Special Repairs To Certain Roads In Kamptee Under Ge Kamptee
Tender Value
Ref. Documents
Estimated cost
Bid Submission
02 Feb 2022
0 days left
EMD
76000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kamptee → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repairs To Certain Roads In Kamptee Under Ge Kamptee
BOQ
| Sl. No. | Item Description |
| 1 | Repairs to pot holes any depth, not exceeding 1 sqm each including sweeping free from dust with mechanical equipment and mud or water, scoring sunken surfaces in roads, paths etc by using pressure air ,cutting around edges to atleast 25mm in depth, making good by applying tack coat at 5 Kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm blinded with 0.09 Cum of stone chippings 6.3mm size and again well rammed (including supply of premixed bituminous macadam, binder and chippings), depth of pot holes exc 30mm complete all as specified and as directed. |
| 2 | Material & Labour for preparation of unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud, sweeping with brooms and finally fanning the cleaned surface with gunny bagsto remove loose dirt etc. complete all as specified and directed. |
| 3 | Material & Labour for applying evenly a priming/tack coat with bituminous primer using paving bitumen @ 10 kg per 10 Sqm on black top surface using mechanical sprayer complete all as specified and as directed |
| 4 | Material and labour for premix bituminous, macadam laid , rolled and compacted to required gradient and camber using 8 to 10 tonne power roller (consollidated thickness with paving bitumen (VG -30) any penetration laid / rolled and compacted to required gradient and camber(consolidated thickness 75mm or less) using binder content of 4% by weight of total mix, complete all as specified and directed. |
| 5 | Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with mechanical equipmentsand clean the surface by using pressure air to remove all loose dirt etc., complete all as specified and as directed. |
| 6 | Material & Labour for applying evenly a priming/tack coat with bituminous primer of paving bitumen @ 5 kg per 10 Sqm on existing black top surfaces/on existing surface before laying of Asphaltic semi dense concrete by using mechanical sprayer, complete all as specified and as directed. |
| 7 | Material & Labour for premixed asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content (minimum) by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all as specified and as directed. Note: The work should be executed by using hot mix plant and mechanical paver. |
| 8 | Material & Labour for preparation of road surface and applying thermoplastic reflective paint in marking of minimum 2.5 mm thick single coat as in center line and edge line road marking of 150/100 mm width using \"HOT MARK\" thermolastic modern propelled road marking machine as directed including all ingredients such as binder, glass beads Titanium dioxide calcium carbonate inter fillers thermoplastic requirement for glass beads shall be the table No. 800.4 of MORTH specification including spraying of glass beads etc., all as per manufacture instructions and as directedby Engineer-in-Charge. |
| 9 | Supply and fix Solar studs aluminium alloy and polycarbonate size 125x125x25 mm 6 LED with items all as specified and directed by Engr-in-Charge.Cat Part No. 110 of Dark Eye/ Cat part No. XTRS-03 of Akriti solar power or equivalent as approved by GE. |
| 10 | Surface dressing not exceeding 15cm deep and getting out in soft/loose soil for road side berms to required gradient complete all as specified and as directed. |
| 11 | Material & Labour for spreading moorum in road berms 100mm spread thickness for light wearing surface with moorum/Red Bajri,spread, rolled, consolidated to gradient and camber required , complete all as specified and directed. |
| 12 | Demolition of cement concreteof any description and in any position not otherwise specifically provided for as in copings, benching to roof including disposal off demolished material and rubbish out of the premises, complete all as specified and as directed |
| 13 | Material & Labour for 75 mm thickPCC 1 : 4 : 8 Type D-2 (using 40 mm graded stone aggregate), as in sub base of paths, hard standing and similar works, complete all as specified and as directed. |
| 14 | Material & Labour for machine pressed pre-cast concrete interlocking tiles paver block any shape, colour and size confirming to IS-15658-2006 of 60 mm thick M-35 grade with grey cement and pigment, complete all as specified and as directed. |
| 15 | M&L for sand filling under floors or in foundations including watering and consolidation, complete all as specified and as directed. |
| 16 | M&L for cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregates) as in foundations, filling hardstanding/ pavement and mass concrete complete all as specified and directed. |
| 17 | Supply and fix regular delineatorsmade out of MS pipe of 75mm dia with powder coating/stove enamelled paint, 120 cm long with 3 Nos 100mm wide prismatic / commercial AVERY DENSION 3M USA grade reflective sheeting colour coding as approved and provided with reinforced mesh complete all as specified, as directed and as per manufacturer\"s instructions. |
| 18 | Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.Make: As approved by GE. |
AI Tender Summary
Tender Timeline
Jan 12, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 02, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 03, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender