 volt to 250 volt with accuracy of +/- 2.5% and of capacity 4.0 KVA complete all as specified and as directed. |
| 45 | S&F refrigerator, electric driven(Single phase) capacity upto 195 Ltr BEE 5 star rated completed all as specified & directed. |
| 46 | Supply and fix Isolation transformer 5KVA, single phase, 50 Hz, Copper wound, air cooled, class of insulation A, metallic body duly powder coated designed for input Voltage range 240+-5% andoutput voltage range 240+-5%, Ratio 1:1, Vector Group :Dyn 11, Delta- star, indoor IP 42(CPRI Approval) efficiency more than 95%, separate neutral bushing shall be brought out for earthing. Potential difference between neutral to earth less than one volt with all standard fittings like digital temperature meter, adequate number of cooling radiators, lifting hooks one set, Earthing terminaltwo noscomplete withOver load /short circuit protection. |
| 47 | All as per item srl 46.00 above but of capacity 10 KVA |
| 48 | All as per item srl 46.00 above but of capacity 25 KVA |
| 49 | Material & Labour for sub main wiring with three runs colour coded (phase+neutral+earth) of single core multistranded copper conductor cable, of size 10 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including heavy duty PVC rigid conduit not less than 20mm dia with all necessary fittings fixed on wall/ceiling completeNote: (a)02 Runs of main cable and one run earth wire and one run of PVC conduit will be measured as one RM for payment. (b) Making good to distrubed walls, floors is deemed to be included in quoted rate. |
| 50 | S&F distribution boardmade out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 4 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 230 volts, double door type, fixed flush to wall ( for power points and AC socket) complete all as specified and directed. |
| 51 | S&F MCB’ssingle pole, 6 to 32 Amps, 230 volts with ‘C’ curve, fixed in sheet metal board complete including connecting. |
| 52 | S&F MCB’ssingle pole & neutral, 40 Amps, 230 volts with ‘C’ curve, fixed in sheet metal board complete including connecting. |
| 53 | S & F metal clad plug & socket board SP & N enclosure with 2 pole and earth metal plug & socket complete with 20 Amp MCB SPN, C curve complete |
| 54 | M&L for Earthing of machinery/equipment Installed at power house/substation, using 20 x 3 mm copper strip and copper plate of size 600x600x3.15 mm, as earth electrode (For Isolation Transformer and voltage stablizer) complete all as per specified and directed. |
AI Tender Summary
Tender Timeline
Jan 12, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 02, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 04, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender